I purchased a TD2 yesterday,happy with it. But for an incoming call the vibration is too soft,sometimes I can't feel it in my pocket. Is there any way to make it harder/deeper? and another thing that the battery drained out in just 14-15 hours. Though I had 35-40 mins of call,but the phone didn't turn off during calls. That might mean it doesn't have a proximity sensor for auto turn off screen during calls,it's very needful because it will definitely save some battery. Yes I know I can press the power button to switch off the display in a call but I don't wanna press it every time,so I need something which will automatically do it.
Vibration too soft
Try to use S2U2.
This is nice iPhone like tool I'm using to lock/unlock screen but it has a lot of useful functions, for example - turning off screen on call (great battery saving).
I can't say that your low vibration problem will be solved, but if you trying to use in S2U2 phone module, may be you'll find some suitable options for you.
Related
I have problem with my keylocking.
I put keylock after 30sec of inactivity.
Phone does lock it but when i put phone in my pocket and after puting in out there are number of programs called and
sometimes even accidently sends sms to some number.
i cant figure out if these buttons do that or side buttons or i just somehow press the touchscreen...
I know this will sound odd, but change your brightness to something a little higher, I have noticed that if my Treo is set to a lower brightness that it will either wakeup on it's own, or not shut off correctly.
This is a know bug indeed. You have to turn brightness to at least 40% to prevent the device from turning on on it's own.
When my phone rings, the screen turns on. It doesn't matter if I lock ir or not. The Answer and Ignore buttons are still pressable on the screen. Is there any registry setting I can change to make it so the screen stays locked when the phone rings?
I still want to have the option of pressing the Answer and Ignore physical buttons on my phone, but I keep accidently hitting answer or ignore on my screen when pulling the phone out of my pocket.
Thanks
If you install ACs Slide 2 Unlock then you will need to slide to answer or ignore a call. Should stoip the accidental pressing of on screen buttons.
That is not an option. It cuts my standby battery life down to half a day. w/o it I can standby w/o recharging for about a week including phone calls. I probably only talk on the phone a few hours a week though.
BTW I failed to mention that I am on WM6.1
What exactly what you like to do?
If you use a regular dialer the phone will turn on anyways.
If you want something else, like S2U2.. you'll have to accept it's requirements.
Tho, I'm not aware of the battery drain issue. my phone's running S2U2 and it's fine.
try playing with the preferences.
Ok so I have a little problem with my HTC Diamond. In options I set to turn-off the backlight after 10s of inactivity which is standard. The problem is that after those 10s I can see that the screen backlight is fading out but it doesn't fade out completly - if you look from an angle it might appear that it's off but if you look at the front of the phone or simply in the dark you can see that the backlight is still on only set to something near 10 or 5%. As you know the battery just sucks in this device and I don't want the backlight to drain it so any ideas or tips on this matter? Of course I can put the phone to sleep mode but I'd just prefer to make the backlight turning off so I can take a look at the screen to for example check the time without having to press any buttons...
Same problem here
After those 10s the screen is not turning off completly, just fading to 5, 10 %. The screen with all the info, the home page let us say, is still visible and drains the battery. I also could just press the power button to turn is completly off, but I would also prefer it to do this manually after ten second.
Did you find a solution to this problem yet?
Help Battery Drain
Same thing here, and my Backlight is stuck to 100% i think,
anyone found a solution to this? any hints?
Guys, i assume youve set the "turn off device if not used for xxx mins" correctly whilst in battery and external power correctly?
If you have, what roms are you using as you give us no information to help any further
Hello,
I had the same problem with ROM 2.03.421.2, date 12/24/08.Back then I had SPB mobile shell installed and a very few applications and I couldn't find the problem. I made a hard reset so now, with nothing installed, the device also enters standby. You should take care because it is possible that the device is not entering standby either and it is making calls. When I had this problem my friends were complaining that I kept calling them and not talking. It is strange as I'm sure I put the device to sleep with the power button. But still, somehow, it was making calls...
Hi all!
I have the fingerprint locked option enabled. I find that sometimes, somehow the phone vibrates when it is in my pocket. When i take the phone out of my pocket, it will say fingerprint lock disabled. It's as though it is detecting the inside of pocket as a print, that's trying to unlock the phone. I also find that the flashlight turns it self on whilst it is in my pocket and also the bluetooth and wifi.
Is anyone having similar issues?
Finding it really annoying.
