hey gang. have a samsung galaxy s2 i727 (at&t).
tried using the odin 1-click to install ics, but something happened, everything froze, and now i get the dreaded "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
kies won't read the phone, and i'm not sure how i can get into download mode to try and flash the original rom with Odin as some other threads are directing me to do. any advice would be greatly appreciated.
thanks!
Have you tried rebooting the phone with the charger attached?? That always puts me in download mode
Sent from my SAMSUNG-SGH-I727 using xda premium
i was able to get back to stock using odin 1.3. i'd much rather be on ics, but the 1-click odin isn't working for me.
i'll have to look around to see if i can get a tar of the rom.
thanks!
I went through the same thing. I just flashed the rom as soon as Odin recognize the phone and done deal
Sent from my SAMSUNG-SGH-I727 using xda premium
evantonio said:
hey gang. have a samsung galaxy s2 i727 (at&t).
tried using the odin 1-click to install ics, but something happened, everything froze, and now i get the dreaded "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
kies won't read the phone, and i'm not sure how i can get into download mode to try and flash the original rom with Odin as some other threads are directing me to do. any advice would be greatly appreciated.
thanks!
Click to expand...
Click to collapse
When the phone boots to "firmware encountered an issue message" you still in dl mode try the ics one click again or just push a custom recovery and flash a rom
Edit: if possible be sure to ALWAYS check md5 to ensure proper download. That goes for anything you flash to your phone :thumbup:
Sent from my SGH-I727 using Tapatalk 2
cdshepherd said:
When the phone boots to "firmware encountered an issue message" you still in dl mode try the ics one click again or just push a custom recovery and flash a rom
Edit: if possible be sure to ALWAYS check md5 to ensure proper download. That goes for anything you flash to your phone :thumbup:
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yup - figured out the DL mode thing. Just had a bit of a panic at first as the screen is pretty foreboding and it was my girlfriend's phone.
I went from, "Give me your phone, dear. I'm going to upgrade it and be your hero" to "Stop yelling. I didn't break your phone. Just give me a minute to figure out how to fix it."
My problem with the ICS one-click is that the program said it was done, but the phone just hung on the "downloading ROM screen" for 20 minutes. Now that I know how to fix the soft-brick, I want to try it again. The lady, however, doesn't seem too eager to hand over the phone. =]
Wait until she goes to sleep. Shell wake up to a surprise. :beer:
Sent from my SGH-I727 using Tapatalk 2
cdshepherd said:
When the phone boots to "firmware encountered an issue message" you still in dl mode try the ics one click again or just push a custom recovery and flash a rom
Edit: if possible be sure to ALWAYS check md5 to ensure proper download. That goes for anything you flash to your phone :thumbup:
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
thank you so much cd. its getting late and i too was attempting to make my wife's phone better, and i wasn't even thinking about that. i thought i was stuck since it said use kies and kies wouldn't recognize it
SR4130 said:
thank you so much cd. its getting late and i too was attempting to make my wife's phone better, and i wasn't even thinking about that. i thought i was stuck since it said use kies and kies wouldn't recognize it
Click to expand...
Click to collapse
Good search:thumbup:
Sent from my SGH-I727 using Tapatalk 2
Always use twrp for ROM flashing kies always has bugs flashing from phone is the best
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Related
Having a rather annoying problem.
I decided to give the ICS leak a try, and did as instructed: Cleaned the cache & system files in recovery after making a backup, booted into download mode, used Odin to install the ICS Leak. Everything was working flawlessly. Booted back into download mode to install CWM Recovery. After about 5 minutes of nothing happening, my computer BSOD'ed on me with a memory leak error.
Here's where the problem started; I rebooted my phone, and the download mode was different, the "error" version:
"ODIN MODE
Product Name: SGH-I727
Custom Binary: No
Current Binary: Samsung Official
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I've looked into it extensively, and tried several different methods. The first thing I tried was uninstalling the drivers on my computer, restarting, installing the drivers again, and reisntalling. Than I tried using the stock tar file for Odin. BDOD occurred with the same error.
Tried switching USB ports and USB cable, and doing the above again, but the same BSOD occurred.
