Hi i know they have developed a root app for V20b but i keep on getting some corrupt installation stuffs. How do i root it?
What is exactly the problem that you can't root?
Can you give the following info?
1. What is the software u used to root it? This?
2. Is your phone in usb debug mode?
3. Do you have the latest LG drivers?
4. Did you also tried other methods to root that maybe damaged some files. (set phone to factory default in this case.)
If those are okay but your problem is not solved. Please make some screen shots of your errors.
This is his problem.
Try to uninstall everything you can.
Yeah try recovery then root again.:beer:
Sent from my LG-P920 using XDA
chandra075 said:
Hi i know they have developed a root app for V20b but i keep on getting some corrupt installation stuffs. How do i root it?
Click to expand...
Click to collapse
Hi I found that megatron script for windows works very well with V20B have not tried it on V21B but apparently it works, all credit to Dan Rosenberg the creator. (I have included the file below)
1. Extract megatron_windows.zip
2. Connect phone via usb and have phone in debug mode
3. Click on the file called "run" once loaded press any key on PC to start the root
4. Phone will restart a few times while installing
5. You have a rooted LG Optimus3d/Thrill
6. THANK YOU Dan Rosenberg the creator
omgomg said:
This is his problem.
Try to uninstall everything you can.
Click to expand...
Click to collapse
so basically i should uninstall my apps? or can i backup my apps, root it and take it back again?
omgomg said:
This is his problem.
Try to uninstall everything you can.
Click to expand...
Click to collapse
pvandepeut said:
Can you give the following info?
1. What is the software u used to root it? This?
2. Is your phone in usb debug mode?
3. Do you have the latest LG drivers?
4. Did you also tried other methods to root that maybe damaged some files. (set phone to factory default in this case.)
If those are okay but your problem is not solved. Please make some screen shots of your errors.
Click to expand...
Click to collapse
1. Yes that software
2. Yes it is.
3. Yes i used the LG update tool to Install necessary drivers.
4. If i set to factory default, i will be downgraded to V10B i think. I did Superclick before. Is it the problem?
chandra075 said:
so basically i should uninstall my apps? or can i backup my apps, root it and take it back again?
Click to expand...
Click to collapse
you can backup them but you still need to remove them after. Also i prefer to do a factory reset. Than you are sure you deleted all that's needed.
Only i'm wondering how many apps you installed i got 38 own installed apps and i rooted mine with no problems (v21b).
Edit: a factory default will not downgrade to early versions when you updated by FOTA or LG-Update tool. I bought my phone With v10b (rooted with superoneclick) later i did original update by FOTA to version v10e (Didn't lost root), Later i updated to version v21b. Do almost every month a factory reset and i never downgraded or lost root by doing that. Only all apps/contact/settings are deleted.
I have a similar problem.
tried to root my p920 with superoneclick and gingerbreak and none of them worked. the Superoneclick stoped at rooting device step #7. stayed there for an hour. I dont know the version of my firmwire ( those v10 or v20 stuff) because i dont know how to see it. Info of my p920 is gingerbread 2.3.5.
thks for helping
droid_er said:
Hi I found that megatron script for windows works very well with V20B have not tried it on V21B but apparently it works, all credit to Dan Rosenberg the creator. (I have included the file below)
1. Extract megatron_windows.zip
2. Connect phone via usb and have phone in debug mode
3. Click on the file called "run" once loaded press any key on PC to start the root
4. Phone will restart a few times while installing
5. You have a rooted LG Optimus3d/Thrill
6. THANK YOU Dan Rosenberg the creator
Click to expand...
Click to collapse
This worked great on my Thrill, thanks!
