Hello guys,
This is my first time on the forum, so I hope I'm not going to break any rules without knowing it.
I'm looking for a very stable kernel, but I have a hard time finding one that suits my needs mainly because of my lack of knowledge. I have flashed a few ROM's most of wich were different versions of Kyrillos Froyo ROM's. They came with the G3Mod OC kernel wich worked pretty well overall. Two problems were really bugging me though.
When I pushed the back or home button sometimes my phone would instantly freeze and the only thing left to do was a battery pull, or a long press on the power button.
Second problem was what some refer to as black screen of death, i believe. The phone would'nt wake-up after the screen had been turnt off.
I found that changing the voltages in SetCPU, like Kyrillos says in his FAQ, didn't help. So after a while I flashed the NON-OC ROM and that did a perfect job!
Now I've flashed the ICS Rom build 4 update 1 and it works perfect for me (performance wise, offcourse it still has alot of bugs). The only problem is, again, the freezing and the (not) waking issue. I tried to flash a G3Mod NON-OC kernel, but then the phone doesn't boot at all. When I tried to flash Arakmar's kernel (even tough that is still an OC-Kernel) from the ICS post, the colors seemed inverted or something.
To get back to the question: Is there a NON-OC Kernel that can run ICS? Or is there maybe a solution to get an OC-Kernel working on my phone?
I hope you guys can help me with this.
And I hope I have made a clear post. (since English isn't my primary language)
Cheers.
Wiggierip said:
Hello guys,
This is my first time on the forum, so I hope I'm not going to break any rules without knowing it.
I'm looking for a very stable kernel, but I have a hard time finding one that suits my needs mainly because of my lack of knowledge. I have flashed a few ROM's most of wich were different versions of Kyrillos Froyo ROM's. They came with the G3Mod OC kernel wich worked pretty well overall. Two problems were really bugging me though.
When I pushed the back or home button sometimes my phone would instantly freeze and the only thing left to do was a battery pull, or a long press on the power button.
Second problem was what some refer to as black screen of death, i believe. The phone would'nt wake-up after the screen had been turnt off.
I found that changing the voltages in SetCPU, like Kyrillos says in his FAQ, didn't help. So after a while I flashed the NON-OC ROM and that did a perfect job!
Now I've flashed the ICS Rom build 4 update 1 and it works perfect for me (performance wise, offcourse it still has alot of bugs). The only problem is, again, the freezing and the (not) waking issue. I tried to flash a G3Mod NON-OC kernel, but then the phone doesn't boot at all. When I tried to flash Arakmar's kernel (even tough that is still an OC-Kernel) from the ICS post, the colors seemed inverted or something.
To get back to the question: Is there a NON-OC Kernel that can run ICS? Or is there maybe a solution to get an OC-Kernel working on my phone?
I hope you guys can help me with this.
And I hope I have made a clear post. (since English isn't my primary language)
Cheers.
Click to expand...
Click to collapse
Well, arakmar posted an fix in the ics forum. It was something with the samsung gralloc.
MIUIforG3 said:
Well, arakmar posted an fix in the ics forum. It was something with the samsung gralloc.
Click to expand...
Click to collapse
Do you mean the ics24.zip? Thats the one I tried when it gave me the color bug...
even if a kernel supports OC you don't need to push your phone if it can't take it, try setcpu to put the clock to stock values
Astrum Kernel works quite well but it's still quite buggy. Try Astrum Blackhole when it is released.
tomsi191 said:
even if a kernel supports OC you don't need to push your phone if it can't take it, try setcpu to put the clock to stock values
Click to expand...
Click to collapse
Forgot to mention that I already tried that, thats the weird thing about it. The problem was still there.
Welkom!
If you use a froyo ROM i would recommend the fugumod ultra kernel, that one is as stable as hell!
Wiggierip said:
Forgot to mention that I already tried that, thats the weird thing about it. The problem was still there.
Click to expand...
Click to collapse
what were the advanced settings you used?
Sent from my GT-I5800 using XDA
Is there any solution to fix video capture in CM7 or Kyrillos v10???
strugalovic88 said:
Is there any solution to fix video capture in CM7 or Kyrillos v10???
