Database Info

My car mount solution!

I know this has probably been posted over at other forums but I'll make a short review here.
I recently purchased Exogear's Exomount through Amazon ($19.99 and free 2-day shipping with Prime) and I'm absolutely amazed by the product's versatility/performance. The suction cup is made out of silicone and feels a bit sticky to the touch. It adheres to the windshield (or almost any flat surface, including dry-wall) effortlessly and that's even before applying the lock mechanism. The neck can pivot 360 degrees which means you can set your phone in portrait or landscape mode quickly.
The main selling point for me was that instead of using a cradle, it's simply an oversized 5" clip with polyurethane grippers on each of the clip ends to provide a firm non-abrasive grip on the device it's holding which is "EXCELLENT" for people who don't really like taking the phone case off everytime mounting is needed. IT WORKS GREAT WITH ANY CASE ATTACHED!. Just make sure the clip isn't gripping the volume rocker and you're good to go. The mount is not as clunky as most of the universal cradels sold online that look ridiculously oversized. I have attached and tested my girlfriend's iPhone 4 with and without a case, a garmin nuvi GPS, my Inspire 4G with and without a case and my old iPod video without any detachments from the suction cup or the clip itself. It leaves enough clearance for the camera to be free of any obstacles in case anyone wants to record video while driving. The website and some youtube videos also show it being used as a car mount for iPads and a lot of other tablets.
Bottom line: Great mount for anyone who wants to use a simple universal design compared to numerous propietary ones and attach many devices to it, even ones with protective cases/skins attached.

Thanks! Hadn't seen it before. I've always done just fine with my phone on my leg while using GPS, and didn't see the need to throw money at some clunky bulky phone holder, or an expensive one that I'd only be using for this phone..
That youtube video sold me. So versatile in what it can hold and where it can mount... I just ordered one and signed up for that month trial thing for the free shipping.
Thanks for posting about this!

GTIVRon said:
Thanks! Hadn't seen it before. I've always done just fine with my phone on my leg while using GPS, and didn't see the need to throw money at some clunky bulky phone holder, or an expensive one that I'd only be using for this phone..
That youtube video sold me. So versatile in what it can hold and where it can mount... I just ordered one and signed up for that month trial thing for the free shipping.
Thanks for posting about this!
Click to expand...
Click to collapse
Glad I was able to help, dude =D
Yeah, I'm loving this mounting kit. I actually ordered another one for my girlfriend's car 'cause her gps mount keeps on popping off. Let us know how you like it when you get a chance to have a hands-on test.

It will get delivered wednesday. I'll mount it up on my commute to work thursday morning. Some harsh roads and my car is pretty damn stiff suspension. If it holds up to that one roads beatings I'll be damn impressed.

This is pretty awesome! I may see if I can return the mount I just bought (I saved the reciept....the GPS mounts that hold the phones always loose tension in the springs) and get this one!

I use a mount by Mountek, really a superb product that mounts in a CD slot. Let us know how you like the exomount!

Exomount - Day 4
Today would be the 4th day I've used the Exomount. The clip works adequately and holds the phone in place even with the cover on. The suction cup has yet to fail me even in high temperature weather with the sun beating on it and I even used it on my girfriend's car for around 8 hours, and back on my car it stuck in place like it was just used for the first time. There's some vibration when recording video while driving but that's cruising at 60MPH over somewhat bumpy roads. I didn't expect this mount to be a tripod or anything like that, especially for the price I paid. It works as it should and beyond and I'm more than pleased with its performance thus far.

I have the GoPro Hero cam for recording out the window so I won't need this mount for that. Just want it to hold my phone in view. I tend to forget it's on my lap a lot and get out of the car and bam. (CaseMate Tough is awesome though)
My car's down, again, right now. I'll be picking up parts after work today and hopefully get the car back together tonight though. Mount is suposed to be delivered today so I'll post my opinion on it tomorrow hopefully.

OK.
So the mount is awesome! I love the fact that I can mount this on my MK4 GTI's dash!. Anybody with a MK4 VW knows what the surface of the dashboard looks/feels like.. it's pretty textured, but the mount holds on it!
With my cars very stiff suspension and the ****ty roads of texas, the phone does shake/vibrate a good bit, but what I need to see is legible in navigation. But I won't be able to read a text msg on it. The elbow is flexible enough to move with one hand, but holds strong enough to stay how you set it, which is awesome (It doesn't start "rotating" forward/down). And the fact I can keep my phone in it's case and easily just twist to make it portrait or landscape is great.

son_of_nel said:
I use a mount by Mountek, really a superb product that mounts in a CD slot. Let us know how you like the exomount!
Click to expand...
Click to collapse
I got that one too, I love it. Also got a 6 inch audio cable with 90s on both ends and a 12 inch usb cable and flush usb charger for the cigarette lighter. clean installation with no long cables hangin in the floorboards or tangled around stuff.

