so my optimus is bricked and you can see what i mean in the link, i bought this phone for $20 from a friend who knows nothing about root but as curious as he was he attempted to and failed, i have no idea what he did but now everytime i boot it up it goes to "updating firmware" and automatically reboots. i tried to .kdz files V10S.00 and V10L.00 but when its done flashing it goes back into the same loop, any idea how to fix this??http://www.youtube.com/watch?v=zszfr1c9thU&context=C33507b0ADOEgsToPDskJ3IhQR_m7e5CrtQEpYPbS9
Boot up in emergency mode ('back button' + 'volume up' + 'power button'), then flash KDZ selecting EMERGENCY instead of DIAG.
Then, after it finishes, you will have your phone turned off (just charging through USB). At this point your first boot should be doing a factory reset ('home button' + 'volume down' + 'power button') to make sure there's no bad data from another time (this, of course, will wipe all the data on the phone).
----------edit----------
If it's of your interest to keep all the data on the phone intact, don't do this. (I mean messages, call log, settings, apps, etc - the SD card won't be affected by the procedure described above).
thats exactly what i did but when it reboots in the process it does that loop
Wow! It can't even boot to the offline charging mode?
No
Sent from my SGH-T959 using XDA Premium App
The 'factory reset' ends up in the same boot loop? Just to be sure.
whats that? and now i get this error
[19:10:47:862] : =============================================
[19:10:47:862] : Log is started on 06.03.2012, at 19:10:47:862,
executable: C:\Users\Diego Diazbarriga\Desktop\Stock-Factory-Optimus_T_Flash (2)\KDZ_FW_UPD.exe (ProcID: 0x00000cc8),
compile time : Sep 13 2010 11:34:51
[19:10:47:862] : Version :
[19:10:47:878] : Get Usb Port
[19:10:47:878] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM4)
[19:10:47:878] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[19:10:47:878] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM4
[19:10:47:878] : Port = COM4
[19:10:47:893] : UNKNOWN : Req(12) -> Rsp(13)
[19:10:47:909] : UNKNOWN : Req(12) -> Rsp(13)
[19:10:47:924] : UNKNOWN : Req(12) -> Rsp(13)
[19:10:47:924] : >> DIAG_STATUS_F FAILED
[19:10:47:940] : >>Get Model Name [DIAG_VERNO_F]
[19:10:47:956] : BAD CONN MODE : Req(0) -> Rsp(3)
[19:10:47:971] : BAD CONN MODE : Req(0) -> Rsp(3)
[19:10:47:987] : BAD CONN MODE : Req(0) -> Rsp(3)
[19:10:48:002] : BAD CONN MODE : Req(0) -> Rsp(3)
[19:10:48:018] : BAD CONN MODE : Req(0) -> Rsp(3)
[19:10:48:034] : BAD CONN MODE : Req(0) -> Rsp(3)
[19:10:48:034] : FAIL (No Phone)
[19:10:48:034] : GetModelName() Operation Failed Check Diag CMD
[19:10:48:034] : EMERGENCY Booting Mode
[19:10:48:034] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[19:10:48:049] : BS/P509/7DIEGOD~1\AppData\Local\Temp\DZ
[19:10:48:049] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P509
[19:10:48:065] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[19:10:48:065] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[19:10:48:080] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[19:10:48:080] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[19:10:48:096] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[19:10:48:096] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[19:10:48:096] : NV Write Fail : NV ITEM 9028(9028)
[19:10:48:205] : >> GET DLOAD COMM MODE
[19:10:51:232] : RX Timeout : 3.0 seconds
[19:10:51:232] : RX TIMEOUT
[19:10:54:258] : RX Timeout : 3.0 seconds
[19:10:54:258] : RX TIMEOUT
[19:10:57:284] : RX Timeout : 3.0 seconds
[19:10:57:284] : RX TIMEOUT
[19:10:57:300] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[19:10:57:300] : Close Port<<
[19:10:57:300] : TYPE_WPARAM_UPGRADE_ERROR
[19:10:57:331] : Log finished
Factory reset? It's the option to clear all the personal data on the phone. You can access it through 'home button' + 'volume down' + 'power button'. It removes all apps, messages, call logs, settings, etc (just the phone personal data - the SD card remains with its content)
oh that? no it doesnt let me boot into anything but emergency mode
purple1 said:
oh that? no it doesnt let me boot into anything but emergency mode
Click to expand...
