Related
Just what everyone wants.... another thread about a bricked phone.
I have no idea what happened to my phone.... I have been running Valhalla Final for a week now with no issues to speak of and lost all my ringer tones after a failed attempt to put sound on a boot-loader using Absolute System. I rebooted into recovery and tried to restore my nandroid which failed when it said unable to unmount system. when I rebooted it had fc in android.core multiple times so I rebooted again and after it loaded had no control. did a battery pull and then would not go past the power up screen. downloaded heimdall one click file T959V-UVKJ6-One-Click.jar and put it into download mode. flashed and it went fine until factoryfs failed. now still in download but img is pic of phone to computer. last 2 attempt was
SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar and it failed first at loading the modem and then at loading recovery.
I am lost. seems like everything I try makes it little worse. Have not tried ODIN yet.
Is there any hope or am I out a phone?
Give Odin a try. Last time I used Odin it froze so I pulled the plug, and when I put my phone back in download it showed that same screen, yet Odin still went through.
So no, that screen doesn't mean you're out a phone.
Sent from my SGH-T959V using xda premium
95Z28 said:
Give Odin a try. Last time I used Odin it froze so I pulled the plug, and when I put my phone back in download it showed that same screen, yet Odin still went through.
So no, that screen doesn't mean you're out a phone.
Click to expand...
Click to collapse
I was hoping to hear that... what odin file do you suggest... A lot of the links are now dead.
ShadyAce80 said:
I was hoping to hear that... what odin file do you suggest... A lot of the links are now dead.
Click to expand...
Click to collapse
Grab chadster's KG4 here. I believe it has ODIN 1.85 included in the file. Don't mess with any of the check boxes in ODIN; let ODIN decide what to check.
After that, you should be able to get back to KJ6 via a one-click.
Shady grab Ravers stock GB and honks GB odin kernel. Flash Ravers, If you can, then honks. That will give you stock plus cwm. You know where to go from there. Funny thing is just yesterday FB had a post about leaving BOOTLOADERS alone w/o unbrickable mod. Good luck.
Downloading now from sendspace.com
I'm hoping this works...
hechoen said:
Funny thing is just yesterday FB had a post about leaving BOOTLOADERS alone w/o unbrickable mod. Good luck.
Click to expand...
Click to collapse
LOL yeah I read that AFTER the fact... I have been messing with the animations for a few days with out issue... it was only after I trying sound for a day or two that I crashed.
Live and Learn
ShadyAce80 said:
Downloading now from sendspace.com
I'm hoping this works...
Click to expand...
Click to collapse
wait no dude i downloaded that one from sendspace does the download stop and download stop download etc... for you? it did for me i think the files corrupt thomas.raines gave me a newer download link that one from sendpsace is like 197mb the one thomas gives me is 300mb and he said dont flash pit file (he did not include ) because is risky try this one first!!! i tried the sendspace one and it stop at setup connection...
http://dl.dropbox.com/u/54863010/T959VUVKG4.zip
shady
Are you going with the chadsters leak or ravers stock?
I don't know why you guys keep recommending old (leaked) ROMs to debrick with.
@Shady if you see anything posted by myself, dsexton, bhundven or raverx3x you can bet that we've tested it extensively and that it'll work on your phone.
On that note I recommend you read the whole page here:
http://forum.xda-developers.com/showthread.php?t=1358498
Download from the SMS KJ6 (beta2d) Kernel Stock Rom with Bootloaders link. This will get you a one click flash solution that you can go back to when you have problems. This, unlike the KG4 file others have been recommending, is the latest version of gingerbread (KJ6 is 2.3.6) and you'll have a custom kernel + root to boot so you can get flashing other gingerbread ROMs. I hope you don't have trouble flashing, and if you do, read the OP to what I linked you to. All the instructions are there.
I know this file has been failing for you but you can try restarting your computer and flashing it from safe mode. When your computer is booting up, keep pressing F8 until you get a menu. Pick "Safe mode with networking" from the menu using your arrow keys and press enter.
sorry too many tabs open
FBis251 said:
I don't know why you guys keep recommending old (leaked) ROMs to debrick with.
Click to expand...
