Database Info

ClockworkMod Recovery 3.0.0.5

This is the latest ClockworkMod Recovery!! Instructions to install below
Downloads At bottom of page.
I am not responsible if you brick or damage your phone... blah blah blah... NANDROID FIRST cuz u never know wut might happen XD.
Method I
Flash recovery using: ADB
NOTE: This method will work while you are booting into the current recovery on the phone.
Download ClockworkMod Recovery 3.0.0.5
Copy the recovery.img to root of the SD card.
Boot the phone into recovery.
Open command prompt.
Change directory to the AndroidSDK directory & type the following commands:
adb shell
mount sdcard
flash_image recovery /sdcard/"name of recovery".img
reboot recovery
Your phone should now reboot into the ClockworkMod Recovery (orange text for 3.0+).
Method II
Flash recovery using: RomManager
Download ClockworkMod Recovery 3.0.0.5
On the SD card, go to: /clockworkmod/download/mirror.sea.tdrevolution.net/cm/recoveries.
Rename the old image there named recovery-clockwork-2.5.0.7-heroc.img to recovery-clockwork-2.5.0.7-xxx.img.
Move recovery-clockwork-3.0.0.5-heroc.img to that folder and rename it to recovery-clockwork-2.5.0.7-heroc.img.
Open RomManager and press Flash ClockworkMod Recovery and reboot the phone to recovery, you should see the orange text.
Method III
Method III
Flash recovery using: H-Boot/S-Off Only
Download HERCIMG.zip
md5: 6dcd265a51cc7090824d7f9f889b370b
Move HERCIMG.zip to root of the SD card.
Power off the phone.
Hold the Volume Down and Power buttons until the phone boots into the bootloader.
Wait for bootloader to scan and find HERCIMG.zip.
Press action to install.
The phone should now reboot into the ClockworkMod Recovery (orange text for 3.0+).
http://www.mediafire.com/?2gwhom1m06tbboy - ClockworkMod Recovery 3.0.0.5
http://www.mediafire.com/?u86sj1w22db8kbt - HERCIMG.zip
thanks to romrepo.info/wiki

It would be great if someone could leave some screenshots for me.. i dont have the emulator on this computer srry.

deke2010 said:
It would be great if someone could leave some screenshots for me.. i dont have the emulator on this computer srry.
Click to expand...
Click to collapse
Check in the dev section for my thread on how to install adb. You'll have it up and running in like 15 to 20 min tops
Root-Hack-Mod-Always™

laie1472 said:
Check in the dev section for my thread on how to install adb. You'll have it up and running in like 15 to 20 min tops
Root-Hack-Mod-Always™
Click to expand...
Click to collapse
Im using my dads computer and i cant install anything on it soo..

deke2010 said:
Im using my dads computer and i cant install anything on it soo..
Click to expand...
Click to collapse
You can do all of what the op posted on your phone. Just follow his instructions and you should be fine
Root-Hack-Mod-Always™

laie1472 said:
You can do all of what the op posted on your phone. Just follow his instructions and you should be fine
Root-Hack-Mod-Always™
Click to expand...
Click to collapse
i already have it on my phone but i cant get screenshots without the emulator on the pc which i cant install cuz its my dads computer.

When I download the recovery from my phone it downloads as a txt file. Do I rename it to recovery.img and push it that way.
Sent from my DROIDX using XDA App
EDIT nevermind I did the S Off method worked perfectly.

METHOD1911 said:
When I download the recovery from my phone it downloads as a txt file. Do I rename it to recovery.img and push it that way.
Sent from my DROIDX using XDA App
EDIT nevermind I did the S Off method worked perfectly.
Click to expand...
Click to collapse
Glad you got it working. To answer the question about .txt on the phone, others have reported that using a different browser works for downloading the .img file correctly. I think they used Dolphin browser from the market.

I tried method 2 and method 3 above without success. Trying to go from 2.5.0.1 to 3.0.0.5. Attempts to boot into recovery and then reboots again and boots normally. Suggestions?

Try the ADB method?

stayclean said:
Try the ADB method?
Click to expand...
Click to collapse
I will try that now. Quotes necessary around the filename?

