hey guys need help i was multi booting with g3mod kernel 2.0 & switched to cm7 but my g3 stucks at bootanimation then plz tell me how to use multi boot with cm7 & froyo roms?
pvg777 said:
hey guys need help i was multi booting with g3mod kernel 2.0 & switched to cm7 but my g3 stucks at bootanimation then plz tell me how to use multi boot with cm7 & froyo roms?
Click to expand...
Click to collapse
try g3mod 2.0 b3....it's pretty good ...i checked it for multiboot...
Install cm7 and apply update1.zip and install g3mod 2.0 b3 ...then go to recovery and backup your cm7 ...then put any froyo rom IMG in another folder of /sdcard/g3mod/roms/romname/
then try swithing between roms it'll work definitely......Worked for me....
pvg777 said:
hey guys need help i was multi booting with g3mod kernel 2.0 & switched to cm7 but my g3 stucks at bootanimation then plz tell me how to use multi boot with cm7 & froyo roms?
Click to expand...
Click to collapse
if you switch from froyo to Cm7...wipe data/factory reset in cwm....and then you restore
cm7 data...if you have backup of it...that works
ps: i hit thanks accidentaly
Sent from my hybrid sg3
Kyorarom Infinity b2 powered by
g3mod 2.1 b2 OC
Multiboot froyo+Kryllios
rkoby13 said:
if you switch from froyo to Cm7...wipe data/factory reset in cwm....and then you restore
cm7 data...if you have backup of it...that works
ps: i hit thanks accidentaly
Sent from my hybrid sg3
Kyorarom Infinity b2 powered by
g3mod 2.1 b2 OC
Click to expand...
Click to collapse
Will I need to wipe data to multiboot between Stock Froyo and Kryllios?
kevinlane said:
Will I need to wipe data to multiboot between Stock Froyo and Kryllios?
Click to expand...
Click to collapse
no..not at all
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Does anybody know what happens to the link2sd script when installing the new G3MOD 2.4.1 kernel on CM7 A7?
Link2sd always reports that it could not mount the 2nd partition and recreates the mount script.
After flashing back the CM7 1.2 kernel link2sd works fine again.
Is there something I could do to get link2sd running on G3MOD 2.4.1?
use hd2sd...it works flawlesly...
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
G3mod 2.4.1 OC
~~~~~~~~~~~~~~~~~~~~~~~~~
rkoby13 said:
use hd2sd...it works flawlesly...
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
G3mod 2.4.1 OC
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
I'm afraid that HybridData2SD is no alternative for link2sd. I do not want to move all my apps to the SD as it is much slower than the internal memory. So want to have most of the important apps in internal memory and the others on the SD.
Link2sd did a great job to achieve this, but it does not work on G3mod 2.4.1 anymore.
Does anybody know why?
How did u get hd2sd to work
after enabling hd2sd when i try to install an app eg Titanium my phone just reboots
oseienoch said:
after enabling hd2sd when i try to install an app eg Titanium my phone just reboots
Click to expand...
Click to collapse
wipe data in cwm
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
One more thing, how do you partion sdcard in stock cm1.3 hv kernel on kyrillos v10 beta 2
Partitioning should work within CWM.
By the way: This is not the Thread to ask such questions.
It's about link2sd. Is nobody able to answer my question why it's not working anymore with G3mod 2.4.1 and CM7 A7?
Sent from my GT-I5800 using XDA App
Hello guys,
This is my first time on the forum, so I hope I'm not going to break any rules without knowing it.
I'm looking for a very stable kernel, but I have a hard time finding one that suits my needs mainly because of my lack of knowledge. I have flashed a few ROM's most of wich were different versions of Kyrillos Froyo ROM's. They came with the G3Mod OC kernel wich worked pretty well overall. Two problems were really bugging me though.
When I pushed the back or home button sometimes my phone would instantly freeze and the only thing left to do was a battery pull, or a long press on the power button.
Second problem was what some refer to as black screen of death, i believe. The phone would'nt wake-up after the screen had been turnt off.
I found that changing the voltages in SetCPU, like Kyrillos says in his FAQ, didn't help. So after a while I flashed the NON-OC ROM and that did a perfect job!
Now I've flashed the ICS Rom build 4 update 1 and it works perfect for me (performance wise, offcourse it still has alot of bugs). The only problem is, again, the freezing and the (not) waking issue. I tried to flash a G3Mod NON-OC kernel, but then the phone doesn't boot at all. When I tried to flash Arakmar's kernel (even tough that is still an OC-Kernel) from the ICS post, the colors seemed inverted or something.