Click to collapse
Using lgmdp flash any recovery when recovery is flashed then go to recovery by pressing volume down+home+power button and flash any rom like cm7,oxygen etc and don't use kdz it can break your phone completly.
http://forum.xda-developers.com/showthread.php?t=1318750
What is this program? Hey can you gtalk? Or is there any way I can reach you for a faster communications?
Sent from my SGH-T959 using XDA Premium App
Just go to the link and follow the instructions given in the thread don't worry flashing a recovery using lpmdp only take 5-6 min.
vikasb32 said:
Just go to the link and follow the instructions given in the thread don't worry flashing a recovery using lpmdp only take 5-6 min.
Click to expand...
Click to collapse
it didnt work. . . . .
purple1 said:
it didnt work. . . . .
Click to expand...
Click to collapse
Can you tell me what error occur?
vikasb32 said:
Can you tell me what error occur?
Click to expand...
Click to collapse
it went through good but it does the same cycle as if nothing changed
purple1 said:
it went through good but it does the same cycle as if nothing changed
Click to expand...
Click to collapse
Dude tell me recovery in installed or not.you can check by completely turn off your phone then press home+volume down+power.if recovery is install then you can flash any rom.
Im telling you its not, it does the same thing, rebooting the same way and I can't get into recovery like before. Its like nothing flashed
Sent from my SGH-T959 using XDA Premium App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lg screen then update screen then reboot all in 3 seconds I can only get into emergency mode nothing else works I can't get into recovery
Sent from my SGH-T959 using XDA Premium App
Solved?
Did this issue ever get solved? I have the same thing happening with my p509. Have tried everything posted on here and every other forum with information on bricked phones. Phone does not have custom recovery nor custom rom. after all of my experimentation with all of the software touted as THE solution, I am here. with the same f*cking boot-loop, blinking, ever so defiantly in my face. Letting me know that the only thing it will ever do is boot to emergency mode.
Any help would be fantastic!
Related
◘►◘►[FLASH + ROMS][v20B.KDZ] KDZ Files on WINDOWS 7 (64) & XP + Download◄◘◄◘
PROGRAMS:
OFFLINE INSTALLER DOWNLOAD
DOWNLOAD FLASHING PROGRAMS
md5: "7723D5D55BD7451BE34BE47A3E1FE4DD"
P920 ROMS:
DOWNLOAD V20B_00.KDZ FIRMWARE newest
md5: "?"
DOWNLOAD V21B_00.KDZ FIRMWARE (no root)
md5: "CFE9E5295788E910190D271306B66421"
DOWNLOAD V21A_00.KDZ FIRMWARE Official European GB
md5: "31d9d9ff9ae226343576020e11df0543"
DOWNLOAD V10K_00.KDZ FIRMWARE
DOWNLOAD V10D_00.KDZ FIRMWARE
P920H ROMS:
DOWNLOAD V20A p920h_00.KDZ FIRMWARE Official p920h Gingerbread(no root atm)
DOWNLOAD V10C p920h_00.KDZ FIRMWARE Latest froyo
ROOT V21B Try using vipermod
ROOT USING SuperOneClick
YOU DO NOT LOSE ANY DATA. ROOT and CWM WILL BE REMOVED.
How to prevent LG Mobile Support Tool update - thanks to unknown_world
If You have LG Mobile Support Tool(LG Mobile Update program) go to 2nd point.
1.
a)Install "B2CAppSetup.exe" and run LGMobile update.
b)Install drivers.
2.
a)Connect your phone to PC with USB "debug" mode enabled and wait for drivers to install.
(menu/settings/application/development/USB debugging )
b)Install msxml.msi (Right click on file and select Install)
c)Turn "windows enabler.exe" and switch to the "ON" position( left click on icon)
3.
Start "UpTestEX_mod2_marwin.exe", select your KDZ file.