No, do not use quotes.

kynov said:
I tried method 2 and method 3 above without success. Trying to go from 2.5.0.1 to 3.0.0.5. Attempts to boot into recovery and then reboots again and boots normally. Suggestions?
Click to expand...
Click to collapse
don't flash the 3.0.0.5, you don't need it for GB. the reason I think people have been having so much trouble is that the recovery is overclocked, so some phones can't handle it. same thing goes for the GB rom, if it loops and hangs etc., just flash a capped 691 kernel after the rom and gapps, it *should* work.
OK NOW - TO ALL FUTURE POSTS - PLEASE DON'T, LOL.
AOSP MADE THIS RECOVERY AND IS CONSTANTLY UPDATING IT
3.0.0.5 CAN BE FOUND IN THE 2.3 GINGERBREAD THREAD
INSTALL METHODS CAN BE FOUND ON THE THREAD "READ ME" WIKI,
DIFFERENT VERSIONS CAN BE FOUND ON ROMREPO.INFO

il Duce said:
don't flash the 3.0.0.5, you don't need it for GB. the reason I think people have been having so much trouble is that the recovery is overclocked, so some phones can't handle it. same thing goes for the GB rom, if it loops and hangs etc., just flash a capped 691 kernel after the rom and gapps, it *should* work.
OK NOW - TO ALL FUTURE POSTS - PLEASE DON'T, LOL.
AOSP MADE THIS RECOVERY AND IS CONSTANTLY UPDATING IT
3.0.0.5 CAN BE FOUND IN THE 2.3 GINGERBREAD THREAD
INSTALL METHODS CAN BE FOUND ON THE THREAD "READ ME" WIKI,
DIFFERENT VERSIONS CAN BE FOUND ON ROMREPO.INFO
Click to expand...
Click to collapse
AOSP didn't make CWM.....

stayclean said:
Try the ADB method?
Click to expand...
Click to collapse
EDIT: Managed to get 2.5.0.1 back on there. Gonna leave it as-is.

What's the clock speed on this?

theimpaler747 said:
AOSP didn't make CWM.....
Click to expand...
Click to collapse
ok Koush did, I know, but the version we are using is tweaked by him.
would you correct me if I said he made his rom, because technincally google MADE it, but he did in fact tweak it,build it,compile it, for the hero.
@aiwetir - 768

Method III worked fine for me. Just follow instructions carefully, and don't forget to do "su" first (lets terminal use root privileges).
I'm curious why RomManager doesn't update the version number. I know I'm using 3.0.0.5 because of the new orange text, but RomManager still shows 2.5.0.1
Anyone?

theimpaler747 said:
AOSP didn't make CWM.....
Click to expand...
Click to collapse
Pretty sure he tweaked cwm3.0.0.5 to make it work for our phones ... I'm sure duce didn't mean he made it made it just wrong wordage lol come on Impaler. You know aosp be a tweaker to make our phones the **** lol
Sent from my HTC Hero CDMA using XDA App

il Duce said:
ok Koush did, I know, but the version we are using is tweaked by him.
@aiwetir - 768
Click to expand...
Click to collapse
Beat me to it haha ... Impaler just hating caus3 his epic isn't as awesome as our hero's hahaha jk
Sent from my HTC Hero CDMA using XDA App