I am using a mount called The Clingo. It is awesome and works with anything. Just picked it up a month ago.

I've been using an Arkon mount since around Christmas; no problems at all! Good suction, quick release works well. Only issue I've seen is if I hit the charger cable with the stick shift it will tend to trigger the quick release and pop the phone out. That's more an issue of the power cable not having a quick release than a knock to the mount though.
It also came with a dashboard vent mount, but I've not used that since trying the windshield mount. Either my vents aren't very sturdy, or the mount+phone weigh too much, but it would just slide down and then fall out. The clips are adjustable, but I couldn't make them work with my vents.
This model I have is the Arkon SM410 Universal Mount.

Combine cd slot car mount, with EVO 4G LTE Dock

Okay so I purchased universal cd slot mount from Mountek. Then I purchase the suction cup mounted Sprint HTC EVO 4G LTE car mount. When docking it, as you all know, the Car App starts. Undock, exits car app. This placement is the ultimate set up for me. It's not finished I still have to get a more permanent solution for the ball and pinion mechanism. May not be until Monday
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So basically, you cut of the ball section of the suction cup mounted, get a self taping screw, washers and screw the ball to the Mountek and call it good. Straight forward, took about 15 minutes once the plan was formulated. Any questions, let me know

[email protected] said:
Okay so I purchased universal cd slot mount from Mountek. Then I purchase the suction cup mounted Sprint HTC EVO 4G LTE car mount. When docking it, as you all know, the Car App starts. Undock, exits car app. This placement is the ultimate set up for me. It's not finished I still have to get a more permanent solution for the ball and pinion mechanism. May not be until Monday
View attachment 1116547
Click to expand...
Click to collapse
pretty sweet , i already have the mountek , may grab the dock now.

Haha I love it, great idea. I just ordered my Mountek today, will probably be checking this out in the future.

[email protected] said:
Okay so I purchased universal cd slot mount from Mountek. Then I purchase the suction cup mounted Sprint HTC EVO 4G LTE car mount. When docking it, as you all know, the Car App starts. Undock, exits car app. This placement is the ultimate set up for me. It's not finished I still have to get a more permanent solution for the ball and pinion mechanism. May not be until Monday
View attachment 1116547
Click to expand...
Click to collapse
So the slot will not just mount to the dock? It is hard to tell from the pick.

Yeah, I'll be doing some work to it later. The mounts don't line up. The Mountek has a small hole that the original universal cradle mounts to. The new dock has a larger ball and pinion set up. The pinion has a larger od, so the "sleeve" part of the system is to wide and too short to go through the place provided by the mount. Luckily I work at a plant with a machine shop, sheet metal shop and a pipe / fab shop right next to my office. I am going to see what ideas these guys have. I have it Jimmy rigged right now, (my name is Jimmy) it should hold but it has no real movement other than spinning. It is in fact AWESOME, for me even in it's current state. Updates coming this week.
Sent from my HTC One X using Tapatalk 2

Thanks I really like this idea.
From my tricked out EVO 4G LTE

Thanks, glad you like it.
Sent from my HTC One X using Tapatalk 2

Which windshield suction cup EVO 4G LTE mount is that? Where can I find it. Does it fit the HOX perfectly?

JoTeC said:
Which windshield suction cup EVO 4G LTE mount is that? Where can I find it. Does it fit the HOX perfectly?
Click to expand...
Click to collapse
It's the one your can purchase at the Sprint store. It has an insert in it that is made to be pulled out if you want to use it with a case on your phone. I have the orange HTC case on my HOX, without the insert it fits great, little play but the padded arm fixes that. The usb jack is about an 1/8 of an inch too long. Simple fix, add a small amount of cushion on the right side to balance it out... I love it. Go give it a try, $35 with a 14 day return, you can't lose.
Sent from my HTC One X using Tapatalk 2

Really cool idea, I might try it out. Mind linking the car dock you bought? Just wanted to make sure I don't buy the wrong one.

tizzie said:
Really cool idea, I might try it out. Mind linking the car dock you bought? Just wanted to make sure I don't buy the wrong one.
Click to expand...
Click to collapse
http://shop2.sprint.com/NASApp/onli...RefName=Car+Kits&selectedAccessoryID=KPH6886V
There you go, it's still a work in progress, but it is really nice. When I get it where I want it, I will update you guys
Sent from my HTC One X using Tapatalk 2

Updated with pics, pretty straight forward after giving it some thought. Took about 15 minutes once the plan was formulated.
Sent from my HTC One X using Tapatalk 2

Could you tell me the diameter/how big the suction cup is on the EVO LTE car dock? I really don't want to mount it to my windshield because it would be too awkward to reach for it, but i have a nice flat surface on my radio area (http://www.fatalfoo.com/pics/Cars/Prius/Kenwood in Prius1.JPG) between the CD slot and the source buttons and hope it will stick on there. Do you think that would work?