Set emeregency, 3gQCT as pictured and press "NORMALL WEB UPGRADE TEST"
The program start official LG Flasher.
You do this on your own risk!
EDIT:
If you have problems with communication phone-computer, try go to download mode:
Thanks for video for Trekfan422991
THX for flash idea for reddoors (http://translate.googleusercontent....rt=290&usg=ALkJrhi_-JBzCvit90Wt6uvbS2gDbo5Z2Q)
thx works perfect
This is nice to know for when GB finally does come back out and we need to go back to stock
Thanks
works fine.. many thanks for the post
Everything is ready, but seems not work to me at last......how to solve it? Thank you~~
It said:
01:27:10 : [C:\LGMobileUpgrade] Try to delete folder
01:27:10 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
01:27:10 : Start Date : 2011-10-05 01:27:10
01:27:10 : ---------- QM Testmode ---------
01:27:10 : ***** Check Tool Version *****
01:27:10 : Tool version : 1.5.3.3
01:27:10 : UpgradeDLL version : 1.2.6.0
01:27:10 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
01:27:10 : LGE USB Driver Version :
01:27:10 : Android PDLV Version :
01:27:10 : Android NDLV Version :
01:27:10 : ******************************************
01:27:10 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
01:27:10 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
01:27:10 : SetEmerModeAT()
01:27:10 : _IsConnectedPhone Call
01:27:24 : _IsConnectedPhone(1)
01:27:24 : 0 - NotConnected.
01:27:24 : 1 - Normal connect success
01:27:24 : 2 - Emergency connect success
01:27:40 : *****CheckOS Start********
01:27:40 : Microsoft_Windows7_Professional_Service Pack 1
01:27:40 : *****CheckPCSyncPrograms Start*****
01:27:41 : PCSyncPrograms Not Found - OK and ready to upgrade
01:27:41 : Checking the connection with the cell phone...
01:27:41 : dwWaitResetTime(40000 ms)
01:27:42 : Phone Mode(1)
01:27:42 : *****GetPhoneType Start*****
01:27:42 : Phone Type : OMAP_IFX
01:27:47 : *****GetPhoneModel Start*****
01:27:48 : Phone read Model : LG-P920
01:27:48 : Server param Model :
01:27:48 : *****GetPhoneBinaryVersion Start*****
01:27:51 : Phone Bin Version : V10D_00
01:27:51 : *****Get ESN / IMEI / MEID Start*****
01:27:55 : ESN/IMEI/MEID : 357????????????
01:27:56 : Phone type Compare start
01:27:56 : *****Start _GetBatteryLevel*****
01:27:58 : Battery(4)
01:28:00 : *****CheckPCSyncPrograms Start*****
01:28:00 : PCSyncPrograms Not Found - OK and ready to upgrade
01:28:01 : ****************CheckAndDownload********************
01:28:01 : ******Extract Start C:\V10K_00.kdz\V10K_00.kdz*****
01:28:01 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
01:28:01 : File Size = 394020394
01:28:01 : Extract kdz file Error.
01:28:01 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
01:28:01 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
01:28:01 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
01:28:01 : CLGMobileHttp Class 模資衛濛.
01:28:01 : CLGMobileHttp Class 模資...
01:28:01 : Page_Error 睡碟殮棲棻
01:28:01 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try to close UpTestEX_mod2_marwin.exe when Flash starting.
If not working maybe you have corrupted kdz file "01:28:01 : Extract kdz file Error.". Download again the file.
Thanks easy as pie and all work fine. ReRoot needed.
Work perfect after re-download the rom.
Is that mean I can use this program for the future rom update?
Sent from my LG-P920 using XDA App
sorry for my question but.......after flashed i keep having all apps, root permission and cwm, contacts, ecc.....????
i have a O3D branded...and i'd like to put the no brand rom....so i will use this....
After flashing root and CWM will be deleted.
You do not lose any data, contacts, settings.
Ok thks!! ...no problem if i have CWM??
Can I backup the brandend rom in case i will need it???
You can backup rom before flashing.
Many people flashing with CWM and working fine.
After flashing write feedback
flashed....rooted...everyting's ok!!!!
