my htc sensation z710e always automatically shuts down and sometime it also reboot. someone can help me to fix it. i have been using all versions of AHD revolution rom and insert coin. his problem always happens.
thanks.....
ngocanhfam said:
my htc sensation z710e always automatically shuts down and sometime it also reboot. someone can help me to fix it. i have been using all versions of AHD revolution rom and insert coin. his problem always happens.
thanks.....
Click to expand...
Click to collapse
More info. Firmware? Kernel?
I rmember having those issues
I had the similar issues but since i moved to Pyromod's ROM my phone is working like a charm. It only FC at the beginning and once that is it. Rest of the time it runs perfect. My current version is PyroMOD 1.1 and FW is 3.12. So far it is one of the most stable release i have seen.
tropical cactus said:
More info. Firmware? Kernel?
Click to expand...
Click to collapse
kernel version: 3.0.16-v1.3.1
firmware 3.32.401.5
baseband version: 11.65.3504.00u_11.19.3504.29_2
thanks bro. help me!!!!
this problem often happens when it has call
ngocanhfam said:
kernel version: 3.0.16-v1.3.1
firmware 3.32.401.5
baseband version: 11.65.3504.00u_11.19.3504.29_2
thanks bro. help me!!!!
this problem often happens when it has call
Click to expand...
Click to collapse
Do you use an overclocked cpu? If so, at which frequency (1,5 GHz, 1,8GHz)?
Try to clean you sim card.
The phone may reboot if it looses connection with the sim card, and can happen because of dust and dirt.
Be gentle with it, and if you have placed you fingers on the connectors (the gold) then try to clean it with some rubbing alcohol
Possible that a firmware update went slightly awry. Have you tried reflashing your firmware? Or perhaps you could use another radio? (see Development forum) - I had a similar problem with my phone shutting down randomly, and a reflash of firmware and radio seemed to do the job.
talitainment said:
Do you use an overclocked cpu? If so, at which frequency (1,5 GHz, 1,8GHz)?
Click to expand...
Click to collapse
yes. overclocked cpu to 1.5 ghz.
so, it is a reason?????
ngocanhfam said:
yes. overclocked cpu to 1.5 ghz.
so, it is a reason?????
Click to expand...
Click to collapse
1,5 ghz are no problem. that's the default rate the sensation hardware can deliver (for normal sensation htc set down the clock rate to 1,2).
Maybe chrwadum's or Pash.'s answer can solve this issue.
Personally I would reinstall firmware and ROM.
Related
Why when I flash a faux kernel no matter what version it is the Gigahertz always stay the same but when.I flash a bricked kernel no matter what version it goes up to 1.566 times 2.why doesn't the faux kernels ever raise the phones Gigahertz.I only had the Gigahertz go down 1 time with a faux kernel and that when I used the no frills,no thrills overclocking app.and I clocked it to 1.566 and it was killing my battery so I flashed faux kernel v005 and it took it down to 1.5.I couldn't declock it with the app became I found out that the app sucks and it stayed stuck at 1.566 which is 1.6.If anyone has ever experienced a similiar problem or know why these different problems occurred would you please let me know.and I have searched the internet before posting this. Thanks in advance.
Sent from my HTC Sensation 4G
Im absolutely not an expert so sry if my question seems a little stupid but are you flashing a working kernel for your phone??
Whats the name of the rom your running and whats your firmware?
Im running SmartDroids Beserk Rom with Brickeds Kernel and my Sensation XE is running like crazy... with normal batterylife...
clocked it for 584 mhz (min) and 1866 (Max) as std
Hope you´ll get you phone running soon...
Regards
/Lossi
i get random restarts but that dont bother me its the random power offs that get me mad when i pull phone out and its off
i have changed a few roms and firmwear and still seem to get it not oc so why why why
1.17 for Gingerbread.
3.32 or 3.33 for ICS.
If you've got that right, then it shouldn't be a firmware issue.
right now i am on 332 t-Mobile and pk 101 for rom and new radio but have tried different roms and mismatched firm and radios
craven667 said:
right now i am on 332 t-Mobile and pk 101 for rom and new radio but have tried different roms and mismatched firm and radios
Click to expand...
