Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
I started this thread just because of the issue SUPERSU 0.99 brings to HTC One S with Jelly Bean update.
I hope i can help someone because i didnt find any solution to my problem until i flashed superuser and it solved my problem.
shadowch31 said:
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
Click to expand...
Click to collapse
I agree that this adds clutter, but I have been lightly following the threads for the JB ROMs and tried using superuser (though not the rc) without it working (still unable to update system). It's good to have this kind of solution in its own thread but general would probably be a better section.
Sent from my HTC One S Special Edition using xda app-developers app
This doesn't belong in the dev section for multiple reasons
Sent from my HTC VLE_U using xda app-developers app
Im sorry i didnt see that it was Development section. If someone can move it pls do so.
everyone uses SU...... this is very important for everyone using JB... leave it in here...
I feel it belongs here... this is where SU apps are in the development section... SO, this is where it should stay... (that is just my opinion)
I never want to start this thread like an development because im not a developer.
Reason is that i want to share my issue with anyone who is facing the same problem as i did.
Just like i said if someone think this thread doesn´t belong here then admins can move it to right section.
Updated to JB with OTA yesterday night.
Short version:
-Initially rooted with CWM recovery-> flashed MoDaCo stock recovery
-Apply OTA
-Flash CWM recovery
-Used CWM recovery to flash SuperSU 0.99 zip
-Uninstall/reinstall SuperSu from the Market
When starting SuperSU, it asks for update, if agree -> reboot.
BUT
When using root needing apps, like Titanium backup or FX file manager, they ask for root permission through SU and everything runs normally.
So SuperSU seems to work, only the front end app has some bug. I'm staying with that config waiting for an update.
Hi, same problem here on S3 cpu. Is this method works on S3 cpu as well? Thx for replying.
Hi. I think I have a problem with SuperSU (or something else??). I first started SuperSU last thursday (31.1.2013.). It ask me to update binary, I hit OK, and then it took about half hour to restart. System then recovered, and everything seem to be OK, but it's not!
When I connect my HTC One S to PC I only see files created (photos, videos) until 31.01.2013. Also, when I run Settings -> Memory com.android.settings crashes.
What to do?
I'm new to android. Plese help!
bihslk said:
Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Click to expand...
Click to collapse
I'm glad I ran across your thread. It helped me tremendously...
Da Baron
Any idea on how to get SuperSU work instead of SuperUser? I purchased SuperSU in the play store and I think it just looks better...
Related
Hello. I still have the CM7. 7.0 or something like that ... Early Gingerbread.
But I recently received various updates on various programs on the phone, so I updated everything including super user.
But superuser had reached message that there needed to be updated more, because I had older version of cm maybe ..
But I went into the rom manager and installed from there. Choosed, download the ROM, then:
Super User 3.0.7 EFGH ...
The phone boot was on, but now it crashes just super user all the time, and I get error message:
The process com.noshufou.android.su for Super User program stopped unexpectedly. And I can just shut the crap. Can not uninstall the superuser and install again from the market.
What do I do? Thank you.
When i am writing this i got this thread in similair:
http://forum.xda-developers.com/showthread.php?t=1291104
And he explains it better. I got the same issue.
Hmm.
I dont want to brick my device. I dont even know how to flash that .zip...
Can anyone help me out? Thanks allot!
edit: And the SU update fixer gives me the error: Gaining root access: FAILED! Soo i need to get root again without reflashing my phone...hmm. Im too tired for this now. I should not have updated that ****.
edit2: ****ing YES! I did flash the: su-3.0.2-efgh-signed.zip and now i have rooot. thanks. im out
thread solved.
hi.
i had a rooted nexus s since 2.3.2
had superuser, installed a lot of rom's, no problem.
now i have 4.1.1 that i installed through google's update, the lock on startup is still open.
but application that need rooted devices say to me that mine is not rooted!
i tried to root it again with this http://forum.xda-developers.com/showthread.php?t=1544940
it all went great, but still, apps that need a root won't work.
what should i do?
gania13 said:
hi.
i had a rooted nexus s since 2.3.2
had superuser, installed a lot of rom's, no problem.
now i have 4.1.1 that i installed through google's update, the lock on startup is still open.
but application that need rooted devices say to me that mine is not rooted!
i tried to root it again with this http://forum.xda-developers.com/showthread.php?t=1544940
it all went great, but still, apps that need a root won't work.
what should i do?
Click to expand...
Click to collapse
try using an updated superuser and don't use this section of the thread when asking questions..
you should use CWM to flash superSU.