I doubt it,I had the same idea, the suction cup is about a 2 inch diameter.Just barely too large
Sent from my HTC One XL using Tapatalk 2

Does the Sprint dock work with the speck black and white case?
Sent from my Nocturnal HOX

JamesR913 said:
Does the Sprint dock work with the speck black and white case?
Sent from my Nocturnal HOX
Click to expand...
Click to collapse
Dont have the case to check, but it definitely works with cases. just not sure of the extremes... I would suggest checking your local sprint shop. I would give it 85% chance of working though.

[email protected] said:
I doubt it,I had the same idea, the suction cup is about a 2 inch diameter.Just barely too large
Click to expand...
Click to collapse
I stopped by the Sprint store and picked up the car dock and HTC car stereo clip. The phone gets really hot when using the car dock and after the first day I can't get the phone to charge while docked. Sometimes the blue light on the dock is on and sometimes its flashing. The orange charge light on the phone will only flash and I even got a warning pop up that the charger is not compatible and may damage the device. Works fine when the same charger is plugged directly into the phone without the dock. I also tried connecting the car dock to the AC charger that came with the phone (plugged into an inverter) and got the same results.
The suction cup was too large for the flat surface on the radio and would not stick.
I just ordered the ProClip part #853437 Prius center mount and part #215165 Garmin Nuvi ball mount adapter. We'll see how that goes.

Update: Just to let you guys know the speck case does work with the Sprint dock.
Sent from my Nocturnal HOX

ilusnforc said:
I stopped by the Sprint store and picked up the car dock and HTC car stereo clip. The phone gets really hot when using the car dock and after the first day I can't get the phone to charge while docked. Sometimes the blue light on the dock is on and sometimes its flashing. The orange charge light on the phone will only flash and I even got a warning pop up that the charger is not compatible and may damage the device. Works fine when the same charger is plugged directly into the phone without the dock. I also tried connecting the car dock to the AC charger that came with the phone (plugged into an inverter) and got the same results.
The suction cup was too large for the flat surface on the radio and would not stick.
I just ordered the ProClip part #853437 Prius center mount and part #215165 Garmin Nuvi ball mount adapter. We'll see how that goes.
Click to expand...
Click to collapse
You may have a bad unit, Mine works flawlessly with my Kenwood stereo powering it,I would return and see if you have a bad unit

this is awesome. will definitely have to try this

[Q] Car mount (specific needs)

I'm looking for a car dock for my Note 4.
Looking at all the existing threads (yes, there are several), the most recommended options seems to be
iOttie One Touch XL
iOttie One Touch 2
iBolt xProDock
But none of them seems to fit the bill for me. I've got a bumper case on my phone, and with the case it's about 3.35 inches wide. The Touch XL only supports phones up to 3.3 inches and the Touch 2 only goes to 3.2 inches. The xProDock seems to be able to handle the size of my phone, but it looks to be designed for holding the phone in landscape mode. I much prefer portrait mode for GPS navigation. I also want something that mounts to a RAM ball mount, which the xProDock does.
So, does anyone have any recommendations for a dock that attaches to a RAM ball, is made for portrait mode and can hold my 3.35 inches wide phone?

Spigen case + iOttie XL
I currently am using the Spigen case and the iOttie XL. According to Amazon, my case makes the phone 4". I'll go and try to measure how wide the mount actually gets later today, as that exta .15" may not matter in your case.
BTW, the suction mount from iOttie is a beast. I'm not sure how I'd get it off if I needed to. It's very stuck to my dash.
YMMV.

I have a Note 4 with Tech21 case. I use this in my car....
http://www.verizonwireless.com/accessories/vent-adhesive-combo-mount/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not sure what size your RAM ball is. I have a RAM mount setup for my xoom but I have never actually checked to see if it would fit but I think the RAM ball for the tablet mount is bigger.