Everything Updated in one Place with CM 6.2 and CWM recovery

Okay so I went and got the latest working updates from everything and put it in a convenient package for you.
One Click Root Apk: Version 0.1.0
Radio: 2.42.02.10.29
HBoot: 1.47.0000
Kernel: 2.6.29.6 (up to 768 Mhz and its stable )
ClockworkMod Recovery: 3.0.0.5
CynanogenMod: 6.2 - No longer needed
S-OFF
Step by Step Instructions below.
The instructions are only for people running CynanogenMod and ClockworkMod recovery.
Unzip everything.zip to your sdcard
Also put Kernel.zip on your sdcard
You HAVE to install these in a specific order otherwise some things won't work.
Flash CynanogenMod 6.2 if you havent already. It has the latest kernel in it already which goes up to 768 Mhz. http://forum.xda-developers.com/showthread.php?t=731659 here's the new link
Install Rom Manager and flash ClockworkMod recovery 2.5.0.1. Now you MUST backup with it.
Run the ruu included in the zip. this will give you the latest HBoot.
Boot into hboot mode (volume down and power button) and look to make sure it installed HBoot 1.4.7.0000
reboot
install heroroot010.apk
run heroroot.apk and it will give you darchstar's recovery and put a file on your sdcard called rootme.zip
reboot
reboot into Darchstar's recovery
flash rootme.zip
reboot
you now should have root and should have the super user app. if you dont then something went wrong and you should try again.
if you have root, download rom manager and flash ClockworkMod 2.5.0.1
restore your backup with ClockworkMod recovery
reboot
reboot to recovery
flash radio.zip
it will tell you to reboot after it is done.
this boot will take a while so be patient
reboot again
reboot into recovery
wipe dalvik
flash kernel.zip
reboot
reboot recovery
warning: there is no hboot s-on for the cdma hero YET. they are working on it though.
flash S_OFF.zip
reboot
you now have hboot s-off
reboot into recovery
plug phone into computer
run the following code in adb:
adb shell
mount sdcard
flash_image recovery /sdcard/CWMR3.0.0.5.img
exit
adb reboot recovery
reboot
done!
Update: Heres the link to Everything.zip and Kernel.zip: http://www.mediafire.com/?tj5a734t7n6gi
Thanks to jcase for the root apk
Thanks to theimpaler747 for the new radio
Thanks to Whosdaman for the ruu with the new hboot in it
Thanks to Decad3nce the updated kernel
Thanks to regaw_leinad for the S-Off
Thanks to aosp and ClockworkMod for the recovery

Thanks for all the info Deke -- is there some sort of package that is included with this? I don't see anything...

AboveUnrefined said:
Thanks for all the info Deke -- is there some sort of package that is included with this? I don't see anything...
Click to expand...
Click to collapse
yeah sorry. im having troubles uploading it. it will be on here as soon as posible
Edit: Everything.zip is now uploaded! enjoy!

CynanogenMod: 6.2 ?
When did this happen ?

PTown599 said:
CynanogenMod: 6.2 ?
When did this happen ?
Click to expand...
Click to collapse
bout a week ago

6.2 has been around since mid to late December... if not earlier.
P.S. You may wish to give people credit where credit is due.

You're a hero with a hero -- saved me boat loads of time!

I don't see anything named cyanogenmod 6.2 in the zip or the provided link...

Squiggy45 said:
I don't see anything named cyanogenmod 6.2 in the zip or the provided link...
Click to expand...
Click to collapse
Isn't there a lot of places that can be found?

A lot of places? I have 't found one. The contents of everything.zip is:
CWMR3.0.0.5.img
heroroot010.apk
Radio.zip
RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe
S_OFF.zip
No cyanogenmod...

Squiggy45 said:
A lot of places? I have 't found one. The contents of everything.zip is:
CWMR3.0.0.5.img
heroroot010.apk
Radio.zip
RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe
S_OFF.zip
No cyanogenmod...
Click to expand...
Click to collapse
Here's at least one CM 6.2 build
http://forum.xda-developers.com/showthread.php?t=731659

You really need to credit the people who made this stuff in your op unless you want to get infracted or banned. Also this is a pointless thread as these things can be easily found by searching. And you haven't developed anything here so this should be in another forum, not development. Seems like you just keep making threads in development of other peoples work for no reason. Way to go.
sent from my hero, which no longer sucks ass

Squiggy45 said:
A lot of places? I have 't found one. The contents of everything.zip is:
CWMR3.0.0.5.img
heroroot010.apk
Radio.zip
RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe
S_OFF.zip
No cyanogenmod...
Click to expand...
Click to collapse
i didnt put it in everything.zip cuz i didnt have time. I put the wrong link.. sorry. i just updated the link so try it now.

il Duce said:
You really need to credit the people who made this stuff in your op unless you want to get infracted or banned. Also this is a pointless thread as these things can be easily found by searching. And you haven't developed anything here so this should be in another forum, not development. Seems like you just keep making threads in development of other peoples work for no reason. Way to go.
sent from my hero, which no longer sucks ass
Click to expand...
Click to collapse
Im putting on the credits now and this is just a package that has everything in it so people DONT have to search for it so it saves them a lot of time plus it has step by step instructions 4 people who dont know how.. and there is no where else to put it otherwise i would.