I've also tried just flashing the stock Kernel, and again the same thing.
I've tried about 8, maybe 9 different methods. I've never had a BSOD on this computer (Asus G73SW running Windows 7). I'm not sure if I'm just having really bad luck, or doing something wrong, but I could really use some new recommendations on what to try. :/
Thanks!
Try a different computer. I can't see any reason ODIN would cause a BSOD. Has to be something on ur machine. Try killing everything on startup and disable any AV and give it another try.
<insert witty signature here>
I made the silly mistake of not checking the md5 when flashing ics. Got the same error. I had an incomplete version that was malfunctioning. Dont worry, its fixable. First off, use a different pc.Download the ics one click and flash again. Once running flash root with odin. The important thing is to use a different pc (its probably not odin)
Also, this is a dev section. Odds are this will be closed. Next time post in general or Q&A.
Sent from my SAMSUNG-SGH-I727 using xda premium
orionl said:
Having a rather annoying problem.
I decided to give the ICS leak a try, and did as instructed: Cleaned the cache & system files in recovery after making a backup, booted into download mode, used Odin to install the ICS Leak. Everything was working flawlessly. Booted back into download mode to install CWM Recovery. After about 5 minutes of nothing happening, my computer BSOD'ed on me with a memory leak error.
Here's where the problem started; I rebooted my phone, and the download mode was different, the "error" version:
"ODIN MODE
Product Name: SGH-I727
Custom Binary: No
Current Binary: Samsung Official
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I've looked into it extensively, and tried several different methods. The first thing I tried was uninstalling the drivers on my computer, restarting, installing the drivers again, and reisntalling. Than I tried using the stock tar file for Odin. BDOD occurred with the same error.
Tried switching USB ports and USB cable, and doing the above again, but the same BSOD occurred.
I've also tried just flashing the stock Kernel, and again the same thing.
I've tried about 8, maybe 9 different methods. I've never had a BSOD on this computer (Asus G73SW running Windows 7). I'm not sure if I'm just having really bad luck, or doing something wrong, but I could really use some new recommendations on what to try. :/
Thanks!
Click to expand...
Click to collapse
Wrong section
Sent from my SAMSUNG-SGH-I727 using Tapatalk
nrm5110 said:
Wrong section
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
skrambled said:
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
Click to expand...
Click to collapse
Lol.. gotta admit, worked on me ;-)
Sent from my SAMSUNG-SGH-I727 using xda premium
skrambled said:
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
Click to expand...
Click to collapse
I'm sorry I let you down lol I am TRYING to be nicer since people are getting butt hurt and calling me out as the lone troll haha I don't want to turn us into t989
Sent from my SAMSUNG-SGH-I727 using Tapatalk
skrambled said:
Nrm, I'm disappointed. Please unleash the flamethrower next time! It's the only way people learn...
Click to expand...
Click to collapse
I think you mean the ban hammer...:-D
rabbivj said:
I think you mean the ban hammer...:-D
Click to expand...
Click to collapse
I'm what you would call the banimal
Sent from my SAMSUNG-SGH-I727 using Tapatalk
I tried going back to gingerbread using Heimdall 1 click and it gives me a kernel error and failed. Now phone won't boot past the rogers logo. Any suggestions? No samsung screen. No green battery indicator when plugged in. Heimdall does detect the phone, and I've tried all USB ports and cords at my disposal. I use a mac so no access to odin. This is the first brick I haven't been able to get myself out of. Any help you would be appreciated
I am a gt i9000 owner, but can you get into download mode?
Sent by Santa Clause
If you can get download mode, then flash a gingerbread stock rom, even if it means you will lose root still do it, then flash a new rom of your choice, if you can get into download mode then you haven't got a brick
Sent by Santa Clause
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
http://forum.xda-developers.com/showthread.php?t=1293751
bigjoe2675 said:
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
Click to expand...
Click to collapse
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
teknhard said:
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
Click to expand...
Click to collapse
Hummmm..ok
Let's step back here does out prompt you for drivers?
....you might have to make a stop at your office..