Optimus 3d Brick Solved.
I managed to solve my problem, I did follow this tutorial on Windows 7 32 bit. Works 100% I assure you, if you will repair the display bug appears xxxxx (I did not have time to see which) and then will come out the android robot with a bar and everything solved. I put the firmware version V10K_00.kdz not know if the same happened with the other.
Thanks to adixtra for that tutorial, had long been trying.
Always reboot after flashed 10K.....
hm...
On my phone works perect.I never have a reboot and battery life is increased.
what does it do?
vilks said:
what does it do?
Click to expand...
Click to collapse
I write about V10k firmware.
what? i dont understand u. sorry ;/ is this threed for rooting? im searching now guide to root. found one, but cannot instal phone drivers on win7 64bit. i had problem with htc wildfire too, couldnt instal adb drivers. so now is something similar.
Guide How to root http://forum.xda-developers.com/showthread.php?t=1178077
New drivers http://www.filesonic.com/file/2356565441/MCCI(r)Firmware_Update_Driver_for_MTK.zip
This is my first message in xda developers, hope to find a solution here. I want to unroot and clean my phone. So I downloaded the stock rom, the KDZ FW Updater, windows enabler,.. All the mobile drivers are okay, i plugged in the phone with usb in sw update mode, i started the upgrade with KDZ_FW_UP.exe, it waits, extracts for a while, then win7 says it is not responding. When i look at the log, it crashes at the "Call fn_StartUpgrade" step. I tried it in several pc's but still the same problem. How can i fix this? Here is the log:
Code:
13:57:39 : Start Date : 2013-09-13 13:57:39
13:57:39 : -------- QM_Version mode ---------
13:57:39 : ***** Check Tool Version *****
13:57:39 : Tool version : 1.6.7.3
13:57:39 : UpgradeDLL version : 2.1.2.0
13:57:39 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
13:57:39 : LGE USB Driver Version : 5.0.0.0
13:57:39 : Android PDLV Version :
13:57:39 : Android NDLV Version : 3.10.0.0
13:57:39 : ******************************************
13:57:39 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
13:57:39 : SetEmerModeAT()
13:57:39 : _IsConnectedPhone Call
13:57:39 : _IsConnectedPhone(0)
13:57:39 : 0 - NotConnected.
13:57:39 : 1 - Normal connect success
13:57:39 : 2 - Emergency connect success
13:57:39 : PhoneÀÌ Notconnect »óÅÂÀ̸ç Port¸¦ ÀâÁö ¸øÇß°í Åë½Å ÇÒ¼ö¾ø´Â »óÅÂÀÓ.
13:57:39 : ¾÷±×·¹À̵å ÇÏ´Ù°¡ ½ÇÆĞÇÑ ±â·ÏÀÌ PC¿¡ ³²¾ÆÀÖÀ¸¸ç Æù°ú Åë½ÅÀ» ÇÒ¼ö ¾ø±â ¶§¹®¿¡
13:57:39 : ȯ°æºĞ¼® ´ë½Å ¸¶Áö¸·¿¡ ¾÷±×·¹À̵带 ½ÃµµÇÑ °ªÀ» °¡Áö°í ¾÷±×·¹ÀÌµå ½Ãµµ¸¦ ÇÔ.
13:57:39 : ȯ°æ ºĞ¼® ºÎºĞÀº Pass ÇÏ°í File download / Decrypt °úÁ¤À¸·Î PassÇÔ.
13:57:39 : *****CheckOS Start********
13:57:39 : Microsoft_Windows7_Professional_Service Pack 1
13:57:40 : B-ÀÎÁõ °Ë»ç ÆĶó¸ŞÅ¸ - ESN_IMEI : , Model :
13:57:40 : Phone type Compare start
13:57:41 : ****************CheckAndDownload********************
13:57:41 : Version : V10C_00
13:57:41 : *****OpenURL Start*****
13:57:41 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
13:57:41 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
13:57:41 : *****OpenURL Start*****
13:57:42 : CreateFile : C:\ProgramData\LGMOBILEAX\Phone\V10C_00.kdz
13:57:42 : =============HEADER : Range:bytes=0-=====================
13:57:42 : *****OpenURL Start*****
13:57:43 : *****DownLoad Start***** (Size:465835175)
14:06:35 : Receive OK 465835175/465835175
14:06:35 : =============TAIL : 465835175=====================
14:06:35 : Receive Size (465835175/465835175)
14:06:35 : *****CheckWebDownError Start*****
14:06:35 : File Error check OK
14:06:35 : ******Extract Start C:\ProgramData\LGMOBILEAX\Phone\V10C_00.kdz*****
14:06:35 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
14:06:35 : Check 2G-4G big size kdz file..