Related
Hai it sound creazy but i rooted my lg o3d with vipermod primer for asus transformer prime this link http://forum.xda-developers.com/showthread.php?t=1427125, i just downloaded and unzip the file (i use windows xp sp3 32bit), connect my phone to computer (you must have driver for your phone, and in debug mod) and run viperMOD primer tool (it must be connected in internet because will download nacho Root) it will booting 3 times and always ask to install driver just ignor it, and voila your phone is rooted thanks for vipermod primer tool team
ps i 'm not responsable if you brick your phone. this method work for me
ps if shell id not 0 please repeat this method, after root get superuser from market
Hi, your windows are 64bit or 32bit?
my windows is 32 bit
yea http://vipermod.tiamat-dev.com/2012/01/vipermod-primer-tool-for-asus-transformer-prime/
Nive going to try this when i get homr
Sent from my LG-P920 using xda premium
Not working
not working for me.. goes to last step asking uid and sid should be 0 . But its not
I try this method, and do not work, uid and sid are 2000.
can somebody test this
http://forum.xda-developers.com/attachment.php?attachmentid=761956&d=1319631837
and this
http://forum.xda-developers.com/attachment.php?attachmentid=841876&d=1325678726
Problem
Not work... any not Work
I can also confirm, none of the above methods worked, including the OP..
Doesn't work for me either... :-(
Sent from my LG-P920 using xda premium
Try these method for temp root.
In attachment
adixtra said:
Try these method for temp root.
In attachment
Click to expand...
Click to collapse
do not working
I started manually from adb nachoroot.bin, it try to patch some non existent files which are specific to asus (sensor, some config..), i can post later screenshot. With this patch is impossible to root optimus 3d.
If you really rooted it successfully it was one step before viper and viper only copied su, please try to remember what else you tried.
@adiextra Can you make flashable recovery from PC? With this we can easily root phone.
Best Regards.
it shows me that
one thing i remember that i came from v21a rooted, and then i flash with v21b adixtra style (so i already have superuser on it), after that i rooted with vipermod just once and it's rooted easily, it's work for me i have v21b rooted
bnorontako said:
one thing i remember that i came from v21a rooted, and then i flash with v21b adixtra style (so i already have superuser on it), after that i rooted with vipermod just once and it's rooted easily, it's work for me i have v21b rooted
Click to expand...
Click to collapse
Just to be sure before i try, phone is flashed (upgraded firmware on already rooted phone) with this method: http://forum.xda-developers.com/showthread.php?t=1287236 and then after that rooted with vipermod?
yes you can try it, unzip the file from your download in windows ( i use windows xp sp3 32 bit), connect your phone to computer (your computer must have driver for the phone and phone must be in debugmod) run viperMOD primer tool.exe (your computer must connected to internet because will download nacho root), there will be three options choose one for root and hit enter, it will download nachoroot and push automaticly to phone and reboot by itself, wait until reboot complet (if windows ask to install driver just ignored it) by it self will rooting wait you will be ask uid and gid must be 0, check your result if your uid and gid 0 respond yes (if not repead the procedure)now it will rooting your phone and will booting by itself after booting compled your phone is rooted
ps i am not responsable if you brick your phone
pelopicopata1969 said:
I try this method, and do not work, uid and sid are 2000.
Click to expand...
Click to collapse
Got the same. Did not work for me. I gave up on v21b and went to v21a.
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Isn't g3mod prerooted already?
No, Superuser isn't installed. Set Cpu and Titanium Backup can't obtain root acess
There are also many other ways, I've read about it. But I ended at SuperOneClick also. Check this method out (rooting is on 3rd page, but try to take a look at previous, too). I see (from my FF internet history) that I've read it once...
And, please, tell if it worked
T1ll said:
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Click to expand...
Click to collapse
You probably did this since you already used Super one click but I will still ask...
Have you enabled USB debugging mode?
you can use unlock root if superoneclick don't work.for me it's the best for root
I'll write a little guide and you'll see if you forgot any steps...
