Now Id be posting in teh Vengeance kernel thread, but that requires me to have 10 posts. I don't. Now, after flashing Shivang Dave's Vengeance Reloaded my baseband became like this "7x25A_M:ERROR_A:ERROR". Will that cause any problems? Other than that the phone works very well overclocked to 1.3 GHz.
So my next question is about Pure Performances X and Pure Audio 2. One of them causes my phone to turn off at 10% battery, and as a whole show the wrong percentages. Anyone knows such a problem?
Turbolqk said:
Now Id be posting in teh Vengeance kernel thread, but that requires me to have 10 posts. I don't. Now, after flashing Shivang Dave's Vengeance Reloaded my baseband became like this "7x25A_M:ERROR_A:ERROR". Will that cause any problems? Other than that the phone works very well overclocked to 1.3 GHz.
So my next question is about Pure Performances X and Pure Audio 2. One of them causes my phone to turn off at 10% battery, and as a whole show the wrong percentages. Anyone knows such a problem?
Click to expand...
Click to collapse
First try reflashing your baseband. if it s working properly there might not be anything wron with it . but just reflash it to be safe
I have used pure audio so i m not sure but i ve been using pure performance and my phone is working perfectly. did u turn on any power savers
flash baseband and that will go away... it will mot create any issues...
i think baseband 7x25A_M:ERROR_A:ERROR is not a problem, but the problem is in my miro, i got FC when open contact and then when i open it again all my contact is gone,
Governors : OndemandX
IO Shedulers : sio
Frequencies: 245 Mhz - 1.008 Ghz
is anyone have same problem
I used Flashtool, excluded anything but baseband and flashed, yet the issue did not go away! :/
As for the pure performance, ill flash them one by one to see in which one the problem is.
Reisen23 said:
i think baseband 7x25A_M:ERROR_A:ERROR is not a problem, but the problem is in my miro, i got FC when open contact and then when i open it again all my contact is gone,
Governors : OndemandX
IO Shedulers : sio
Frequencies: 245 Mhz - 1.008 Ghz
is anyone have same problem
Click to expand...
Click to collapse
Turbolqk said:
I used Flashtool, excluded anything but baseband and flashed, yet the issue did not go away! :/
As for the pure performance, ill flash them one by one to see in which one the problem is.
Click to expand...
Click to collapse
FC isn't related to baseband.. and flashing baseband should make that go away
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
sorry, what i mean is there something wrong with my setting, that make make my contact FC and sometime my miro is little lag
it happen when i use Vengeace kernel more than 1 month. before that, there nothing problem like this
Reisen23 said:
sorry, what i mean is there something wrong with my setting, that make make my contact FC and sometime my miro is little lag
it happen when i use Vengeace kernel more than 1 month. before that, there nothing problem like this
Click to expand...
Click to collapse
Try clearing your cache.. if doesn't work, try reflashing firmware...
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
ShivangDave said:
Try clearing your cache.. if doesn't work, try reflashing firmware...
Click to expand...
Click to collapse
ok i'll try
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
When I flash your kernel I see change in the signal strength. While It's full at the moment, with the Error baseband the signal gets twice as weak.
So I start up flashtool, connect the phone, choose the firmware for the phone and choose to flash only the baseband. The problem still persists,
however. I mean, are there any other files I should copy before flashing the new kernel and pasting them in the phone later?
Related
my htc sensation z710e always automatically shuts down and sometime it also reboot. someone can help me to fix it. i have been using all versions of AHD revolution rom and insert coin. his problem always happens.
thanks.....
ngocanhfam said:
my htc sensation z710e always automatically shuts down and sometime it also reboot. someone can help me to fix it. i have been using all versions of AHD revolution rom and insert coin. his problem always happens.
thanks.....
Click to expand...
Click to collapse
More info. Firmware? Kernel?
I rmember having those issues
I had the similar issues but since i moved to Pyromod's ROM my phone is working like a charm. It only FC at the beginning and once that is it. Rest of the time it runs perfect. My current version is PyroMOD 1.1 and FW is 3.12. So far it is one of the most stable release i have seen.
tropical cactus said:
More info. Firmware? Kernel?
Click to expand...
Click to collapse
kernel version: 3.0.16-v1.3.1
firmware 3.32.401.5
baseband version: 11.65.3504.00u_11.19.3504.29_2
thanks bro. help me!!!!
this problem often happens when it has call
ngocanhfam said:
kernel version: 3.0.16-v1.3.1
firmware 3.32.401.5
baseband version: 11.65.3504.00u_11.19.3504.29_2
thanks bro. help me!!!!
this problem often happens when it has call
Click to expand...
