I got a Zenithink C91 with 4.0(it comes out of the box rooted) on it and i bought the superuser elite settings and downloaded superuser 3 beta 4 and tried to flash it onto my C91. Now when ever i open my root only apps it says my device is unrooted a message i wasn't receiving before i tried to install superuser 3 beta 4. Things i've already tried:
1. Flashing it again
2. Installing the APK instead of flashing
3. taking it back to factory default
4. flashing the original version of superuser onto the device.
As it is right now the device works but i would really like my superuser privileges back. If any of you have any ideas i would be most appreciative.
I have dev tools on it if that helps
Sent from my ZT ICS using XDA
Answer
I found the answer. If anyone else has this problem go to the zenithink website and download the newest updates and flash your device it did the trick for me
Related
HI
I am using a transformer with
Build Number: HTK75.CN_epad-8.6.5.1-20111216
I have used Natchoroot to root it and it was ok, everything run smooth by then, after that i downloaded, superuser, Voodooo root keeper which specifies that my transformer is rooted, i also did titanium backup successfully which is also an indication that my device is rooted as far as i can tell
Now that the ICS is already here, i still didnt get the update, however i think it'd take a while to come to china with all the restrictions they put on the device (No maps, No Market, No youtube, No facebook, and you name it)
Anyway i thought it'd probably be a better to just flash a WW version of ICS
but a few minutes ago i tried to download CWM from here
http://forum.xda-developers.com/showthread.php?t=1346180
And as soon as i try to open it, it tells me that my device is not rootes although like i mentioned before everything indicates that i am rooted because when i open voodoo ota keeper i get the message that it was granted superuser permissions.
So can anyone refer me to other mean to install a CWM ? i've searched the forums but all of the ones i've found are newer version and they all require to already have an older version of CWM
Thanks for your help
Hello all,
I have had my Galaxy i5500 for awhile now and have used odin to flash updates for the firmware etc.
I have recently rooted my phone using Superoneclick and this worked fine. Overclocked the phone, and ran a number of Apps using SuperUser Access to gain all the benefits from this.
I installed Titanium Backup and Installed it on my SD Card, this caused a number of problems and I had to pull the battery on my phone to reboot it. Anyway it then hung at the GT-I5500 screen and I ended up having to download a new firmware (not custom) and use Odin to update it.
I now have a working phone, however I now can't root it. I have tried Superoneclick, that no longer works. I have also tried Universal Androot..with that I get an error message of Root Failed - No Fu Guu (or something like that) and I have just tried using z4root... with that it says acquiring Root Shell and then it just kicks me out...have checked and it's not rooted.
I also can't seem to access the reboot menu on my phone (the one where you press a couple of buttons to enter the menu where you can factory set your phone.
Can anyone shed any light on this? Other than these problems mentioned, the phone works as it should
Solved....
It took awhile of trying different root software but.... after reflashing my phone with another stock rom, I found Super One Click still didn't work, nor did z4root or universal Androot (I'm guessing it would have worked without reflashing a different rom).
I did however find that Unlock Root 2.2 worked! My phone is now flashed, no error messages and I have Superuser Access!! Now time to install a custom bootloader and start with the custom roms!!
Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
I started this thread just because of the issue SUPERSU 0.99 brings to HTC One S with Jelly Bean update.
I hope i can help someone because i didnt find any solution to my problem until i flashed superuser and it solved my problem.
shadowch31 said:
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
Click to expand...
Click to collapse
I agree that this adds clutter, but I have been lightly following the threads for the JB ROMs and tried using superuser (though not the rc) without it working (still unable to update system). It's good to have this kind of solution in its own thread but general would probably be a better section.
Sent from my HTC One S Special Edition using xda app-developers app
This doesn't belong in the dev section for multiple reasons
Sent from my HTC VLE_U using xda app-developers app
Im sorry i didnt see that it was Development section. If someone can move it pls do so.
everyone uses SU...... this is very important for everyone using JB... leave it in here...
I feel it belongs here... this is where SU apps are in the development section... SO, this is where it should stay... (that is just my opinion)
I never want to start this thread like an development because im not a developer.
Reason is that i want to share my issue with anyone who is facing the same problem as i did.
Just like i said if someone think this thread doesn´t belong here then admins can move it to right section.
Updated to JB with OTA yesterday night.
Short version:
-Initially rooted with CWM recovery-> flashed MoDaCo stock recovery
-Apply OTA
-Flash CWM recovery
-Used CWM recovery to flash SuperSU 0.99 zip
-Uninstall/reinstall SuperSu from the Market
When starting SuperSU, it asks for update, if agree -> reboot.
BUT
When using root needing apps, like Titanium backup or FX file manager, they ask for root permission through SU and everything runs normally.
So SuperSU seems to work, only the front end app has some bug. I'm staying with that config waiting for an update.
Hi, same problem here on S3 cpu. Is this method works on S3 cpu as well? Thx for replying.
Hi. I think I have a problem with SuperSU (or something else??). I first started SuperSU last thursday (31.1.2013.). It ask me to update binary, I hit OK, and then it took about half hour to restart. System then recovered, and everything seem to be OK, but it's not!
When I connect my HTC One S to PC I only see files created (photos, videos) until 31.01.2013. Also, when I run Settings -> Memory com.android.settings crashes.
What to do?
I'm new to android. Plese help!
bihslk said:
Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Click to expand...
Click to collapse
I'm glad I ran across your thread. It helped me tremendously...
Da Baron
Any idea on how to get SuperSU work instead of SuperUser? I purchased SuperSU in the play store and I think it just looks better...
So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.
Reserved.
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app
Reserved
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app
UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.
