I have Alcatel OT-981A android phone. Recently I installed Easy Battery Saver and I let the app to turn off the touch screen when the battery gets very low. When I charged the cell for half an hour the screen used to come back, but all of a sudden the screen never turned back even though I plugged it the whole day. I can see nothing, but I can feel the vibration when I roll my finger over the screen, and I can also answer incoming call using the key pad but I can't see who the caller is. Please, tell me what I should do to remove the app or reset to factory setting.
Thank you
Related
When my phone rings, the screen turns on. It doesn't matter if I lock ir or not. The Answer and Ignore buttons are still pressable on the screen. Is there any registry setting I can change to make it so the screen stays locked when the phone rings?
I still want to have the option of pressing the Answer and Ignore physical buttons on my phone, but I keep accidently hitting answer or ignore on my screen when pulling the phone out of my pocket.
Thanks
If you install ACs Slide 2 Unlock then you will need to slide to answer or ignore a call. Should stoip the accidental pressing of on screen buttons.
That is not an option. It cuts my standby battery life down to half a day. w/o it I can standby w/o recharging for about a week including phone calls. I probably only talk on the phone a few hours a week though.
BTW I failed to mention that I am on WM6.1
What exactly what you like to do?
If you use a regular dialer the phone will turn on anyways.
If you want something else, like S2U2.. you'll have to accept it's requirements.
Tho, I'm not aware of the battery drain issue. my phone's running S2U2 and it's fine.
try playing with the preferences.
Ok so I have a little problem with my HTC Diamond. In options I set to turn-off the backlight after 10s of inactivity which is standard. The problem is that after those 10s I can see that the screen backlight is fading out but it doesn't fade out completly - if you look from an angle it might appear that it's off but if you look at the front of the phone or simply in the dark you can see that the backlight is still on only set to something near 10 or 5%. As you know the battery just sucks in this device and I don't want the backlight to drain it so any ideas or tips on this matter? Of course I can put the phone to sleep mode but I'd just prefer to make the backlight turning off so I can take a look at the screen to for example check the time without having to press any buttons...
Same problem here
After those 10s the screen is not turning off completly, just fading to 5, 10 %. The screen with all the info, the home page let us say, is still visible and drains the battery. I also could just press the power button to turn is completly off, but I would also prefer it to do this manually after ten second.
Did you find a solution to this problem yet?
Help Battery Drain
Same thing here, and my Backlight is stuck to 100% i think,
anyone found a solution to this? any hints?
Guys, i assume youve set the "turn off device if not used for xxx mins" correctly whilst in battery and external power correctly?
If you have, what roms are you using as you give us no information to help any further
Hello,
I had the same problem with ROM 2.03.421.2, date 12/24/08.Back then I had SPB mobile shell installed and a very few applications and I couldn't find the problem. I made a hard reset so now, with nothing installed, the device also enters standby. You should take care because it is possible that the device is not entering standby either and it is making calls. When I had this problem my friends were complaining that I kept calling them and not talking. It is strange as I'm sure I put the device to sleep with the power button. But still, somehow, it was making calls...
I purchased a TD2 yesterday,happy with it. But for an incoming call the vibration is too soft,sometimes I can't feel it in my pocket. Is there any way to make it harder/deeper? and another thing that the battery drained out in just 14-15 hours. Though I had 35-40 mins of call,but the phone didn't turn off during calls. That might mean it doesn't have a proximity sensor for auto turn off screen during calls,it's very needful because it will definitely save some battery. Yes I know I can press the power button to switch off the display in a call but I don't wanna press it every time,so I need something which will automatically do it.
Vibration too soft
Try to use S2U2.
This is nice iPhone like tool I'm using to lock/unlock screen but it has a lot of useful functions, for example - turning off screen on call (great battery saving).
I can't say that your low vibration problem will be solved, but if you trying to use in S2U2 phone module, may be you'll find some suitable options for you.
hi all,
my butterfly's screen just turned black. the phone is still functional because i'm receiving calls, making calls (my lock screen has a shortcut to a contact), receiving notification sounds, and i WAS able to feel the vibration feedback of unlocking my phone.
so basically the screen just lights up black, any ideas on how to reset it?
I tried to guesstimate on the screen where the reset option is, but i can't seem to get the right area after trying like 10 times...
i'm thinking, while i wait for htc to reply, to just let the battery run out?
Hello everyone,
I dropped my phone into a bucket of water over night. After tearing it down and sticking it in to dried rice for 3 days, the phone came to life but behaved very strangely.
At the very first 5 seconds when I turn it on, the phone works flawlessly, then screen automatically turns off and the phone is locked.
After that whenever I unlock it, it keeps turning off (with locking sound). I can turn the screen on if did not unlock the phone, I can also swipe down the quick settings panel but touching on any of the tile will turn the screen off
Once I boot it into TWRP recovery mode , the phone works perfect, screen is bright and all, no automatically turning off
I tried to did factory reset, upgrading Rom (Madhi) but it did not help.
I would be really grateful if someone can tell me what can be wrong with the phone,
Thank you
imFonk said:
Hello everyone,
I dropped my phone into a bucket of water over night. After tearing it down and sticking it in to dried rice for 3 days, the phone came to life but behaved very strangely.
At the very first 5 seconds when I turn it on, the phone works flawlessly, then screen automatically turns off and the phone is locked.
After that whenever I unlock it, it keeps turning off (with locking sound). I can turn the screen on if did not unlock the phone, I can also swipe down the quick settings panel but touching on any of the tile will turn the screen off
Once I boot it into TWRP recovery mode , the phone works perfect, screen is bright and all, no automatically turning off
I tried to did factory reset, upgrading Rom (Madhi) but it did not help.
I would be really grateful if someone can tell me what can be wrong with the phone,
Thank you
Click to expand...
Click to collapse
I think it's just water/corrosion damage. Rice doesn't actually help very much, if at all.