Click to collapse
Only because he was failing with one-clicks and wanted to use ODIN. That one (KG4) has always worked for me, so I was basing it off of experience. Never claimed it was optimal
I know this file has been failing for you but you can try restarting your computer and flashing it from safe mode. When your computer is booting up, keep pressing F8 until you get a menu. Pick "Safe mode with networking" from the menu using your arrow keys and press enter.
Click to expand...
Click to collapse
Never thought about trying it from safe mode. Nice idea.
FBis251 said:
I don't know why you guys keep recommending old (leaked) ROMs to debrick with.
Click to expand...
Click to collapse
That's what I'm saying. I don't use heimdell(because my computer hates it for some reason). So ravers stock GB and honks kernel to get cwm works well to set me back up.
ShadyAce80 said:
glad you posted this. download just completed. i haven't done anything with this file yet... will follow your link.
Click to expand...
Click to collapse
oh after they say to flash the bhuvden kernel well that is what they told me to get rid of gremlines or something, then flash the custom rom, youll have cwm and such, tell me how it goes .
To all of you thank you very much for your help... I think I have my phone back.... Our fembot Linda is doing her thing right now...
@FB I tried one click method in safe-mode and it was unable to find the drivers even after reinstalling a few times.. restarted in normal mode and gave it one more shot and I now have my phone back.
Thanks again for all the help.
hechoen said:
That's what I'm saying. I don't use heimdell(because my computer hates it for some reason). So ravers stock GB and honks kernel to get cwm works well to set me back up.
Click to expand...
Click to collapse
I totally forgot he made a stock ODIN. My bad!
I really need to rewrite the starter pack to have heimdall one click instructions. Nobody ever got around to making it.
I've only given the guide a cursory look at times, but I'd be willing to draft something for the guide if thst helps keep you focused on developing.
Sent from my SGH-T959V using xda premium
stephen_w said:
I've only given the guide a cursory look at times, but I'd be willing to draft something for the guide if thst helps keep you focused on developing.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
A video would be perfect. Been busy with school since I just started and now I got a gig making a website so I'm also working on that.
FBis251 said:
A video would be perfect. Been busy with school since I just started and now I got a gig making a website so I'm also working on that.
Click to expand...
Click to collapse
I've never done the video thing. Guess I can research it and give it a go.
FIXED- I found the stock ODIN Rogers file rooted and that got me going.
The unbrick ROM does NOT work for ROGERS phones.
Hello Everyone,
Problem: Infuse will boot up and you see the ATT screen then 2 seconds later it sits on the SAMSUNG screen.
I have tried just about everything posted. I even tried the Infuse unbrick Odin pkg.
I CAN get into download mode. I can flash with ODIN. But upon reboot the phone goes back to the SAMSUNG screen.
How did I get here?
I had was running ZEUS. I had the issue with ppl not hearing me unless I turned speakerphone on and off for every call. I did a master reset. I had an issue with something else so I tried using a CWM flashable file which caused the problems needing the master reset.
I have tried many things but I am stuck.
I am trying to get an ODIN kernel that is moded like the V8 community kernel BUT all the links are broken.
droiduzr2 said:
Hello Everyone,
Problem: Infuse will boot up and you see the ATT screen then 2 seconds later it sits on the SAMSUNG screen.
I have tried just about everything posted. I even tried the Infuse unbrick Odin pkg.
I CAN get into download mode. I can flash with ODIN. But upon reboot the phone goes back to the SAMSUNG screen.
How did I get here?
I had was running ZEUS. I had the issue with ppl not hearing me unless I turned speakerphone on and off for every call. I did a master reset. I had an issue with something else so I tried using a CWM flashable file which caused the problems needing the master reset.
I have tried many things but I am stuck.
I am trying to get an ODIN kernel that is moded like the V8 community kernel BUT all the links are broken.
Click to expand...
Click to collapse
Seems obvious to a rookie like me, but shouldn't you just use GTG's ultimate unbrick back to D5 stock and go from there?
droiduzr2 said:
I have tried just about everything posted. I even tried the Infuse unbrick Odin pkg.
Click to expand...