Click to collapse
What kernel? Are you undervolted? Any Additional mods installed? any logcats/kernel logs of the reboot?
Jonny said:
What kernel? Are you undervolted? Any Additional mods installed? any logcats/kernel logs of the reboot?
Click to expand...
Click to collapse
not sure how to logcats
and didnt know there was kernel logs
i am on 3.33 uni JUST REFLASHED AS OF 9:50 7/16/12
on pk 5.1.0 and tried there new one not stable for me yet
kernel is faux123 v004 i like this one cuz i crash over 18XX MHz and hard not to keep trying
craven667 said:
not sure how to logcats
and didnt know there was kernel logs
i am on 3.33 uni JUST REFLASHED AS OF 9:50 7/16/12
on pk 5.1.0 and tried there new one not stable for me yet
kernel is faux123 v004 i like this one cuz i crash over 18XX MHz and hard not to keep trying
Click to expand...
Click to collapse
Clock it down then - try 15xx for starters as not all CPUs can manage the higher clock speeds and this could be your cause of reboots.
no mine handles well up to 1800+ i get power offs on all speeds
i just flashed 3.33 and havnt seen a power off yet maybe i got a bad flash
Bump
Sent from my HTC Sensation 4G using xda app-developers app
my viper Rom keeps keeps rebooting itself at times AMD then there's a huge battery drain , especially when I'm on on demand governor ..
I even tried changing my kernel to SebastianFM but still the same problem, even with the mod for Sebastian fm..
can someone help me figure out the might be causing this? plus my battery's less awesome then 1.1 ,
so can someone help me figure out the problem?
and if any other person could help me with which kernel works best for you guys with viper 1.2.1 ?
I'd really appreciate help, thank you
Hi there, this is best posted on the viper development site. Everyone there is using the same Rom and perhaps more people even have your issue and know of a fix for it. So it is really best to post this on viper development where you can get Rom specific help. I use viper also and have not experienced you're issue. Have you considered doing a fresh download and full wipe and reinstallation of the Rom? This might help. But do post on viper site and hopefully someone knows of a fix if above doesn't solve the issue. Best wishes.
Sent from my HTC Sensation 4G using xda premium
Rhishabm said:
my viper Rom keeps keeps rebooting itself at times AMD then there's a huge battery drain , especially when I'm on on demand governor ..
I even tried changing my kernel to SebastianFM but still the same problem, even with the mod for Sebastian fm..
can someone help me figure out the might be causing this? plus my battery's less awesome then 1.1 ,
so can someone help me figure out the problem?
and if any other person could help me with which kernel works best for you guys with viper 1.2.1 ?
I'd really appreciate help, thank you
Click to expand...
Click to collapse
I use Faux's kernel with intelidemand governor and it's perfect (performance and battery)
I don't know aboot reboots... wait for other answers.
The kernel I use is yank version 2.5. I just downloaded it caused many viper users use it and like it. I thought I'd give it a try. So far so good.
Sent from my HTC Sensation 4G using xda premium
Yank 2.52 works well for me. I had constant reboots when I was undervolted by 100, but now that I'm not undervolted at all it doesn't reboot anymore. So it may not necessarily be kernel but kernel settings that can give you bootloop.
Sent from my HTC Sensation 4G using xda app-developers app
What firmwire are you using 3.32 or is it 3.33 and also are you s off and Fyi sebastien's kernel there's two mods you need in order to get the correct settings if not thats all you will get is battery drain i've been using it for a week now and its awsome
Sent From My Viper S 1.2.1with true s off by alpha revolutionary
Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
You likely have a application that's preventing your device from sleeping. Check permissions on your applications and you will find the culprit. Best wishes.also when installing apps look at what the developers say in certain apps it will clearly state PREVENT Device from sleeping. Hope this helps.
Sent from my HTC Sensation 4G using xda premium
pawel30w said:
Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
Click to expand...
Click to collapse
You can use "Battery use" to see which app is using your battery. Try killing the apps that are running, until you find which is causing it.
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
pawel30w said:
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
Click to expand...
Click to collapse
I don't think OC can cause this problem but then I think 1832Mhz is way too high and may cause instability to your phone, try to tune it down. In fact there won't be a significant performance improvement even if you OC it so high. Not worth frying your phone's CPU for that insignificant gain.
It's a application like I said that's preventing your device from sleeping! Find that app and your issue will be resolved.
Sent from my HTC Sensation 4G using xda premium
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
pawel30w said:
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
Click to expand...
Click to collapse
If only you had mentioned you had installed that in the OP...
Or better still, read the last 2-3 pages of my thread, its all there.
I think its my modded messages.apk and I posted a stock unmodded one (actually when I say stock, that is a lie because it is the apk from my ROM and as such has gone through 3-4 apk optimization scripts) in the last 1-2 pages in the thread which seems to have fixed this
Now Id be posting in teh Vengeance kernel thread, but that requires me to have 10 posts. I don't. Now, after flashing Shivang Dave's Vengeance Reloaded my baseband became like this "7x25A_M:ERROR_A:ERROR". Will that cause any problems? Other than that the phone works very well overclocked to 1.3 GHz.
So my next question is about Pure Performances X and Pure Audio 2. One of them causes my phone to turn off at 10% battery, and as a whole show the wrong percentages. Anyone knows such a problem?
Turbolqk said:
Now Id be posting in teh Vengeance kernel thread, but that requires me to have 10 posts. I don't. Now, after flashing Shivang Dave's Vengeance Reloaded my baseband became like this "7x25A_M:ERROR_A:ERROR". Will that cause any problems? Other than that the phone works very well overclocked to 1.3 GHz.
So my next question is about Pure Performances X and Pure Audio 2. One of them causes my phone to turn off at 10% battery, and as a whole show the wrong percentages. Anyone knows such a problem?
Click to expand...
Click to collapse
First try reflashing your baseband. if it s working properly there might not be anything wron with it . but just reflash it to be safe
I have used pure audio so i m not sure but i ve been using pure performance and my phone is working perfectly. did u turn on any power savers
flash baseband and that will go away... it will mot create any issues...
i think baseband 7x25A_M:ERROR_A:ERROR is not a problem, but the problem is in my miro, i got FC when open contact and then when i open it again all my contact is gone,
Governors : OndemandX
IO Shedulers : sio
Frequencies: 245 Mhz - 1.008 Ghz
is anyone have same problem
I used Flashtool, excluded anything but baseband and flashed, yet the issue did not go away! :/
As for the pure performance, ill flash them one by one to see in which one the problem is.
Reisen23 said:
i think baseband 7x25A_M:ERROR_A:ERROR is not a problem, but the problem is in my miro, i got FC when open contact and then when i open it again all my contact is gone,
Governors : OndemandX
IO Shedulers : sio
Frequencies: 245 Mhz - 1.008 Ghz
is anyone have same problem
Click to expand...
Click to collapse
Turbolqk said:
I used Flashtool, excluded anything but baseband and flashed, yet the issue did not go away! :/
As for the pure performance, ill flash them one by one to see in which one the problem is.
Click to expand...
Click to collapse
FC isn't related to baseband.. and flashing baseband should make that go away
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
sorry, what i mean is there something wrong with my setting, that make make my contact FC and sometime my miro is little lag
it happen when i use Vengeace kernel more than 1 month. before that, there nothing problem like this
Reisen23 said:
sorry, what i mean is there something wrong with my setting, that make make my contact FC and sometime my miro is little lag
it happen when i use Vengeace kernel more than 1 month. before that, there nothing problem like this
Click to expand...
Click to collapse
Try clearing your cache.. if doesn't work, try reflashing firmware...
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
ShivangDave said:
Try clearing your cache.. if doesn't work, try reflashing firmware...
Click to expand...
Click to collapse
ok i'll try
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
When I flash your kernel I see change in the signal strength. While It's full at the moment, with the Error baseband the signal gets twice as weak.
So I start up flashtool, connect the phone, choose the firmware for the phone and choose to flash only the baseband. The problem still persists,
however. I mean, are there any other files I should copy before flashing the new kernel and pasting them in the phone later?