Hi everyone,
I received the OTA update notification a long time ago but didn't have time to take a deep look into it (baby on the way... now arrived !), but I'm trying to install a lollipop ota update on my moto g.
It's not my first android device, I had about 10 of them and messed around with them, so don't be affraid to use the vernacular directly, but I'm aware that I might be making a rookie mistake too
My phone is a 1st gen 16Gb Moto G. IT's running 4.4.4 (System version 210.12.40.falcon_umts.Retail.en.FR, I'm in France by the way). I did a few things to it :
- unlock bootloader
- install CWM
- root
- install xposed
- install cerberus and moved it to system apps
Before trying to install it I tried to reverse the steps back to stock :
- move cerberus back to user apps, and uninstall it just in case
- remove xposed
- unroot using the option in the SuperSU menu
- go back to kitkat stock revovery, using mototool v2.6 (so this might a 4.4.2 but I didn't find another one so far)
Then I clicked on the OTA notification, anouncing that 220.27.1... was ready to be installed, downloaded it ok, chose to install it.
Everytime I tried the phone rebooted, began the install and after a short while showed a error message and rebooted.
I tried to install it by putting the OTA zip file in /sdcard and install it with the stock recovery, but here's what I found out :
After downloading the OTA on the phone if I go to /cache/ (where the ota zip file is downloaded. To do that I need root access so I got to flash cwm and root it again, fyi) it shows another file, not corresponding to 220.27 but named : Blur_Version.210.12.40.falcon_umts.Retail.en.FR.zip .... which is weird because it's the version that's supposed to be installed already !
I tried something else, found the "Blur_Version.220.27.1.falcon_umts.Retail.en.FR.zip" file on a forum, put it on /sdcard/ and try to install it through recovery... same error.
Does anyone have an idea on how to install it succesfully without having to flash back a stock firmware ?
Thanks a lot to anyone giving a shot, you rock !
Mat
Ps : i tried to find anything similar on the forum but didn't manage to. If i searched with the wrong terms or didn't notice it while browsing trough the different topics, please tell me if you have a clue, and sorry about not having searched well enough.
Found solace here :http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072
Worked perfectly
Sorry for not having searched enough !
Related
I got a Zenithink C91 with 4.0(it comes out of the box rooted) on it and i bought the superuser elite settings and downloaded superuser 3 beta 4 and tried to flash it onto my C91. Now when ever i open my root only apps it says my device is unrooted a message i wasn't receiving before i tried to install superuser 3 beta 4. Things i've already tried:
1. Flashing it again
2. Installing the APK instead of flashing
3. taking it back to factory default
4. flashing the original version of superuser onto the device.
As it is right now the device works but i would really like my superuser privileges back. If any of you have any ideas i would be most appreciative.
I have dev tools on it if that helps
Sent from my ZT ICS using XDA
Answer
I found the answer. If anyone else has this problem go to the zenithink website and download the newest updates and flash your device it did the trick for me
Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
I started this thread just because of the issue SUPERSU 0.99 brings to HTC One S with Jelly Bean update.
I hope i can help someone because i didnt find any solution to my problem until i flashed superuser and it solved my problem.
shadowch31 said:
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
Click to expand...
Click to collapse
I agree that this adds clutter, but I have been lightly following the threads for the JB ROMs and tried using superuser (though not the rc) without it working (still unable to update system). It's good to have this kind of solution in its own thread but general would probably be a better section.
Sent from my HTC One S Special Edition using xda app-developers app
This doesn't belong in the dev section for multiple reasons
Sent from my HTC VLE_U using xda app-developers app
Im sorry i didnt see that it was Development section. If someone can move it pls do so.
everyone uses SU...... this is very important for everyone using JB... leave it in here...
I feel it belongs here... this is where SU apps are in the development section... SO, this is where it should stay... (that is just my opinion)
I never want to start this thread like an development because im not a developer.
Reason is that i want to share my issue with anyone who is facing the same problem as i did.
Just like i said if someone think this thread doesn´t belong here then admins can move it to right section.
Updated to JB with OTA yesterday night.
Short version:
-Initially rooted with CWM recovery-> flashed MoDaCo stock recovery
-Apply OTA
-Flash CWM recovery
-Used CWM recovery to flash SuperSU 0.99 zip
-Uninstall/reinstall SuperSu from the Market
When starting SuperSU, it asks for update, if agree -> reboot.
BUT
When using root needing apps, like Titanium backup or FX file manager, they ask for root permission through SU and everything runs normally.
So SuperSU seems to work, only the front end app has some bug. I'm staying with that config waiting for an update.
Hi, same problem here on S3 cpu. Is this method works on S3 cpu as well? Thx for replying.