1.) Activate USB debugging (settings > applications > development > USB debugging
2.) Unmount SD card (settings > sd and phone storage > unmount sd)
3.) Shut down phone
4.) Open superoneclick and connect phone to computer via usb
5.) Click ROOT
6.) When it says waiting for device turn on phone and wait
7.) Superoneclick should show msg "Your phone is rooted"
8.) As soon as it starts up, phone will be rooted and ready
T1ll said:
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Click to expand...
Click to collapse
I would assume none of these steps worked because the same happened to me once and I couldn't do anything
How to fix: make sure debugging is enabled on phone and put it away for now. Uninstall Kies and Samsung drivers and then re-install them. Now simply reinstall Kies and connect phone. Voila, you can now use super one click to root. (Make sure you use 'rage against the cage for old version and auto for new )
I think g3mod is indeed pre-rooted and it isn't recognized bij superoneclick (I think). You just have to install superuser from the market. This works for me. It only takes some time the first time superuser access was asked.
The G3 Mod Kernel is really not rooted
-> http://forum.xda-developers.com/showthread.php?t=1252698
The G3 Mod ROM however is
-> http://forum.xda-developers.com/showthread.php?t=1252719
Easy to mix in mind.
T1ll is using stock ROM with G3 Kernel.
-> no root by default
Cheers
qaysed
T1ll said:
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Click to expand...
Click to collapse
This happends to me too, but I didn't enable USB debuging mod.
I have another probelm with SuperOneClick, as I try to download it my NOD32 antivirus detekts some trojan virus inside, so I would it not recomend anymore!!!
I just rooted my i5800 XXJPS with Unlock Root application.
After I finished with rooting, the instruction was to restart my phone, and than
my phone started to flash white light.
I had to take battery out, and than I started my phone.
It worked, the rooting was succesufull, but I don't now why my phone started to flash???
just give a f*ck to any virus scanner warning on your pc
its an exploit (!), so the virus warnings are consequent
do it or let it be
or
use a CR, they are all (?) prerooted
okan5 said:
This happends to me too, but I didn't enable USB debuging mod.
I have another probelm with SuperOneClick, as I try to download it my NOD32 antivirus detekts some trojan virus inside, so I would it not recomend anymore!!!
Click to expand...
Click to collapse
If you read superoneclick root's xda post, you would know that it would definitely b detected as a virus
Cheers
Sent from my GT-i9003 powered by MIUI
The same thing happened to me,when i was on JPS i rooted my phone easily.The after that i used several Custom Roms,and when i eventually went back to stock JPU the superoneclick apk wouldn't work for me...So i tried Unlock Root tools,and success it worked
yes, i got that problem in JPU too.....just try "rageagainstthecage"
hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/
coolshah said:
hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/
Click to expand...
Click to collapse
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.
Android1993 said:
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.
Click to expand...
Click to collapse
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?
coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?
Click to expand...
Click to collapse
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.
Android1993 said:
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.
Click to expand...
Click to collapse
you can use LG flash tool to flash Bin files , following this guide don't forget to use P925 dll
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html
Re: Official 3D ICS Update! AT&T Resurrects The LG Thrill 4G From The Dead, Gives It
coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
I also had this problem but after about 2 hours i managed to update my phone: here how i did the update:
Just connect to internet then immediately disconnect from internet within 1 or 1.5 seconds the program just needs to confirm that there is an established connection, i used this (my own) trick and I successfully updated my LO3D froyo to GB using kdz
Keep in mind that you need to connect to internet only for 1 second then DISCONNECT internet
Good luck
Click to expand...
Click to collapse
Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
coolshah said:
Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
Click to expand...
Click to collapse
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
Mine was only Power and VOL down , and i reset factory my phone, he can try both way
Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
kupuku said:
Mine was only Power and VOL down , and i reset factory my phone, he can try both way
Click to expand...
Click to collapse
oh my God Thank You Very much man I love you guys thanks foe the tips. you guys saved me.
this method worked: "Power and VOL down" than it asked me for factory reset
well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?
coolshah said:
well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?
Click to expand...