Click to collapse
Hmm... EVERYTHING?? I dunno about that... 2 second search bro.
http://forum.xda-developers.com/showthread.php?p=22459950
Really 5 hrs?
Sent from my SGH-I997 using XDA App
SnowBeer said:
Seems obvious to a rookie like me, but shouldn't you just use GTG's ultimate unbrick back to D5 stock and go from there?
Click to expand...
Click to collapse
I wrote that in my OP that I tried the ultimate unbrick with ODIN still stuck on Samsung Screen.
Erik_T said:
Hmm... EVERYTHING?? I dunno about that... 2 second search bro.
http://forum.xda-developers.com/showthread.php?p=22459950
Click to expand...
Click to collapse
I said I needed ODIN files...if I am stuck ont he SAMSUNG screen it means NO CWM for me. The links in the original community kernel thread are broken and several ppl have contacted the OP including me asking to fix the links.
droiduzr2 said:
I said I needed ODIN files...if I am stuck ont he SAMSUNG screen it means NO CWM for me. The links in the original community kernel thread are broken and several ppl have contacted the OP including me asking to fix the links.
Click to expand...
Click to collapse
Soo....
Erik_T said:
YES THERE IS! God. MediaFire Y U take so long!
Mirror for Odin. All credits to GTG. I am going to pm him to ask him to add it to the op.
http://www.mediafire.com/?c85mj690uk5vaw5
Thanks >>
Click to expand...
Click to collapse
Posted http://forum.xda-developers.com/showthread.php?t=1112555&page=17
And that is the "original" community kernel.. Dunno why you'd say it's not?
---------- Post added at 04:04 PM ---------- Previous post was at 04:02 PM ----------
Ltilt2 said:
Really 5 hrs?
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
Yeah.. I dunno about that...
Guys, I already posted that I tried that NO GO
I need the files from here BUT the links are broken
http://forum.xda-developers.com/showthread.php?t=1119598
I think I can get it working again with a kernel that will convert to ext4.
I can not get into the phone to delete or change the voodoo lagfix.
It seems that the boot partition is not working right.
I can flash with ODIN the unbrick file and it will install but upon reboot still stuck at samsung screen. I can NOT get into recovery either.
WTF? Did I make a brick?
Someone has to know how to fix this
droiduzr2 said:
Guys, I already posted that I tried that NO GO
I need the files from here BUT the links are broken
http://forum.xda-developers.com/showthread.php?t=1119598
I think I can get it working again with a kernel that will convert to ext4.
I can not get into the phone to delete or change the voodoo lagfix.
It seems that the boot partition is not working right.
I can flash with ODIN the unbrick file and it will install but upon reboot still stuck at samsung screen. I can NOT get into recovery either.
WTF? Did I make a brick?
Someone has to know how to fix this
Click to expand...
Click to collapse
Dude.. if you can't figure this out with those links that I posted, then I don't think that I can help you.. I can somehow manage to odin myself and bring myself back to a rom with those files and the respective rom. And I know that there are other people that can too... good luck bro.. I'm done..
Edit: May I suggest this?
Edit 2: Actually, if you need the 3e recovery file. I just remembered that you need that too. Haven't seen a mirror posted for that. Maybe that is the element that you are missing? If it is lemme know..
It is really quite on xda today
Flash any GB kernel that's rooted, but uncheck reboot.
Then try to boot to recovery.
Sent from my SAMSUNG-SGH-I997 using xda premium
Thamma513 said:
It is really quite on xda today
Click to expand...
Click to collapse
Kinda random place to put that bit I agree.
Truckerglenn said:
Flash any GB kernel that's rooted, but uncheck reboot.
Then try to boot to recovery.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Try Entropy's DD
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Erik_T said:
Dude.. if you can't figure this out with those links that I posted, then I don't think that I can help you.. I can somehow manage to odin myself and bring myself back to a rom with those files and the respective rom. And I know that there are other people that can too... good luck bro.. I'm done..
Edit: May I suggest this?
Edit 2: Actually, if you need the 3e recovery file. I just remembered that you need that too. Haven't seen a mirror posted for that. Maybe that is the element that you are missing? If it is lemme know..