Q & A would be a tad more appropriate since nothing is being developed here.

kk. will do next time. and if u guys want anymore of these packages pm me da details. itll be in q and a from now on

Since when is there a CM 6.2? The last stable release is 6.1. Anything else is unstably/nightly/unofficial
http://forum.cyanogenmod.com/files/category/17-htc-hero-cdma/

its been out for a while dude. just look at the link i posted. completely stable. idk why they havnt updated they're site yet. http://forum.xda-developers.com/showthread.php?t=731659

That's not 6.2, that's some custom build. Don't know why it's called 6.2, as there never was a 6.2, they went straight into 7

EGOvoruhk said:
That's not 6.2, that's some custom build. Don't know why it's called 6.2, as there never was a 6.2, they went straight into 7
Click to expand...
Click to collapse
Some phones did get pushed to 6.2, the jaybob build was synced with basically the last of the 6.x Hero source.

Quick Question, Google

I flashed a rom and I'm stuck on the GOOGLE screen. Roms flash completely but after I reboot the screen stays in GOOGLE?
Any ideas what I can do? I hard reset and no go!

Do a full wipe. Factory data then wipe the cache and dalvik then reflash the rom.

jerrycycle said:
Do a full wipe. Factory data then wipe the cache and dalvik then reflash the rom.
Click to expand...
Click to collapse
Thanks, I did that and than I go into recovry and flash a rom and it either freezes half way whil installing or it goes all the way through. BUT, once I reboot it stays on the GOOGLE logo forever!
Any other ideas?

Check the md5 and make sure your download was not corrupt. What rom are you trying to flash? It is for the nexus s correct.

jerrycycle said:
Check the md5 and make sure your download was not corrupt. What rom are you trying to flash? It is for the nexus s correct.
Click to expand...
Click to collapse
I'm sorry but what is the MD5? And I have tried a few roms for nexus s. Latest one is BOFTAIN-NS-V1.
Btw, when I install a rom i get E:ERROR IN /SDCARD/MIUIDEV.....ZIP (STATUS 7)."INSTALLATION ABORTED" What does STATUS 7 MEAN?

MD5 has (or checksum) functions as a compact digital fingerprint of a file. The download file and on both ends should have the same number. As for the status 7 not sure. I have never had that issue. I do recall others in the past did. What recovery version do you have?

I tried another thread that said to download the stock 2.3 gingerbread.... and the file is a backup for the nandroid something something. I did just as the instructiond stated.
But when it tries to restore it says CAN'T MOUNT SYSTEM. and it stops right there.
FASTBOOT VERSION SAYS REV 11
RECOVERY - CLOCKWORKMOD V2.5.1.8

JasjarMan said:
I tried another thread that said to download the stock 2.3 gingerbread.... and the file is a backup for the nandroid something something. I did just as the instructiond stated.
But when it tries to restore it says CAN'T MOUNT SYSTEM. and it stops right there.
FASTBOOT VERSION SAYS REV 11
RECOVERY - CLOCKWORKMOD V2.5.1.8
Click to expand...
Click to collapse
um... you need to update your clockwork, i dont know why you have a v2.x.x.x recovery version at all.. its not compatible with the NS

zephik said:
um... You need to update your clockwork, i dont know why you have a v2.x.x.x recovery version at all.. Its not compatible with the ns
Click to expand...
Click to collapse
GOT IT! I downloaded and flash 3.0 version and its working!
THANK YOU SO MUCH!

I have the latest one.
It's v 3.0.2.4 CWM
Topic: http://forum.xda-developers.com/showthread.php?t=988686
Don't forget to download the right one.
If you have nexus s super clear lcd (i9023) download the second one.
If you have the other one w/ SAMOLED (i9020) it's the first.
And flash it via fastboot
" fastboot flash recovery 3024v3-i9020.img "
Hope it helps

liquelt said:
I have the latest one.
It's v 3.0.2.4 CWM
Topic: http://forum.xda-developers.com/showthread.php?t=988686
Don't forget to download the right one.
If you have nexus s super clear lcd (i9023) download the second one.
If you have the other one w/ SAMOLED (i9020) it's the first.
And flash it via fastboot
" fastboot flash recovery 3024v3-i9020.img "
Hope it helps
Click to expand...
Click to collapse
The 3.0.2.4 CWM is a unofficial release. The official release is 3.0.0.5.
But regardless, both should work the same.
@Jasjer: Glad to hear its working

Sorry. I just put this because I think is better because I really don't like the lots of no's on 3.0.0.5 .
Thanks in advance.
Sent from my Nexus S using XDA Premium App

liquelt said:
Sorry. I just put this because I think is better because I really don't like the lots of no's on 3.0.0.5 .
Thanks in advance.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
yeah thats the only obvious change.. unofficial doesn't necessarily mean bad, just saying if you encounter bugs with the unofficial one try the official one.
i personally use 3.0.0.5 because im used to the No's

[HOW-TO] Flash the latest radio for your One S

There is a guide on how to flash a new radio on the One S, but its outdated and obsolete.
While we still dont have S-OFF yet, there is a trick that lets you flash radio images.
Requirements.
The latest TWRP recovery image. Available here.
Grab the latest US or EU radio here and copy it to your SD Card. (adb push filename.zip /sdcard/radio.zip) Click the changelog-button to see which radio's are US and EU.
Lets get flashing
Reboot your device into the bootloader.
Code:
adb reboot bootloader
Use fastboot to boot up into recovery.
Code:
fastboot boot openrecovery-twrp-2.3.1.0-ville.img
You will boot directly into recovery from the recovery image, and no restrictions apply. Now simply flash the radio.zip file that you pushed over earlier, and you're all set!
Enjoy!
Credits to xkonni for the tip!

Is it really bad if I flash a EU radio on my TMOBUS device? I have done so 24hrs ago and notice very fast speeds and good signal strength. I don't get why there is a difference.

Closed Source Project said:
Is it really bad if I flash a EU radio on my TMOBUS device? I have done so 24hrs ago and notice very fast speeds and good signal strength. I don't get why there is a difference.
Click to expand...
Click to collapse
i would like to know the answer to this also

No it works great on my tmobile one s no problems here
sent from a guy living in a van down by the river

Untouchab1e said:
There is a guide on how to flash a new radio on the One S, but its outdated and obsolete.
While we still dont have S-OFF yet, there is a trick that lets you flash radio images.
Requirements.
The latest clockwork recovery image. Available here. Make sure you get the latest version for the Ville. (released on or after 29-apr-2012).
Grab the latest US or EU radio here and copy it to your SD Card. (adb push filename.zip /sdcard/radio.zip) Click the changelog-button to see which radio's are US and EU.
Lets get flashing
Reboot your device into the bootloader.
Code:
adb reboot bootloader
Use fastboot to boot up into recovery.
Code:
fastboot boot recovery-clockwork-5.5.0.4-ville.img
You will boot directly into recovery from the recovery image, and no restrictions apply. Now simply flash the radio.zip file that you pushed over earlier, and you're all set!
Enjoy!
Credits to xkonni for the tip!
Click to expand...
Click to collapse
got the same result by just rebooting into bootloader, then choosing fastboot>recovery.....then chose radio.zip i placed on "sdcard"...never having to plug phone into PC

On leedroid without the radio it gets about 12mb but with this radio i get 10mb, when i load the same site, this radio loads about 2seconds faster..tmobUS thanx btw

I too just flashed the .zip from Clockwork Recovery from my T-Mobile US phone for the EU radio. Working just fine.

I'm getting an error when I enter stock recovery that it can't find /sdcard cause the file doesn't exist... a little help please

ralph96gt said:
I'm getting an error when I enter stock recovery that it can't find /sdcard cause the file doesn't exist... a little help please
Click to expand...
Click to collapse
Had the exact same problem as you.
I just flashed the recovery with CWM recovery image. The one in this topic didn't work for me cause it wouldn't mount the /sdcard either. I used a different version.
Then I just installed the radio.zip from this topic.

So if I have the last CWM, just I have to put the zip to the SD, and flash it from recovery?
Edit: The radio I have now is the 0.15.31501S.19_2_10.13.31501S.06L

cualla84 said:
So if I have the last CWM, just I have to put the zip to the SD, and flash it from recovery?
Edit: The radio I have now is the 0.15.31501S.19_2_10.13.31501S.06L
Click to expand...
Click to collapse
From what Ive been told, and what I did, was to boot directly into the latest recovery image. Meaning, you dont flash the recovery image first, you simply fastboot boot into it, then you flash the radio.zip from there.
Again, make sure you pick the newest version of the recovery image.

Untouchab1e said:
From what Ive been told, and what I did, was to boot directly into the latest recovery image. Meaning, you dont flash the recovery image first, you simply fastboot boot into it, then you flash the radio.zip from there.
Again, make sure you pick the newest version of the recovery image.
Click to expand...
Click to collapse
Thank you! I have the CWM 5.8.3.1. I have to wipe before flashing?

cualla84 said:
Thank you! I have the CWM 5.8.3.1. I have to wipe before flashing?
Click to expand...
Click to collapse
No, you dont have to wipe data before flashing a new radio.