The craigsdock will meet all your needs now and for future phones. Google it.

wingmanjd said:
I currently am using the Spigen case and the iOttie XL. According to Amazon, my case makes the phone 4". I'll go and try to measure how wide the mount actually gets later today, as that exta .15" may not matter in your case.
Click to expand...
Click to collapse
Please do measure it Thanks
goinovr said:
I have a Note 4 with Tech21 case. I use this in my car....
http://www.verizonwireless.com/accessories/vent-adhesive-combo-mount/
Click to expand...
Click to collapse
That looks good. How wide is your phone with the Tech21 case? Do you know anywhere else to buy that mount? Need to find someone who would ship it to Sweden...
goinovr said:
Not sure what size your RAM ball is. I have a RAM mount setup for my xoom but I have never actually checked to see if it would fit but I think the RAM ball for the tablet mount is bigger.
Click to expand...
Click to collapse
I don't actually have a RAM mount yet, but I was thinking standard B-size. But that adhesive mount that comes with the dock you linked might be good enough
CZ Eddie said:
The craigsdock will meet all your needs now and for future phones. Google it.
Click to expand...
Click to collapse
Wow! That thing is a tank! But $70 is outside of my budget

tlundberg said:
Wow! That thing is a tank! But $70 is outside of my budget
Click to expand...
Click to collapse
Understandable. But you buy one dock and it lasts forever.
I bought mine back when I had my S3.
Then used that same dock with my S4, Note 3 and now my Note 4.
It's so adjustable that it even worked with the Note 3's MicroUSB port that is set off to the side rather than right in the middle.
And I'll be using it with any other 4" to 6" phone that happens to have a MicroUSB port on the bottom.
Money saved in the long run. :good:

i use an iblason armorbox which is slightly wider than your measurements and the itian wireless charger fits perfectly including charging with the samsung oem wireless back inside the armorbox case. try that.

tlundberg said:
I'm looking for a car dock for my Note 4.
Looking at all the existing threads (yes, there are several), the most recommended options seems to be
iOttie One Touch XL
iOttie One Touch 2
iBolt xProDock
But none of them seems to fit the bill for me. I've got a bumper case on my phone, and with the case it's about 3.35 inches wide. The Touch XL only supports phones up to 3.3 inches and the Touch 2 only goes to 3.2 inches. The xProDock seems to be able to handle the size of my phone, but it looks to be designed for holding the phone in landscape mode. I much prefer portrait mode for GPS navigation. I also want something that mounts to a RAM ball mount, which the xProDock does.
So, does anyone have any recommendations for a dock that attaches to a RAM ball, is made for portrait mode and can hold my 3.35 inches wide phone?
Click to expand...
Click to collapse
http://www.amazon.co.uk/gp/product/B00OH4QPFO
I got that and never looked back
I struggled with a clip in mount for ages until I stumbled upon the magnet one above, would never go back

tigsandmitch said:
http://www.amazon.co.uk/gp/product/B00OH4QPFO
I got that and never looked back
I struggled with a clip in mount for ages until I stumbled upon the magnet one above, would never go back
Click to expand...
Click to collapse
I'm not sure how well a magnetic mount would work since I don't have a flat back. (I'm using a bumper case)

zurkx said:
i use an iblason armorbox which is slightly wider than your measurements and the itian wireless charger fits perfectly including charging with the samsung oem wireless back inside the armorbox case. try that.
Click to expand...
Click to collapse
Wireless charging would have been awesome if it worked for me... Unfortunately it doesn't My bumper case raises the back of the phone too far away from the charger. I've got a Samsung wireless charger on my desk, but it just doesn't work with the bumper on the phone.

so change your bumper case to an iblason armorbox.

tlundberg said:
The xProDock seems to be able to handle the size of my phone, but it looks to be designed for holding the phone in landscape mode. I much prefer portrait mode for GPS navigation. I also want something that mounts to a RAM ball mount, which the xProDock does.
Click to expand...
Click to collapse
I use the xProDock and it can be used in either landscape or portrait. It'll rotate 360 degrees. I also like that you can select which side of the dock you want the power cord to route.

nytmare1 said:
I use the xProDock and it can be used in either landscape or portrait. It'll rotate 360 degrees. I also like that you can select which side of the dock you want the power cord to route.
Click to expand...
Click to collapse
How secure do you feel it is in portrait mode? I'm worried that the phone will eventually slide out since there's no support on the bottom in portrait mode. How natural does it feel to insert the phone in portrait mode? It just feels like it was mainly built for landscape use...