Click to expand...
Click to collapse
VideoCamIllusion app can record a video for u on cm7a7 base...
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Originally Posted by Wiggierip
Forgot to mention that I already tried that, thats the weird thing about it. The problem was still there.
Click to expand...
Click to collapse
what were the advanced settings you used?
Sent from my GT-I5800 using XDA
Click to expand...
Click to collapse
Didn't change anything except for the up-treshold but that didn't seem to make a difference.
Wiggierip said:
Didn't change anything except for the up-treshold but that didn't seem to make a difference.
Click to expand...
Click to collapse
u could try g3mod 2.4.1...non-oc...moikop said that it "should" support ics build....but no one tested it before....maybe u should give it a try
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
rkoby13 said:
u could try g3mod 2.4.1...non-oc...moikop said that it "should" support ics build....but no one tested it before....maybe u should give it a try
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Tried that, as I mentioned in the first post. The phone froze on the kernel splash screen :/ (thats called a bootloop right?). I think that kernel could solve my problem if I could get it to work with ICS and it doesn't have the same color bug as Arakmar ics24.zip kernel I tried before.
Wiggierip said:
Tried that, as I mentioned in the first post. The phone froze on the kernel splash screen :/ (thats called a bootloop right?). I think that kernel could solve my problem if I could get it to work with ICS and it doesn't have the same color bug as Arakmar ics24.zip kernel I tried before.
Click to expand...
Click to collapse
nope...if u're stuck at g3mog logo that's not bootloop
btw: did you wipe dalvik & cache?
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
rkoby13 said:
nope...if u're stuck at g3mog logo that's not bootloop
btw: did you wipe dalvik & cache?
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Is wiping dalvik&cache included in factory reset? Thats what I did.
Wiggierip said:
Is wiping dalvik&cache included in factory reset? Thats what I did.
Click to expand...
Click to collapse
no....u have to wipe dalvik manualy from cwm
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Tried it
I finally took the time to try flashing the G3Mod kernel while wiping data, cache and Dalvik-cache but it didn't help. Still stuck at the kernel screen
Any more suggestions on how to get this to work?
Wiggierip said:
I finally took the time to try flashing the G3Mod kernel while wiping data, cache and Dalvik-cache but it didn't help. Still stuck at the kernel screen
Any more suggestions on how to get this to work?
Click to expand...
Click to collapse
That doesn't make sense ... try reflashing the rom, wipe dat, cache and dalvik cache, flash kernel. Its so weird, your phone should have booted...
Cheers
Sent from my GT-i9003 powered by MIUI
bscraze said:
That doesn't make sense ... try reflashing the rom, wipe dat, cache and dalvik cache, flash kernel. Its so weird, your phone should have booted...
Cheers
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
My phone likes to be different I guess
There is something else though: when I try to wipe Dalvik-cache just after flashing ICS he doesn't give me the menu where I should comfirm if I want to wipe Dalvik, he just sits there and does nothing, when I push it several times the phone reboots. After I flash the G3Mod kernel and try to wipe the Dalvik-cache it says: "E: Can't mount /dev/block/stl7 (File exists)"
Does this matter or is this something to be ignored?
Wiggierip said:
My phone likes to be different I guess
There is something else though: when I try to wipe Dalvik-cache just after flashing ICS he doesn't give me the menu where I should comfirm if I want to wipe Dalvik, he just sits there and does nothing, when I push it several times the phone reboots. After I flash the G3Mod kernel and try to wipe the Dalvik-cache it says: "E: Can't mount /dev/block/stl7 (File exists)"
Does this matter or is this something to be ignored?
Click to expand...
Click to collapse
I'm not sure, only if problems arises then I will think of it as a problem . I believe I used to have this message but I ignored it
Cheers
Sent from my GT-i9003 powered by MIUI
Related
hey guys need help i was multi booting with g3mod kernel 2.0 & switched to cm7 but my g3 stucks at bootanimation then plz tell me how to use multi boot with cm7 & froyo roms?
pvg777 said:
hey guys need help i was multi booting with g3mod kernel 2.0 & switched to cm7 but my g3 stucks at bootanimation then plz tell me how to use multi boot with cm7 & froyo roms?
