Database Info

[Q] Halted while booting with X Recovery - x10minipro

Hi All,
Need your help. I am trying to upgrade my 10minipro from 2.1 to gingerbread, but was stuck with xrecovery. I have followed the below steps:
1. Partitioning the SD card - success, with 1.1 GB.
2. Rooting the mobile phone - Success, using Superoneclick.
3. Installed xrecovery successfully.
4. Downloaded the custom Gingerbread ROM, and renamed to update.zip - Success
5. Re-booted the mobile, and selected 'Back' button right after white Sony Ericsson logo loaded. - Success
6. XRecovery screen loads - Success
Unable to proceed forward with this step:
7. Back up / Factory Reset / Install update.zip from SD card.
Please help & let me know if I have done any error during the process.
Thanks in advance,
Rakesh Vikram

[ROOT + CWM 6.0.1.5 or 5.5.0.4] Lenovo IdeaPad A2107A (-H)

The following post is just a TESTED collection of tools and procedures that were found over at XDA forum or elsewhere on the Internet.
I do not take any credit for all those nice scripts and manuals - I just put them together for the young community of IdeaPad A2107A owners.
Below you will find methods of getting root and Clockwork Mod Recovery v 6.0.1.5 on IdeaPad A2107A (I own the -H version with dual SIM and ca. 4 GB of internal memory).
All processes were tested by me and are working well but obviously you are responsible for your actions.
My device runs on ICS 4.0.3, compilation A2107A-H_S341 and has a couple of European languages (tablet bought in Poland).
What you need is installed ADB drivers so the PC can "talk" to you tablet. You will find a lot of guides on the net - just make sure Windows device manager shows Android Device - Android ADB Interface or something close to that.
I also advise to enable USB debugging and allow installing applications from unknown sources - all in your tablet's settings.
Once you make sure you have done the above you're good to go.
So let's go!
Download this: http://www.mediafire.com/download.php?5o7dm16d430lwal (un7zip) and read as follows:
1 - Root
The method I chose is for patient people - the device will reboot 3 times during this process.
a) connect your tablet to the PC, open "1 - 4.03root" folder and run "root.bat"
b) just after you run the .bat the device will reboot and in the command prompt you will see "Press any key to continue . . ." - WAIT until the tablet boots up completely. When you see the lockcreen THEN hit a key in the command prompt.
c) the above will happen 2 more times - always WAIT for the tablet to boot completely.
This process will install Superuser and RootExplorer so find those apps and see if the root works.
2 - Backup the whole ROM that is on your device - will be useful with making the CWM recovery.img file.
For this you will need ca. 2GB of memory so I advise at least 4GB sdcard.
I also advise to go to the settings and in the memory tab set the "Default write disk" to "SD storage" - this makes the microSD the primary "sdcard" - makes things easier with backups etc.
ALSO in the settings set the screen to stay on for at least 10 minutes - this is how long it will take to do the full ROM dump - important to keep the script alive.
To avoid any issues turn the flight mode on so no new "data" is received by the device.
Once you're done open "2 - Backup" folder from my 7zip and copy the "gscript" folder to the root of your sdcard. Now install "GScriptLite.apk" and run it (needs root access!).
In the app hit the menu button and pick "Add Script" ->"Need SU?" must be checked -> "Load file" -> select "back_mt6575_a4_v2c.sh" -> save and click the script.
As I said - wait ca 10 minutes for the scrip to finish. Now you will have a nice backup in the SD - look for "backup_v2" folder - copy it to your PC.
3 -Mobileuncle - it's in the Google Play Store but you won't find it with our tablet - supposedly incompatible. Bull*hit!
Open "3 - Mobileuncle" folder, copy the apk to your device and install. We will come back to this later.
4 - How about the CWM? Yes!
Open "4 - CWM 6015" - you will find a PDF there - read the instructions. The subfolder "michfood" contanis all the scripts you need so you don't have to download anything else.
ATTENTION - the "recovery.img" used in this process is YOUR "recovery.img" that you dumped in step 2. So find your backup from step 2 and the original "recovery.img" from your ROM.
ATTENTION - our device is MT6575 so you pick nr 1 in the command prompt.
5 - Once you have the new "recovery.img" with CWM (it is actually smaller than the original file) copy it to the root of your sdcard.
Now open the Mobileuncle Tools you installed in step 3 and hit "Recovery Update".
There, at the very top of the screen you will see your new CWM recovery file - hit it and then confirm the update. It takes a second!
Now you will be asked to boot into recovery mode - go ahead, try it
If the tablet booted in CWM then you are all set!
REMEMBER - to go into the recovery mode while the device is OFF you need to:
1 - hold the power button for ca 3 seconds
2 - let it go and in the same moment press BOTH Vol + and Vol - buttons.
REMEMBER 2 - the CWM 6.0.1.5 makes backups in a bit different way than the old CWM - read here :http://forum.xda-developers.com/showthread.php?t=1846446
It also appears that the key to modding our tablet is the MT6575 processor - a lot of tools just need to support this processor, the device itself is not so important.
All the best.
Mike.
P.S.
A little film how it looks: http://www.youtube.com/watch?v=tM3Sdwf2i4M
------------------------------------------------- UPDATE 1 ---------------------------------------------------------
For those who are running the same compilation as I am (A2107A-H_S341):
- you can download my recovery file from here: http://www.mediafire.com/download.php?um372gh6ayf6t6w
To use it you need to do:
1 - Root
(optional backup with GScriptLite.apk)
2 - flash the recovery file with Mobileuncle
Be careful and make sure you have a backup if you want to try this file with another compilation.
Cheers.
------------------------------------------------- UPDATE 2 ---------------------------------------------------------
Tested (by user: manwithmanypiercings) USB drivers are in this post: http://forum.xda-developers.com/showpost.php?p=34651039&postcount=51
------------------------------------------------- UPDATE 3 ---------------------------------------------------------
I think there is even easier way than the one I originally posted above.
BUT I cannot be sure that it will work with all of you - the reason is that I made so many changes to my A2107A-H that I do not know whether this method works "just because it's universal" or because my tablet was tweaked far enough.
On the other hand when you consider it reasonably it looks like it's quite simple and there is no particular reason why it shouldn't work with a stock A2107A.
So...
What you need:
1 - this package: http://www.mediafire.com/download.php?fbuzi5xjofs7vgf
2 - PC running Windows 7 would be the best (7 gave me no problems at all - takes 1 minute to do it). I made it on Windows 8 as well but there is a lot more fuss to install the proper driver.
What you do:
1 - turn on USB Debugging on your tablet
2 - connect the tablet to your PC (if it's the 1st, some default drivers will install - that's ok)
3 - tap on the notifications area in the "Connect as" change to "MTP" - this is quite important !
4 - from the downloaded package run the "Flash_tool.exe"
- click "Scatter-loading" on the right and find "MT6575_Android_scatter_emmc.txt"
- in the list in the lower part of the window you MUST have the "PRELOADER" (super important) and "RECOVERY" ticked and leading to the correct files. The PRELOADER = "preloader_lenovo75_a2_ics.bin" (in the package) and the RECOVERY is the recovery file of your choice -> there are 3 in the package - pick the one you want. You can flash them over and over so if you don't like one then try the other.
5 - click "Download" above - you will see a prompt saying that not all images were loaded - that is fine - we only want to flash the RECOVERY - so click "Yes"
6 - now the Flash tool is waiting for the tablet - press "reset" on the back - Windows will recognize a new device (and WILL NOT find the driver unless you have done it before) - no worries, you have the correct driver.
7 - open Windows "Device manager" and locate the MT65..... unrecognised device -> update / install driver -> point Windows to "USB VCOM Driver" folder from the package and pick your system. My Windows 7 found the driver on the spot but asked to confirm the install - "insecure" driver - I obviously clicked "install anyway" and so should you.
8 - once the driver is loaded the Flash tool will flash the new recovery file - you will see some colour progress bars in the program - at the end you should see a green circle.
That is it. Unplug the tablet, press reset on the back and you can now enter the recovery mode.
FUN FACT: the "reset" button on the back is not really a reset button, it's more like physical cut off button to temporarily disconnect the battery.