14:06:35 : File Size = 465835175
14:06:41 : Extract kdz file Success.
14:07:17 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10C.wdb
14:07:17 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10C.wdb)
14:07:17 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP725.dll
14:07:17 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP725.dll)
14:07:17 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10C.wdb)
14:07:17 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP725.dll)
14:07:17 : Extract End C:\ProgramData\LGMOBILEAX\Phone\V10C_00.cab
14:07:18 : ------------------Model.dll Information-------------------
14:07:18 : Filename : LGP725.dll
14:07:18 : Version : 1.0.0.5
14:07:18 : File size : 270336
14:07:18 : File date : 2012/01/30-17:11:32
14:07:18 : PC Created date: 2013/09/13-14:07:17
14:07:18 : ----------------------------------------------------------
14:07:19 : *****Check LGCM Programs Start*****
14:07:19 : LGCM Programs Not Found - OK and ready to upgrade
14:07:19 : m_pLGCyonUpdate status change.
14:07:20 : *****WorkModelDLL Start*****
14:07:22 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10C.wdb)
14:07:22 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
14:07:22 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP725.dll)
14:07:22 : _DetachDLL Call
14:07:22 : _DetachDLL Call End
14:07:22 : Call fn_StartUpgrade
Here is a screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have same issue with lg p920 think mine ends with same error on the log but i cannot read full log before it closes. I suspect my problem may be because i cannot install b2c app (another lg program) as i have no internet connection on pc so it will not run. Can you confirm weather you have ran b2c app on pc?
Sent from my LG-P920 using xda app-developers app
I finally did it. I installed virtual win XP and then after a few tries it finally worked and there's no problem anymore. THANKS FOR NOTHING
budgetbumping said:
I have same issue with lg p920 think mine ends with same error on the log but i cannot read full log before it closes. I suspect my problem may be because i cannot install b2c app (another lg program) as i have no internet connection on pc so it will not run. Can you confirm weather you have ran b2c app on pc?
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I tried lots of times with b2c app and it didnt work. When it downloads the FW files and start to upgrade it stucks at 4%. In win7 the kdz updater crashes. So try the same thing with winXP.
Note: the log is b2c app's log. b2c app and kdz fw upd both stop at the same step (call fn_startupgrade)
Ok thanks for your help and sorry i could not help you. But glad you got it fixed i am going to try lg flash tool next because i cannot get online for b2c to do update check and do not have xp disc to create virtual xp (xp sp2 compatabillity mode is all i have running vista and is not working). But i will create my own thread now and leave you alone if im stuck again. Thanks again
Sent from my LG-P920 using xda app-developers app
help!
Some body help my lg p720 stuck on lg logo, I try flash stock fw, but it always stuck on logo!
How to hard reset lg p720?
hsrose09 said:
Some body help my lg p720 stuck on lg logo, I try flash stock fw, but it always stuck on logo!
How to hard reset lg p720?
Click to expand...
Click to collapse
Press and hold "3D Button + vol down + Power"
[ROM][PORT][ JB 4.1.2]- MIUI V5 VOLLO VX 98 Unofficial
This rom has been ported for the Device Vollo Vx98 (Chinese smartphone ) , Since I did not like the stock rom of this device andthat inspired me to port the most popular MIUI V5 on this device
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS :
XDA DEVELOPERS
XIAOMI
Rishab Raj for Porting guide
Amit Goyal for testing
Pandawill for base soruce code
Click to expand...
Click to collapse
!!!!DISCLAIMER: Rooting your phone and using custom ROMS have risks, You may brick your device
if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup
of your phone before proceeding ....Blah blah ......blah !!!!!