I've found some of my settings changed before, and I've noticed that the double tap to wake will work through thin material . . . like a jeans pocket.
When you put it in your pocket, turn the screen towards your body and see if that helps. Failing that, try disabling double tap to wake.
I've not had the fingerprint sensor disabled message myself, but the sensor can also trigger through thin material too. It obviously won't read any fingerprint, so if it happens a few times, it just temporarily disables the sensor.
I had to disable the double-tap to wake screen option as it was always triggering in my pocket (screen facing in). I only have screen lock set to swipe though so walking/climbing stairs was waking the screen, pulling down the notification panel and going to town changing settings. I even somehow managed to change the time display setting from 24 hour to 12 hour. I mean, how the hell can that happen in a short few minutes in a pocket?!
Glove mode is/was off if anyone thinks that might be the cause. No screen protector either.
I only have the sensor lock if my finger fails to unlock the phone after a few tries. Every time the fingerprint is not properly read it will vibrate, after about 4 go's, it locks and you need to type in your pin. I'm guessing something is pressing the power button in your pocket and it's trying to scan your finger but failing, so by the time you pull it out, it's locked itself!
I too had to diable double tap to wake because it kept coming on in my pocket. even if it does not get past the fingerpring lock it still wastes some battery.
it would be nice if something could be done in tasker to:
if phone is flat on table(accelerometer)
then enable double tap to wake.
else disable it.
DT2W is wayyy too sensible at the moment. I hope Sony will fix it. A touch or double touch shouldn't be detected through clothes when the screen is off.
That feature was perfectly tweaked on my OnePlus One running CM12.1, and I liked to use it
Yeah I find the screen touch, fingerprint and rotation all way too sensitive. I have already disabled 2 of them, fingerprint is next....
Sent from my E6653
Ditto with the tap to wake frustratingly waking my phone constantly in my pocket. Never had the problem with the Z3. So many issues with this phone that were perfect on the Z3 feel like I've gone backwards.
same issue here, tap to wake activated and called the cops on me LOL...OMG
This is so annoying. My phone always wakes (through dt2w) when in my pocket and does weird stuff: changes settings, calls people, etc...
The one thing I found working for me is keeping the screen facing away from my body while in my pocket. It doesn't wake the phone up then.
I have this problem as well.
Try gravity screen app. It should turn off the screen in 1 second or less should it accidentally turn on while in the pocket.
This has bothered me loads so i've disabled the feature. You'd think they would make use of the light sensor to detect if the phone is in the pocket and then not unlock the phone on double-tab. There's the standard Google 'on-body' feature which can be used to disable security when the phone is detected as on your person.
and this is how a very useful feature quickly became most annoying issue... because of a defective light sensor or its faulty software development.
another thing I don't understand: if screen is locked, why notification access isn't ?!? at least they should put an option to enable or disable it.
sony customer care ?!?
...
sadonlyone said:
another thing I don't understand: if screen is locked, why notification access isn't ?!? at least they should put an option to enable or disable it.
sony customer care ?!?
Click to expand...
Click to collapse
That's actually standard Android behaviour would you believe - both Lollipop and Marshmallow. Don't expect a "fix" for this anytime soon...
It's configurable on iPhone though. Go iOS!
I had to disable the double-tap to wake screen option as it was always triggering in my pocket (screen facing in). I only have screen lock set to swipe though so walking/climbing stairs was waking the screen, pulling down the notification panel and going to town changing settings. I even somehow managed to change the time display setting from 24 hour to 12 hour. I mean, how the hell can that happen in a short few minutes in a pocket?!
When I make a call and hold the device to my ear, the screen goes off. And that's fine. But when I remove the device from my ear, the screen is still black. I say goodbye to the caller, and to interrupt the conversation I have to press the power button or double tapp screen to wake the screen. Is there any option to wake the screen more actively?
The same problem here....
I hope they will fix this in future updates. My friend dont have this problem. On other forum some guy told me that i need move phone and i will get phone wake up. On my other phone (s9+) i dont have this problem. This problem have many s10 series phone. I read that the problem is because proximity sensor position. And AOD dont turn off when is phone in a pocket or screen down wich use more battery.
I tried old good wipe cache in recovery and...it's good, problem is gone.
Try it too!
I try. It didn't help
Same problem as well, it doesn't happen always but often enough to annoy me...
yeah, same problem here man
same problem.. if you turn your phone upside down it will get the movement and show the screen but don't think this is actually a good workaround! does anyone know if there is something to do for it?