I have the Lenovo A2107A under Vodafone's brand Vodafone Smart Tab II 7
It has Android version 4.0.4 and compilation: A2107A_A404_010_002_120913_VODA
Imanaged to root it and install CWM using this thread. But somehow I was not able to create the CWM modded recovery.img
I used the one provided here and it worked fine.
Thanks for this.

I can't connect tablet to PC
csns said:
The following post is just a TESTED collection of tools and procedures that were found over at XDA forum or elsewhere on the Internet.
I do not take any credit for all those nice scripts and manuals - I just put them together for the young community of IdeaPad A2107A owners.
Below you will find methods of getting root and Clockwork Mod Recovery v 6.0.1.5 on IdeaPad A2107A (I own the -H version with dual SIM and ca. 4 GB of internal memory).
All processes were tested by me and are working well but obviously you are responsible for you actions.
My device runs on ICS 4.0.3, compilation A2107A-H_S341 and has a couple of European languages (tablet bought in Poland).
What you need is installed ADB drivers so the PC can "talk" to you tablet. You will find a lot of guides on the net - just make sure Window device manager shows Android Device - Android ADB Interface or something close to that.
I also advise to enable USB debugging and allow installing applications from unknown sources - all in your tablet's settings.
Once you make sure you have done the above you're good to go.
So let's go!
Download this: http://www.mediafire.com/download.php?5o7dm16d430lwal (un7zip) and read as follows:
1 - Root
The method I chose is for patient people - the device will reboot 3 times during this process.
a) connect your tablet to the PC, open "1 - 4.03root" folder and run "root.bat"
b) just after you run the .bat the device will reboot and in the command prompt you will see "Press any key to continue . . ." - WAIT until the tablet boots up completely. When you see the lockcreen THEN hit a key in the command prompt.
c) the above will happen 2 more times - always WAIT for the tablet to boot completely.
This process will install Superuser and RootExplorer so find those apps and see if the root works.
2 - Backup the whole ROM that is on your device - will be useful with making the CWM recovery.img file.
For this you will need ca. 2GB of memory so I advise at least 4GB sdcard.
I also advise to go to the settings and in the memory tab set the "Default write disk" to "SD storage" - this makes the microSD the primary "sdcard" - makes things easier with backups etc.
ALSO in the settings set the screen to stay on for at least 10 minutes - this is how long it will take to do the full ROM dump - important to keep the script alive.
Once you're done open "2 - Backup" folder from my 7zip and copy the "gscript" folder to the root of your sdcard. Now install "GScriptLite.apk" and run it (needs root access!).
In the app hit the menu button and pick "Add Script" ->"Need SU?" must be checked -> "Load file" -> select "back_mt6575_a4_v2c.sh" -> save and click the script.
As I said - wait ca 10 minutes for the scrip to finish. Now you will have a nice backup in the SD - look for "backup_v2" folder - copy it to your PC.
3 -Mobileuncle - it's in the Google Play Store but you won't find it with our tablet - supposedly incompatible. Bull*hit!
Open "3 - Mobileuncle" folder, copy the apk to your device and install. We will come back to this later.
4 - How about the CWM? Yes!
Open "4 - CWM 6015" - you will find a PDF there - read the instructions. The subfolder "michfood" contanis all the scripts you need so you don't have to download anything else.
ATTENTION - the "recovery.img" used in this process is YOUR "recovery.img" that you dumped in step 2. So find your backup from step 2 and the original "recovery.img" from your ROM.
ATTENTION - our device is MT6575 so you pick nr 1 in the command prompt.
5 - Once you have the new "recovery.img" with CWM (it is actually smaller than the original file) copy it to the root of your sdcard.
Now open the Mobileuncle Tools you installed in step 3 and hit "Recovery Update".
There, at the very top of the screen you will see your new CWM recovery file - hit it and then confirm the update. It takes a second!
Now you will be asked to boot into recovery mode - go ahead, try it
If the tablet booted in CWM then you are all set!
REMEMBER - to go into the recovery mode while the device is OFF you need to:
1 - hold the power button for ca 3 seconds
2 - let it go and in the same moment press BOTH Vol + and Vol - buttons.
REMEMBER 2 - the CWM 6.0.1.5 makes backups in a bit different way than the old CWM - read here :http://forum.xda-developers.com/showthread.php?t=1846446
It also appears that the key to modding our tablet is the MT6575 processor - a lot of tools just need to support this processor, the device itself is not so important.
All the best.
Mike.
P.S.
A little film how it looks: http://www.youtube.com/watch?v=tM3Sdwf2i4M
------------------------------------------------- UPDATE 1 ---------------------------------------------------------
For those who are running the same compilation as I am (A2107A-H_S341):
- you can download my recovery file from here: http://www.mediafire.com/download.php?um372gh6ayf6t6w
To use it you need to do:
1 - Root
(optional backup with GScriptLite.apk)
2 - flash the recovery file with Mobileuncle
Be careful and make sure you have a backup if you want to try this file with another compilation.
Cheers.
Click to expand...
Click to collapse
csns thanks for your guide
Unfortunately I can't connect my tablet to pc in USB debbuging mode. I tried a lot of drivers from net but without success.. Pls let me know the right way to root my tablet.

