Database Info

Reverting to official RUU with HardSPL

I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum

flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.

Thank you sir. Greatly appreciated

flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.

One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM

flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.

Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help

wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there

I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.

ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.

This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4

smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?

this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.

Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...

Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz

Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!

angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?

hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)

Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj

RUU error (262) update error

Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...

Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card

Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))

greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.

I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want

i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...

greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!

greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.

hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???

finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one

I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card

Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...

greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.

SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work

I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...

greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.

hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....

Help Flashing rom...

Ok so I have a HTC Touch Pro and eveytime i try to Flash my rom using the HARDSPL, I get a communication error that says, The Update utility cannot connect to your phone. The phone is active sync'd and connected. So I can't figure out what is going on. I hard reset thinking that would help but it didn't. Some one please help me, I just want my phone to run correctly with a new rom and this is driving me absolutely insane.

does it happen when you try to hard spl? or when you try flashing a rom after a hard spl

sycorange said:
Ok so I have a HTC Touch Pro and eveytime i try to Flash my rom using the HARDSPL, I get a communication error that says, The Update utility cannot connect to your phone. The phone is active sync'd and connected. So I can't figure out what is going on. I hard reset thinking that would help but it didn't. Some one please help me, I just want my phone to run correctly with a new rom and this is driving me absolutely insane.
Click to expand...
Click to collapse
Hi,
Seems you run in the Firewall-error... disable (or shutdown your firewall) and try again.
Dirk

Yeah its in HARDSPL but it wouldn't even let me do a stock rom (for ****s and giggles i tried this)...never thought about the firewall ill be home in an hour and will try it out...let you know how it goes thanks for the response

I was wishing that it was that... I disabled my antivirus and my windows firewall was already off...any more ideas? Just to give you guys some facts
1. Touch Pro
2. Trying to use HardSPL to unlock my phone
3. When i try to run it recognizes what rom version I have and tells me what im updating to.
4.I hit next and it goes to the progress bar on the screen.
5. Nothing happens on my phone
6. Then hardspl errors out
???

can anyone help?

sycorange said:
I was wishing that it was that... I disabled my antivirus and my windows firewall was already off...any more ideas? Just to give you guys some facts
1. Touch Pro
2. Trying to use HardSPL to unlock my phone
3. When i try to run it recognizes what rom version I have and tells me what im updating to.
4.I hit next and it goes to the progress bar on the screen.
5. Nothing happens on my phone
6. Then hardspl errors out
???
Click to expand...
Click to collapse
Hi again
I'm not that familiar with HardSPL, but .. do you need to run it every time you flash , or is it only the first time needed ?
And another tought ran through my mind : are you connecting your device directly to your PC, or via a USB-hub ? Hubs tend to be a problem in such ocassions ...
Dirk

thanks again for an answer dirk...You need hardspl the first time only, from there on you can just flash roms...I am also not using a hub...
Two quick notes... 1. I tried to use the cord that came with it to power an external hard drive and it didnt work...then i switched it to my 6700 mini usb and the hard drive did work. So I'll try that cord with my phone.
2. im going to try to do it on one of my clients computers also tonight.
I post back with results....
Thanks again

Kind of sounds like you don't have Hardspl on it. What does it say when you go into bootloader? GSM or CDMA Touch Pro ?

Ok it comes up with tri color bars for a half second then says...
Loading...
No image file!
Than it goes back to the tri color screen and reads as follows...
Security Unlocked
Raph800
SPL-0.37.0000
MicroP-Hermann (LED) V0C85
MicroP-Hermann (KEY) V0685
PSOC-Raph STAGE_EVT v20
Hope this helps!

Also its a CDMA... Sprint Touch Pro

Anyone have something similar happen to them while flashing?

After doing a bunch of reading I understand that the HardSPL didn't work...but im not sure what im doing wrong. I think im messing up the steps somehow?

sycorange said:
After doing a bunch of reading I understand that the HardSPL didn't work...but im not sure what im doing wrong. I think im messing up the steps somehow?
Click to expand...
Click to collapse
Hi again
I don't think you're messing up steps... it looks more like messing up systems. Are you sure the ROM you want to install suits your CDMA-phone ? There are some basic differences between GSM and CDMA...
Dirk

OMG...did i brick my phone?

Ok...so my tp2 is verizon and I did the whole hardspl thing and somehow got the energyrom leo on my fone, and then wen i tried to update to the new sense 2.1 extreme rom, i dont know wat happened. It said to use this custom ruu thing which i clicked on, and wen it updated my fone, my fone does absolutely nothing now cept loading the start screen where it says Touch pro2
I new something was wrong becus at no point was the .nbh that i extracted used, but no ruu came with the file that i downloaded...sighhh so is my fone dead or wat? I tried hard resetting, and although i am able to get to the hard reset page, wen i actually do it, it still just freezes where touch pro2 screen comes out

dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^

starscalling said:
dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^
Click to expand...
Click to collapse
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh

fjgotgame24 said:
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh
Click to expand...
Click to collapse
it wouldnt hurt. Just pretend youve never done anything to the phone.
Write or type out a list of steps for each phase
print it out and cross them off one by one.

thanks
Thanks my TP2 now is working

orobas said:
Thanks my TP2 now is working
Click to expand...
Click to collapse
sweet
just had the black screen of death - lol was like - THE THREAD OF DEATH CURSED ME :> [all good now of course]

Failed flashing with CustomRUU.exe
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott

scottGx said:
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott
Click to expand...
Click to collapse
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps

DaveTheTytnIIGuy said:
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps
Click to expand...
Click to collapse
Apparently, I was flashing a GSM ROM. There really should be better indication of what the ROM is designed for than simply being in a particular form. It wouldn't be any trouble to add a few characters (GSM/CDMA) to the file name to make it clear.
Thanks!