Hi. I think I have a problem with SuperSU (or something else??). I first started SuperSU last thursday (31.1.2013.). It ask me to update binary, I hit OK, and then it took about half hour to restart. System then recovered, and everything seem to be OK, but it's not!
When I connect my HTC One S to PC I only see files created (photos, videos) until 31.01.2013. Also, when I run Settings -> Memory com.android.settings crashes.
What to do?
I'm new to android. Plese help!
bihslk said:
Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Click to expand...
Click to collapse
I'm glad I ran across your thread. It helped me tremendously...
Da Baron
Any idea on how to get SuperSU work instead of SuperUser? I purchased SuperSU in the play store and I think it just looks better...
Brazilian Moto G XT1033, bootloader unlocked, actually using Stock ROM 5.0.2 with Stock Recovery
Hello guys
Well, I was with rooted Stock 5.0.2 ROM 2 days ago, when it notified me that was an update available, so I know that I can't update by OTA with a rooted phone.
I wiped system/cache/dalvik and installed Stock ROM 4.4.4 by ADB+mfastboot for remove the root and be able to update normally.
When the cell started, I updated the "Motorola update service" in Play Store and searched for new updates (Settings > About phone > System updates). A few seconds and it returned the following message: "Check for update was not available at this time. Try again later.".
So, I downloaded the Stock ROM 5.0.2 and installed it by the same way (Wipe > Install by ADB/mfastboot) hoping that it will solve my problem... But it didn't ;(
I did some factory resets, some cache wipes etc and nothing worked for me.
I also installed the stock 5.0.2 recovery again as I saw in a forum topic, but still didn't work.
It is everything right with my phone and network connections.
This message keeps popping up, and I can not update.
Can anyone please help me? Thanks
(Sorry if I had a bad english, still learning...).
@Thales Lima : 1: keep patient, will have update after 1 day or more. If it said: system up to date=> cant update
2: you can download OTA zip file for xt1033, copy to phone( not put in any folder), and check update,it will update manually. Its ok like auto update.
Thanks for replying, thuybang!
I will be patient and wait and see if was a motorola's update server error
And... Where can I find the XT1033 5.1 ROM (zip file) for download?
OTA zip file update 5.1( not ROM 5.1). https://drive.google.com/file/d/0B_JZx92EYN28YUJyT0JmNlJqRWM/view
After download, u change name to : 221.21.56 ( only number), and put in phone...
Whoooa, where did you find it? ^^
Thank you a lot!
------------ EDIT -------------
I pushed the zip file right named to my SD Card (none folder), and looked again for updates, and it returned the same message (Check for update was not available at this time. Try again later.). Can I update using a Custom Recovery > Install ZIP??
------------ EDIT -------------
The first download was corrupted, I guess... I downloaded it again and now I'm with 5.1 installed ^^ (I installed using the method mentioned by you, thuybang)
Buuut... I still can't connect to the update server and check for new updates ;(
If a new update come available for XT1033, I won't get it =/
No,u have to use stock recovery. When u check update,if it not work, go to recovery, choose: apply update from SD card,hope it work.
thuybang said:
No,u have to use stock recovery. When u check update,if it not work, go to recovery, choose: apply update from SD card,hope it work.
Click to expand...
Click to collapse
OK, I already did and now I'm running 5.1, but still with that problem when checking for new updates. I will never be able again to be notified when comes a new update? ;(
Thanks again thuybang! You helped me a lot
Ok. I misunderstand u. Now u update to 5.1 already and cant check update ? Show a screen shot ,pls.
thuybang said:
Ok. I misunderstand u. Now u update to 5.1 already and cant check update ? Show a screen shot ,pls.
Click to expand...
Click to collapse
Yes, you're right
About the screen shots, I tried to send here but the forum said that I can't post external links (images) without at least 10 posts ;(
(Try to open they below >>)
2.bp.blogspot.com/-oBLhsKS8gdU/Ve-oxEQ-74I/AAAAAAAAARQ/Gn3zcvHWD9w/s1600/1.png
1.bp.blogspot.com/-UbzdGTelPpg/Ve-oxPhNkyI/AAAAAAAAARM/H3My2rWas-Q/s1600/2.png
Ok,its fine buddy. Maybe u will get 5.1.1. . if its show : system up to date,u will stop in 5.1.
Because before i got auto update( i got 5.1 by auto update when i check update) ,it also got that mgs. My friend show : system up to date,he have to update manual like u.
So u go to recovery, wipe cached, factory reset ,enjoy 5.1. Dont worry, its nomal.
thuybang said:
Ok,its fine buddy. Maybe u will get 5.1.1. . if its show : system up to date,u will stop in 5.1.