Try different USB ports, I used heimdall yesterday to go back to gingerbread (so I could get the boot loaders) and I had the same problem as you, I finally got it to work with a different USB port and even then it kept failing...but I just kept trying and eventually it went through
(Pull battery, place battery back in, hold volume up and down, plug USB in-should put you in download mode...even if you can't see anything on your screen you can still enter download mode)
Sent from my SGH-I997 using XDA
DOesnt prompt me for drivers. It detects my phone and says ready to flash. I see the download mode screen. so its not completey screwed. Just can't get past the rogers logo.. I only have two USB on my macbook.. tried both quite a few times guess i'll mess with it some more. see if I can get it going. Thanks for the tips. ANy others ideas would also be appreciated
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
bigjoe2675 said:
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
Click to expand...
Click to collapse
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Sent from my SGH-I997 using Tapatalk 2 Beta-5
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Agreed. On my desktop (quad core 6 gb ram, watercooled blablablabl) can't run heimdal nor Odin to save its life.
My netbook (single core atom) took me back from CM9 with Odin like it was nothing.
My 7 year old laptop (running Ubuntu) works great using Heimdal (just run the .jar file as an executable)
theROMinator said:
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
bigjoe2675 said:
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
Click to expand...
Click to collapse
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
teknhard said:
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
Click to expand...
Click to collapse
I apologize wasn't directed to you just in general and your correct this forum is great...
Then reflash ics lol
Sent from my SGH-I997 using xda premium
threi_ said:
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
Click to expand...
Click to collapse
Because I don't have access to a PC for Odin, and the at&t should work to get me out of brick state. I currently can't get past rogers boot screen
GoSooners345 said:
Then reflash ics lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I don't have recovery.. otherwise I certainly would have
Hi, can somebody please help me?
I tried to use Odin to return from a custom rom to a stock rom and after following the instructions to do so, something happened and now im getting the following:
ODIN MODE
PRODUCT NAME: SGH-I727
CUSTOM BINARY DOWNLOAD: YES (1: counts)
CURRENT BINARY: CUSTOM
firmare upgrade encountered an issue.
Please select recovery mode in Kies & try again
and now my phone only boots to this message
.
I am using ODIN 1.85 and it seams like it can read my phone but gets stuck on <ID:0/004>Setup Connection...
I was following this instructions: http://forum.xda-developers.com/showthread.php?t=1652398
I have read similar theads but found that they get CUSTOM BINARY DOWNLOAD: NO and CURRENT BINARY:STOCK, tried to follow those instructions but im guessing its not working because its not the same issue
is there a way to fix this? please help... don't know what to do
What tar file are you using?
Sent from my SGH-I727 using xda premium
Upgrades just don't work via kies sometimes. But what stock TAR are you using?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
DrDoctor said:
Upgrades just don't work via kies sometimes. But what stock TAR are you using?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
im using SGH-I727-UCKJ2-k0nane.tar... and im trying to go from custom rom to stock
I have one that should work, but I'm not at my comp right now. I'll post it when I can.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
acviridiana said:
im using SGH-I727-UCKJ2-k0nane.tar... and im trying to go from custom rom to stock
Click to expand...
Click to collapse
go to sammobile. You may need to sign up but it's free. They have factory firmware for lots of phones. I've heard lots of bad stuff about k0nane tars.
Sent from my SGH-I727 using xda premium
stoopendis said:
go to sammobile. You may need to sign up but it's free. They have factory firmware for lots of phones. I've heard lots of bad stuff about k0nane tars.
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
I am hosting that stock tar on dev host. There are also a bunch on vincoms sticky thread, including mine.
No big deal, he's still in download mode.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
acviridiana said:
im using SGH-I727-UCKJ2-k0nane.tar... and im trying to go from custom rom to stock
Click to expand...
Click to collapse
Here's a UCLF6 TAR for ATT phones. Uploading to devhost.
http://forum.xda-developers.com/showthread.php?t=1785999
stoopendis said:
go to sammobile. You may need to sign up but it's free. They have factory firmware for lots of phones. I've heard lots of bad stuff about k0nane tars.