Click to collapse
Do you use an overclocked cpu? If so, at which frequency (1,5 GHz, 1,8GHz)?
Try to clean you sim card.
The phone may reboot if it looses connection with the sim card, and can happen because of dust and dirt.
Be gentle with it, and if you have placed you fingers on the connectors (the gold) then try to clean it with some rubbing alcohol
Possible that a firmware update went slightly awry. Have you tried reflashing your firmware? Or perhaps you could use another radio? (see Development forum) - I had a similar problem with my phone shutting down randomly, and a reflash of firmware and radio seemed to do the job.
talitainment said:
Do you use an overclocked cpu? If so, at which frequency (1,5 GHz, 1,8GHz)?
Click to expand...
Click to collapse
yes. overclocked cpu to 1.5 ghz.
so, it is a reason?????
ngocanhfam said:
yes. overclocked cpu to 1.5 ghz.
so, it is a reason?????
Click to expand...
Click to collapse
1,5 ghz are no problem. that's the default rate the sensation hardware can deliver (for normal sensation htc set down the clock rate to 1,2).
Maybe chrwadum's or Pash.'s answer can solve this issue.
Personally I would reinstall firmware and ROM.
i get random restarts but that dont bother me its the random power offs that get me mad when i pull phone out and its off
i have changed a few roms and firmwear and still seem to get it not oc so why why why
1.17 for Gingerbread.
3.32 or 3.33 for ICS.
If you've got that right, then it shouldn't be a firmware issue.
right now i am on 332 t-Mobile and pk 101 for rom and new radio but have tried different roms and mismatched firm and radios
craven667 said:
right now i am on 332 t-Mobile and pk 101 for rom and new radio but have tried different roms and mismatched firm and radios
Click to expand...
Click to collapse
What kernel? Are you undervolted? Any Additional mods installed? any logcats/kernel logs of the reboot?
Jonny said:
What kernel? Are you undervolted? Any Additional mods installed? any logcats/kernel logs of the reboot?
Click to expand...
Click to collapse
not sure how to logcats
and didnt know there was kernel logs
i am on 3.33 uni JUST REFLASHED AS OF 9:50 7/16/12
on pk 5.1.0 and tried there new one not stable for me yet
kernel is faux123 v004 i like this one cuz i crash over 18XX MHz and hard not to keep trying
craven667 said:
not sure how to logcats
and didnt know there was kernel logs
i am on 3.33 uni JUST REFLASHED AS OF 9:50 7/16/12
on pk 5.1.0 and tried there new one not stable for me yet
kernel is faux123 v004 i like this one cuz i crash over 18XX MHz and hard not to keep trying
Click to expand...
Click to collapse
Clock it down then - try 15xx for starters as not all CPUs can manage the higher clock speeds and this could be your cause of reboots.
no mine handles well up to 1800+ i get power offs on all speeds
i just flashed 3.33 and havnt seen a power off yet maybe i got a bad flash
Bump
Sent from my HTC Sensation 4G using xda app-developers app
Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
You likely have a application that's preventing your device from sleeping. Check permissions on your applications and you will find the culprit. Best wishes.also when installing apps look at what the developers say in certain apps it will clearly state PREVENT Device from sleeping. Hope this helps.
Sent from my HTC Sensation 4G using xda premium
pawel30w said:
Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
Click to expand...
Click to collapse
You can use "Battery use" to see which app is using your battery. Try killing the apps that are running, until you find which is causing it.
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
pawel30w said:
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
Click to expand...
Click to collapse
I don't think OC can cause this problem but then I think 1832Mhz is way too high and may cause instability to your phone, try to tune it down. In fact there won't be a significant performance improvement even if you OC it so high. Not worth frying your phone's CPU for that insignificant gain.
It's a application like I said that's preventing your device from sleeping! Find that app and your issue will be resolved.
Sent from my HTC Sensation 4G using xda premium
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
pawel30w said:
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
Click to expand...
Click to collapse
If only you had mentioned you had installed that in the OP...
Or better still, read the last 2-3 pages of my thread, its all there.
I think its my modded messages.apk and I posted a stock unmodded one (actually when I say stock, that is a lie because it is the apk from my ROM and as such has gone through 3-4 apk optimization scripts) in the last 1-2 pages in the thread which seems to have fixed this
I have search in this forum and googling it about my problem [ not big problem actually ], but not yet found proper thread or answer.