Because before i got auto update( i got 5.1 by auto update when i check update) ,it also got that mgs. My friend show : system up to date,he have to update manual like u.
So u go to recovery, wipe cached, factory reset ,enjoy 5.1. Dont worry, its nomal.
Click to expand...
Click to collapse
Alright, but... Even when I knew that there was some updates available (when I was with 4.4.4), it returned the same message (that hell message saying that couldn't connect to the update server). But it's alright, when comes a new update available I'm gonna install it manually.
Thank you again, thuybang ^^
--------------- EDIT ---------------
Whooa! I think that it really was an update server's fail, now it's normal '-'
Screen shot >>
4.bp.blogspot.com/-xzKW7fPvfQo/VfDdUCk4t-I/AAAAAAAAARo/eJlIn9hBGqI/s1600/3.png
Problem 100% solved, thanks thuybang! <3
Before asking the question, let's give to it a little bit of story:
Basically, i have tried multiple times to pass that damn safetynet, to be able to use some apps like snapchat or banking apps...
i have uninstalled magisk, magisk manager, xposed and busybox. no luck.
So i visited some threads with the same problem, to wich has been suggested to completely reinstall the stock firmware.
As soon as i have read that answer, i immediately downloaded 3 packages needed to install it, called:
update_full_FRD-L09_hw_eu.zip
update_data_full_public.zip
update.zip
Every tutorial lists only two of these packages, the update.zip and the hw one, so i moved them to the sd card, wiped everything but the sdcard and tried flashing them in order, hw first and update in the end.
no luck. the flashing gave me error 7, and couldn't install anything.
I had the backup, so i restored it and didn't have to pass terrible days finding for another solution.
so, basically, from an already stock MIUI 5.0 rom, how do i install the stock firmware for my model?
-Omega
pls answer
guys i really need to make it work, not only because I need it, but because the information on the web is wrong
Hello there.
I'm using tulip for few months now. One of first things that I've done, have been unlocking device, rooting it and put stock rom with root access on it. So far, so good. I did not encounter any serious glitches etc, but now I would like to finally upgrade miui to 11 (currently having 10.3).
And there's my problem. I would love to dodge making clean installation (wipe data etc) and I do not wish to risk to bootlooping my phone. I've read on some threads (older ones, but still) that you cannot simply install ota update in system, because due to changed recovery (I do have TWRP instead of fabric one) you will cause bootloop. I've tried alternative method of installing zip BY twrp, but program says, that it encounter a problem called "package expects build fingerprint (...) of tulip 0/PKQ1.180904.001/V10.3.2.0.PEKMIXM or PKQ1.180804.001/V11.0.2.0; this device has omni_tulip/tulip:8.1.0/OPM8.181105.002/1", and then sait, that in had error 7.
Is it simply wrong rom being installed and I have to choose something that is being named the same way and supports ota, or is there a way to go more swiftly through this process? If so and I should pick rom with ota - what to choose? I like deep level customisation, but compatibility with google store, being able to use store, payments and paid apps, instead of "opening them" by some lucky patchers kind of apps.
OR MAYBE I just need to change recovery from TWRP to something different - like PBRP f.e.? Just like this thread says - https://forum.xda-developers.com/re...how-to-setup-official-miui-breeaking-t3893703
Just a quick update - changing twrp to pbrp does not change anything in upgrade process - still get the same error, now just without telling me, which version do I have.
Also, what's interesting, apparently twrp said to me that I do have android 8.1, but "about phone" in system says, that its android 9 (9PKQ1.180904.001 to be exact).
That's werid, because everywhere I check, phone says "android 9" as a version of it.
Have you tried wiping system and installing?
Nitin Rai said:
Have you tried wiping system and installing?
Click to expand...
Click to collapse
Not yet. I've found method of flashing via PBRB with usage of downloaded file and one option check, but I'm not gonna try it, unless I do a backup of my apps. If that won't work, I'll perform a clean instalation and choose rom that supports ota.
well, I've tried to do this with the method, that I've described before, but this did not ended successfully. I'll look for rom with ota update possibility and then install it most likely. Apps had backup, so I lost almost nothing.
It worked. I had to download bigger patch (1.7 GB, instead of circa 700 MB, that I've tried before), I also had to use method described here -> https://c.mi.com/thread-1782169-1-1.html (pitch black recovery, instead of twrp + one tweak in options). Start after flash was very long (it took like 10 minutes or so), but it booted successfully in the end. Not sure which rom I do have after all, but as far as I remember it was so close to stock, as possible (with only few extra options and tweaks). So yea, it just works.