Click to expand...
Click to collapse
try g3mod 2.0 b3....it's pretty good ...i checked it for multiboot...
Install cm7 and apply update1.zip and install g3mod 2.0 b3 ...then go to recovery and backup your cm7 ...then put any froyo rom IMG in another folder of /sdcard/g3mod/roms/romname/
then try swithing between roms it'll work definitely......Worked for me....
pvg777 said:
hey guys need help i was multi booting with g3mod kernel 2.0 & switched to cm7 but my g3 stucks at bootanimation then plz tell me how to use multi boot with cm7 & froyo roms?
Click to expand...
Click to collapse
if you switch from froyo to Cm7...wipe data/factory reset in cwm....and then you restore
cm7 data...if you have backup of it...that works
ps: i hit thanks accidentaly
Sent from my hybrid sg3
Kyorarom Infinity b2 powered by
g3mod 2.1 b2 OC
Multiboot froyo+Kryllios
rkoby13 said:
if you switch from froyo to Cm7...wipe data/factory reset in cwm....and then you restore
cm7 data...if you have backup of it...that works
ps: i hit thanks accidentaly
Sent from my hybrid sg3
Kyorarom Infinity b2 powered by
g3mod 2.1 b2 OC
Click to expand...
Click to collapse
Will I need to wipe data to multiboot between Stock Froyo and Kryllios?
kevinlane said:
Will I need to wipe data to multiboot between Stock Froyo and Kryllios?
Click to expand...
Click to collapse
no..not at all
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
Does anybody know what happens to the link2sd script when installing the new G3MOD 2.4.1 kernel on CM7 A7?
Link2sd always reports that it could not mount the 2nd partition and recreates the mount script.
After flashing back the CM7 1.2 kernel link2sd works fine again.
Is there something I could do to get link2sd running on G3MOD 2.4.1?
use hd2sd...it works flawlesly...
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
G3mod 2.4.1 OC
~~~~~~~~~~~~~~~~~~~~~~~~~
rkoby13 said:
use hd2sd...it works flawlesly...
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
G3mod 2.4.1 OC
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
I'm afraid that HybridData2SD is no alternative for link2sd. I do not want to move all my apps to the SD as it is much slower than the internal memory. So want to have most of the important apps in internal memory and the others on the SD.
Link2sd did a great job to achieve this, but it does not work on G3mod 2.4.1 anymore.
Does anybody know why?
How did u get hd2sd to work
after enabling hd2sd when i try to install an app eg Titanium my phone just reboots
oseienoch said:
after enabling hd2sd when i try to install an app eg Titanium my phone just reboots
Click to expand...
Click to collapse
wipe data in cwm
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
One more thing, how do you partion sdcard in stock cm1.3 hv kernel on kyrillos v10 beta 2
Partitioning should work within CWM.
By the way: This is not the Thread to ask such questions.
It's about link2sd. Is nobody able to answer my question why it's not working anymore with G3mod 2.4.1 and CM7 A7?
Sent from my GT-I5800 using XDA App
I have installed Kyrillos rom 9.0 incl non.oc Kernel with odin and updated later to 9.5. Hybrid Data2SD works fine.
Can I simply CWM update with G3MOD_2.4.1_OC.zip ?
I cant find a tutorial for that.
I only found a hint to "wipe Dalvik Cache" after reboot recovery. Is that ok? Is Kyrillos 9.5 and g3mod 2.4.1 compatible? Some users only use Kyrillos 9.4 with 2.4.1...
Thanks, Thomas
i5800, fw 2.2, Kyrillos 9.5 JPU
Should be no problem. If you have doubts you can make a complete backup in cwm.
Sent from my GT-I5800 using XDA
misc030 said:
I have installed Kyrillos rom 9.0 incl non.oc Kernel with odin and updated later to 9.5. Hybrid Data2SD works fine.
Can I simply CWM update with G3MOD_2.4.1_OC.zip ?
I cant find a tutorial for that.
I only found a hint to "wipe Dalvik Cache" after reboot recovery. Is that ok? Is Kyrillos 9.5 and g3mod 2.4.1 compatible? Some users only use Kyrillos 9.4 with 2.4.1...