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
I believe k0nane's works fine except for the fact it trips the flash counter. Sammobile or the sticky threads pointed out are surely your best bet.
extreme noob here
Hey guys, I dont have the exact problem, but i do think my skyrocket i727 is also soft bricked. Ive been researching allot since i dont know too much, and i dont wanna risk my phone dying on me. Any help will be greatly appreciated. While at work (currently deployed, so i can't go into an AT&T store) i used my friends charger to charge my phone. Ok, i put it were all the sockets are, that i always use and have not had any issues with. And it didnt charge, so i plugged it into my friends laptop. I see on my phone the blinking battery, and continue to use my gtalk. Had to step out to work, disconnected the charger and continued on with my day. A few hours later i took my phone out and noticed it kept on vibrating while the screen was black. Took the battery off put it back and nothing. Then took the battery out for like 2 3 hours, and again nothing. It will jus go to the 1st samsung logo, then to the second and go black, then vibrates every other second. I'm going crazy because i dont have a memory card and am soo terrified of losing my pictures and videos. I have read and have had the guys i work with help me, and one friend downloaded the Odis program, but before i use it, i just want to make sure theres nothing else I can do. Again ive read the steps, understand them, but will it delete my pictures?? I apoligize for the length of my thread, just trying to give as much detail as possible. I have never tried to modify my phone, so its still in its original form. Please help. Thank you in advance. Have agreat day
Nohemy73 said:
Hey guys, I dont have the exact problem, but i do think my skyrocket i727 is also soft bricked. . Had to step out to work, disconnected the charger and continued on with my day. A few hours later i took my phone out and noticed it kept on vibrating while the screen was black. Took the battery off put it back and nothing. Then took the battery out for like 2 3 hours, and again nothing. It will jus go to the 1st samsung logo, then to the second and go black, then vibrates every other second.
Click to expand...
Click to collapse
u have a sticky power button, below is a copy from the 1 stop sticky,
[INFO] Skyrocket randomly restarts and vibrates at 2 second intervals ...... possible sticky power button and solution
[INFO] Another thread with a bootloop problem
[INFO] Video of Skyrocket randomly restarts and vibrates at 2 second intervals
you can also search for more threads using "sticky power button"
stoopendis said:
http://forum.xda-developers.com/showthread.php?t=1785999
Click to expand...
Click to collapse
ok, im currently getting ready to try and flash I727UCLF6_I727ATTLF6_ATT.zip fom sammobile... hope this works, becuase this phone sure scared the hell out of me and I don't want to be left with a 400dll brick.
acviridiana said:
ok, im currently getting ready to try and flash I727UCLF6_I727ATTLF6_ATT.zip fom sammobile... hope this works, becuase this phone sure scared the hell out of me and I don't want to be left with a 400dll brick.
Click to expand...
Click to collapse
Just follow Vincoms directions for using Odin to a T. Specially what to check in what box.
Sent from my SGH-I727 using xda premium
stoopendis said:
Just follow Vincoms directions for using Odin to a T. Specially what to check in what box.
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
Ok, so i'm statting to worry... its been a little over 10min and Odin is still on <ID:0/004> system.img.ext4
last time this happened, after 3 hours of waithing on this message, my phone I guess crashed because it started to disply the original message I posted.
What should I do?
its been 30 min now... should I wait? should I unplug the phone and start over or should I just close Odin and start over?
acviridiana said:
its been 30 min now... should I wait? should I unplug the phone and start over or should I just close Odin and start over?
Click to expand...
Click to collapse
Ya you need to figure out what has happened. Are you sure you have Odin setup correctly? you have the file in the right Box (PDA I think). Every other box unchecked except auto reboot..?
http://forum.xda-developers.com/showpost.php?p=28785461&postcount=1
You extracted the TAR file from the zip?
yes, I followed all instructions posted on http://forum.xda-developers.com/showthread.php?t=1652398 and even reinstalled the drivers before beginning.
its still stuck there...should I just unplug the phone and start all over or should I close Odin?
acviridiana said:
yes, I followed all instructions posted on http://forum.xda-developers.com/showthread.php?t=1652398 and even reinstalled the drivers before beginning.
its still stuck there...should I just unplug the phone and start all over or should I close Odin?
Click to expand...