optical99 said:
csns thanks for your guide
Unfortunately I can't connect my tablet to pc in USB debbuging mode. I tried a lot of drivers from net but without success.. Pls let me know the right way to root my tablet.
Click to expand...
Click to collapse
Hi there,
Try those drivers: http://www.mediafire.com/?vx2hyv7dpwlmeyy
They come from the current Android SDK but I am running a 64 bit system and I'm not sure if those drivers will work with 32 bit systems.
Fingers crossed!

I tried with yor recommend dirvers and with a lot of others and doesn't work. I have to unrecognised denices in Device Manager - A2107A-H and MTP.
I am very upset about Lenovo because their support doesn't exist.

optical99 said:
I tried with yor recommend dirvers and with a lot of others and doesn't work. I have to unrecognised denices in Device Manager - A2107A-H and MTP.
I am very upset about Lenovo because their support doesn't exist.
Click to expand...
Click to collapse
I had to use the PDANET from this link.
http://forum.xda-developers.com/showthread.php?t=1982334&page=6
Should be the first post.
Sent from my Samsung Galaxy Note running JellyBeer using Xparent ICS Blue Tapatalk 2

First of all, a ton of thanx to csns for posting this detailed procedure along with all required scripts and tools...
I have just one question...Which Modified ROM did you install as I see you have unlocked calling feature in the video you posted???
I asked because the MOD ROM by pemergency in the other thread is for the 16 GB and creates some issues in the device...But your's is 4 GB, as is mine...
Thanx in advance

makbro said:
First of all, a ton of thanx to csns for posting this detailed procedure along with all required scripts and tools...
I have just one question...Which Modified ROM did you install as I see you have unlocked calling feature in the video you posted???
I asked because the MOD ROM by pemergency in the other thread is for the 16 GB and creates some issues in the device...But your's is 4 GB, as is mine...
Thanx in advance
Click to expand...
Click to collapse
I'm glad you find my post useful.
As for the calling feature - it's not actually working
You see, to have the calling app (in other words "the phone" app) in the app drawer all you need to do is change one tiny value in framework-res.apk.
This value is telling the system weather the whole device is supposed to handle voice calls or not. I just tricked the system to make the Phone.apk visible but there is a lot more do be done in order to make a real call over the cellular network.
I've just had this tablet for a week and I didn't have much time to dig into this topic. Let's see what the weekend brings
Be patient, I think it's just a matter of time when someone posts a user friendly guide... Or search yourself and share what you find with the community.
Take care.

works fine
manwithmanypiercings
I have gained acces to tabled with PDAnet drivers...thanks a lot
csns
I followed all steps and installed CWM 6015. Very nice tutorial...I thought it's simpliest way...respect for your job

optical99 said:
manwithmanypiercings
I have gained acces to tabled with PDAnet drivers...thanks a lot
csns
I followed all steps and installed CWM 6015. Very nice tutorial...I thought it's simpliest way...respect for your job
Click to expand...
Click to collapse
Glad I could help by showing the link. Glad you got everything else taken care of.

This is an awesome post! Thak you very much.