Click to expand...
Click to collapse
I am well aware of using this stuff. I flashed many phones and tablets hence why I like Samsung.
Yes, can you provide me the 3e Recovery ODIN file.
That would be a good thing to try.
Truckerglenn said:
Flash any GB kernel that's rooted, but uncheck reboot.
Then try to boot to recovery.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I can only use ODIN files because I can ONLY get into download mode. I can NOT get into recovery to use any CWM files.
I have been trying to find ODIN kernel files but the ones available the download links are broken and I pm'd the OP as well as others that need the files but still no luck yet.
Can someone please post an ODIN kernel for me to try.
Edit:
Just to be clear I have now flashed the Unbrick ROM several times. It will load up and install. I get a green pass in ODIN but on reboot I see the ATT screen then stuck at the Samsung screen.
I have started to flash odin kernels from my captivate and tablet. They do get past the ATT screen and no Samsung screen but all I see is grainy stuff all over SO that tells me that changes are being made. I just need to try with an INFUSE ODIN kernel that might convert to ext4. I think that will solve the problem.
btw- thanks for the help...I am just ticked trying to get my phone to work.
I just need one damn file or small command to wipe the phone so it will take the stuff we are trying to push.
FIXED- I found the stock ODIN Rogers file rooted and that got me going.
The unbrick ROM does NOT work for ROGERS phones.
I went through the same thing about a month ago on mine... I eventually found the same file you did... it was a pain and since then if I've bricked I've flashed ultimate unbrick then flashed stock Rogers and it resolves my issue... I keep both saved on my computer now
Sent from my SAMSUNG-SGH-I997R using Tapatalk
So.. you're good? Yes? Problem solved? Close thread...?
Sent from my A500 using Tapatalk
Simple Fix...
Use. GTG's ultimate unbrick.
Download http://www.mediafire.com/?i57410xodydx5l1
Follow the easy steps.
This will bring to how you bought the phone.
SECOND to all with BLACK screens.
Turn off the phone using power and volume up and down.
While plugging in the phone to the USB. Release power button.
This may take multiple tried, but you will get the download screen eventually.
Its all about timing.
YOUR PHONE CAN NOT BE BRICKED.
The down loader is not on the internal memory,
it is on a FLASH ROM separate from everything else.
Thanks to "secretasianman"
Original:http://forum.xda-developers.com/showpost.php?p=22404594&postcount=392
People need to remember that not everyone is using AT&T Infuse, gotta clarify that before posting guides.
And yeah keep the stock rogers rooted rom on your desktop, comes in handy for a quick return to stock if anything goes wrong.
I tried going back to gingerbread using Heimdall 1 click and it gives me a kernel error and failed. Now phone won't boot past the rogers logo. Any suggestions? No samsung screen. No green battery indicator when plugged in. Heimdall does detect the phone, and I've tried all USB ports and cords at my disposal. I use a mac so no access to odin. This is the first brick I haven't been able to get myself out of. Any help you would be appreciated
I am a gt i9000 owner, but can you get into download mode?
Sent by Santa Clause
If you can get download mode, then flash a gingerbread stock rom, even if it means you will lose root still do it, then flash a new rom of your choice, if you can get into download mode then you haven't got a brick
Sent by Santa Clause
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
http://forum.xda-developers.com/showthread.php?t=1293751
bigjoe2675 said:
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
Click to expand...
Click to collapse
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
teknhard said:
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
Click to expand...
Click to collapse
Hummmm..ok
Let's step back here does out prompt you for drivers?
....you might have to make a stop at your office..
Try different USB ports, I used heimdall yesterday to go back to gingerbread (so I could get the boot loaders) and I had the same problem as you, I finally got it to work with a different USB port and even then it kept failing...but I just kept trying and eventually it went through
(Pull battery, place battery back in, hold volume up and down, plug USB in-should put you in download mode...even if you can't see anything on your screen you can still enter download mode)
Sent from my SGH-I997 using XDA
DOesnt prompt me for drivers. It detects my phone and says ready to flash. I see the download mode screen. so its not completey screwed. Just can't get past the rogers logo.. I only have two USB on my macbook.. tried both quite a few times guess i'll mess with it some more. see if I can get it going. Thanks for the tips. ANy others ideas would also be appreciated
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
bigjoe2675 said:
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
Click to expand...