Thanks, Thomas
i5800, fw 2.2, Kyrillos 9.5 JPU, g3mod 2.6.32.9 non-oc
Click to expand...
Click to collapse
you could ask in Q/A thread instead of opening new one
anyway....yes...
mate, you can flash it without any fears over 9.5...
click here
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
thanks.. it works fine now!
with G3 kernels you have CWM
Just a hint for kernel updates:
always have a directory with your actual (working) kernel on sd
if new kernel resides in bootloops or whatever, just boot into CWM and install your old (working) kernel
Normally a kernel update/downgrade doesnt require any backup, but youll never know.
always have a backup available (also on PC! -> SD card may crash!)
If you experience any recurrent problems with a new kernel, just downgrade easily to your older kernel via CWM.
Cheers
qaysed
Hi all.I tried many times and test the owerclock ,i am using setcpu.But i see no difrenc,phone is alway the same,playing games is the same on 677mhz as 1200,and between,watching pictures also the same,i see no diference,what is the problem,i need some bust for games,how to get this.Phone working fine but no diference.
What kernel do you use?
Setcpu doesnt work on stock the samsung rom...u need a custom rom........
Sent from my GT-I5800 using xda premium
Hellhound7 said:
Setcpu doesnt work on stock the samsung rom...u need a custom rom........
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
nah...setcpu works just fine on stock rom with stock kernel..only thing is ....u have to be rooted
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus' Rom v 1.0
powered by
Team G3mod-ICS26 kernel by Arakmar
~~~~~~~~~~~~~~~~~~~~~~~~~
rkoby13 said:
nah...setcpu works just fine on stock rom with stock kernel..only thing is ....u have to be rooted
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus' Rom v 1.0
powered by
Team G3mod-ICS26 kernel by Arakmar
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
It works on stock kernel when rooted only, thats right, but you can't overclock past 667 Mhz is what Hellhound means I think. You can set it to whatever you like if you dont use the autodetection though, but that is only visual, the actual clock doesn't go past 667 Mhz on stock.
I use:kyrillos rom 9.3 with kernel g3mod 2.2.2 OC 2.4.1oc.and doutch rom 5,2 with same kernel g3mod 2.2.2OC and 2.4.1OC.I tried even with NONoc,no difrence,on every custom ROM i see lag,going true menu,is just not smood inaf
I assume that you have moved your dalvik cache to external sd
move it back to internal and have fun
Please check the ./data2sd.log, if I am on the right side or may assumption is wrong.
-> paste the content of that file here and I know more
lagging is not a symptom of slow CPU, moreover of a slow sd card
cheers
qaysed
I did not move anithing to sd,it is just usual flashing ROM.i even remove sd,and it is the same.ex:game is instaled on phone not on sd,but intire menu is laging,phone works,sims to be fine,but... I open new tread "problems problems problems".but is closed and i d not andstend message writen there.i Have problems in cwm,only able to flash with ODin,flashing in cwm give me problems,error messages:E:Cant't mount/dev/block/mmcblkop2(file exists)
E:can't chown/mod/data/app(no such file or directory)
E:Failure at line 57:set_perm 1000 1000 0771 DATA:app Installation aborted
SoLoSaroman said:
I did not move anithing to sd,it is just usual flashing ROM.i even remove sd,and it is the same.ex:game is instaled on phone not on sd,but intire menu is laging,phone works,sims to be fine,but... I open new tread "problems problems problems".but is closed and i d not andstend message writen there.i Have problems in cwm,only able to flash with ODin,flashing in cwm give me problems,error messages:E:Cant't mount/dev/block/mmcblkop2(file exists)
E:can't chown/mod/data/app(no such file or directory)
E:Failure at line 57:set_perm 1000 1000 0771 DATA:app Installation aborted
Click to expand...
Click to collapse
The Mod moved your "problems problem problems" post to the proper thread:
http://forum.xda-developers.com/showthread.php?t=1058071&page=251
its over there now, and someone allready send a reply! Check it out, maybe it solves your problem.