Click to collapse
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs
kupuku said:
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs
Click to expand...
Click to collapse
same no luck i tried the one you posted and the one that came with ics LGP925_V30B_00_CP.fls
still no network
Hope someone can help
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance
tmoca said:
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
to root use this procedure http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
coolshah said:
to root use this procedure
Click to expand...
Click to collapse
What procedure??? I am not sure what you mean?
tmoca said:
What procedure??? I am not sure what you mean?
Click to expand...
Click to collapse
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
coolshah said:
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
Click to expand...
Click to collapse
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me
tmoca said:
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me
Click to expand...
Click to collapse
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot
Root?
coolshah said:
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot
Click to expand...
Click to collapse
This looks like I have to bootload a custom rom and go back to gingerbread? Excuse my noobness you can see I just registered to ask this question. Also load a different baseband from the V30 I am on now?
I finally got ICS and dont want a custom ROM like tmoca asked.
Hello everyone,
Started from D80110C (stock using download mode), rooted, took all the OTAs till D80110G. Then, on top of that, I received another OTA for 300Mb to D80120G . I wasn't sure what it was. I finally decided to takr it. BIG MISTAKE!!! root was gone.
Tried Towelroot and Root25 and Root10, now all failing with D80120G .
So I said, easy, lets go back to stock D80110C. Surprise: download mode is gone. Every time I follow volume key sequence (tried the all) phone shows charging icon instead of download mode.
And recovery mode? only shows Factory Reset (which I already tried...)
I read that some people were able to use the LG Maintenance tool and choose "Update Recovery". Tried that: to me shows "Nothing to fix".
In other words, I'm stuck. Phone works fine (which is great), but I'm afraid I will never be able to do any upgrade since both download method and recovery method seems to be gone. Question is: will the next OTA work?
Any ideas? I read about the Linux method of overwriting the images. Pretty scary, since the phone still works I'd think something else should be available.
It could be worse, the phone is working, still I hate being without options...
Any help would be greatly appreciated. Thank you in advance!
I used stump root today to root my girlfriends g2 with d80120g. link here ----> http://forum.xda-developers.com/lg-g3/orig-development/root-stump-root-lg-g3-sprint-verizon-t2850906
Swagg422 said:
I used stump root today to root my girlfriends g2 with d80120g. link here ----> http://forum.xda-developers.com/lg-g3/orig-development/root-stump-root-lg-g3-sprint-verizon-t2850906
Click to expand...
Click to collapse
Jswagg thanks for the reply.if I use stump,even after a factory reset, I immediately get a rooted message when in reality I'm not rooted. I read that I'm supposed to use the brute force method.how? Again,it says rooted and I see no options....
Thanks again.
franksrental said:
Jswagg thanks for the reply.if I use stump,even after a factory reset, I immediately get a rooted message when in reality I'm not rooted. I read that I'm supposed to use the brute force method.how? Again,it says rooted and I see no options....
Thanks again.
Click to expand...
Click to collapse
After you run stump and it tells you to reboot. After the reboot go to the playstore and install supersu after that you should be all good.
Sent from my Oneplus one using XDA Free mobile app
Swagg422 said:
After you run stump and it tells you to reboot. After the reboot go to the playstore and install supersu after that you should be all good.
Sent from my Oneplus one using XDA Free mobile app
Click to expand...
Click to collapse
No unfortunately stump doesn't say to reboot. It just says rooted. Then I checked with root checker and I'm not rooted.
I believe its a broken root scenario. Anyone knows what to do? Thank you in advance.
Hello I have custom recovery but unrooted on 4.2.2 JB and have ant OTA to KK can I take it or do I need stock recovery?
franksrental said:
Hello everyone,
Started from D80110C (stock using download mode), rooted, took all the OTAs till D80110G. Then, on top of that, I received another OTA for 300Mb to D80120G . I wasn't sure what it was. I finally decided to takr it. BIG MISTAKE!!! root was gone.