Click to expand...
Click to collapse
Pre-requisite :
1.Rooted phone.
2.CWM Recovery Installed .
I managed to get the CWM recovery of similar specs Chinese phone which is working flawlessly but it gives little graphics jerk during very first time
entering into recovery..but all the features works perfectly fine.If some developers can help me fix that will be great ..suggestion welcome
INSTALLATION Instructions
• Download Rom and copy to Sd card
• Reboot into CWM Recovery
• Enter Mount and Storage -> /format system
• Wipe data/factory reset -> Wipe cache partition enter Advance -> /wipe dalvik cache
• Flash ROM = wait until finish
• All Done enjoy
Whats is working
[*]Wifi
[*]Camera
[*]Dual sim
[*]3G
[*]All MIUI feature
What is not :
Screen shot comes upside down .and you know how to fix that
rest
You tell me
Download
Recovery >>>DOWNLOAD
MIUI V5 > >>>DOWNLOAD
Click to expand...
Click to collapse
Basic GAPPS Flash Tutorial
1.After first boot reboot your phone to recovery again.
2.Select [install zip from sdcard] → [choose zip from sdcard]→ [XXX-GAPPS.zip] → [YES]
3. Wait flash finished, press Back and select reboot system now [], the phone going to automatically restart with installed GAPPS.
4.Set up your Google and Xiaomi Accounts(for themes).
MIUI JB/4.1.X - DOWNLOAD
Click to expand...
Click to collapse
Hit Thanks If you Like my work !!
Click to expand...
Click to collapse
Some of the screenshots of MIUI V5 for Vollo VX98
some people asked me CWM flashing method ..so here are some of the instructions those who are not aware of the Fastboot
You can use Fastboot methoed to install the CWM recovery with following command
fastboot flash recovery your_recovery_image.img
But most important part is how to setup the fastboot working folder and fastboot detects your phone .
Follow the instructions :
1. Install the device drivers of Vollo Vx98 ( which you get when you connect your phone with stock rom in CD icon )
2. setup fastboot working folder , extract the files in some working folder .
3. Now Turned OFF phone and after that hold VOLUME – button and plug phone into computer while powering on phone .
4. Now Phone should be in fastboot mode with no sign on the phone ( does not display anything ).5. Lets assume you are in C:\fastboot (working folder).check your device whether it is connected to fastboot or not .execute this command
" Fastboot devices " . you should see serial number of the device " MSMSKUD" .. If it says " Waiting for devices " then Your fastboot is not setup properly .
6 .Put the recovery file in the C:\fastboot folder .
7 . execute the command " fastboot flash recovery your_recovery_image.img."
8. Reboot into recovery .. There is some initial graphics problem in this recovery during load once loaded everything works fine .
How to enter into recovery : Press Power On +Volume up key ( Indication - phone vibrates when enters )
How to enter into Fastboot : Press Power on + Volume Down key ( Indication - phone vibrates when enters )
Download :http://en.miui.com/forum.php?mod=at...kMGRlZDR8MTM4OTI3NTkzNnwxNTU4OTU5OTZ8MTI2NDc=
Credit to XDA Developers : not sure his name
XPERIA Keyboard ( Tested -Working flawlessly on vollo With MIUI V5 )
If you want to change the Keyboard ( OPTIONAL) in place of Baidu input (chinese ) ... Hit the below link ...
Installation Instructions..
Download the Zip file.
place on to the Micro SD Card .
Reboot into CWM recovery.
Go to Install from SD card > Choose File > Flash > Wait until finish.
Rebooot. done!! Enjoy .. Hit Thanks If you like ..
Download >>>https://drive.google.com/file/d/0Byi9A80ZsWakYzQ0T1hSMHphWDg/edit?usp=sharing
Many thanks for manual. I maked one another package for my sister with polish language. Now only testing phase hope that phone functions will work fine now, because orginal vollo rom is realy bad.
For updating language check:
http://en.miui.com/thread-6222-1-1.html
And download this:
http://forum.xda-developers.com/showthread.php?t=1736409
U need to change settings in build.prob for me
ro.product.locale.language=pl
ro.product.locale.region=PL
Can be done with morelocale or some another locales settings apk.