Untouchab1e said:
No, you dont have to wipe data before flashing a new radio.
Click to expand...
Click to collapse
Thank you very much! I'll make a nandroid my rom, and flash radio and alpha8 of CM9

cualla84 said:
Thank you very much! I'll make a nandroid my rom, and flash radio and alpha8 of CM9
Click to expand...
Click to collapse
Sounds like a good plan! Enjoy Alpha8. Nightly builds are available too (check signature)

Untouchab1e said:
Sounds like a good plan! Enjoy Alpha8. Nightly builds are available too (check signature)
Click to expand...
Click to collapse
Better then flash the nightly? What improvements have regarding alpha8? I can´t see the features!

cualla84 said:
Better then flash the nightly? What improvements have regarding alpha8? I can´t see the features!
Click to expand...
Click to collapse
No Ville-specific improvements, just the latest CM9 commits. Its basically the exact same ROM, just with the latest CM9 improvements.

Thanks Untouchab1e!
Untouchab1e said:
No Ville-specific improvements, just the latest CM9 commits. Its basically the exact same ROM, just with the latest CM9 improvements.
Click to expand...
Click to collapse
OK! I will charge the battery and I get to it!

Flashed 1.78 EU radio to stock tmous and I'm getting zero issues and excellent battery life so far. Thx
Sent from my HTC VLE_U using xda premium

flash directly from cwm?
having already unlocked, root and flashed the latest cwm, can't i just move the radio.zip file to the phone and flash directly in cwm instead of all commands?

[RECOVERY][3.2.3-0][shark]Unofficial TWRP recovery for BlackShark (Testing)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decrypt is not working for now
- Backup still have some problems use it carefully
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot boot recoveryimgfilename.img" in command line (if you want to have it permanently you should flash the installer)
5. If you will flash the installer and you are stock you need also to flash magisk or your phone will not boot again
6. Enjoy it
How to flash a custom Rom:
Boot twrp
Flash rom
Flash twrp installer
Boot twrp
Wipe data & art cache
Flash magisk
Reboot
Tips:
If you alread have a twrp flashed you can only flash the new installer zip to update your TWRP (remember to flash again magisk or your system will not boot).
If you have some problems with backup, like 255 error or something similar please check this guide: https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
For the Bacups use always "system_image" and "vendor_image" instead of "system" and "vendor".
Download:
TWRP 3.2.3-0 Unofficial by mauronofrio
TWRP 3.2.3-0 Unofficial Installer by mauronofrio
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_blackshark_shark
Donations:
Credits:
Thanks to @kanded for the testing
Created 2019-01-23

finally. thanks for the hardworking. i will check if it works or not.

Thank you for your hard work.
Seem this rec was for international version, as it showed SKR-H0 when I connected to the phone to PC.
As for CN ver in which I made the try, it reverses the screen.
To me, the decryption has gone after wiping /data and booting again using fastboot.
Backup was smooth. MTP mount was also great.
Now I'm trying flashing magisk. Will update ASAP
---------- Post added at 08:10 AM ---------- Previous post was at 07:42 AM ----------
Updating
CN version works great with back up and magisk using the TWRP from the OP, just remember to boot into stock recovery to wipe after magisk flashing as I could not reboot successfully from TWRP.
As for installing this rec permanently, I have not tried.
Once more time, thank you.

This is great news! I really love the progress we have made as a community!
Thank you for your hard work, I'll be testing it today
EDIT: tested, here are the problems found so far testing it on a chinese SKR-A0:
- the image on the display is upside down but the touch is right, so navigating the menus requires some effort

loriz said:
This is great news! I really love the progress we have made as a community!
Thank you for your hard work, I'll be testing it today
EDIT: tested, here are the problems found so far testing it on a chinese SKR-A0:
- the image on the display is upside down but the touch is right, so navigating the menus requires some effort
Click to expand...
Click to collapse
If needed i can fix upside down display, but why one version is upside down and the other one not?