tlundberg said:
How secure do you feel it is in portrait mode? I'm worried that the phone will eventually slide out since there's no support on the bottom in portrait mode. How natural does it feel to insert the phone in portrait mode? It just feels like it was mainly built for landscape use...
Click to expand...
Click to collapse
I would agree that the xProDock lends itself to be used primarily in landscape mode and it's easier to mount your phone into the dock in that position. However, the double spring-loaded upper latch is VERY strong and holds my Note 4 quite securely. Ironically enough, if I had one critical thing to say about the dock, it's that the mount holds the phone in too tightly. Until you get the hang of it, it's kinda hard to get the phone into the mount to begin with. There's a certain technique to getting it in and out, but once you get use to it, it's not so bad. If you get this dock, I can't imagine you'd have any problems with the phone slipping out in portrait mode.
Just be aware that Samsung removed the analogue audio out through the microUSB connector (for the Galaxy S5 and the Note 4) so the aux-out cable is not compatible with this kit. iBOLT recommends the IBXC-33617 xProDock Connect Kit if you desire that feature. Don't quote me, but I don't think that's an issue if you source your audio through the earphone jack or Bluetooth.

tlundberg said:
I'm not sure how well a magnetic mount would work since I don't have a flat back. (I'm using a bumper case)
Click to expand...
Click to collapse
The bumper case might present a problem. I would highly recommend finding a magnetic mount that carries the note 4, and getting a case that has a back. That would seem to be your best option.

I sincerely apologize for the delay. My case on my phone is 3.3" (not the 4" I said earlier). The XL opens to 3.5". There's not a lot of extra leeway, but more than enough to snugly hold my phone and case.
Hope this helps.
Sent using XDA Free mobile app

Anyone get a dock off ebay? those chinese knockoffs
http://www.ebay.com/itm/131295119396?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

sah0724 said:
Anyone get a dock off ebay? those chinese knockoffs
http://www.ebay.com/itm/131295119396?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
As opposed to what? Why pay more when you can get an cheap one from china that works just as well.

Car Mount Reccomendations?

Anyone found a car mount that works well for the V10? I don't care for the suction ones. I prefer ones that attach to the consol instead. Thanks.

mine looks like this http://www.ebay.com/itm/Universal-Car-CD-Slot-Mount-Bracket-Holder-for-iPhone-Cell-Phone-GPS-Rotatable-/311212169712?hash=item4875b0d9f0:g:S0QAAOSwiCRUicp~ But i have a F150 and don't really have a standard clip for the vent like in my wife's car.

Mountek Snap2 is probably the best all- around unless you need the cd player.
Sent from my LG-H901 using Tapatalk

PhoenixPath said:
Mountek Snap2 is probably the best all- around unless you need the cd player.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
I love this one...but how does the magnet work if I don't use a case...which I don't plan on doing with the V10.

mowrer98 said:
I love this one...but how does the magnet work if I don't use a case...which I don't plan on doing with the V10.
Click to expand...
Click to collapse
Might be able to put it inside the back cover. Not sure about how well that would fit though.
...no case. Sheesh.
Sent from my LG-H901 using Tapatalk

PhoenixPath said:
Might be able to put it inside the back cover. Not sure about how well that would fit though.
...no case. Sheesh.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
I put mine inside the cover and it's fine. Most cases are really thick in the back and the magnet doesn't work very well. It actually works really well without a case. If you do get a case make sure it's a thin case otherwise the magnet won't stick.

Magnetic mount
I've been using a magnetic mount I purchased at best buy. It came with a large and small plate. I currently have the large plate under the battery covert right on the battery and the bulge is minimal if not non existent. Fits perfectly and sticks to my holder without issue. Magnetic is the way to go lately with all the different size phones, plug layouts are different between manufacturer and the ability to go landscape or portrait at will is a must now.

I bought a cheap TPU case for $1.29 that I keep in my car just for mounting. I place the magnet between the phone and the case.

I like the mountek snap mounts, but I don't have a cd-player slot. Well, I do, but it's behind a 7" display. Does anyone know of a good magnetic mount that doesn't mount with suction cup, cd player, or vent? I'm hesitant to use the ones that mount on the vent, as I'm worried it may break off part of the vent, not sure if this really would be a problem though, just seems like it could.

Xtremeguard has a couple car mounts and right now running a 90% off code "GIANT90" sitewide free shipping. I have the smaller suction cup one, it shakes with big phones. I might try the vent and longer neck versions.

mowrer98 said:
I love this one...but how does the magnet work if I don't use a case...which I don't plan on doing with the V10.
Click to expand...
Click to collapse
I put magnet inside behind cover Work perfect

I just grabbed the braketron si magnetic mount from best buy. I like it because it has an adjustable stand below the magnet to help keep the phone steady. It's a suction mount, but it's the soft sticky kind of suction. I used a damp cloth on a sloped part of my dash and it hasn't moved since I mounted it. The larger plate fits inside the back cover perfectly and the mount holds the phone very securely. I even tested it on some really rough roads locally and the phone never moved.