To get back to the question: Is there a NON-OC Kernel that can run ICS? Or is there maybe a solution to get an OC-Kernel working on my phone?
I hope you guys can help me with this.
And I hope I have made a clear post. (since English isn't my primary language)
Cheers.
Wiggierip said:
Hello guys,
This is my first time on the forum, so I hope I'm not going to break any rules without knowing it.
I'm looking for a very stable kernel, but I have a hard time finding one that suits my needs mainly because of my lack of knowledge. I have flashed a few ROM's most of wich were different versions of Kyrillos Froyo ROM's. They came with the G3Mod OC kernel wich worked pretty well overall. Two problems were really bugging me though.
When I pushed the back or home button sometimes my phone would instantly freeze and the only thing left to do was a battery pull, or a long press on the power button.
Second problem was what some refer to as black screen of death, i believe. The phone would'nt wake-up after the screen had been turnt off.
I found that changing the voltages in SetCPU, like Kyrillos says in his FAQ, didn't help. So after a while I flashed the NON-OC ROM and that did a perfect job!
Now I've flashed the ICS Rom build 4 update 1 and it works perfect for me (performance wise, offcourse it still has alot of bugs). The only problem is, again, the freezing and the (not) waking issue. I tried to flash a G3Mod NON-OC kernel, but then the phone doesn't boot at all. When I tried to flash Arakmar's kernel (even tough that is still an OC-Kernel) from the ICS post, the colors seemed inverted or something.
To get back to the question: Is there a NON-OC Kernel that can run ICS? Or is there maybe a solution to get an OC-Kernel working on my phone?
I hope you guys can help me with this.
And I hope I have made a clear post. (since English isn't my primary language)
Cheers.
Click to expand...
Click to collapse
Well, arakmar posted an fix in the ics forum. It was something with the samsung gralloc.
MIUIforG3 said:
Well, arakmar posted an fix in the ics forum. It was something with the samsung gralloc.
Click to expand...
Click to collapse
Do you mean the ics24.zip? Thats the one I tried when it gave me the color bug...
even if a kernel supports OC you don't need to push your phone if it can't take it, try setcpu to put the clock to stock values
Astrum Kernel works quite well but it's still quite buggy. Try Astrum Blackhole when it is released.
tomsi191 said:
even if a kernel supports OC you don't need to push your phone if it can't take it, try setcpu to put the clock to stock values
Click to expand...
Click to collapse
Forgot to mention that I already tried that, thats the weird thing about it. The problem was still there.
Welkom!
If you use a froyo ROM i would recommend the fugumod ultra kernel, that one is as stable as hell!
Wiggierip said:
Forgot to mention that I already tried that, thats the weird thing about it. The problem was still there.
Click to expand...
Click to collapse
what were the advanced settings you used?
Sent from my GT-I5800 using XDA
Is there any solution to fix video capture in CM7 or Kyrillos v10???
strugalovic88 said:
Is there any solution to fix video capture in CM7 or Kyrillos v10???
Click to expand...
Click to collapse
VideoCamIllusion app can record a video for u on cm7a7 base...
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Originally Posted by Wiggierip
Forgot to mention that I already tried that, thats the weird thing about it. The problem was still there.
Click to expand...
Click to collapse
what were the advanced settings you used?
Sent from my GT-I5800 using XDA
Click to expand...
Click to collapse
Didn't change anything except for the up-treshold but that didn't seem to make a difference.
Wiggierip said:
Didn't change anything except for the up-treshold but that didn't seem to make a difference.
Click to expand...
Click to collapse
u could try g3mod 2.4.1...non-oc...moikop said that it "should" support ics build....but no one tested it before....maybe u should give it a try
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
rkoby13 said:
u could try g3mod 2.4.1...non-oc...moikop said that it "should" support ics build....but no one tested it before....maybe u should give it a try
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Tried that, as I mentioned in the first post. The phone froze on the kernel splash screen :/ (thats called a bootloop right?). I think that kernel could solve my problem if I could get it to work with ICS and it doesn't have the same color bug as Arakmar ics24.zip kernel I tried before.
Wiggierip said:
Tried that, as I mentioned in the first post. The phone froze on the kernel splash screen :/ (thats called a bootloop right?). I think that kernel could solve my problem if I could get it to work with ICS and it doesn't have the same color bug as Arakmar ics24.zip kernel I tried before.
Click to expand...
Click to collapse
nope...if u're stuck at g3mog logo that's not bootloop
btw: did you wipe dalvik & cache?
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
rkoby13 said:
nope...if u're stuck at g3mog logo that's not bootloop
btw: did you wipe dalvik & cache?
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Is wiping dalvik&cache included in factory reset? Thats what I did.