After flashing ROM version V5.2 and try to boot from recovery, i got my button key now blinking while booting.
But after booting complete is normal.
Currently use V5.2 with baseband 18A, and it works normal in my O3D device.
Button is also working normal, except search and back button is mixed function.
Do you guys ever has similar blinking led? is it absolutelly normal,
or just i have not yet found some issues in my device...
thank you for any feedback ( if there is any link for fixing search/back button improvement, it'll be better )..
mine is blinking too while booting, think it is normal.
if you want normal buttons, you should install a kernel with 4 button support. then back and search isn't switched.
blinking = normal
4 keys fix: flash this Kernel but read the Instructions carefully!!
ps you dont have to use exactly that kernel but its the one i use/like
Sent from my LG-SU760 using xda premium
thanks to both of you guys...
if blinking is normal then i'll not mind about it..
and for link about kernel, i'll go and start to read it..
thanks for link..
TMProduct1onZ said:
blinking = normal
4 keys fix: flash this Kernel but read the Instructions carefully!!
ps you dont have to use exactly that kernel but its the one i use/like
Sent from my LG-SU760 using xda premium
Click to expand...
Click to collapse
Sorry to bump up on little bit dumb question i am about to ask but, Whats the Kernel do to your phone? what is it? why i need it?
maybe need for unlock (flash) the bootloader...
bensmokie said:
Sorry to bump up on little bit dumb question i am about to ask but, Whats the Kernel do to your phone? what is it? why i need it?
Click to expand...
Click to collapse
“… the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level.”
Read more about it Here
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
“… the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level.”
Read more about it Here
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Thanks a lot mate.as i as i understood i can flash only the kernel right? or it does have to be with the ICS. i mean like the ICS V5 of Xbsall has kernel 3.0.1 on it, isn't it? but i think it doesn't the over clock ....
bensmokie said:
Thanks a lot mate.as i as i understood i can flash only the kernel right? or it does have to be with the ICS. i mean like the ICS V5 of Xbsall has kernel 3.0.1 on it, isn't it? but i think it doesn't the over clock ....
Click to expand...
Click to collapse
You are already on ICS, so you can flash only the kernel.
schubeir
schubeir said:
You are already on ICS, so you can flash only the kernel.
schubeir
Click to expand...
Click to collapse
Thanks , Can you please advise me for a great kernel....
bensmokie said:
Thanks , Can you please advise me for a great kernel....
Click to expand...
Click to collapse
My favorite: Kernel
or this one: Kernel
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
My favorite: Kernel
or this one: Kernel
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
It says here that i have to flash wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/show....php?t=1971014
Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/show....php?t=1978543
as far as understand we already those done steps in order to get rooted , because without them my Ics will not rooted correct me if i am wrong but in order to get your device rooted you have to flash them both ain't that right? i mean you have flash Dexter_nlb's Recovery and wkparks Modified Bootloaders to root your ics right?
bensmokie said:
It says here that i have to flash wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/show....php?t=1971014
Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/show....php?t=1978543
as far as understand we already those done steps in order to get rooted , because without them my Ics will not rooted correct me if i am wrong but in order to get your device rooted you have to flash them both ain't that right? i mean you have flash Dexter_nlb's Recovery and wkparks Modified Bootloaders to root your ics right?
Click to expand...
Click to collapse
i didnt flash dexters recovery to root my phone :/
however, if you flashed dexters recovery then you have everything you need and you can flash a custom kernel
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
i didnt flash dexters recovery to root my phone :/
however, if you flashed dexters recovery then you have everything you need and you can flash a custom kernel
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Well i flashed it but nothing change my Kernel still the same 3.0.21 as it was.maybe i didn't wipe cashe or something.
I flashed Dexters recovery in order to get TWRP work on my phone.
bensmokie said:
Well i flashed it but nothing change my Kernel still the same 3.0.21 as it was.maybe i didn't wipe cashe or something.
I flashed Dexters recovery in order to get TWRP work on my phone.
Click to expand...
Click to collapse
If the flash process had no errors then you successfully flashed a custom kernel all custom kernels for ics are 3.0.21 but with some tweaks and mods
Sometimes devs change kernel version to say something else, but not always...
Download No-Frills CPU to see what your min/max frequencies are
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
If the flash process had no errors then you successfully flashed a custom kernel all custom kernels for ics are 3.0.21 but with some tweaks and mods
Sometimes devs change kernel version to say something else, but not always...
Download No-Frills CPU to see what your min/max frequencies are
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Here is mine,
mine gives me possibility to 1.3GHz on Max and Min clock Freq, will it harm my device if i move to 1.3GHz all of it? because i changed it to 1.3 GHz to both of them at Max and min...
bensmokie said:
Here is mine,
mine gives me possibility to 1.3GHz on Max and Min clock Freq, will it harm my device if i move to 1.3GHz all of it? because i changed it to 1.3 GHz to both of them at Max and min...
Click to expand...
Click to collapse
i guess you flashed iodaks kernel..
No it wont really harm your phone but it will drain more battery.
And its not really smart to keep the min @1,3ghz.. make it min 300mhz and max 1,3ghz iodak made his kernel so, that it raise to max freq. every time you touch the display, so theres no need to make min freq 1,3ghz.
Edit: oh and choose for governor Hotplug and for i/o sheduler sio (best combination if you ask me..)
Sent from my P920 using XBSA ICS V5
Thanks a lot mate you been help full I can feel my phone really speeding up now.
Once again thank u
Sent from my LG-SU760 using xda app-developers app
bensmokie said:
Thanks a lot mate you been help full I can feel my phone really speeding up now.
Once again thank u
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Glad i could help :good:
have fun!
Sent from my P920 using XBSA ICS V5
hi bensmokie , TMProduct1onZ..
as in my 1st post, i've xbsall ICS now..
and read many post for fixing 4-keys (changing kernel )..
by yesterday, i found this tools... here
my question is :
1. can i use it directly to flash kernel to fix 4 keys? the kernel is based on iodak's kernel.
2. i've read iodaks kernel zipped format. but it should need to install wkpark bootloader
3. i can boot into recovery mode, could i install iodak zipped kernel directly from recovery mode, without doing #2 step?
thanks..
So I installed CM10 for good today, and was pleasantly surprised to find Asphalt 8 suddenly available. Since it's downloading right now (799 MB / 1.55 GB), I got curious. Anybody tried this game? Is it slow? Quick? Fun? Boring? Anything?
PS: If you have stock, you probably can't see the game. If you have CM, you probably can. I have no idea why.
NSDCars5 said:
So I installed CM10 for good today, and was pleasantly surprised to find Asphalt 8 suddenly available. Since it's downloading right now (799 MB / 1.55 GB), I got curious. Anybody tried this game? Is it slow? Quick? Fun? Boring? Anything?
PS: If you have stock, you probably can't see the game. If you have CM, you probably can. I have no idea why.
Click to expand...
Click to collapse
Kinda off topic , but which CM10 did you install? Jjm34 , hsr0, or fxp?
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
KDB223 said:
Kinda off topic , but which CM10 did you install? Jjm34 , hsr0, or fxp?
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
Click to expand...
Click to collapse
jjm34 with hsr0's kernel. FXP has huge issues on my device (home button, calls, major slowdowns, FCs), hsr0's can't hang up a call, and jjm34's doesn't have proper battery (always reports 100%). jjm34 has call fixed, and hsr0's kernel has fixed battery and (bonus!) stable overclock.
1.51 GB out of 1.55! I hate my connection.
NSDCars5 said:
jjm34 with hsr0's kernel. FXP has huge issues on my device (home button, calls, major slowdowns, FCs), hsr0's can't hang up a call, and jjm34's doesn't have proper battery (always reports 100%). jjm34 has call fixed, and hsr0's kernel has fixed battery and (bonus!) stable overclock.
1.51 GB out of 1.55! I hate my connection.
Click to expand...
Click to collapse
Which means the only major bug as of now is video encoding/recording, right?
I had tried asphalt 8 on my phone which is stock rom..it is a little laggy when playing it..I've uninstalled it because i want to play it without any single lag...
Sorry for off topic,has anyone tried to flash hsr0 cm10 kernel on stock rom??
Sent from my C1505 using xda app-developers app
KDB223 said:
Which means the only major bug as of now is video encoding/recording, right?
Click to expand...
Click to collapse
That, and the magnetometer.
kuugatitan98 said:
I had tried asphalt 8 on my phone which is stock rom..it is a little laggy when playing it..I've uninstalled it because i want to play it without any single lag...
Sorry for off topic,has anyone tried to flash hsr0 cm10 kernel on stock rom??
Sent from my C1505 using xda app-developers app
Click to expand...
Click to collapse
CM10 kernel won't work on stock. Something to do with the ramdisk.