My Verizon tp2 is stuck on the TOUCH pro2 screen when it tries to boot.. It will not hard or soft reset. So it's not being recognized by my pc to do the hardspl thing. I was trying to flash the perfectblack rom but it said it was not for my device...so i tried Energy rom.. it flashed but will not boot.. please help...how do i fix this.

Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.

defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130

dwizzy130 said:
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130
Click to expand...
Click to collapse
Exactly. Even if you have insurance on the TP2, if you sent it back with anything that is not stock, your insurance is probably voided, they probably wont give you your phone back, and you might even have to pay full price for a new one. Good luck man. Definitely should have held out for some responses before you sent it out. If you haven't then that's good, but if you did, your probably out of luck.

defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Why didn't you try what the orginal poster did?
I loaded a GSM rom on my Sprint TP2, I wasn't paying attention to the orginal
Post and just thought oh.. I want this rom..
What I did,
Turn on the device while holding down the Power button and the Volume Down key. If you see Serial and 3-4 colored bars plug in your USB, and reflash with a CDMA Rom.
This fixed my Phone. Credits to the gurus at PPC Geeks. if i find the topic later I'll post it.

*edit: nevermind

*edit: problem resolved

[Q] HTC HD2 CYANIGENMOD7 ANDROID TO STOCK WinMO 6.5 - HELP!!

Hello, guys.
Well, I love android and all, but I have had problems. Overheating problems for the most part, followed by freezes. I love my HTC HD2 too much for letting the problems occure or continue experimenting, since I'm new to the flashing-scene and
stuff.
I'm really looking into getting it back to stock. Can anyone please help? Obviously, I will need the HSPL to be original and everyting.
I have made 2 different ext. partitions I think on the SD card.
Can anyone please help? Any detailed help is HIGHLY appreciated.
BTW: My phone is LEO 512 MB, EUROPE VERSION, not T-mobile! Thanks!!

BUMP!!
Anyone? I'm really in need for this. I would like appreciate some help on this one, guys!

hey there,
to flash your hd2 back to stock windows 6.5 you need the original rom from the htc website. go in the UK version of the website, go to the bottom and select region as United Kingdom. Then click the help button. then select the hd2. go into new and downloads. download the rom upgrade for HD2. make sure you download the normal one, i mean NOT the one for o2 or T-Mobile or stuff like that. once you download the file, power down your fone. then turn it on with the volume down buttone and power button firmly pressed. dont let go until you see a red, green, blue and white screen. this is the bootloader. connect your hd2 to your computer via the usb cable. the "serial" word will change to "usb". all you need to do now is run the rom upgrade you downloaded earlier. run the file. folow the on-screen instructions and VOILA. u r back to stock hd2 with windows 6.5 Let me know how it goes and give me a thanks if u found this useful.

Post this in the dedicated HD2 forum, and you are bound to get more help.
Sent from my HTC Desire S using xda premium

adil1508 said:
hey there,
to flash your hd2 back to stock windows 6.5 you need the original rom from the htc website. go in the UK version of the website, go to the bottom and select region as United Kingdom. Then click the help button. then select the hd2. go into new and downloads. download the rom upgrade for HD2. make sure you download the normal one, i mean NOT the one for o2 or T-Mobile or stuff like that. once you download the file, power down your fone. then turn it on with the volume down buttone and power button firmly pressed. dont let go until you see a red, green, blue and white screen. this is the bootloader. connect your hd2 to your computer via the usb cable. the "serial" word will change to "usb". all you need to do now is run the rom upgrade you downloaded earlier. run the file. folow the on-screen instructions and VOILA. u r back to stock hd2 with windows 6.5 Let me know how it goes and give me a thanks if u found this useful.
Click to expand...
Click to collapse
Hey there. That setup or instruction was my first try. I thought this would not be any problem, but no, it ****ed up the whole phone and software. It was unable to boot or anything after that.
Gladly I renamed ruu.signed to img.signed or something and put it to root on SDcard, and it worked. First time it ****ed up, all though second try it worked (thank god, lol). Now I sent it back for repair, and I think they changed motherboard. Will get it back within a week. But thanks for your help anyways!

OH! well it always runned just fine for me. Anyways atleast youll get your fone repaired.

adil1508 said:
OH! well it always runned just fine for me. Anyways atleast youll get your fone repaired.
Click to expand...
Click to collapse
Hey again!
Yeah, I think it runs just fine for someone, but sometimes it could get a bit messy.
At least I know I was unlucky when I tried. I sent the phone for repair, and they changed the motherboard!
It runs quite smoothly now. Stabile when it starts heating and everything.
Not sure if I will sell it and buy one X or just give it android and run with it for some months/year
Thanks for trying to help anyways.

Hey,
thanx again for the thought. if u have the bugdet definatly go for the one x. . but a word of advice, dont use custom roms on that fone until u absolutely get tired of the default rom. Just a thought to stay safe.. Hope u get it.