I typically purchase my vehicle specific Car mounts from Proclip USA and then just go with the magnetic iOauto Mount.
http://www.amazon.com/ProClip-iOauto-Suction-Travel-Locking/dp/B00NG3G6U6
http://www.proclipusa.com/mobile-de...product/ioauto-pro-magnetic-mount-710305.cmsv
They are not the cheapest but are REALLY REALLY strong.

I have a magnetic one. It keeps things clean. It goes into the air vent, and you can put magnet (included) on your case or something and the phone snaps in. It has been convenient with any phone. V10 or note 5. I'd highly recommend it.
http://www.amazon.com/WizGear-Unive...pebp=1447690805019&perid=1DDYJXFD9D0E4QM87VR8

Ordered the magnetic one from the xtremegaurd site or whichever it is when someone posted the 90% off.ended up being like 12$ for 2. Goes in the air vent and so far has worked well.
Sent from my non-Mega loved v10 H901.

1SiK1500 said:
I typically purchase my vehicle specific Car mounts from Proclip USA and then just go with the magnetic iOauto Mount.
http://www.amazon.com/ProClip-iOauto-Suction-Travel-Locking/dp/B00NG3G6U6
http://www.proclipusa.com/mobile-de...product/ioauto-pro-magnetic-mount-710305.cmsv
They are not the cheapest but are REALLY REALLY strong.
Click to expand...
Click to collapse
There's a warning on the manual that says not to use the product with any phones that use flip cases that can cause the device to go to sleep like the G3, M8, and a few others.
I know you can probably turn off the case detection in the settings, but makes me kinda iffy on it.

redneck_666 said:
There's a warning on the manual that says not to use the product with any phones that use flip cases that can cause the device to go to sleep like the G3, M8, and a few others.
I know you can probably turn off the case detection in the settings, but makes me kinda iffy on it.
Click to expand...
Click to collapse
If I place the phone on the mount off centered to the right it does lock the screen, but if I center it, I have no issues with the magnet turning the screen off. I just turned off the setting until lg comes out with the quick window case.

I use this one because it's much less of an eyesore than the others.
http://www.amazon.com/gp/product/B00I608BJ8
I attached the metal plate to the battery. The cover still fits on, and NFC still works.

Koomus CD-Air CD Slot Smartphone Car Mount Holder Cradle
I've tried many brands and styles of Smartphone Car Mounts and have settled on a new favorite the Koomus CD-Air CD Slot Smartphone Car Mount Holder Cradle. If you don't mind using your CD Slot for mounting your smartphone it's a great choice and available on Amazon for $19.99.
It's the small things that really make this mount a pleasure to use compared to other similar mounts. The mount is very secure and extremely easy to use. You insert the end of the mount into your cd slot and you can use the included attachable clips to adjust the thickness of the end for a perfect fit. Its not a one size fits all affair like some of the other mounts I had tried.
The stretchable holder expands from 2.16" to 3.42 to accommodate most phones without a problem it holds my LG V10 and Nexus 6 without a problem. The holder has a rubber bumper on the jaws of the holder to protect the phone from scratching while inserted into the mount. The holder uses a ball joint that allows for 360 degree of movement so you can mount the phone securely in both horizontal or vertical orientation.
Since I use polarized sun glasses I have to mount the LG V10 vertically in order to see the screen with my sunglasses on and I haven't had to worry about the phone falling out of the mount even though the V10 is a very tall phone. The holder jaws have sufficient tension and with the addition of the rubber padding it's made for a slip free installation.
I've saved the best for last the one touch easy mount lever that fits flush with the body of the mount! On other mounts I had tried the mounting hardware hung underneath the mount which partially obstructed the view screen of the head unit mounted in my vehicle. The flush mounted lever on the Koomus doesn't interfere with the on-screen controls of the head unit or the view of the backup camera when operating the vehicle a huge plus.
I don't have any photos of my installation but I'm including a couple provided by the manufacturer. I'm very happy with the Koomus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/gp/product/B00HRKI5V2?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01

gheymann said:
Since I use polarized sun glasses I have to mount the LG V10 vertically in order to see the screen with my sunglasses on
Click to expand...
Click to collapse
Thanks for the recommendation, gheymann. I also have polarized lenses on one of my pair of shades but I haven't had to wear them since I got the V10. I was wondering though, is the screen on this phone made of polarized glass - can it not be viewed from certain angles if one is also wearing polarized lenses?