Need help at step 4
csns said:
The following post is just a TESTED collection of tools and procedures that were found over at XDA forum or elsewhere on the Internet.
I do not take any credit for all those nice scripts and manuals - I just put them together for the young community of IdeaPad A2107A owners.
Below you will find methods of getting root and Clockwork Mod Recovery v 6.0.1.5 on IdeaPad A2107A (I own the -H version with dual SIM and ca. 4 GB of internal memory).
All processes were tested by me and are working well but obviously you are responsible for your actions.
My device runs on ICS 4.0.3, compilation A2107A-H_S341 and has a couple of European languages (tablet bought in Poland).
What you need is installed ADB drivers so the PC can "talk" to you tablet. You will find a lot of guides on the net - just make sure Windows device manager shows Android Device - Android ADB Interface or something close to that.
I also advise to enable USB debugging and allow installing applications from unknown sources - all in your tablet's settings.
Once you make sure you have done the above you're good to go.
So let's go!
Download this: http://www.mediafire.com/download.php?5o7dm16d430lwal (un7zip) and read as follows:
1 - Root
The method I chose is for patient people - the device will reboot 3 times during this process.
a) connect your tablet to the PC, open "1 - 4.03root" folder and run "root.bat"
b) just after you run the .bat the device will reboot and in the command prompt you will see "Press any key to continue . . ." - WAIT until the tablet boots up completely. When you see the lockcreen THEN hit a key in the command prompt.
c) the above will happen 2 more times - always WAIT for the tablet to boot completely.
This process will install Superuser and RootExplorer so find those apps and see if the root works.
2 - Backup the whole ROM that is on your device - will be useful with making the CWM recovery.img file.
For this you will need ca. 2GB of memory so I advise at least 4GB sdcard.
I also advise to go to the settings and in the memory tab set the "Default write disk" to "SD storage" - this makes the microSD the primary "sdcard" - makes things easier with backups etc.
ALSO in the settings set the screen to stay on for at least 10 minutes - this is how long it will take to do the full ROM dump - important to keep the script alive.
To avoid any issues turn the flight mode on so no new "data" is received by the device.
Once you're done open "2 - Backup" folder from my 7zip and copy the "gscript" folder to the root of your sdcard. Now install "GScriptLite.apk" and run it (needs root access!).
In the app hit the menu button and pick "Add Script" ->"Need SU?" must be checked -> "Load file" -> select "back_mt6575_a4_v2c.sh" -> save and click the script.
As I said - wait ca 10 minutes for the scrip to finish. Now you will have a nice backup in the SD - look for "backup_v2" folder - copy it to your PC.
3 -Mobileuncle - it's in the Google Play Store but you won't find it with our tablet - supposedly incompatible. Bull*hit!
Open "3 - Mobileuncle" folder, copy the apk to your device and install. We will come back to this later.
4 - How about the CWM? Yes!
Open "4 - CWM 6015" - you will find a PDF there - read the instructions. The subfolder "michfood" contanis all the scripts you need so you don't have to download anything else.
ATTENTION - the "recovery.img" used in this process is YOUR "recovery.img" that you dumped in step 2. So find your backup from step 2 and the original "recovery.img" from your ROM.
ATTENTION - our device is MT6575 so you pick nr 1 in the command prompt.
5 - Once you have the new "recovery.img" with CWM (it is actually smaller than the original file) copy it to the root of your sdcard.
Now open the Mobileuncle Tools you installed in step 3 and hit "Recovery Update".
There, at the very top of the screen you will see your new CWM recovery file - hit it and then confirm the update. It takes a second!
Now you will be asked to boot into recovery mode - go ahead, try it
If the tablet booted in CWM then you are all set!
REMEMBER - to go into the recovery mode while the device is OFF you need to:
1 - hold the power button for ca 3 seconds
2 - let it go and in the same moment press BOTH Vol + and Vol - buttons.
REMEMBER 2 - the CWM 6.0.1.5 makes backups in a bit different way than the old CWM - read here :http://forum.xda-developers.com/showthread.php?t=1846446
It also appears that the key to modding our tablet is the MT6575 processor - a lot of tools just need to support this processor, the device itself is not so important.
All the best.
Mike.
P.S.
A little film how it looks: http://www.youtube.com/watch?v=tM3Sdwf2i4M
------------------------------------------------- UPDATE 1 ---------------------------------------------------------
For those who are running the same compilation as I am (A2107A-H_S341):
- you can download my recovery file from here: http://www.mediafire.com/download.php?um372gh6ayf6t6w
To use it you need to do:
1 - Root
(optional backup with GScriptLite.apk)
2 - flash the recovery file with Mobileuncle
Be careful and make sure you have a backup if you want to try this file with another compilation.
Cheers.
------------------------------------------------- UPDATE 2 ---------------------------------------------------------
Tested (by user: manwithmanypiercings) USB drivers are in this post: http://forum.xda-developers.com/showpost.php?p=34651039&postcount=51
Click to expand...
Click to collapse
Hi csns,
Sorry to bother you but when I try drag and drop my original "recovery.img" to "cwmr 6015.bat" in the "michfood" folder, I get a warning message "System cannot find the specified file "C:\users\....\recovery.img" "recovery" and the bat script exits...I have tried the following:-
1. Copy the folder and file "michfood" and my original "recovery.img" file in all possible alternate locations of my PC including desktop as shown in the pdf tutorial in "michfood" folder.
2. The permissions for both folders is "Full Control" for all users.
3. Files not hdden or protected.
4. Also turned off my antivirus and firewall.
No luck....Please help !!! Thanx in advance

makbro said:
Hi csns,
Sorry to bother you but when I try drag and drop my original "recovery.img" to "cwmr 6015.bat" in the "michfood" folder, I get a warning message "System cannot find the specified file "C:\users\....\recovery.img" "recovery" and the bat script exits...I have tried the following:-
1. Copy the folder and file "michfood" and my original "recovery.img" file in all possible alternate locations of my PC including desktop as shown in the pdf tutorial in "michfood" folder.
2. The permissions for both folders is "Full Control" for all users.
3. Files not hdden or protected.
4. Also turned off my antivirus and firewall.
No luck....Please help !!! Thanx in advance
Click to expand...
Click to collapse
Well, this happened to me once and I think the reason was that the path was too long - I guess it may have something to do with the fact that the .bat is a simple "program" and can have some problems with handling long paths.. specially with "national" character in them.
Try finding a location as close to the root of the drive as possible, and make sure you have full R/W access. Or try with a pendrive for example.
Since you made a backup of your ROM I think you are quite safe with using the recovery I uploaded - first post -> UPDATE 1.
They seem to fit all 2107A devices. If not I will tell you how to restore the original recovery from your backup.
You can also read UPDATE 3 I just made - your choice.