Many thanks once more!
One of my Rom follower has already done on my Thread at MIUI .. you may check with him in case you need any information
http://en.miui.com/thread-12647-1-1.html .. "Mephisto.85 "
I found one bug - after some time, the phone stopped ringing on incoming calls. It only vibrates. No settings seems to change this.
Also, I forgot to backup the old ROM, so if someone has original rom for this phone I'll be thankful if they share with me.
Dead boot repair done Samsung I9103 sucessfully wit free tool Tested by me
This tool can fix it by USB cable only so no need to disassemble the phone and no need to use JTAG boxes even.
To use this tool you need to enter APX mode ( Volume Up key + Home Key ) then connect USB cable to Phone.
After you repair the dead phone it will be into Download Mode, So you can Flash it with Original Firmware.
update the driver manually goto device manager/APX drive right click nd show d path 2 update. driver is included n d zip file.
Then run the GT-I9103 windows batch file there type 1 and press enter nd it vil start d process.
after finish it vil go into odin download mode .use odin nd update using original stock firmware below given.
Download: Samsung I9103 Galaxy R Dead Phone Fix by USB
Firmware Download
Odin Download
Pit file Download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well screenshots says the story but just to be sure, have you personally performed and it worked for you?
curious to know as similar method is no longer working for many users and this will be very helpful to them.
ya its tested my me . 100% working solution . if the driver installed correctly it shud work.
Sent from my GT-I9500 using XDA Premium 4 mobile app
This is awesome one.
भेजा है मेरे डिस्टर्ब™ मोबाइल से तापाटाक के द्वारा
help
promt closing on creating partition bct! any can help?
drakestorm said:
promt closing on creating partition bct! any can help?
Click to expand...
Click to collapse
Same
I get this error :
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
5 (0x1000005) flags: 0
Please help
EDIT : I tried again in Linux, it goes wrong at BCT Only.
I think the BCT File is corrupted or wrong. Could anyone take a fresh BCT and upload over here? Please
Instructions to Get BCT : http://forum.xda-developers.com/showthread.php?t=934023
Awesome
jamesjerss said:
Dead boot repair done Samsung I9103 sucessfully wit free tool Tested by me
This tool can fix it by USB cable only so no need to disassemble the phone and no need to use JTAG boxes even.
To use this tool you need to enter APX mode ( Volume Up key + Home Key ) then connect USB cable to Phone.
After you repair the dead phone it will be into Download Mode, So you can Flash it with Original Firmware.
update the driver manually goto device manager/APX drive right click nd show d path 2 update. driver is included n d zip file.
Then run the GT-I9103 windows batch file there type 1 and press enter nd it vil start d process.
after finish it vil go into odin download mode .use odin nd update using original stock firmware below given.
Download: Samsung I9103 Galaxy R Dead Phone Fix by USB
Firmware Download
Odin Download
Pit file Download
Click to expand...
Click to collapse
Thanks a lot.. :laugh::good: This works like a charm, a 100% solution !
saved my R today..
its working for me
thanks alot
help
can it be work on samsung galaxy ace dous sch i589
thank you verey much it's working 100%
good work.it's working 100%.thanks alot.
hi i'm not sure if anyone will see my message but i'm giving it a try ! you said i have to enter apx mode to repair dead galaxy r ! my phone doesn't work at all. even my computer says can't find apx when i plug it in ! i have tried the ( Volume Up key + Home Key ) method and its still dead ! i have changed my phone but i can't stop thinking of fixing my old phone
Try in different Windows os. Maybe Windows 7
Sent from my GT-I9103 using Tapatalk
nvo2411 said:
Try in different Windows os. Maybe Windows 7
Sent from my GT-I9103 using Tapatalk
Click to expand...