Click to collapse
Yes I think you can safely disconnect. You don't have Kies running in the background? And your phone shows up in the the upper left small window of Odin?
yes kies is not even installed and the phone does show up in the upper left corner of Odin
i tried to root my samsung galaxy s blaze last night with odin....im stuck on a screen that says firmware upgrade encountered an issue..please select recovery mode in kies..its not that easy...i went through the process of rooting beforehand and it was totally stuck on the screen where it has the little bar that fills up...right after the flying andriod screen...lol...im so lost...can anyone help me out...thanks yo..
Hmm.. if it says that on Odin you're probably on force download mode. So I'd suggest you flash a stock firmware from Sammobile.com. (you'll just flash the PDA file which is in the tar) then you should try rooting again. I'd suggest you follow Erikmms' guide on the dev thread.
(P.S I know you pm'd me sorry for the delay. If you've anymore questions pleases feel free to pm me.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Start from 2.3.5 and root via Odin
nmadrid said:
i tried to root my samsung galaxy s blaze last night with odin....im stuck on a screen that says firmware upgrade encountered an issue..please select recovery mode in kies..its not that easy...i went through the process of rooting beforehand and it was totally stuck on the screen where it has the little bar that fills up...right after the flying andriod screen...lol...im so lost...can anyone help me out...thanks yo..
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
When installing firmare,rooted kernel and cwm.....dont do it in one visit to odin. Also make sure you dont have autoreboot checked or repartition when flashing the rooted kernel or cwm. :good:
nickmcminn60 said:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
When installing firmare,rooted kernel and cwm.....dont do it in one visit to odin. Also make sure you dont have autoreboot checked or repartition when flashing the rooted kernel or cwm. :good:
Click to expand...
Click to collapse
Just for my own curiosities sake, why not auto-reboot?
I'd recommend auto reboot. Then you don't have to go through the hassle of manual reboot from Odin.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Hello everyone and sorry to bother everyone but im in a pickle. Im new to rooting and I was following this on YouTube by qbking77 called "How to Install Clockworkmod Recovery on the Samsung Infuse 4G " video.
So what my problem is that when i placed the modified 3e recovery file in the bin folder and tried to restart my Samsung infuse 4g through the clockworkmod recovery restart it will now only boot to the Samsung screen. I believe I may have somehow placed the wrong or a corrupted 3e recovery file into the directory.
I have searched many other forums to no avail if anyone could help i would be eternally grateful.
Check the super everything thread for either a heimdall or Odin return to stock package. Download and run them with the phone in download mode. You can even get packages with CWM preinstalled.
Sent from my SGH-I997 using xda premium
InsaneDDay69 said:
Check the super everything thread for either a heimdall or Odin return to stock package. Download and run them with the phone in download mode. You can even get packages with CWM preinstalled.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Thank you very much for the advice! I'm trying heimdall right now but the zadiag is not recognizing my infuse. I have connected and in download mode but when going under list all device there is no Samsung.
I have been trying odin instead and I am running into the same error. I have installed drivers through kies mini but odin will not recognize the device either.
Zann3113 said:
Thank you very much for the advice! I'm trying heimdall right now but the zadiag is not recognizing my infuse. I have connected and in download mode but when going under list all device there is no Samsung.
I have been trying odin instead and I am running into the same error. I have installed drivers through kies mini but odin will not recognize the device either.
Click to expand...
Click to collapse
I had no luck with Odin either. Check your windows device manager and see what shows up when you plug the phone in. It doesn't always show as Samsung, but something should come up that you can use to install drivers. Best of luck getting things back to running
Sent from my SGH-I997 using xda premium
InsaneDDay69 said:
I had no luck with Odin either. Check your windows device manager and see what shows up when you plug the phone in. It doesn't always show as Samsung, but something should come up that you can use to install drivers. Best of luck getting things back to running
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
THANK YOU!! I mean really i had been going back and forth with drivers and now I have it fixed with all of you guys helpp thank you very much!:laugh:
Zann3113 said:
THANK YOU!! I mean really i had been going back and forth with drivers and now I have it fixed with all of you guys helpp thank you very much!:laugh:
Click to expand...
Click to collapse
Glad to hear it
Sent from my SGH-I997 using xda premium