Thanx
Hello csns,
Thanx to your help, I have also got CWM recovery working on my device.
BTW I saw these two posts on a forum in Russian (I guess)...I used google translate and am pretty sure these two posts that I provide links for below have two modified ROMs with everything working, including phone and radio !!! The only draw back is that once you flash these ROMs you'll get Russian language, which can be changed to English from the language menu
I plan to fo it myself as well tomorrow,would let you know the outcome
http://4pda.ru/forum/index.php?showtopic=286687&st=920 (go down to the post labelled "A2107_Foxtrot_v100")
and
http://4pda.ru/forum/index.php?showtopic=286687&st=440 (go down to the post labelled "Прошивка Tasemart
MOD 1.1")
and of course you can also try the "Angeleas_Final" modified ROM also that I'll upload and provide links to tomorrow
Thanx again for all your help !!!

I also had many trouble getting the cwm bat file to work. It is very picky about its path and arguments on Win7.
I moved the michfood folder to C: and moved my own recovery.img to C:\michfood\recovery.old
cd C:\michfood
cwmr\ 6015.bat recovery.old
That worked - otherwise it wouldnt finish the cpio stuff.
Reworking that horrible script to work on linux would have probably taken less time -_-
Anyway - thanks!

Permissions problems on Windows7
Hi,
I Had the same problem.
makbro said:
Hi csns,
Sorry to bother you but when I try drag and drop my original "recovery.img" to "cwmr 6015.bat" in the "michfood" folder, I get a warning message "System cannot find the specified file "C:\users\....\recovery.img" "recovery" and the bat script exits...I have tried the following:-
1. Copy the folder and file "michfood" and my original "recovery.img" file in all possible alternate locations of my PC including desktop as shown in the pdf tutorial in "michfood" folder.
2. The permissions for both folders is "Full Control" for all users.
Click to expand...
Click to collapse
My solution:
It was required to use a directory not to deep in folder structures, so the best is as short as possible like "C:\michfood".
I had to add "Full Control" permissions for "everyone" to the "michfood"-directory and enable the "replicate permissions to subfolders"-option (I don't know the exact designation because I use it in german ... )
I had to delete an existing "Recovery" folder inside the "michfood"-directory from earlier attempts to create the new file and for this I had to take over the ownership of the "Recovery" folder before I was able to delete it.
The original Recovery.img must be in a different folder than "michfood". This can be on the desktop but for a shorter path it could be in the root directory.
I had success after copying "cwmr 6015.bat" to "go.bat" (it's shorter and does not contain any space in it) and calling it from command line from its directory( C:\>cd C:\michfood ) with: "go C:\Recovery.img" ( I had Recovery.img on C:\ ).
makbro said:
3. Files not hdden or protected.
4. Also turned off my antivirus and firewall.
No luck....Please help !!! Thanx in advance
Click to expand...
Click to collapse
I hope this helps ...

Thanx
Thanx for the suggestions everyone, appreciate it...I got it working in the mean time on a WinXP desktop without any problem

makbro said:
Thanx for the suggestions everyone, appreciate it...I got it working in the mean time on a WinXP desktop without any problem
Click to expand...
Click to collapse
HOW?
Tell me what you did...

Cristian.Ene said:
HOW?
Tell me what you did...
Click to expand...
Click to collapse
I copied the folder as "C:\michfoods" and recovery image file as "C:\recovery.img" and gave the command "cwmr6015 C:\recovery.img"...Before that, I removed the space from the file name "cwmr 6015.bat" and saved it as "cwmr6015.bat".

Hi, i rooted succesfuly my a2107a device and installed backup Gscript ...loading "back_mt6575_a4_v2c.sh and saving it , but when it comes to run...nothing...only the counter saying how many sec's till stop.Any ideeas why?

How to Properly Unbrick Micromax Funbook Pro (P500)

Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !

Just adding somting as a requirement.
If you need to by pass the mouse with OTG stuff use mymobiler . com google it
gr8 helps thanks:fingers-crossed:
PS as External SD card is required to make it work

cwm problem
Pls help, I have rooted my P500. But unable to install CWM recovery. I tried both methods Novotools and cem5ics command prompt method.
Novotools installs cwm in my tab but when i reboot it it hangs at mmx logo.

Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help

thatsgamer said:
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
Click to expand...
Click to collapse
I am going to replace my tab today. I know the fix ! Just wait !
Thanks for your patience.

devanshkumar said:
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Click to expand...
Click to collapse
Thanks to this post i was able to unbrick, however there are a few steps that i would like to add to make it more clear.
at Step 4: After pressing the power button ten times, you will see that a pop up comes tellinga new hardware found and will ask to locate the drivers, now click continue to automatically update the driver. it will fail and then an option to browse and locate the driver will pop up. Now browse to the folder where you extracted live suit pack and choose the USB driver folder to install the driver. Next it will come up with two pop ups press Yes both the times
Step 6 Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer
Step 7 is the same
Whilst putting the backup file on the tab create a clockworkmod folder in the root of the tab create another folder called backup and extract the backup file downloaded onto it.

It worked
All the steps work perfectly..I was able to unbrick the device with touch using first Livewire image .. Thanks a ton developer..

Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit

deadnight.warrior said:
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
Click to expand...
Click to collapse
It looks like there is an issue with CMW installation. Follow rooting and other steps all over. Restoring backup of 26 should be good enough
Sent from my HTC One X+ using xda app-developers app

bricked funbook
guys,
i installed custom rom from cwm names cyanbook based on jelly bean but when phone started it stucked on mi logo....i tried many times but nothing happened...so i downloaded livesuite from some site and stock rom as on that site...and flashed the same.....but now i can see only blank screen.... pls guys help me...........is there any way to install stock rom...

[Q] ZTE V5 Red Bull V9180 WCDMA 2GB RAM, 8GB ROM- root, cwm

So by today (22.09.2014) is your phone oficialy renamed from "ZTE Red Bull V5" to "ZTE V5"
POSTING A PROBLEM
If you have some sort of problem with your device please please get us this info, so we could help you:
1-what rom/firmware are you using
2-what recovery
3-if you have rooted your device
4-what caused the problem
5-step by step description what you did before the problem shows up.​
Hi i just made this thread to make a base for everyone who bought this (form me) superb phone.
So far we got root, custom recovery, and many chinese roms (based on Nubia UI, Color OS, LEWA OS, FROG OS...).
There are Mokee AOSP 4.4.4. rom in develpoment and CM11 in development, CM12 also.
2015.02.13 - Latest firmware is 1.17 (andorid 4.4.2, nubia UI2.5.1)!!!
Changelog(google translation from chineese):
-optimize the signal problem
-solving open U disk mode or restart the phone, ringtones revert to the default issue
into the video again, this video from one schedule to start playing the video
-update time management software, to solve the problem of the shutdown alarm clock does not ring
-media library interface, Pictures Pictures folder appear as a blank
-to use the gallery under OTG open unsupported file error
-switching to the media library interface, multiple exposure, suggesting that language View screenshot untranslated
-save the video recording status suspended again after recording, the Pause button to display the error
-optimization manually Focus
-video recording in the recording pause again, long display of detailed information is incorrect
-horizontal screen - portrait - horizontal screen operation, not full screen
-video player interface to open the USB mass storage press the return key error
here is link to my google drive. It contains stock roms from 0.50 to 1.12, GAPPS ect. Also contains tools to root and flash custom recovery.
MY GOOGLE DRIVE ZTE V9180 FOLDER
In my Google Drive there is also two custom recovery CWM and TWRP (thanx a lot to FAZERGOO from 4PDA.ru, here on XDA it is fazerg, so please thank him for his work)..the script in my root+recovery folder is updated, so you have option to flash CWM (6.0.5.1) or TWRP (2.8.0.0.)
here is list of commands you can dial in dialer and get some hidden menu and settings:
*#06# - displays IMEI
##36 - update server settings for OTA
*#*#4636#*#* - display phone information, battery information, battery history, usage statistics, WiFi information
*#406# - touch screen calibration
--proximity sensor calibration--
*#777# - no cover of proximity sensor
*#776# - cover proximity sensor with hand 2-5 cm above..so the bar is in the green
*# 405# - MHL test
to go to recovery you have to poweroff the phone and hold "vol+" and "power" for 2 sec
to go to safe mode....???
best resources for ROMS (chinese sites):
bbs.anzhi.com
www.tdbeta.cn
www.ztehn.com
And of course our friends from Russia thread:
www.4pda.ru
proDOOMmans mega drive where you can find all Mokee, CM11, PAC roms:
HERE! and dont forget to hit THANKS button for everyone who develop and help us to use this device!!!!
TIPS & TRICKS
-HOW TO CHANGE LCD DENSITY and switch to phablet UI!!! Beware, the camera app is little bit smaller then the screen, becaouse of the density, but still works well.
-HOW TO ADD ONE HAND FEATURE
-did you know that when holding home button on locked screen lights a flashlight?
-when you double tap home button on locked screen the time changes to media player controls?
-when you tap several times on any home screen your glas will broke?
-when you zoom out with two fingers on any home screen you will get into screen manager?
-in alarm clock app there is setting "power of alarm", when turned on, you can turn off your phone at night and the phone turns on by itself in the alarmclock time and wakes you up?

complete guide by navin_n
People always asking again and again on flashing ROMs, Recovery, GApps, Root etc. So, I have made detailed step by step guide for this. Hope now it will be clear to everyone for these processes:
BEFORE YOU DO ANYTHING FROM FOLLOWING, PLEASE MAKE ANANDROID BACKUP, BEST WITH TWRP!!!​BECAUSE TWRP CAN MAKE BACKUP INCLUDING PRESIST AND MODEMST PARTITIONS!!![/CENTER]
GUIDE TO FLASH STOCK ROM:
NOTE:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding
2. Ensure that Phone Battery is at least 40%.
3. Downloaded required STOCK ROM.
4. Phone with Stock Recovery.
STEPS:
1. Copy the downloaded zipped STOCK ROM to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. In the Stock Recovery, perform wipe data/factory reset and wipe cache partition (In the menu, use +/- volume keys to scroll up/down & power button for confirmation).
5. Depending on which SD card you have copied the zipped STOCK ROM, choose "Apply update from /sdcard" or "Apply update from external /sdcard" accordingly.
6. Select the zipped STOCK ROM to flash.
7. Wait until you get the confirmation of successful flashing.
8. Reboot the phone by selecting "reboot system now".
9. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL CUSTOM RECOVERY + CUSTOM ROM:
AS FOR CERTAIN REPORTS IT IS STRONGLY RECOMMENDED TO FLASH CWM RECOVERY IF YOU HAVE 1/8 VERSION
REQUIREMENTS:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding.
2. Working Windows PC with ADB Drivers installed - without proper installation of drivers the process will not be successful.
3. Ensure that Phone Battery is at least 40%.
STEPS: (If you need only Custom Recovery, then follow the steps from 2 to 7, other steps you can skip)
1. Download the required zipped Custom ROM and copy it to the root directory of External SD card or Internal SD card.
2. Download the Recovery Tool zip file. (Link to download the Tool) . Make sure to download whole files. After that copy the zipped file to the root directory of C:\ or any place you prefer and then unzip the downloaded file.
3. Enable USB debuging mode. ("Menu Button" >> System settings(Settings) >> About phone(On the phone) >> Tap 6 times on Build number>>"Back button">> More >> Developer options >> Enable USB Debugging)
4. Connect the phone to the PC.
5. Go to the folder where you have unzipped the Recovery Tool file, and then execute the batch file "run.bat".
6. In PC, new window will open. Input your choice of Custom Recovery accordingly.
7. Follow the steps on-screen until all completes.
8. After completion, in the Fastboot menu, select "Boot recovery".
9. If the Custom Recovery was flashed succesfully, you will get CWM or TWRP recovery menu.
10. Perform wipe data/factory reset and wipe cache partition.
11. To flash the firmware: Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the ROM, external or internal >> Select Custom ROM >> Click Yes to flash selected ROM.
12. Wait until you get the confirmation of successful flashing.
13. Reboot the phone by selecting "reboot system now".
14. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL GAPPs & ROOT:
REQUIREMENTS:
1. Backup all important data (contacts, messages, call records, etc.) before proceeding, if necessary.
2. Requires CUSTOM RECOVERY.(Mandatory)
STEPS:
1. Download appropriate flashable zipped GAPPS & ROOT files and copy it to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the CWM or TWRP Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. Flash the zipped files (one at a time): Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the file, external or internal >> Select Zipped File >> Click Yes to flash selected file.
(No need to do wipe data/factory reset and wipe cache partition)
5. After successful flashing, reboot the phone by selecting "reboot system now". If it ask to fix the permission when you reboot, select Yes.
7. Wait until you get the confirmation of successful flashing.
8. DONE. (Your phone will have GApps and Root Permission)
and don´t forget to hit thanx button to @navin_n, @fazerg and me maybe @DallasCZ