You will need SuperSU instead of SuperUser.
Sent from my Nexus S©
Closed due to opening multiple threads on the same issue
So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.
Reserved.
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app
Reserved
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app
UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.
Thank you for this. How many tablets has this been tested on ?
It works !!!! Now we need some lollipop on it !
memory swap mod
shawnj0 said:
UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.
Click to expand...
Click to collapse
Hi, thanks for this.
Will a memory swap mod, to make the tablet see the external SD Memory as the internal storage, work with the P310A?
Searched and found this for another Alcatel device:http://forum.xda-developers.com/showthread.php?t=2284347&page=39
Is something like this already available for the tablet?
Will be a big improvement if this can be ported to the P310A, and then have a 32Gb or even a 64 Gb memory card be seen as the internal storage.
Thanks.
I have one of these little tablets from T-Mobile (gotta love free) and love it. Last night I got an update warning but have not installed it yet. Unfortunately there is very little information for them like custom ROMs or custom recovery. I would even like to find the software and files needed to return the device back to stock if there was ever a problem and it needed to be reflashed back to out of the box state. Let me know if I can help as I would love to see more for this awesome little device.
Btw, interesting fact about T-Mobile 4G on these tablets. The base is 10 USD for 1gb of 4G a month. All T-Mobile tablets also come with free 200mb 4G a month one top of that. If you have the highest plan at T-Mobile (80 USD a month, unlimited everything including 4g, no drop back to 3g at all) then the tablet actually gets 5gb a month of 4G for the 10 USD instead of 1gb.
..
Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.
Try this :wwwDOTmgyunDOTcom/m/en
It rooted my tablet and 2 others. It will install a "kinguser" superuser app. Download clockworks superuser from the play store.
Then disable kinguser and allow clockworks superuser to do its job.
TheEditor said:
Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.
Click to expand...
Click to collapse
Can you please share what is on the update?
Find out the update is still on 4.2.
According to the Tmo support site is to improve battery, camera flicker and freezing.
That is about all I see in the update. The version is still the same and I have not seen any real difference personally. Kind of wish I hadn't updated.
Btw, thanks for the recommendation. I am rooted again, woohoo.
---------- Post added at 02:46 AM ---------- Previous post was at 02:00 AM ----------
Well, I am rooted but the only SU that will work is the installed KingUser, no others will work for me.
I have the same tablet, but the P310X, not the P310A variant. Is it safe to flash the CWM recovery? I tried booting into this recovery without flashing by the fastboot flash command, but nothing happens after the transfer, the device won't boot into the new recovery.
After a little searching, it seems to me the two varians only differ in the supported cellular networks and frequencies.
Ok so I rooted this device with kingo at first. I kept have su binary issues. I installed cwm and tried to update su binary through there. I tried booting into recovery using quick boot. My tablet is stuck on tmo screen. Hard reseting takes me back to cwm but I have no backup yet , had no time to even make one. Does anyone have one by chance or a way for me to boot back up through cwm?
Recovery flashed successfully and looks great but, no partitions will mount and I cannot flash any .zips. Anyone else having issues?
I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??
Possible lollipop rom?
shawnj0 said:
So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.
Click to expand...
Click to collapse
i have this device and i have searched pretty much everywhere for a mod. can you show me how i could get a lollipop mod ( if there is one available). its a pretty nifty device and it i'm hoping to get the lollipop experience on it. Thanks.
Crying on the inside
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?
Sir Webb said:
I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??
Click to expand...
Click to collapse
I have it
SuperUser666 said:
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?
Click to expand...
Click to collapse
Did you ever get this working? I have this tablet rooted, but no recovery...
I don't mind giving either of you my backups from titanium
Hi everyone,
I received the OTA update notification a long time ago but didn't have time to take a deep look into it (baby on the way... now arrived !), but I'm trying to install a lollipop ota update on my moto g.
It's not my first android device, I had about 10 of them and messed around with them, so don't be affraid to use the vernacular directly, but I'm aware that I might be making a rookie mistake too
My phone is a 1st gen 16Gb Moto G. IT's running 4.4.4 (System version 210.12.40.falcon_umts.Retail.en.FR, I'm in France by the way). I did a few things to it :
- unlock bootloader
- install CWM
- root
- install xposed
- install cerberus and moved it to system apps
Before trying to install it I tried to reverse the steps back to stock :
- move cerberus back to user apps, and uninstall it just in case
- remove xposed
- unroot using the option in the SuperSU menu
- go back to kitkat stock revovery, using mototool v2.6 (so this might a 4.4.2 but I didn't find another one so far)
Then I clicked on the OTA notification, anouncing that 220.27.1... was ready to be installed, downloaded it ok, chose to install it.