Car Mount recommendations please

I'm looking for a couple of mounts I can use in our cars. I would like universal ones that both me and my wife can use (she's just inherited my G3).
I like the idea of the magnet ones like this Look at this on eBay http://www.ebay.co.uk/itm/291750206879 but I don't know how good they are.
Thanks

TylerDurdenK said:
I'm looking for a couple of mounts I can use in our cars. I would like universal ones that both me and my wife can use (she's just inherited my G3).
I like the idea of the magnet ones like this Look at this on eBay http://www.ebay.co.uk/itm/291750206879 but I don't know how good they are.
Thanks
Click to expand...
Click to collapse
i wouldnt rely that much on magnet ones. Unless you have a very thin cover (which i also dont recommend). If you have to break all of the sudden it falls. I personally use this type of Universal mounts:
http://www.ebay.com/itm/Liger-Unive...134995?hash=item3f64350153:g:6dUAAOSw1DtXJAlt
But mine is black completely.
It allows you to charge the device at without compromising position, it also allows you to rotate it 360 and more than just rotate it you can actually move it like the mirrors of your car. It has some protections to protect your car, your phone, and to prevent the phone from falling. And it can hold up to a 7" width phone. I think that even i bit more than 7 inch. I dont know if the one i sent in the link is the exact same one im using however it looks exactly the same. the hard sponge in each side allows you to implement pressure on the sides that will prevent the phone from falling. You can pretty much adjust everything to your liking with this mount. I dont know about others similars to this one but this one has been for me the best out of all i have tried.
It also should work on any vents of any car. The reason i dont like the magnet ones is because it usually requires for you to paste a sticker and it limits yourself to only the devices who have the sticker. However, what happens when your phone is dead and for example your friend has his phone and he/she lend it to you to put the gps or put music?
Of course, try to find one that is closer to your location if you want to pay less, or from Asia.

joseguillen1994 said:
iUnless you have a very thin cover...
Click to expand...
Click to collapse
I'm using a generic 'air vent' style magnetic mount, with the metal plate gaffer taped (duct tape in US?) inside a 'Spigen Rugged Armor' case and it sticks/works fine. Done several long journeys over 'normal' european journeys (i.e. roads with no offroading).
Will be dependant on model, common sense and not driving like a ****, obviously...

gurningchimp said:
I'm using a generic 'air vent' style magnetic mount, with the metal plate gaffer taped (duct tape in US?) inside a 'Spigen Rugged Armor' case and it sticks/works fine. Done several long journeys over 'normal' european journeys (i.e. roads with no offroading).
Will be dependant on model, common sense and not driving like a ****, obviously...
Click to expand...
Click to collapse
yeah but since we dont know how anyone drives until we see it, i cant say how he drives. Also, the cover you are talking about is slim in comparison to what im talking about. Of course, he is on his liberty to buy the magnetic one. Everyone has different experiences with different mounts. LOL. I personally have tried 4 and none of them worked as good as the one i bought last. Also, in many occasions im driving with people that lend me their phones for multiple reasons. (that is my case only). And my saying is better to be prepared than sorry for every single thing.

joseguillen1994 said:
yeah but since we dont know how anyone drives until we see it, i cant say how he drives. Also, the cover you are talking about is slim in comparison to what im talking about. Of course, he is on his liberty to buy the magnetic one. Everyone has different experiences with different mounts. LOL. I personally have tried 4 and none of them worked as good as the one i bought last. Also, in many occasions im driving with people that lend me their phones for multiple reasons. (that is my case only). And my saying is better to be prepared than sorry for every single thing.
Click to expand...
Click to collapse
Agreed - this is very much a case of suck it and see. Just saying that this particular generic version works fine in normal driving conditions with a entry branded 'rugged' thickness case, rather than a thin one. If you are likely to mount curves or drive on particularly bumpy tracks experiences may differ.

Thanks for the input guys.
Currently I'm using a Poetic Atmosphere case. So I'm assuming it's pretty thin. I might give the magnet option a try.

For me, it is almost always Brodit, have a look at these. I have a Brodit ProClip installed in my car, and instead of Brodit device specific holder, I have installed Herbert Richter adjustable holder set up onto Brodit ProClip as I have more than one device.

TylerDurdenK said:
Thanks for the input guys.
Currently I'm using a Poetic Atmosphere case. So I'm assuming it's pretty thin. I might give the magnet option a try.
Click to expand...
Click to collapse
Good luck! And your welcome

I've gone for this.
Car Mount Holder, LanshionTM Universal MagGrip Air Vent Magnetic Car Mount Holder&Cradle for Apple iPhone 6/6 Plus, iPhone 5S 5C 5 4S 4, Samsung Galaxy S6 S5 S4 S3,Galaxy Note2/3/4,Nexus 5 4 and All Smartphone (Black) https://www.amazon.co.uk/dp/B013ACUCZW/ref=cm_sw_r_cp_apa_UN.wxbEAMJSF3
I'll let you know how it goes.