Thank you for this. How many tablets has this been tested on ?
It works !!!! Now we need some lollipop on it !
memory swap mod
shawnj0 said:
UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.
Click to expand...
Click to collapse
Hi, thanks for this.
Will a memory swap mod, to make the tablet see the external SD Memory as the internal storage, work with the P310A?
Searched and found this for another Alcatel device:http://forum.xda-developers.com/showthread.php?t=2284347&page=39
Is something like this already available for the tablet?
Will be a big improvement if this can be ported to the P310A, and then have a 32Gb or even a 64 Gb memory card be seen as the internal storage.
Thanks.
I have one of these little tablets from T-Mobile (gotta love free) and love it. Last night I got an update warning but have not installed it yet. Unfortunately there is very little information for them like custom ROMs or custom recovery. I would even like to find the software and files needed to return the device back to stock if there was ever a problem and it needed to be reflashed back to out of the box state. Let me know if I can help as I would love to see more for this awesome little device.
Btw, interesting fact about T-Mobile 4G on these tablets. The base is 10 USD for 1gb of 4G a month. All T-Mobile tablets also come with free 200mb 4G a month one top of that. If you have the highest plan at T-Mobile (80 USD a month, unlimited everything including 4g, no drop back to 3g at all) then the tablet actually gets 5gb a month of 4G for the 10 USD instead of 1gb.
..
Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.
Try this :wwwDOTmgyunDOTcom/m/en
It rooted my tablet and 2 others. It will install a "kinguser" superuser app. Download clockworks superuser from the play store.
Then disable kinguser and allow clockworks superuser to do its job.
TheEditor said:
Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.
Click to expand...
Click to collapse
Can you please share what is on the update?
Find out the update is still on 4.2.
According to the Tmo support site is to improve battery, camera flicker and freezing.
That is about all I see in the update. The version is still the same and I have not seen any real difference personally. Kind of wish I hadn't updated.
Btw, thanks for the recommendation. I am rooted again, woohoo.
---------- Post added at 02:46 AM ---------- Previous post was at 02:00 AM ----------
Well, I am rooted but the only SU that will work is the installed KingUser, no others will work for me.
I have the same tablet, but the P310X, not the P310A variant. Is it safe to flash the CWM recovery? I tried booting into this recovery without flashing by the fastboot flash command, but nothing happens after the transfer, the device won't boot into the new recovery.
After a little searching, it seems to me the two varians only differ in the supported cellular networks and frequencies.
Ok so I rooted this device with kingo at first. I kept have su binary issues. I installed cwm and tried to update su binary through there. I tried booting into recovery using quick boot. My tablet is stuck on tmo screen. Hard reseting takes me back to cwm but I have no backup yet , had no time to even make one. Does anyone have one by chance or a way for me to boot back up through cwm?
Recovery flashed successfully and looks great but, no partitions will mount and I cannot flash any .zips. Anyone else having issues?
I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??
Possible lollipop rom?
shawnj0 said:
So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.
Click to expand...
Click to collapse
i have this device and i have searched pretty much everywhere for a mod. can you show me how i could get a lollipop mod ( if there is one available). its a pretty nifty device and it i'm hoping to get the lollipop experience on it. Thanks.
Crying on the inside
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?
Sir Webb said:
I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??
Click to expand...
Click to collapse
I have it
SuperUser666 said:
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?
Click to expand...
Click to collapse
Did you ever get this working? I have this tablet rooted, but no recovery...
I don't mind giving either of you my backups from titanium
Hi everyone,
I received the OTA update notification a long time ago but didn't have time to take a deep look into it (baby on the way... now arrived !), but I'm trying to install a lollipop ota update on my moto g.
It's not my first android device, I had about 10 of them and messed around with them, so don't be affraid to use the vernacular directly, but I'm aware that I might be making a rookie mistake too
My phone is a 1st gen 16Gb Moto G. IT's running 4.4.4 (System version 210.12.40.falcon_umts.Retail.en.FR, I'm in France by the way). I did a few things to it :
- unlock bootloader
- install CWM
- root
- install xposed
- install cerberus and moved it to system apps
Before trying to install it I tried to reverse the steps back to stock :
- move cerberus back to user apps, and uninstall it just in case
- remove xposed
- unroot using the option in the SuperSU menu
- go back to kitkat stock revovery, using mototool v2.6 (so this might a 4.4.2 but I didn't find another one so far)
Then I clicked on the OTA notification, anouncing that 220.27.1... was ready to be installed, downloaded it ok, chose to install it.
Everytime I tried the phone rebooted, began the install and after a short while showed a error message and rebooted.
I tried to install it by putting the OTA zip file in /sdcard and install it with the stock recovery, but here's what I found out :
After downloading the OTA on the phone if I go to /cache/ (where the ota zip file is downloaded. To do that I need root access so I got to flash cwm and root it again, fyi) it shows another file, not corresponding to 220.27 but named : Blur_Version.210.12.40.falcon_umts.Retail.en.FR.zip .... which is weird because it's the version that's supposed to be installed already !
I tried something else, found the "Blur_Version.220.27.1.falcon_umts.Retail.en.FR.zip" file on a forum, put it on /sdcard/ and try to install it through recovery... same error.
Does anyone have an idea on how to install it succesfully without having to flash back a stock firmware ?
Thanks a lot to anyone giving a shot, you rock !
Mat
Ps : i tried to find anything similar on the forum but didn't manage to. If i searched with the wrong terms or didn't notice it while browsing trough the different topics, please tell me if you have a clue, and sorry about not having searched well enough.
Found solace here :http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072
Worked perfectly
Sorry for not having searched enough !