mauronofrio said:
If needed i can fix upside down display, but why one version is upside down and the other one not?
Click to expand...
Click to collapse
I got no idea on this actually it works, just the cosmetic issue. I think spending on next release with other issue is better than concentrating on this small one.
Appreciated your work and hope to see the update

ndt192 said:
I got no idea on this actually it works, just the cosmetic issue. I think spending on next release with other issue is better than concentrating on this small one.
Appreciated your work and hope to see the update
Click to expand...
Click to collapse
Test this twrp, if the screen is good and touchscreen works:
https://www.androidfilehost.com/?fid=11410963190603906667

mauronofrio said:
Test this twrp, if the screen is good and touchscreen works:
Click to expand...
Click to collapse
Nothing changed.
The screen is turned upside down as in the first version

Hello guys. I installed TWRP, well, when I tried to put Magisk, something went wrong, and now I can not log in to the system, the boot sign in the system constantly hangs. I can not delete Magisk using magisk uninstaller, it gives an error that I need to mount the system. With TWRP, I can not do this. The section is, well, you can not mount. I need your help, please skip the Boot section from the global version, it may still be possible to start the system.

3gpaBcTByuTe said:
Hello guys. I installed TWRP, well, when I tried to put Magisk, something went wrong, and now I can not log in to the system, the boot sign in the system constantly hangs. I can not delete Magisk using magisk uninstaller, it gives an error that I need to mount the system. With TWRP, I can not do this. The section is, well, you can not mount. I need your help, please skip the Boot section from the global version, it may still be possible to start the system.
Click to expand...
Click to collapse
I think you should:
- wipe data
- install Magisk
- boot into original recovery
- wipe data again from there
- reboot
And you should be able to boot!

loriz said:
I think you should:
- wipe data
- install Magisk
- boot into original recovery
- wipe data again from there
- reboot
And you should be able to boot!
Click to expand...
Click to collapse
Thanks for the answer, well the fact that I do not have the original boot.img (I made a backup system when I already rewrote the original boot(
If you have the opportunity, throw off please original boot.img from global version. I will be very grateful and grateful!

3gpaBcTByuTe said:
Thanks for the answer, well the fact that I do not have the original boot.img (I made a backup system when I already rewrote the original boot(
If you have the opportunity, throw off please original boot.img from global version. I will be very grateful and grateful!
Click to expand...
Click to collapse
If needed i can explain on how to extract the stock boot.img, i have not the black shark so i can't do it by me

mauronofrio said:
If needed i can explain on how to extract the stock boot.img, i have not the black shark so i can't do it by me
Click to expand...
Click to collapse
Write a way to do this. I would be very grateful, there may be people who will want to help me, and I’ll draw out the original boot.img. Maybe I'm not the first, and not the last who will face this situation, and already it will be for all the same as I have an airbag.

3gpaBcTByuTe said:
Hello guys. I installed TWRP, well, when I tried to put Magisk, something went wrong, and now I can not log in to the system, the boot sign in the system constantly hangs. I can not delete Magisk using magisk uninstaller, it gives an error that I need to mount the system. With TWRP, I can not do this. The section is, well, you can not mount. I need your help, please skip the Boot section from the global version, it may still be possible to start the system.
Click to expand...
Click to collapse
i sent you mssg

They threw me the original boot.img from the December update, well, this did not save the system. Permanent reboot of the phone goes on the letter "S". What could be the reason?
http://transfiles.ru/qqpem

thanks for your work . how can i decript???
i´ll wait for the next update thanks!!!!

mauronofrio said:
If needed i can explain on how to extract the stock boot.img, i have not the black shark so i can't do it by me
Click to expand...
Click to collapse
Can you please explain how to extract the stock boot.img? Nice work btw!

After flash magisk I hung up the logo, what should I do now

kanded said:
i sent you mssg
Click to expand...
Click to collapse
Thank you very much Brother !!! You really helped me a lot !!! There would be more people like you in our world, and in this community !!!

3gpaBcTByuTe said:
Thank you very much Brother !!! You really helped me a lot !!! There would be more people like you in our world, and in this community !!!
Click to expand...
Click to collapse
To extract the stock boot, you should boot the twrp and from the pc using adb run these commands (remember if you have already rooted or if you flashed the twrp installer, you have no more the stock boot on your deivce:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/boot of=/boot.img
adb pull /boot.img <pcpath>
For example in my case to copy it on desktop:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/boot of=/boot.img
adb pull /boot.img D:\Desktop