APPS taht can be remover (thanx navin_n)
If you have already Rooted your device then you can easily uninstall the system apps using "Root Uninstallers" available in Google Play.
However, for me , i prefer to use Root Explorer and delete the apps from system folder. The following apps are safe to delete but still i advise you to backup the files before deleting. If you use Root Explorer, make sure to change attribute of the system folder from Read Only (R/O) to Read Write (R/W) when deleting.
Be ware you make it on your own!! If there is also odex file, delete them too!!!
APPs that can be deleted:
folder --> /system/app
nubia_account.apk - only if you log in in nubia account (maybe you need this to use themes)
nubia_Calculator_v1.2.1.apk - calculator app (i dont like it so i installe another one and delete this)
nubia_Calendar_v1.0.apk - nubia calendar app
nubia_ClockWidget.apk - clock widget
nubia_Music.apk - nubia music player
nubia_myfile.apk - nubia file manager
nubia_NBSecurity.apk - nubia antivirus and system cleaner
nubia_NotePad_v1.1.5.apk - nubia notepad
nubia_zbiglauncher_v2.0.apk - nubia launcher for old people (everything is biiig)
NubiaPlatLogo_V1.0.0.apk - nubia lanim showing when you tap on NUBIA version in "about phone"
ZAppDataBackup.apk - nubia main app for backup your phone
ZDataBackup.apk - nubia backup app
ZQuickSearchBox.apk - nubia quick search box (if you install GAPPS it contains original google search box)
ZVideo.apk - very basic media player
If you dont use Live Wallpapers you cen delete the main app:
LiveWallpapersPicker.apk
and of course all livepaper apks
BasicDreams.apk
HoloSpiralWallpaper.apk
LiveWallpapers.apk
MagicSmokeWallpapers.apk
NoiseField.apk
PhaseBeam.apk
folder --> /system/preset_apps
TP_360AppStore_1.9.203.apk
TP_360Video_1.2.0_Nubia.apk
TP_BaiduInput_1000541a.apk
TP_baidumap_6.2.0.apk
TP_baiduvideo_5.3.0.apk
TP_gowhere_1044_131118_150501.apk
TP_iReader_2013122410.apk
TP_JdAndroid_2.6.0.apk
TP_QQ_4.2.apk
TP_QRCodeScaner_v1.0.apk
TP_tieba_5.5.2.apk
TP_Weibo_4.0.0_602.apk
TP_weixin_502.apk

Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2

DallasCZ said:
ROOT
the only way to root it so far is to run an Chinese exe, which will root your phone and install superuser (chinese one). Then you need to uninstall the superuser and install one from google play.
CWM
so far there is only chinese CWM 6.0.4.6..looking for someone who can make it english.
Click to expand...
Click to collapse
Hi, can you please provide me the exe file to root and explain me the process to root? I would be really grateful for your help! Thanks
I have WCDMA/GSM V5 3G 9180

ROOT CWM
Hello,
i made a simple bat file, which will root your phone, install custom recovery or original recovery.
here is the link: Dallas Google Drive.
you made everything on your own ..i am not responsible for any phone software/hardware damage.

jday17 said:
Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2
Click to expand...
Click to collapse
Hi,
there ar ea lot of Chinese phones, this phone is ment to be sell china only.
There are many forums but in Chinese.
I wrote a little review on gizchina.cz (is in Czech language,so use google translator)

TIP
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery this package, then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.

DallasCZ said:
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery , then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.
Click to expand...
Click to collapse
Thanks for the info! I'm currently updating to 0.5 and will let you know if I manage to root it too.
I`ve read the review and mine phone too has the squeaky back cover. It started squeaky after just few back panel removals. This is not a concern for me, but I wanted to ask you something else: How is you call quality? When I do calls the other side can hear me perfectly but the sound through my ear speaker is muffled and not very clear. Increasing the volume make it even worse. Do you experience such an issue?

-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?

DallasCZ said:
-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?
Click to expand...
Click to collapse
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty

HuKuTo said:
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty
Click to expand...
Click to collapse
Hi, can you please tell the name of chinese official site for our phone? thanks!