Tried Towelroot and Root25 and Root10, now all failing with D80120G .
So I said, easy, lets go back to stock D80110C. Surprise: download mode is gone. Every time I follow volume key sequence (tried the all) phone shows charging icon instead of download mode.
And recovery mode? only shows Factory Reset (which I already tried...)
I read that some people were able to use the LG Maintenance tool and choose "Update Recovery". Tried that: to me shows "Nothing to fix".
In other words, I'm stuck. Phone works fine (which is great), but I'm afraid I will never be able to do any upgrade since both download method and recovery method seems to be gone. Question is: will the next OTA work?
Any ideas? I read about the Linux method of overwriting the images. Pretty scary, since the phone still works I'd think something else should be available.
It could be worse, the phone is working, still I hate being without options...
Any help would be greatly appreciated. Thank you in advance!
Click to expand...
Click to collapse
Time to reply to my thread? A new one click root method for the g3 actually works with any recently otaed g2. Magically able to go in download mode with adb without forcing with volume up and power button (that is not working anymore).#short short long I'm rooted and I did see download mode forced by the bat file....glta
More info
franksrental said:
Time to reply to my thread? A new one click root method for the g3 actually works with any recently otaed g2. Magically able to go in download mode with adb without forcing with volume up and power button (that is not working anymore).#short short long I'm rooted and I did see download mode forced by the bat file....glta
Click to expand...
Click to collapse
It would be great if you replied with more information for those of us still having this problem.
More info
scottjk said:
It would be great if you replied with more information for those of us still having this problem.
Click to expand...
Click to collapse
Yep, I'm currently having the same problem...
I used a root explorer to access the file, it says it can't be deleted because it's read only. Going to superSU on the play store shows that it is installed and shows no option to uninstall. What do I do.
bududubdubdubs said:
I used a root explorer to access the file, it says it can't be deleted because it's read only. Going to superSU on the play store shows that it is installed and shows no option to uninstall. What do I do.
Click to expand...
Click to collapse
hello bududubdubdubs it would be easier to fix your problem if you tell me some details :-
1. mobile brand and model
2. native and upgraded android os
3. the software that you rooted the phone with
Sorry, it's a verizon lg g3. Updated from 4.4.3 (I think) to 5.0.1 and rooted with the one-click root.
bududubdubdubs said:
Sorry, it's a verizon lg g3. Updated from 4.4.3 (I think) to 5.0.1 and rooted with the one-click root.
Click to expand...
Click to collapse
Reroot your device and then uninstall it from within the super su menu.
Newyork! said:
Reroot your device and then uninstall it from within the super su menu.
Click to expand...
Click to collapse
Can't, root process goes through and says it's completed but when I go to SuperSU it still says binary isn't installed.
bududubdubdubs said:
Can't, root process goes through and says it's completed but when I go to SuperSU it still says binary isn't installed.
Click to expand...
Click to collapse
How many times did you try the one click method? I sometimes need to re run it a few times.
You can also try the manual method.
Newyork! said:
How many times did you try the one click method? I sometimes need to re run it a few times.
You can also try the manual method.
Click to expand...
Click to collapse
I tried the one click way like 10 times. The first time I rooted it it worked on the first time, but since the update I have not been able to re-root it. I guess I'll try the manual way.
bududubdubdubs said:
I tried the one click way like 10 times. The first time I rooted it it worked on the first time, but since the update I have not been able to re-root it. I guess I'll try the manual way.
Click to expand...
Click to collapse
Good luck. wish ya all the best. Btw i once saw here that someone reported that he managed to root the G3 with kingroot...
Is ioroot the manual way? Because if it is it doesn't work on my version firmware.
Newyork! said:
Good luck. wish ya all the best. Btw i once saw here that someone reported that he managed to root the G3 with kingroot...
Click to expand...
Click to collapse
I tried kingroot, didn't work at all.