Click to collapse
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Sent from my SGH-I997 using Tapatalk 2 Beta-5
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Agreed. On my desktop (quad core 6 gb ram, watercooled blablablabl) can't run heimdal nor Odin to save its life.
My netbook (single core atom) took me back from CM9 with Odin like it was nothing.
My 7 year old laptop (running Ubuntu) works great using Heimdal (just run the .jar file as an executable)
theROMinator said:
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
bigjoe2675 said:
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
Click to expand...
Click to collapse
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
teknhard said:
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
Click to expand...
Click to collapse
I apologize wasn't directed to you just in general and your correct this forum is great...
Then reflash ics lol
Sent from my SGH-I997 using xda premium
threi_ said:
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
Click to expand...
Click to collapse
Because I don't have access to a PC for Odin, and the at&t should work to get me out of brick state. I currently can't get past rogers boot screen
GoSooners345 said:
Then reflash ics lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I don't have recovery.. otherwise I certainly would have
I was caught in a boot loop and tried to re flash, when in my haste I forgot that Odin will recheck partition when loading .Pit files (pretty lame feature)
Still it was my fault for clicking start in haste.
**phone was partitioned, and would not go into download mode, it was stuck in a screen that said "Firmware update error, please restore in Kies", but it wouldn't connect to kies**
I sent my phone to XDA member Connexion2005
http://forum.xda-developers.com/member.php?u=1602851
I haven't got it in my hands yet, but he just told me it was fixed, I can't wait to get it back and leave it the hell alone (until someone makes CM7 or better work on it)
anyhow, this is out there so if you do what I did (DON'T) there's a solution. Set me back $50 plus shipping to TX from NYC but still, I didn't have to get a whole new phone.
for 50 bucks im sure k0nane would have made an uberfixit tar :/
shabbypenguin said:
for 50 bucks im sure k0nane would have made an uberfixit tar :/
Click to expand...
Click to collapse
Absolutely.
shabbypenguin said:
for 50 bucks im sure k0nane would have made an uberfixit tar :/
Click to expand...
Click to collapse
Please elaborate. Not finding much info on this "uberfixit", but it sounds like it's some method of re-creating the stock filesystem that's flashable in odin?
I was putting this out there, because I'm not the only one that this will happen to.
yea it happens when you repartition, an uberfixit requires a complete dump of the phone and quite a bit of time, but will completely fix what you described
the problem with repartitioning is that it wipes the phone clean and then starts to reinstall everything, problem is neither one of teh tars has the full dump (we do it for the sake of saving actual bricks)
knowing someone who can jtag is great we have had a few epic 4g touches that crashed and burned and were saved via jtag.
shabbypenguin said:
yea it happens when you repartition, an uberfixit requires a complete dump of the phone and quite a bit of time, but will completely fix what you described
the problem with repartitioning is that it wipes the phone clean and then starts to reinstall everything, problem is neither one of teh tars has the full dump (we do it for the sake of saving actual bricks)
knowing someone who can jtag is great we have had a few epic 4g touches that crashed and burned and were saved via jtag.
Click to expand...
Click to collapse
You may not remember, but I did go onto your IRC and spoke with you regarding this issue.
oh sorry, the irc channel we have is for a bunch of devices currently we house blaze 4g, attain 4g, conenct 4g, lucid and optimus m+ owners. so i probably thought you were an attain owner since we have had a good number of attain owners repartition as well :/
shabbypenguin said:
oh sorry, the irc channel we have is for a bunch of devices currently we house blaze 4g, attain 4g, conenct 4g, lucid and optimus m+ owners. so i probably thought you were an attain owner since we have had a good number of attain owners repartition as well :/
Click to expand...
Click to collapse
it's all good, bottom line is I f'd up my device, but now its fixed.
um...yeah...
So i did the exact same thing as you... Been trying to find anyone who can help me out. Is there anyway I can fix it myself? I haven't found a single place in my whole state that can fix the problem. If at all possible, I'd like to avoid sending it out for repair.