Everytime I tried the phone rebooted, began the install and after a short while showed a error message and rebooted.
I tried to install it by putting the OTA zip file in /sdcard and install it with the stock recovery, but here's what I found out :
After downloading the OTA on the phone if I go to /cache/ (where the ota zip file is downloaded. To do that I need root access so I got to flash cwm and root it again, fyi) it shows another file, not corresponding to 220.27 but named : Blur_Version.210.12.40.falcon_umts.Retail.en.FR.zip .... which is weird because it's the version that's supposed to be installed already !
I tried something else, found the "Blur_Version.220.27.1.falcon_umts.Retail.en.FR.zip" file on a forum, put it on /sdcard/ and try to install it through recovery... same error.
Does anyone have an idea on how to install it succesfully without having to flash back a stock firmware ?
Thanks a lot to anyone giving a shot, you rock !
Mat
Ps : i tried to find anything similar on the forum but didn't manage to. If i searched with the wrong terms or didn't notice it while browsing trough the different topics, please tell me if you have a clue, and sorry about not having searched well enough.
Found solace here :http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072
Worked perfectly
Sorry for not having searched enough !
Today my apps were acting weird so i went to my superSU and it said
"there is no SU binary installed, and superSU cannot install it. This is a problem!"
Seems like I've tried everything to fix this problem. Flashed stock rom using Odin, reflash CF-root after that. Tried installation custom recovery (can't flash using recovery because my phone is encrypted unless there's a way to by pass that). Used different cords, ports, versions of odins. Still nothing. Had this problem since the morning it's now 8pm here so i decided to ask.
Anyone know how to fix this issue?
Hey, is there anyone who solved the problem ? I got the same issue with my brand new Galaxy S7, quite anoying ...
So have i with my S6. No cure so far, tried everything. Waiting for chainfire to jump in...
Verstuurd vanaf mijn SM-G920F met Tapatalk
I have also just experienced this. Everytime I try to remember root and run root checker it says not rooted.
try root with twrp and a kernel like "adam kernel" or a nearly stock one. Then try flash form recovery supersu 2.74
Ive got the same issue. I have G920i stock 6.0.1 rom and stock kernel and rooted using cf-root. However today i noticed my device is not rooted anymore. Also a week ago my phone completly froze and i had to go to download mode and reboot the device. Im not really sure if this incident was related for the device to become unrooted. Any help is appreciated
Same problem! I rooted my galaxy s7 with cf-root and odin and it worked fine for a while until I got no root privileges and had to reroot it. It worked once more and again - unrooted by itself, only this time rooting doesn't work! it says that it roots it but when I check supersu, it says no SU binary. Please someone help!
same issue
deveice is s6 and china version.
I just bought it one week
wait the solution.
Strange, same thing just happened to me today in Samsung S7. Phone restarted on its own and now no root access. I had it rooted like 2 months ago with Cf and Odin and had been working fine. What happened??
same here , S6 G920F... lost all access from rooted apps tried re-root with odin , also installing supersu again and again , deleted also all the required-rood apps ... nothing works
Hey guys this is already solved. Samsung pushed a security policy update that broke the root. So now the way to go is that you need to flash stock rom with odin. I used smart switch which is easier and worked too. Then after you have stock rom you root using the new cf-auto root by chainfire. Enjoy.
LAUNCHERMONKEY said:
Today my apps were acting weird so i went to my superSU and it said
"there is no SU binary installed, and superSU cannot install it. This is a problem!"
Seems like I've tried everything to fix this problem. Flashed stock rom using Odin, reflash CF-root after that. Tried installation custom recovery (can't flash using recovery because my phone is encrypted unless there's a way to by pass that). Used different cords, ports, versions of odins. Still nothing. Had this problem since the morning it's now 8pm here so i decided to ask.
Anyone know how to fix this issue?
Click to expand...
Click to collapse
This happened to me today, I fixed by restoring to stock using smart switch and then using cf-autoroot to re root.
I had same problem
r00tkiller said:
Hey, is there anyone who solved the problem ? I got the same issue with my brand new Galaxy S7, quite anoying ...
Click to expand...
Click to collapse
Basically I just fixed it by reflashing my ROM straight on top of my old ROM (ressurection remix) I did not wipe cache or dalvik just straight reflashed ROM and it fixed it
Nothing else I tried worked not sure if I will get the same error again but it worked for now
Plus I had error previously with su binary update think this is the cause