Click to collapse
it is windows 7
samsung SM-G7102 dead phone no display but pc show it Qhsusb_bulk
Qhsusb_bulk
Hello dear friend I got a phone GALAXY Grand 2 G7102 recovery img unauthorized installation and break it not after the screen turns off and the driver shortage pc QHSUSB_BULK show
samsung SM-G7102
I've installed the recovery Grand duos on it
After the reboot page can not approach(show)
and i cannot use the :
download mode
factory rest
hard rest
i just can connect to pc and( QHSUSB_BULK missing) i have installed the driver but nothing
no viber , sound , ....... in the phone (samsung SM-G7102)
Thank you so much
See your identical post .
Guys... longtime, i just found galaxy r while cleaning my house.. and tried to boot and it goes to apx. Do anyone have working galaxy r, i may need some help from you.. also, if anyone have dead phone and just lying.. you can send me, i am trying something with hardware..
karthik050782 said:
Guys... longtime, i just found galaxy r while cleaning my house.. and tried to boot and it goes to apx. Do anyone have working galaxy r, i may need some help from you.. also, if anyone have dead phone and just lying.. you can send me, i am trying something with hardware..
Click to expand...
Click to collapse
Hi karthik, it has been a long time since I have heard from u
I have a working galaxy r and I'm still using it
Sent from my Le X520 using Tapatalk
Great.. can u please try to extract the partition layout using nvflash
Died
Hi; help me ; My phone don't turn on. Even don't vibrate. When plug in don't show charging icon. I can't boot that to flashmode. I flashed roms many times on that. May that case problem? Help please
Hi again I'm in Mexico just saying , and recently get two NYX REX Telcel whit MTK6735 and the problem here is I had not to much experience whit MTK devices, I have read some about but it is a lot to read I'm not saying I want short cuts but i not getting any where, then I decide to come here I wont bored you whit my life just try to fix those phones and in the process made an a how to tutorial.
Well the phones had a problem they frozen and get reboot every some time, or touch the screen, or open an app I have try many things since I thought it was a virus on the system and probably it is or just the rom is corrupted I say that because I test the ram with SP Flash Tool and it passed.
I'm a Linux user Fedora whit adb installed and working, fastboot and now SP Flash tool "I'm new in this" in fact I did screw one of the phones testing :silly: I press Download and it works i think but nothing was selected the phone do not power on.
I have the rom witch one is posted on needrom by robotixs, well i was going to put the link but I'm restricted, I get it from one post here I'm not remember whose sorry.
ok let's focus on where I'm stock and if is something blackguards let me know please !
I ran SP Flash Tool from terminal as root to avoid permission problems on udev or etc.. if I'm doing wrong pleas let me know
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then I already select the Download-Agent SP_Flash_Tool_v5.1916_Linux/MTK_AllInOne_DA.bin ok .
and the Scatter file from inside of the zip file from de rom wich on name fix whit the one it is need it MT6735M_Android_scatter.txt.
then I turn off the phone well it is already off it does not turn on right but the tutorial say that ok without the battery, I press Download button on Sp Flash Tool and connect the phone
some times i get an alert it say
ERROR : S_TIMEOUT (1042)
and in the terminal i get
Code:
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:10.0/usb3/3-1
[email protected]/devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0
[email protected]/devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1572202390.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
COM port is open. Trying to sync with the target...
Failed to Connect DA: S_TIMEOUT(1042)
Disconnect!
BROM Exception! ( ERROR : S_TIMEOUT (1042)
[HINT]:
)((ConnectDA,../../../flashtool/Conn/Connection.cpp,146))
and some other times hives an alert it says ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
and in terminal shows
Code:
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:10.0/usb3/3-1
[email protected]/devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0
[email protected]/devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1572203420.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
COM port is open. Trying to sync with the target...
Failed to Connect DA: S_FT_ENABLE_DRAM_FAIL(4032)
Disconnect!
BROM Exception! ( ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.)((ConnectDA,../../../flashtool/Conn/Connection.cpp,146))
I'm wonder me why it is this happening, it is not the correct rom ? the Scartter file is wrong ? how i can do to fix this ? by the way I try to flash from fastboot on the other phone the recovery whit TWRP for MT6735 witch i get from here to and bad news boot loop I have the log history from SP Flash Tool in both cases but i will add at the bottom if is need it
if some one can help i will appreciate.
alps x23 briked
x23 brikado