Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
You likely have a application that's preventing your device from sleeping. Check permissions on your applications and you will find the culprit. Best wishes.also when installing apps look at what the developers say in certain apps it will clearly state PREVENT Device from sleeping. Hope this helps.
Sent from my HTC Sensation 4G using xda premium
pawel30w said:
Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
Click to expand...
Click to collapse
You can use "Battery use" to see which app is using your battery. Try killing the apps that are running, until you find which is causing it.
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
pawel30w said:
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
Click to expand...
Click to collapse
I don't think OC can cause this problem but then I think 1832Mhz is way too high and may cause instability to your phone, try to tune it down. In fact there won't be a significant performance improvement even if you OC it so high. Not worth frying your phone's CPU for that insignificant gain.
It's a application like I said that's preventing your device from sleeping! Find that app and your issue will be resolved.
Sent from my HTC Sensation 4G using xda premium
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
pawel30w said:
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
Click to expand...
Click to collapse
If only you had mentioned you had installed that in the OP...
Or better still, read the last 2-3 pages of my thread, its all there.
I think its my modded messages.apk and I posted a stock unmodded one (actually when I say stock, that is a lie because it is the apk from my ROM and as such has gone through 3-4 apk optimization scripts) in the last 1-2 pages in the thread which seems to have fixed this
Related
I came from the Hercules and I'm currently running Dewizzled 2.5 with Da_G's .42 kernel. If I use system tuner, it has no affect on the cpu... CPU tuner made my phone go into bootloop, and SetCPU makes it restart as soon as I go past 1.62ghz. With my hercules I had no problem running it at 1.89ghz
Hrm thats bizarre on cpu tuner and setcpu... have you tried the .42 with another rom? Also, if your able to use Da_g .42 without any SoD's (sleep of death) then you should really use Da_g .43 as it fixes an init script problem, which is likely why you werent seeing changes with system tuner. Seems alot of people have SoD's with various stock roms on Da_g's post .3 versions... so if you flash another rom and then start having them either flash .3 or change back to your working rom.
.43 Can be found here: http://forum.xda-developers.com/showpost.php?p=20090801&postcount=462
System tuner and setcpu also seem to force the second core online all the time, so its been highly recommended that you use a script to set the o'clock and such. Instructions are here, or if your not too saavy can use twopumpchump's pre-made version which is CWM flashable. (here)
It seems every cpu app I've tried revert the kernel back to it's stock settings. Faux's kernel is 384-1720 (I think) by default. I wish it was 192 as default. Every time I open up system tuner pro, setcpu, fauxclock, rom toolbox pro.....they don't stick. If anyone has a way of making it stick I know I'd appreciate it. Even if I choose set on boot it doesn't.
sulpher said:
Hrm thats bizarre on cpu tuner and setcpu... have you tried the .42 with another rom? Also, if your able to use Da_g .42 without any SoD's (sleep of death) then you should really use Da_g .43 as it fixes an init script problem, which is likely why you werent seeing changes with system tuner. Seems alot of people have SoD's with various stock roms on Da_g's post .3 versions... so if you flash another rom and then start having them either flash .3 or change back to your working rom.
.43 Can be found here: http://forum.xda-developers.com/showpost.php?p=20090801&postcount=462
System tuner and setcpu also seem to force the second core online all the time, so its been highly recommended that you use a script to set the o'clock and such. Instructions are here, or if your not too saavy can use twopumpchump's pre-made version which is CWM flashable. (here)
Click to expand...
Click to collapse
Thanks I'll flash that and see if it works I have a feeling that it's the mixture of Dewizzled and Da_G lol and I love TDJ's Darkside kernel but right now it's only available for the Hercules so it'll cause the screen orientation issue. Hopefully he'll make a port for the Skyrocket
I had the same problem but on coke rom with faux.. So I flashed the giedion script.. And now it seem to hold and go now deep sleep, and check it out in the faux kernel section in the development section.
Sent from my Xoom using xda premium
I flashed faux's kernel and used system tuner but it still wouldn't stick until I rebooted... I have minimum set to 192mhz and screen off at 192 as well but in CPU Spy I only see 1728, 540 and Deep Sleep
How many overclock apps do you have on you phone at one time? And yes after you've made CPU adjustments click set on boot and reboot
Sent from my SAMSUNG-SGH-I727 using xda premium
cdshepherd said:
How many overclock apps do you have on you phone at one time? And yes after you've made CPU adjustments click set on boot and reboot
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
1 at I time. I uninstall if it doesn't work before installing the next. i've had my phone with screen off for a while now and it seems that 75% it's staying at 540mhz, barely at deep sleep and rest at 1728mhz
I actually underclock my processor. To about 1ghz . As for your deep sleep issue I can't actually say cause I've never had the issue but look around the skyrocket threads. There's a lot of info on it.
Sent from my SAMSUNG-SGH-I727 using xda premium
i like nofrills
I use android overclock works fine on Da_G's kernel
Use faux clock for a faux version kernel. With any other kernel I have had great results with set CPU.
Sent from my SAMSUNG-SGH-I727 using XDA App
I'm on Venom Ss and using the default kernel for the ROM, but after setting the maximum at 1.026mhz and minimum at 702mhz, the settings don't stick, changing to 384mhz maximum and minimum constantly. How do I make the settings stick? I have done a full wipe. Thanks in advance!
Cavalry88 said:
I'm on Venom Ss and using the default kernel for the ROM, but after setting the maximum at 1.026mhz and minimum at 702mhz, the settings don't stick, changing to 384mhz maximum and minimum constantly. How do I make the settings stick? I have done a full wipe. Thanks in advance!
Click to expand...
Click to collapse
use the SetCPU app from google play. good luck! :fingers-crossed:
chassy_8o9 said:
use the SetCPU app from google play. good luck! :fingers-crossed:
Click to expand...
Click to collapse
Yup I'm using SetCPU already, but it still doesn't seem to stick occassionally. Is there something that I haven't done?
Cavalry88 said:
Yup I'm using SetCPU already, but it still doesn't seem to stick occassionally. Is there something that I haven't done?
Click to expand...
Click to collapse
try the bricked kernel... with that kernel stays as your needs.... well, that's my case
:fingers-crossed: good luck!
Sense 4 roms sometimes does that bug, it happened to me with ordroid after I installed it with a full wipe it became normal something makes your CPU rise and if you don't know what it is your only chance is full wipe
phylosoph said:
Sense 4 roms sometimes does that bug, it happened to me with ordroid after I installed it with a full wipe it became normal something makes your CPU rise and if you don't know what it is your only chance is full wipe
Click to expand...
Click to collapse
I already did a full wipe before flashing though..
Sent from my HTC Sensation Z710e using xda app-developers app
Try with system tuner maybe? There are various option how to set the frequencies (via script or normally)
So far the settings on system tuner aren't sticking either. How do I use scripts? Thanks a lot!
Sent from my HTC Sensation Z710e using xda app-developers app
i am on viperss 1.0.0 too and i am using the Bricked kernel 1.35
with maxkhz to 1728000 . after i install the bricked kernel all run well
but 1 hour later is gone back to the default setting (1566mhz) .
then i installt system tuner and let him on 1400mhz , 1 your later the setting is again on default by 1566 ???
i dont understand this because by a earlier version all was well..
i hope you can help me
Dear All,
I have just installed Andromadus mimicry 1.5 on my HTC desire Z.
In the performance section, the phone is configured by default to have minimum 386Mhz and max 1209Mhz.
When I try to change these settings to min 245 Mhz and max 1516, the phone accepts the settings for a few minutes, and then revert back to the default. I know these settings work correctly on my phone, since I've moved from CM7 before, and has no problem.
I have tried rebooting, reflashing the ROM, and the issue remains.
Has anyone else encountered this issue? Any solutions?
Thx.
You have changed Rom only or with karnel also?
it is possible that new karnel doesn't support that range..
You should try to check your governors
we all should be polite enough to press thanks for anyone who helped US.
shivam1688 said:
You have changed Rom only or with karnel also?
it is possible that new karnel doesn't support that range..
You should try to check your governors
we all should be polite enough to press thanks for anyone who helped US.
Click to expand...
Click to collapse
Thanks for your prompt feedback Shivam.
Well, I changed the ROM and installed the kernel that was supplied with it.
The governor setting doesn't stick either, and it reverts back to SmartassV2 as well after some time.
Hello everyone!,
I have facing alot issues on AOSP based roms(such as CM10.1/2 etc).Alot slow downs,lags,Instability,freezes,glitch etc.Why is it caused ? or it just a Rom problem ?
PS: My previous device Galaxy gio runs CM10/.1 flawlessly.
EvilKing009 said:
Hello everyone!,
I have facing alot issues on AOSP based roms(such as CM10.1/2 etc).Alot slow downs,lags,Instability,freezes,glitch etc.Why is it caused ? or it just a Rom problem ?
PS: My previous device Galaxy gio runs CM10/.1 flawlessly.
Click to expand...
Click to collapse
I need some more information about this. Did you change CPU settings? Have you made a full wipe before flashing? because for me it works great.
Here's some information.
CPU : 1728MHZ with badass governor
Min.CPU : 382mhz
Tweaks : None!
Always Wipe before installation of Roms.
EvilKing009 said:
Here's some information.
CPU : 1728MHZ with badass governor
Min.CPU : 382mhz
Tweaks : None!
Always Wipe before installation of Roms.
Click to expand...
Click to collapse
Usually 1728Mhz works, but it could cause instability. Try lowering it to 1566Mhz and see what happens. you can also try another governor.
Did you also change the voltage?
astar26 said:
Usually 1728Mhz works, but it could cause instability. Try lowering it to 1566Mhz and see what happens. you can also try another governor.
Did you also change the voltage?
Click to expand...
Click to collapse
^1. I am not sure but I think read CM 10.1/2 come undervolted (as they're light roms) and 1782 might be unstable (it has worked for me).
Far_SighT said:
^1. I am not sure but I think read CM 10.1/2 come undervolted (as they're light roms) and 1782 might be unstable (it has worked for me).
Click to expand...
Click to collapse
Exactly what I said. Let's wait for OP to post his result.
1728mhz frequeny works flawlessly on ViperS 3.1.2/1.6.3 without any instability issues.I think the problem is that that i wipe before installation,therefore i need to install the rom first and then do a wipe,Am i right?
EvilKing009 said:
1728mhz frequeny works flawlessly on ViperS 3.1.2/1.6.3 without any instability issues.I think the problem is that that i wipe before installation,therefore i need to install the rom first and then do a wipe,Am i right?
Click to expand...
Click to collapse
Nope, you should wipe before.
CPU frequency could work on one kernel and not on the other. For example, my siter's former phone, LG Optimus One could overclock to 728Mhz with most kernels. Then came a kernel that could overclock further and be stable at around 800Mhz. Each kernel has a different max frequency, although it's listed, it might not be stable. As Far_Sight said, the kernel might be undervolted, that might mean that overvolting it may allow for the frequency, but I don't suggest it. Performance is great even on 1188Mhz (I put it that way for myself to save battery).
Hi all! When i use jaggy rom i set 320MHz and i have 0 lags. when i use CM 10.1 and i write anything i have extremely lags (on 600 MHz). I have aries kernel v1 (v2 not working). And battery use is very high. With wich kernel and rom i will nave no lags and i will can set 828 MHz?
Ps: i like CM is very nice
michal16 said:
Hi all! When i use jaggy rom i set 320MHz and i have 0 lags. when i use CM 10.1 and i write anything i have extremely lags (on 600 MHz). I have aries kernel v1 (v2 not working). And battery use is very high. With wich kernel and rom i will nave no lags and i will can set 828 MHz?
Ps: i like CM is very nice
Click to expand...
Click to collapse
Maybe CM10 or CM9 with pandora or jarvis kernel but i tried them a lot of times and cant boot. Battery use will always be high i think, cause its CM10.1 and it is oc-ed.
P.S i think maybe ill try some sense (3.5 maybe) cause it boots very fast, no lags and better battery life.
for example
http://forum.xda-developers.com/showthread.php?t=2344110 i find this. this will be good?
Help me with rom and kernel i have to use?
help?
:crying:
michal16 said:
help?
:crying:
Click to expand...
Click to collapse
Use any other rom
hit thanks if it helped
send from my HTC explorer from earth
very funny
Under clocking CM 10.1 will reduce performance. Its android 4.2, need more memory and cpu
@michal16
so u want OC? try OCed kernel,but remember to carefully follow cute_prince pll2 method
and about lag,it depends not only on cpu,but also sd-card u use,(class 4,6,10)...
remember to calibrate your battery after installing new rom