I've always disliked having things in the way of my view, I had a hard time finding a mount I liked and the wouldn't be too distracting while driving. I ended up getting a Cellet cup holder mount and I love it. Definitely keep it in mind if you're still looking around.

Hi all.
I too am after a good car mount. I have just come from the G3, and used a Kidigi "clamp" style car mount. Specifically fitted for the G3. Even if you had a case on your phone, you could remove a part of the product and it would fit snug as a bug inside whatever that saying is... Sadly they do not make any for the G5. Here's the G3 one if interested to see:
http://www.gadgets4geeks.com.au/kidigi-car-mount-charging-cradle-for-lg-g3
As you can see, it has the clamp on one side only. A much better design this way I think.
Anyways, the closest they have is this universal one (with a USB Type C charger): http://www.kidigi.com/index.php?route=product/product&productlist_id=7&product_id=120#.V81GIPl9670
I'm really bummed there's no car mount specifically for the G5 out there. If anyone finds one, please post it!
I think I'm going to end up going for a universal clamp style for the windscreen / windshield. I don't like the magnet kind, nor the ones that sit on the car vents.
---------- Post added at 10:01 PM ---------- Previous post was at 09:42 PM ----------
Esspee_London said:
For me, it is almost always Brodit, have a look at these. I have a Brodit ProClip installed in my car, and instead of Brodit device specific holder, I have installed Herbert Richter adjustable holder set up onto Brodit ProClip as I have more than one device.
Click to expand...
Click to collapse
So far I like this the best. Do you know how the G5 WITH the Hi-Fi Plus module would fare in this mount? Also, I am guessing the G5 cannot have a case on while in this mount, right?

invertedskull said:
Hi all.
So far I like this the best. Do you know how the G5 WITH the Hi-Fi Plus module would fare in this mount? Also, I am guessing the G5 cannot have a case on while in this mount, right?
Click to expand...
Click to collapse
I have the Spigen case with the HR mount and it works great. Downside is the USB needs plugged in every time vs my Brodit active charger for M8. Saying that the flexibility of the HR outweighs the hassle of plugging in the USB cable. The HR mount is an universal which is spring loaded to grip multiple phone shapes and sizes. Seems very solid after a couple of weeks use, hopefully it'll last, no reason for concern atm.
Sent from my LG-H850 using Tapatalk

If you have a CD slot in your car that you don't use... I would recommend this mount: https://goo.gl/vF8ZUh
I've been using it for the last two years, and I love it.

coyzer said:
I have the Spigen case with the HR mount and it works great. Downside is the USB needs plugged in every time vs my Brodit active charger for M8. Saying that the flexibility of the HR outweighs the hassle of plugging in the USB cable. The HR mount is an universal which is spring loaded to grip multiple phone shapes and sizes. Seems very solid after a couple of weeks use, hopefully it'll last, no reason for concern atm.
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Would you be able to show me a photo of your setup with the G5 wearing the case and in the mount?
EDIT: I just realised I would not be able to use the Hi-Fi Plus module with this mount. I would have to drill a hole in the bottom, which I wouldn't have an issue in doing...

Hey all. So is Brodit the only manufacturer making specifically LG G5 car mounts? I'm searching high and low and all others I find in my searches are technically "universal" car mounts. Boo! I may have to go without a case for my G5 and get a Brodit mount. Not sure how I feel about this!

There's a magnetic model from Anker. Has anyone tried?

https://www.walmart.com/ip/37551986...75035&wl11=online&wl12=37551986&wl13=&veh=sem
Right from Wal-Mart. By FAR, the best magnetic car mount I've ever used. Also comes with two magnets. Get it.

TylerDurdenK said:
I'm looking for a couple of mounts I can use in our cars. I would like universal ones that both me and my wife can use (she's just inherited my G3).
I like the idea of the magnet ones like this Look at this on eBay http://www.ebay.co.uk/itm/291750206879 but I don't know how good they are.
Thanks
Click to expand...
Click to collapse
i have been using the one below on My Fj from My G3 days. works just as well with the G5.
http://www.iottie.com/Product/Detail/1139/iOttie-Easy-One-Touch-2-Car-Mount-Holder-

invertedskull said:
Would you be able to show me a photo of your setup with the G5 wearing the case and in the mount?
EDIT: I just realised I would not be able to use the Hi-Fi Plus module with this mount. I would have to drill a hole in the bottom, which I wouldn't have an issue in doing...
Click to expand...
Click to collapse
I can't upload photos. If you still want photos maybe you can dm me.
Sent from my LG-H850 using Tapatalk