Wiggierip said:
It works on stock kernel when rooted only, thats right, but you can't overclock past 667 Mhz is what Hellhound means I think. You can set it to whatever you like if you dont use the autodetection though, but that is only visual, the actual clock doesn't go past 667 Mhz on stock.
Click to expand...
Click to collapse
Yes...dats what i ment...lol....you can underclock but cant overclock past 667 mhz...
Sent from my GT-I5800 using xda premium
Hi everyone, please be patients because of my bad english..
Trying to flash Fugumod pre release kernel my phone bricked...when I push power button it appears the GT-I5800 screen and doesn't happen nothing else... My latest firmware was Kyrillos 10.6..
I don't know if it's a positive thing that when phone is off, the battery charge
What can i do? I'm trying to flash G3mod kernel or entire Kyrillos firmware but doesnt work..
Thanks to everyone want to help me :good:
dshad14 said:
Hi everyone, please be patients because of my bad english..
Trying to flash Fugumod pre release kernel my phone bricked...when I push power button it appears the GT-I5800 screen and doesn't happen nothing else... My latest firmware was Kyrillos 10.6..
I don't know if it's a positive thing that when phone is off, the battery charge
What can i do? I'm trying to flash G3mod kernel or entire Kyrillos firmware but doesnt work..
Thanks to everyone want to help me :good:
Click to expand...
Click to collapse
Go into download mode and flash a froyo ROM. The fugumod kernel is not for android 2.3 ROMs that's why your phone went mental
MicroGeek said:
Go into download mode and flash a froyo ROM. The fugumod kernel is not for android 2.3 ROMs that's why your phone went mental
Click to expand...
Click to collapse
Thank you MicroGeek! I've flashed successfully a stock firmware (2.2)...but I've two simple question,..
1) There is a guide (in an italian forum) that combines Kyrillos ROM + "Fugumod Ultra Pre Release" kernel..how is it possible? (obviously till I flash only the rom it goes all ok)
2) May you suggest me a kernel to combine with Kyrillos rom? I'm searching a kernel that improves battery performance
Thanks a lot guy! :good:
@up on that forum is probably a guide to combine Kyrillos froyo rom(he has a froyo and cm7 rom) with fugumod ultra...
2) I am using my own rom with fugumod ultra 1366 Mhz and my battery lasts 2 days with average usage and 1 day with heavy usage. CPU is set to 780 Max - 156 Min with conservative governor.And the performance is amazing.
If you don't like ultra version try standard,the performance will not be that good but battery will last longer.
Click thanks if i helped.
artifex21 said:
@up on that forum is probably a guide to combine Kyrillos froyo rom(he has a froyo and cm7 rom) with fugumod ultra...
2) I am using my own rom with fugumod ultra 1366 Mhz and my battery lasts 2 days with average usage and 1 day with heavy usage. CPU is set to 780 Max - 156 Min with conservative governor.And the performance is amazing.
If you don't like ultra version try standard,the performance will not be that good but battery will last longer.
Click thanks if i helped.
Click to expand...
Click to collapse
Kyrillos 10.6 is not froyo-based... (2.3.7)
However my problem now is that i cannot flash nothing except the latest stock firmware (it's the only firmware that let me wake up successfully the phone)... i tried several times to flash Kyrillos but the phone remain in the GT-I5800 splash screen..I don't understand why this happens
Did you try flashing a custom froyo rom ? If you did and it doesn't boot try to flash Zerofill.tar(i think you can find the download link in rkoby's mediafire folder) and then try to flash cm7 or something else you want...
Click thanks if i helped
artifex21 said:
Did you try flashing a custom froyo rom ? If you did and it doesn't boot try to flash Zerofill.tar(i think you can find the download link in rkoby's mediafire folder) and then try to flash cm7 or something else you want...
Click thanks if i helped
Click to expand...
Click to collapse
I flashed PuruKisadHYBRID ROM (froyo)...the phone after reboot remain in a splash screen
(I cannot insert image) imageshack(dot)us/scaled/landing/805/14122012772(dot)jpg
Instead, after flashing "G3Mod" kernel for froyo, PuruKisadHYBRID ROM booted correctly :good: