Database Info

Reverting to official RUU with HardSPL

I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum

flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.

Thank you sir. Greatly appreciated

flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.

One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM

flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.

Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help

wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there

I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.

ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.

This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4

smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?

this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.

Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...

Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz

Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!

angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?

hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)

Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj

HELP PLEASE PLEASE PLEASE (emergency)

Hello guys ..I know it's my first thread and it's kind of mean to ask for a favor from the first time.
but here's what happened .
I have an official windows Mobile 6.1 downloaded from the official htc website on my kaiser (tilt)
but the HTC screen plug in didn't have weather working on it.
so I decided to download some other HTC home plug-in from one of the website
it's called freewarepocketpc.net
after the download I installed it on the storage card memory
installation required restart.
after the restart the problem started
it cannot open windows,
it gets to the today screen then it gets stuck before openning HTC home screen
after it gets stuck it reboots by itself to go back to the same problem
I tried to take the Micro SD card out before i reboot.
but nothing happened .
it will get stuck and reboot.
I took the sim card out but the same thing happened
I wanna format this kaiser but I cannot establish a connection between the computer and the phone ..
so please tell me what to do.
I took the battery out of the phone in home that it goes to factory setting and take the home plug in out ..I'm hoping
but please I need the phone so bad
I have everything on it.
give me some ideas please..at least to format it.
please
I will appreciate it
thanks

Simple........ read the forum.....
Just perform a "Hard Reset"
Your kaiser will be reset back to factory ( all personal files are gone )

Ninlour said:
Hello guys ..I know it's my first thread and it's kind of mean to ask for a favor from the first time.
but here's what happened .
I have an official windows Mobile 6.1 downloaded from the official htc website on my kaiser (tilt)
but the HTC screen plug in didn't have weather working on it.
so I decided to download some other HTC home plug-in from one of the website
it's called freewarepocketpc.net
after the download I installed it on the storage card memory
installation required restart.
after the restart the problem started
it cannot open windows,
it gets to the today screen then it gets stuck before openning HTC home screen
after it gets stuck it reboots by itself to go back to the same problem
I tried to take the Micro SD card out before i reboot.
but nothing happened .
it will get stuck and reboot.
I took the sim card out but the same thing happened
I wanna format this kaiser but I cannot establish a connection between the computer and the phone ..
so please tell me what to do.
I took the battery out of the phone in home that it goes to factory setting and take the home plug in out ..I'm hoping
but please I need the phone so bad
I have everything on it.
give me some ideas please..at least to format it.
please
I will appreciate it
thanks
Click to expand...
Click to collapse
if it wont let you do anything hold down both soft keys and push the stylus and hold them all in/down until the hard reset/clear storage screen comes on, press send to start reset then send to reboot when prompted to

if non of the above work put the phone in bootloader manually (see the wiki) and flash a different rom

sd73ta said:
if non of the above work put the phone in bootloader manually (see the wiki) and flash a different rom
Click to expand...
Click to collapse
yup...
as sd73ta said...
as long as you can put the phone in bootloader mode, your ok
just put it in bootloader mode (keep the camera hard button pressed and insert the stylus for soft reset)
you then see the tri-colored screen known as the bootloader...
then, insert your USB cable and ignore the fact that activesync is not working...
flash the rom you want to flash...and it will work hopefully
there! i just saved you some wiki time reading cause your in a panicked mood but after this please read read read...

thank you so much guys for the fast response..
I can't wait to go home and try it out!!!!
you will save my life this way.
because i use the phone as a modem to get my online classes done.
so now i don't have to go to the library if it worked!

IT WORKEDDDD!!!!!
but i had to download a new ROM..
I used the camera botten with the softrest!!
but you know what I'm in a mood for some customized ROM
what's your favorite one guys?

Ninlour said:
but you know what I'm in a mood for some customized ROM
what's your favorite one guys?
Click to expand...
Click to collapse
Just test all custom rom if u really in mood to use one.
flashing one rom is less than 5mins using SD. Then u will find one which will best suit ur need
p/s : and maybe u could modify ur thread topic since ur prob has been solved

I would use this ROM, they seem very stable and work well on my Tilt. Good luck.
http://forum.xda-developers.com/showthread.php?t=428261

PLEASE READ THIS THREAD BEFORE YOU TRY TO FLASH A COOKED ROM:
http://forum.xda-developers.com/showthread.php?t=433835

Ninlour said:
IT WORKEDDDD!!!!!
but i had to download a new ROM..
I used the camera botten with the softrest!!
but you know what I'm in a mood for some customized ROM
what's your favorite one guys?
Click to expand...
Click to collapse
Best advice I can give you is search and read. Read the wiki. This is an obvious suggestion but it will help in more ways than one. You get the answer to your question but you also learn the correct terminology which HELPS YOU TO ASK THE RIGHT QUESTIONS Since you are new at flashing, i would suggest you keep an open mind, experiment, but research to see if your chosen methodology is good before you turn your device into a brick.
Prerequisites:
1. update your bootloader to something brick proof.
2. make sure you pick a radio which is compatible with the rom you have chosen.
What to look for?
1. Usually the chefs are nice enough to place a date on their threads when they announce a new build. Keep your eyes open for that and also updates within the threads as the builds, bugfixes, and download locations are updated sometimes multiple times a day on hot threads.
2. start with a bloated full build which is full of aps and tweaks and decide what you like/dislike about it. You may find that you rarely use some of the stuff and want to run a bit leaner.
3. Find a completely stripped down lite build and build it up piece by piece with cabs(cabinet file installers). You've now seen both sides of the spectrum while also gaining some flashing experience.
What to do next?
Now that you have decided which utils and apps you need, tweak the settings and dial them in. You'll learn much by playing with settings and watching the behavior of the device change.
And Finally:
Find a build which is as close to what you settled on yourself. Chances are the chefs have put something together which will surpass your expectations and can be modified the way you like it with just a few cabs/tweaks after install.
Good Luck.

Ninlour said:
what's your favorite one guys?
Click to expand...
Click to collapse
Have you read the WIKI?
This is specifically requested that you not start a thread that asks about ROMs. It could get you banned.
Recommend that you start reading before you get yourself into more trouble than you want.

HELP! Bricked!

Tried to flash my wizard from the sd card, computers down. Renamed the nbf file to the name of cingulars stock rom.Went into bootloader, it asked download sd image, hit voice call, got BINFS success, then checksum error. Now my baby won't come out of bootloader. How can I fix this? Will card flash with the tmob stock rom work? Does anyone have a cingular 2.25, 2.25 rom? Is it totally FUBAR? Please help, can't get to a computer.

Sometimes I will get the splash screen, showing ipl/spl 2.25. It is cid unlocked.

As long as you can get to the boot loader you haven’t bricked your phone.
However I would use a computer to flash the ROM, I haven’t read about any success from SD.
“Cingular 8125 ROM Link”

it is easy
use this link tools but this is in spanish
http://forum.xda-developers.com/showthread.php?p=1232665
using this tools you can make work your baby (just roms to flash from version 1.05 to wizard love and the last rom you like)
if you dont understand the spanish letme know or PM

Please do post in English
This could be why I haven’t read anything, does it work?

Thanks all! Now my stupid power switch thingy fell off soooooo I think I'm just gonna buy a new phone. Hey, now the ol' man can't be mad!

I am back in business! Thank you all soooooooo much! I had an old wizard with a busted screen, with SNN wm6.1 rom. I took main board and switched with toasted one and VOILA! Still haven't fixed power button but can turn on with hard reset sequence.I just hit red button instead of green.

witch1 said:
I am back in business! Thank you all soooooooo much! I had an old wizard with a busted screen, with SNN wm6.1 rom. I took main board and switched with toasted one and VOILA! Still haven't fixed power button but can turn on with hard reset sequence.I just hit red button instead of green.
Click to expand...
Click to collapse
Great to hear tht!! But i guess ur Computer is not working for more 2 mnths how can u live without it??

xda2_haseeb said:
Great to hear tht!! But i guess ur Computer is not working for more 2 mnths how can u live without it??
Click to expand...
Click to collapse
Its not easy! I'm getting all weird, according to tha husband!!!!!! But, at least, I still can go online with my wizard and nokia and thats what matters.

witch1 said:
Its not easy! I'm getting all weird, according to tha husband!!!!!! But, at least, I still can go online with my wizard and nokia and thats what matters.
Click to expand...
Click to collapse
I dont live in USA, else i would have fixed your PC, for you the first day it got down... I love PCs and cant see sick "I wish your PC Get Well Soon !!" by the way what is the problem with it? maybe i can solve it from here

Screen is not responding

My screen stopped working suddenly.
It will not respond to anything, no matter how hard I press on it.
What could have gone wrong?
Do I need to flash it back to ATT firmware before I send it back for HTC manufacture warranty?
Thanks for the help !

What rom are you using? Did you try with another ROM? I'm asking because maybe it's not hardware problem.

pilgrim011 said:
What rom are you using? Did you try with another ROM? I'm asking because maybe it's not hardware problem.
Click to expand...
Click to collapse
Hi, I am using RRE Win 6.1 rom, and I have been using it for at least 3 months.
I was just wondering, is it possible that I turn off the touch screen capability accidentally? It was just working fine a few hours ago, and before I tried to make a call, it was just in my pocket.

Well, everything is possible. I would suggest that you flash some other ROM, preferably stock, and if the problem isn"t solved (and this looks like a hardware issue ), revert the phone to stock SPL and bring it to the repair center.

pilgrim011 said:
Well, everything is possible. I would suggest that you flash some other ROM, preferably stock, and if the problem isn"t solved (and this looks like a hardware issue ), revert the phone to stock SPL and bring it to the repair center.
Click to expand...
Click to collapse
I removed the screen protector and saw a dark spot underneath the screen when the screen is off.
But whenever the screen lights up, it looks normal.
So it seems like the screen got damaged, , but I have never dropped the phone, and it's usually inside my pocket.
I flashed the stock ROM, but when it asks me to tap the screen to set up the device, I can't, coz i can't tap it.
Also, how do I revert it back to stock SPL?
Thanks

ah_hin said:
I flashed the stock ROM, but when it asks me to tap the screen to set up the device, I can't, coz i can't tap it.
Click to expand...
Click to collapse
Place a file called "welcome.not" (no quotes) in the root of the SD card - this should bypass the windows welcome screen. (simply make a blank txt file and rename it to welcome.not [make sure it isnt welcome.not.txt])
ah_hin said:
Also, how do I revert it back to stock SPL?
Thanks
Click to expand...
Click to collapse
Read the Hard SPL thread

Beeble said:
Place a file called "welcome.not" (no quotes) in the root of the SD card - this should bypass the windows welcome screen. (simply make a blank txt file and rename it to welcome.not [make sure it isnt welcome.not.txt])
Read the Hard SPL thread
Click to expand...
Click to collapse
I tried running the SPL, but there is a on screen prompt for the botloader.exe, and ask me to let it run or not.
I can't select yes, because the screen doesn't work.
Is there a way to work around this? I tried the enter button, and the circle button, none works.
Thanks

MyMobiler: http://www.mymobiler.com/

pilgrim011 said:
MyMobiler: http://www.mymobiler.com/
Click to expand...
Click to collapse
thanks for the suggestion, but the same goes for mymobiler, when it tries to sync with the phone, it prompts whether the program is allowed to access the phone, so any other things that i can try?

Yes!!
But its a little long winded (and i'm a little drunk - so it could be an interesting journey!!)
this assumes you have a UC capable rom (there are other ways to acheive exactly the same thing - i just dont know enough about them).
1)
Create a UC setup to either
i} install mymobler
and / or
ii} install AEButton plus (and then copy a specific config file over)
2)
Hard reset (having already placed welcome.not on the SD card)
3)
With luck (and for that i mean i think) you will have either pc access to your touch screen (my moblier) or [ii]a keyboard button assigned to left softkey to accept the install (or possibly both if you want!)
(if you like the AEB solution please PM me and i'll make the config file for you)
Once you have that you should be able to install most software & so reset the SPL.
I have no idea if the stock ROM is UC capable - if not:
I dont know if it is possible to restore the SPL to stock and then flash an offical AT&T rom - before you try that route make sure you have read everything, asked the experts if required, and have everything you need - i'm not taking any responsibility for it!!)
(please forgive obvisous errors & typos - while i was out at the pub having a relaxing beer some [email protected] moved all the keys about on my keyboard!)

Wow, same problem happened to me, screens stopped working. You gotta press it with 2 thumbs on the same spot to make it work.

ah_hin said:
My screen stopped working suddenly.
It will not respond to anything, no matter how hard I press on it.
What could have gone wrong?
Do I need to flash it back to ATT firmware before I send it back for HTC manufacture warranty?
Thanks for the help !
Click to expand...
Click to collapse
I just had this very problem with My AT&T Fuze. I have had it for 10 months, and fortunately it was still under warranty. Apparently, there are MANY problems with the touch screen on this model. My previous model was the 8125. There was a frame around the screen, and it offered protection that is not available on the Raphael. To answer your question, I never unlocked or flashed this phone, so I was good as far as the return, but I would HIGHLY recommend that you reflash an authorized (ie OEM) rom to your phone before the exchange.
Good luck!
MrRuss

If you cant fix ur screen,
than HTC's warranty should be able to cover you.
Hopefully.

I went to a Att device support center, and luckily, they exchanged the phone for me.
Thanks for all the help and input !

am i screwed?

if i flashed a gsm radio on a cdma? jus curious cuz i did that

Get your operators ship rom, then flash it via SD card. Reflash HardSPL and then flash a CDMA rom.

Oh dear. I could be wrong, but I seem to remember when someone has done that before, the phone was bricked (i.e. flashing the wrong radio, not just the wrong ROM). I do hope I'm wrong.

steviewevie said:
Oh dear. I could be wrong, but I seem to remember when someone has done that before, the phone was bricked (i.e. flashing the wrong radio, not just the wrong ROM). I do hope I'm wrong.
Click to expand...
Click to collapse
****, I read that too fast and didn't read radio. Yeah, bricked. /end

Hi didn't say he did it, the title "Am i screwed?" "if i flashed a gsm radio on a cdma? jus curious cuz i did that "
-----------------------------------------then he put
I think he needs to repost in ENGLISH please. I cannot undrstand if you flashed it or not, therfore meaning i cannot help
Badwolve1

Badwolve1 said:
Hi didn't say he did it, the title "Am i screwed?" "if i flashed a gsm radio on a cdma? jus curious cuz i did that "
-----------------------------------------then he put
I think he needs to repost in ENGLISH please. I cannot undrstand if you flashed it or not, therfore meaning i cannot help
Badwolve1
Click to expand...
Click to collapse
He said "cuz I did that", i.e. he *did* flash a GSM radio onto a CDMA device.

Suppose, but I would of expected a n00b to of posted something more like
"HELP!!!!
I flashed a sprint radio to my Tmo TP2 and now it wont turn on
PLZ PLZ PLZ HLP ME!"
he seemed rather calm

thanx for posting, well i thought i broke my phone a couple of days ago prior to this bcuz my phone turned off out of nowhere and wouldn't come back on even after being charged for an hr. then it turned on a couple hrs later when trying again. (dont ask me how bcuz Ive never had this problem before) and yes i did flash the wrong radio so im done for right? the reason why im being calm is cuz i thought i was gonna have to replace my phone in the first place. i was hopefully wishing on the inside for a miracle

nom303 said:
thanx for posting, well i thought i broke my phone a couple of days ago prior to this bcuz my phone turned off out of nowhere and wouldn't come back on even after being charged for an hr. then it turned on a couple hrs later when trying again. (dont ask me how bcuz Ive never had this problem before) and yes i did flash the wrong radio so im done for right? the reason why im being calm is cuz i thought i was gonna have to replace my phone in the first place. i was hopefully wishing on the inside for a miracle
Click to expand...
Click to collapse
Well, unless someone comes forward and says otherwise, I'm sorry to say yes, I think you're done. In the past one or two people have posted up a similar scenario and I don't recall them posting to say they fixed it.
It might cost you less than replacing your phone if you pay for your phone to be repaired.

Well possibly not. IF you can still get into bootloader (hold the volume down button when powering on or if device is already on hold down volume down and softreset) first LOOK AT THIS TASK 29 POST HERE BUT DONT DO ANYTHING YET!:
http://forum.xda-developers.com/showthread.php?t=649191
Make sure to download the file provided, extract it to wherever.
Now goto this post here:
http://forum.ppcgeeks.com/showthread.php?t=90342
and download the correct radio for your provider.
Replace the NBH file from the TASK 29 threads package you extracted with the one from your provider.
Run the task29 as instructed.
Once its done it wont boot into a rom you need to go back into bootloader like I told you how before (Volume down and reset) now find your providers stock rom from here:
http://forum.ppcgeeks.com/showthread.php?t=91940
and flash that rom to your phone. Hopefully this will resolve your issue, best of luck to ya mate.
To anyone ready to post disagreeing: Please dont post up saying about task29 and saying it wont work and stuff, I have fixed two worldphone this way because the owners did exactly what he did, in the way I described here.

thanx aestivalisakito im willing to try what your taking about. have a couple of questions tho. its not that im making it go into bootloader. when i hit power it goes str8 to it. could that be a problem for this fix?
my screen sticks at the multi colored screen with writting in the background saying" code error please try again".and i noticed that, one time while powering on b4 getting stuck. it, for a split sec. try to go to the grey screen to flash and says "loading No image found" then back to multi colored screen. does this help any?
also can i use task29 thru sd card?
thanx for your help

nom303 said:
thanx aestivalisakito im willing to try what your taking about. have a couple of questions tho. its not that im making it go into bootloader. when i hit power it goes str8 to it. could that be a problem for this fix?
my screen sticks at the multi colored screen with writting in the background saying" code error please try again".and i noticed that, one time while powering on b4 getting stuck. it, for a split sec. try to go to the grey screen to flash and says "loading No image found" then back to multi colored screen. does this help any?
also can i use task29 thru sd card?
thanx for your help
Click to expand...
Click to collapse
Ahh it appears you weren't that clear. If you get into the multi-coloured screen, you are at bootloader. Download a rom from http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium/Shipped_Roms to get your original shipping rom. Once you have done this, put the nbh on the sdcard named as rhodimg.nbh. Reboot back into bootloader mode. This should then get you able to flash the device with all the proper stuff.
Make sure to get the one for YOUR original provider.

thanx i got it fixed. someone helped me on another forum with the same solution and it worked thanx for ur reply

nom303 said:
thanx i got it fixed. someone helped me on another forum with the same solution and it worked thanx for ur reply
Click to expand...
Click to collapse
Awesome. Glad everyone helped you get your phone back. Just be more careful next time. Cheers!

so all you did was SD card flash an original ROM from your carrier? just asking for future reference.