Same thing for me, game was a bit laggy. I'm currently installing PurePerformaces X, which will hopefully decrease lag.
NSDCars5 said:
That, and the magnetometer.
CM10 kernel won't work on stock. Something to do with the ramdisk.
Same thing for me, game was a bit laggy. I'm currently installing PurePerformaces X, which will hopefully decrease lag.
Click to expand...
Click to collapse
OMG!
Was about to flash jjm34's CM10 and shut down the internet, and just remebered Pure Performances !!!
Thanks for reminding !! :silly:
Pure performances+Greenify+OC+Superchargers v6[Maybe?]+Seeder[but don't know why I can't seem to get it to work in cm10 rom by hsr]
Must be a solution for the lag.
Wrong section bro...
Dis should be in q & a section
Anyways try NFS most wanted better than asphalt8
Sent from my Xperia Miro using xda premium
zeetwo-raj said:
Wrong section bro...
Dis should be in q & a section
Anyways try NFS most wanted better than asphalt8
Sent from my Xperia Miro using xda premium
Click to expand...
Click to collapse
Last I checked, Asphalt 8 was an app, so Themes and Apps is a valid section as well!
I have MW on my Nexus 7, but the game is too damned big for the E, and I don't have an external SD card right now (and I don't plan to - the internal one's fine for just about everything else).
Tried it ony My AlienROM on Riches Kernel OC to 1.3Ghz Performance Governor, Crossbreeder and Adrenaline Engine, zRam to 26% with Kernel Samepage Mergin and purging of assets checked, works but with slight lag
NSDCars5 said:
Last I checked, Asphalt 8 was an app, so Themes and Apps is a valid section as well!
I have MW on my Nexus 7, but the game is too damned big for the E, and I don't have an external SD card right now (and I don't plan to - the internal one's fine for just about everything else).
Click to expand...
Click to collapse
Well u r asking an ques bout an app not posting an app thats y I told u
anyways let's forget it
Sent from my Xperia Miro using xda premium
Racer X said:
Tried it ony My AlienROM on Riches Kernel OC to 1.3Ghz Performance Governor, Crossbreeder and Adrenaline Engine, zRam to 26% with Kernel Samepage Mergin and purging of assets checked, works but with slight lag
Click to expand...
Click to collapse
Really? The E's got the same guts as the J, but lesser resolution, so in theory it should work less. I had hsr0's kernel, OCed to 1.3 Ghz, interactive governer, zRAM 15%, purging of assets and JIT enabled. It lagged about just enough for me to consider it to be “too slow” and delete it.
I tried to install this on stock firmware on xperia e, at first it said it is incompatible with the xperia e. Then I installed Xposed Framework and All Apps Google Play Module and set the dpi to 240 for the play store. When I launched the play store after this it showed and I could install it but I got error 942 (It is to do with DPI). Therefore the xperia e cannot get Asphalt 8 due to the DPI of the phone which is 160.
Anyone Got a Fix for error 942?
TheXperiaE said:
Pure performances+Greenify+OC+Superchargers v6[Maybe?]+Seeder[but don't know why I can't seem to get it to work in cm10 rom by hsr]
Must be a solution for the lag.
Click to expand...
Click to collapse
There is actually a solution, buy a better phone
Sent from my washing machine.
where i can get the kernel from cm10 by hsr0?
i need that. cause my battery always 100%:crying:
GDay21 said:
where i can get the kernel from cm10 by hsr0?
i need that. cause my battery always 100%:crying:
Click to expand...
Click to collapse
Download this ROM: http://forum.xda-developers.com/showthread.php?t=2518451
Now open the zip file with 7-Zip, WinRAR, or whatever tool you use. You'll see a boot.img file. That's the kernel. Flash it with fastboot.
Here's the thing It's not the Porcessor that runs the game it's the GPU and OC to 1.3Ghz ain't a big thing. Asphalt 8 was meant for Dual core phones and our phones our cheap and entry level so don't expect performance like those big phones like Xperia Z
NSDCars5 said:
Download this ROM: http://forum.xda-developers.com/showthread.php?t=2518451
Now open the zip file with 7-Zip, WinRAR, or whatever tool you use. You'll see a boot.img file. That's the kernel. Flash it with fastboot.
Click to expand...
Click to collapse
thank you
Ketcchup said:
There is actually a solution, buy a better phone
Sent from my washing machine.
Click to expand...
Click to collapse
Oh.
Why do you care?
Not like the message was for you.
Peace.