So how do I get this uberfixit?
I stupidly re-partitioned using Odin, also: I did not realize that Odin re-checked the check box -even after unchecking- when a new pda file was loaded. My bad. Totally though it was bricked until i was able to flash this stock gingerbread rom, but now kies says that my Blaze S does not qualify for upgrades... Did the re-partitioning do this?
I can no longer get to the recovery screen, although if I restart my blaze while connected to a pc via usb, it does allow the "re-install OS?" page to display, and I can get to recover from there: But absolutely no more access to the recovery "menu" which allows me to wipe cache/restore to factory/etc.
Just Odin cwm back then flash away
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Thanks for the quick reply; I will try that right now: My fingers are crossed.
2vivid said:
Just Odin cwm back then flash away
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
thomassino said:
Thanks for the quick reply; I will try that right now: My fingers are crossed.
Click to expand...
Click to collapse
It's just a soft brick, I have done that at least 10 times.
Will you make this?
k0nane said:
Absolutely.
Click to expand...
Click to collapse
Hi, k0nane I too have bricked my phone due to not unchecking re-partition. Now no matter what I do the phone displays the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. It is frustrating. I will certainly pay you if you make a fix for this that I can flash in odin! I don't care if it wipes my phone completely as I was trying to flash a new rom anyways. Please reply I'm desperate to get this thing working again.
runboyrun said:
Hi, k0nane I too have bricked my phone due to not unchecking re-partition. Now no matter what I do the phone displays the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. It is frustrating. I will certainly pay you if you make a fix for this that I can flash in odin! I don't care if it wipes my phone completely as I was trying to flash a new rom anyways. Please reply I'm desperate to get this thing working again.
Click to expand...
Click to collapse
That's a soft brick.
No need to pay anyone lol just pull the battery and go back to download mode (for Odin) again and revert back to stock. A quick search through 'bricked' type threads would have netted this info :thumbup:
Sent from my SGH-T769 using xda app-developers app
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
yup your bootloader is still locked
check the downloads thread and use version 1.2.
That means your boatloader is locked. You now must Odin back to stock and start over. Droid style has a guide stickied in the development thread. Follow section 6 of it.
Next time use ez unlock version 1.2 to unlock you boatloader.
Sent from my SGS3 running Eclipse 2.1
downloads list
http://forum.xda-developers.com/showthread.php?t=1850506
tekrhino said:
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
Click to expand...
Click to collapse
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Prophotog said:
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Click to expand...
Click to collapse
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Thanks to everyone!! Looks to be a long night. :>)
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
I lol'ed at your post. A little dramatic, don't you think? He's not even close to bricked. Just Odin from download mode back to stock, and redo the steps with bootloader unlock.
Here is a gift (working ez-unlock v1.2)
http://dl.dropbox.com/u/42057363/com.mmmeff.ez.unlock_3.apk
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Prophotog said:
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Click to expand...
Click to collapse
No need to do the boot chains. Just follow section 5 of this guide and I recommend root 66 for the ROM you flash
http://forum.xda-developers.com/showthread.php?p=28530394
Sent from my SGS3 running Eclipse 2.1
tekrhino said:
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Click to expand...
Click to collapse
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Prophotog said:
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Click to expand...
Click to collapse
And just for future reference, it's Dalvik, not Kelvic
Sent from my SCH-I535 using xda app-developers app
Prophotog said:
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Click to expand...
Click to collapse
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
kintwofan said:
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
Click to expand...
Click to collapse
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Prophotog said:
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Click to expand...
Click to collapse
Cool, I take it you're up and running again. Just make sure you use ez unlock 1.2 next time. And the positive is you're an Odin pro now!
Sent from my SGS3 running Eclipse 2.1
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Alex0826 said:
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Click to expand...
Click to collapse
Sprint kernel is causing the inversion. Flash a vzw kernel. Read first flash later.
Sent from my SCH-I535 using xda app-developers app
Who ever did your flash might not done it right cause ya not supposed to lose a flash like that unless he didn't do things right. I can factory reset mine and I wont loose flash
Sent from my SPH-L900 using Tapatalk 2