SITES IN cHINESE LANGUAGE
Hello,
so there are many sites. To see attachments you have to register to the sites, which is a little bit tricky due to instatnt need of translation in the registration process, but it can be done.
official with a lot of new information also from ZTE service:ztehn.com
the best for custom ROM and Recovery (development):anzhi.com
to see anzhi.com you need to add two adress in your windows hosts file see here
also some good information can be found here on myzte.cn

another tip
-If you get the "android is upgrading" on every boot, then you have to uninstall titanium backup, reboot, wait 3 minutes and let the system settle down, then install titanium again, reboot, and its done.
-if you want to restore WIFI access point and passwords form Titanium Backup, use backup from tar file, not from XML!!!

Waiting on a custom rom
Hello everyone,
I used the method I found at needrom.
It did the trick; the device was rooted, gapps installed, an multilangual.
But I didn't manage to install the latest update (50). I thought it was because the device was rooted, so I removed root, whitout succes, I am still not able to install the update.
Also I think the contact manager is buggy; newly added contacts dissapear after rebooting the device, it doesn't matter if I sync the device. I have to import my contacts from my SD card every time this happens.
So, I hope there comes a good custom rom for this device with this excellent hardware! I have Miui unofficiall on my Xiaomi Mi2s, it works like a charm. I hope soon this device appears on the list one of these days

update
-if you installed the ROm from needrom, i think you cannot upgrade to 0.50.
-on www.ztehn.com you can download the full 0.50 rom (only english and chinese language) this rom you can flash.
-contacts: If you are in contacts, press "more" and "advanced" and check the "default storage" it must be set to your google account. Then go back and check "display settings" and check which accounts are to show in contact list.
I had same problem and the problem was, that all new contact automaticly save to local storage and i have the local storage unchecked to display..so i havent seen my newly added contacts!!!

I have same issue
I have same isse. I dont hear anyone. But everyone hear me. i think that built in speaker doesnt work.

ZTE v5 DualSIM v1.06 beta released (4.4.2 + Nubia UI 2.0, package contains new recovery, H106 update package and G050 restore package)
http://pan.baidu.com/share/link?shareid=2878143782&uk=2436317143 Pass: [COLOR=#0640]j7cb
MD5:[/COLOR][COLOR=#0640]3C318AE402AC5424444F5862B540AF2D
[COLOR=#0640]Uploaded to my MEGA acc: link (1.06 unzipped too)
[COLOR=#0640]BETA release [COLOR=#0640]but seems stable (according to chinese forum feedbacks) I will try thi[COLOR=#0640]s next week, when i receive my v9180 2/8G. [/COLOR][/COLOR][/COLOR]
[/COLOR][/COLOR]

I sucessfully installed 1.06 and its looking good so far. The problem Im facing is the "No connection to google servers" error when I try to add my google account. There is no playstore and I tried to manually install it trhough .apk but again no luck. Have you guys managed to run the playstore with this new firmware?

install my gapps package trough cwm recovery.

ZP999 & 3X : re-GUIDE flash custom recovery, obtain ROOT, keep original ROM

HI all,
I saw the need of reposting my post #282 (main ZOPO ZP999 thread) for people who want to root, flash recovery or for some reason lost control of their precious Zopo and want to regain it
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have noticed that the link sometimes is unavailable : Mod edit sales link removed
Therefore i post it here again : also THANKS TO JASPER===JG77 and Ghost45
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is what you have to do:
- Preferably use a Windows 7 (x32 or x64) system
- Download and install drivers http://www.4shared.com/rar/f0a9TeP8ba/Zopo_ZP999-3X_32-64bit.html
- Download the firmware and extract it (a stock ROM) http://www.zopomobileshop.com/content/9-download-zopo-mobile-latest-rom
- Download a recovery (I used CarlivTouch) http://www.4shared.com/file/xKa5nYyuce/recovery_CarlivTouch_30_ZP999.html
- Download SP Flashtool and extract http://www.4shared.com/zip/FlMUfELsba/SP_Flash_Tool_exe_Windows_v514.html
- Download SuperSu https://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
- Boot your phone and connect to your PC and copy the SuperSu zip to your SD (I used a micro SDcard and not phone storage)
- Disconnect and shutdown the phone
- Start SP Flashtool (as administrator)
- Click 'Scatter-Loading' and select the 'MT6595_Android_Scatter.txt' from the downloaded Firmware! Picture 1
- Remove all selections except (!) recovery
- Click on the location of the recovery
- Select the custom downloaded recovery file (in my case recovery_CarlivTouch_30_ZP999.img) Picture 2
- Remove the battery from your phone (DON'T CONNECT YET) (battery pull :not necessary i think...but does not harm )
- Make sure you see 'Download Only' in SP Flashtool and click the 'Download' button
- Now connect your phone to your computer and leave the battery out of it!
- Wait till you see a green sign Picture 3
- Disconnect your phone but the battery back in but (!) DON'T BOOT
- Connect the phone to a charger and wait till it shows the battery level
- Press the buttons Volume-Up and Power and hold them
- After the first Zopo screen release Power (I kept holding Volume-Up)
- If all is well you now see the custom recovery! (you can let go of the volume button ) (if it didn't work the first time because of wrong timing, just shut down again and retry)
- Immediately install the SuperSU ZIP file (install zip-> Choose zip from /storgage/sdcard1)
- When done choose reboot and if you get questions about fixing to keep the custom recovery and fix root, say YES
- Let it boot into Android and Check ROOT with f.e. rootchecker
- Go to Google Play Store and install Busybox (not necessary)
- Start Busybox and make sure you give it Root right (not necessary)
- Press Install, if it fails the first time do it a second time. You should see an OK message if all is well. (not necessary)
- Reboot your phone, and PRESTO, your phone is rooted.
If you would install MobileUncle Tools from Google Play Store you can see you are rooted. (Here you allways can go in recovery without any problems)
Thanksbutton appreciated

@raystef66,
New Zopo Official have taken new Forum of Zopomobileshop original first Zopo Forum.
So New threads are always here in Xda ...look for them.