Wiggierip said:
Is wiping dalvik&cache included in factory reset? Thats what I did.
Click to expand...
Click to collapse
no....u have to wipe dalvik manualy from cwm
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Tried it
I finally took the time to try flashing the G3Mod kernel while wiping data, cache and Dalvik-cache but it didn't help. Still stuck at the kernel screen
Any more suggestions on how to get this to work?
Wiggierip said:
I finally took the time to try flashing the G3Mod kernel while wiping data, cache and Dalvik-cache but it didn't help. Still stuck at the kernel screen
Any more suggestions on how to get this to work?
Click to expand...
Click to collapse
That doesn't make sense ... try reflashing the rom, wipe dat, cache and dalvik cache, flash kernel. Its so weird, your phone should have booted...
Cheers
Sent from my GT-i9003 powered by MIUI
bscraze said:
That doesn't make sense ... try reflashing the rom, wipe dat, cache and dalvik cache, flash kernel. Its so weird, your phone should have booted...
Cheers
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
My phone likes to be different I guess
There is something else though: when I try to wipe Dalvik-cache just after flashing ICS he doesn't give me the menu where I should comfirm if I want to wipe Dalvik, he just sits there and does nothing, when I push it several times the phone reboots. After I flash the G3Mod kernel and try to wipe the Dalvik-cache it says: "E: Can't mount /dev/block/stl7 (File exists)"
Does this matter or is this something to be ignored?
Wiggierip said:
My phone likes to be different I guess
There is something else though: when I try to wipe Dalvik-cache just after flashing ICS he doesn't give me the menu where I should comfirm if I want to wipe Dalvik, he just sits there and does nothing, when I push it several times the phone reboots. After I flash the G3Mod kernel and try to wipe the Dalvik-cache it says: "E: Can't mount /dev/block/stl7 (File exists)"
Does this matter or is this something to be ignored?
Click to expand...
Click to collapse
I'm not sure, only if problems arises then I will think of it as a problem . I believe I used to have this message but I ignored it
Cheers
Sent from my GT-i9003 powered by MIUI
Is there, clockworkmod recovery for stock froyo firmware for our G3 !
sid_rangra said:
Is there, clockworkmod recovery for stock froyo firmware for our G3 !
Click to expand...
Click to collapse
you just don't give up, eh?
and no there's no such thing u mentioned above unless if you flash custom kernel
any other question please?
i like questions
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
lol...!!
actually the thing is...i want to increase my internal memory using 'ungaze script' ..for which i have to make a partition using recovery...
for that i want clockworkmod recovery...being on the stock firmware .. can you help on that.
well....it's easier method to use pc & minitool partition wizard( it's free)
..or u can try to flash g3mod kernel on your stock rom with odin...via download mode....i think you must be rooted too...
btw on which stock rom are you afterall?
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Please.. search!!! Dont crowd the threads!
Hi there, I've not really been able to find any super-clear information about what the Multi-OS Data kernel option does. I'm wondering whether I can use it to multiboot CM7 and ICS AOKP - I have both working nicely on my phone with the multiboot and the ics26 kernel by Arakmar.
I know that the data will not be compatible between the two, so my real question is does MultiOSData allow for two separate sets of OS data, or does it share one set between two ROMs? If so, I'm guessing that it's not for me!
well...u can try..it should work...i'm able to multiboot betwen my rom, kyrillos v10 & cm7a7..with multiosdata on....
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus' Rom v 1.0
powered by
Team G3mod-ICS26 kernel by Arakmar
~~~~~~~~~~~~~~~~~~~~~~~~~
Yes, but they're both CM7 (Gingerbread) ROMs, whereas I'm talking about one Gingerbread ROM and one ICS ROM - and I don't think they store data in the same way. So if the data is shared it won't work, whereas if it's just backed up for each ROM, then it will!
davepwsmith said:
Yes, but they're both CM7 (Gingerbread) ROMs, whereas I'm talking about one Gingerbread ROM and one ICS ROM - and I don't think they store data in the same way. So if the data is shared it won't work, whereas if it's just backed up for each ROM, then it will!
Click to expand...
Click to collapse
basically it should work..coz multiosdata is created when you switch rom in cwm...so...that means...if you switch frim.cm7 to cm9/aokp...you'll lose system data...but when you'll backup cm9/aokp rom under multiboot (after you make ur desired settings)...then you'll have ur data back when you'll switch back again...but again...i didn't test out this...but it should work fine
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus' Rom v 1.0
powered by
Team G3mod-ICS26 kernel by Arakmar
~~~~~~~~~~~~~~~~~~~~~~~~~