[Q] Phone getting Edge speeds after flashing ROM - what is the issue - HTC Sensation

Hi,
I decided to flash Virtuous ICS ROM + accompanying firmware 1.24 flashed from hboot + 1.7 new kernel (previously used Revolution Gingerbread ROM stripped of all Sense).
Everything is smooth but I noticed phone data coverage shows Edge everywhere it used to show HSPA+ on all the highways.
I assume radio is not including TMobile bands, should I find a different firmware? I assume the issue is a firmware and not kernel or ROM, but I used link for firmware that is mentioned in the main Virsuous ROM thread that is supposed to be compatible with the ROM. Perhaps it is not compatible with TMobile though?
Thanks,
Vadim.

Check if Auto GSM/WCMDA is enabled in the mobile settings.

Which ROM? Did you flash h boot 1.27 after flashing ROM or before?, It has a new radio and ril., if you flashed your ROM after the firmware update the RIL May not match.
Sent from my HTC Sensation 4G with Beats Audio using xda premium

Like ARHD it's probably based on the EU ROMs so there isn't a 4G icon.
Flash a 4G icon mod.

xdviper said:
Check if Auto GSM/WCMDA is enabled in the mobile settings.
Click to expand...
Click to collapse
Ahh, slaps himself in the face
Indeed, GSM was in Mobile settings. Tried ten times to change to GSM/WCDMA and the setting always returned back to GSM and phone still showed Edge.
Today on eleventh attempt for some reason setting finally got saved and phone shows H (for HSPA+). Thanks!

Related

best rom + radio combination for you?

I have been using 2.3.5 with the new radio, I have more bars and sometimes I get better speeds but I lose more frequently my 3g and keeps bouncing 3g/1x, my wifi sucks but I don't use it a lot and 4g, I don't have here in my area.
Have the same problem since I moved to 2.3.5 and so have moved back to a rom that uses 2.3.4 (Oxygen 2.1.6).
Is the wifi/3g trouble due to the radio? If yes, anyone knows how I can use a newer rom with an older radio?
Thanks
Paparasee said:
Have the same problem since I moved to 2.3.5 and so have moved back to a rom that uses 2.3.4 (Oxygen 2.1.6).
Is the wifi/3g trouble due to the radio? If yes, anyone knows how I can use a newer rom with an older radio?
Thanks
Click to expand...
Click to collapse
Flash the rom first then apply the radio.
I have been using the old radio for a day and now I don't have a problem with the wifi and the 3g works the same, like crap, so I am going to keep the old radio with this one 2.3.5 rom http://forum.xda-developers.com/showthread.php?t=1205936 , for couples days and see. 3g in Sprint sucks!

Leedroid

As some of you have come from the captivate know what I did there with Rom Q&A threads. I am doing the same here. In an effort to clean up the site. All Rom related question shall from now on be posted in the proper Q&A or will be deleted on sight.
I recently flashed Virtuous Unity Rom.
And now i want to flash LeeDrOiD v3.2.1 Kernel on top of it.
Can i do it without factory reset / wiping?
I will lose data?
What could possibly go wrong?
What are the steps?
Thanks
You may be able to escape without crudding up your phone if you flashed Leedroid on top of that, but honestly it's a bad idea. Back everything up with Titanium and the SMS backup tool of your choice (and maybe a phone log backup tool, if that matters to you) and do a factory reset and wipe Dalvik cache. Virtuous Unity and LeeDroid are very different from one another, and are based on two different builds of the Sense framework.
Pls Help
After flashing with LeeDrOiD 4G V3.3.3 GB rom and radio now I cant use gps its not accure satellite. I used the radio from this thread http://forum.xda-developers.com/show....php?t=1106324
Radio: 12.54.60.25x_26.09.04.11_M2
MD5 Sum: da5fb425443abc49655f4569b274f03e
Is it the same radio recommend by Lee? (MD5 is different). I tried with gps fix but no luck. I tried more than 10 min outside the house. Pls help me to resolve this. I can only see one satellite signal for whole time.
I also flashed it with AngelDeath gps fix but no gps fix.
Thanks.
whoops never mind wrong thread
warunamail said:
After flashing with LeeDrOiD 4G V3.3.3 GB rom and radio now I cant use gps its not accure satellite. I used the radio from this thread http://forum.xda-developers.com/show....php?t=1106324
Radio: 12.54.60.25x_26.09.04.11_M2
MD5 Sum: da5fb425443abc49655f4569b274f03e
Is it the same radio recommend by Lee? (MD5 is different). I tried with gps fix but no luck. I tried more than 10 min outside the house. Pls help me to resolve this. I can only see one satellite signal for whole time.
I also flashed it with AngelDeath gps fix but no gps fix.
Thanks.
Click to expand...
Click to collapse
He recommended a radio that works for him in his area. Yours may differ. Try to flash the new update gingerbread att radio.
Sent from my HTC Inspire 4G using XDA Premium App
XAviierG said:
He recommended a radio that works for him in his area. Yours may differ. Try to flash the new update gingerbread att radio.
Sent from my HTC Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
Thanks for the reply. I flashed it with froyo Radio: 12.39a.60.19x_26.06.06.30_M
After doing everything I remove the phone cover. Then it works. I don't know whether the problem with radio or cover seems to me problem is the phone cover. Now still I'm using this radio and matching ril.
warunamail said:
Thanks for the reply. I flashed it with froyo Radio: 12.39a.60.19x_26.06.06.30_M
After doing everything I remove the phone cover. Then it works. I don't know whether the problem with radio or cover seems to me problem is the phone cover. Now still I'm using this radio and matching ril.
Click to expand...
Click to collapse
If your case was blocking the round oval where your flash light is then it was the case
Sent from my HTC Inspire 4G using XDA Premium App
SetCPU doesn't keep Smoothass governor when i reboot/power off.
Why?
I flashed the latest LeeDrOiD ROM and tinny audio has returned for me (or so I think)
My phone is still showing that I have an Inspire 4G however, so turbonium's audio fix should still be there right?
Anyone else having this issue?
LeeDrOiD 3.3.3
BFS Kernel
MmmmBeeeeer said:
I flashed the latest LeeDrOiD ROM and tinny audio has returned for me (or so I think)
My phone is still showing that I have an Inspire 4G however, so turbonium's audio fix should still be there right?
Anyone else having this issue?
LeeDrOiD 3.3.3
BFS Kernel
Click to expand...
Click to collapse
You could always just reflash the audio fix quickly, for grins.
Sent from my Inspire 4G using Tapatalk
That is what I did and sure enough it fixed it. Always go for the obvious I guess haha.
Is there a way to change the status bar colors to red? Like the wifi bars and battery indicator?
Power Cycling issue
I've been on Leedroid for the last couple builds but only recently has my phone been restarting when I press shutdown from the menu. Not sure if this is ROM problem or a phone problem. I did not make any significant changes before this started happening. Even when I pull the battery and leave it out for a minute or two, as soon as I put it back in it starts up w/out any input.
So any any insight would be appreciated.
Mine does the same thing. Restarts everytime I put turn off.
warunamail said:
After flashing with LeeDrOiD 4G V3.3.3 GB rom and radio now I cant use gps its not accure satellite. I used the radio from this thread http://forum.xda-developers.com/show....php?t=1106324
Radio: 12.54.60.25x_26.09.04.11_M2
MD5 Sum: da5fb425443abc49655f4569b274f03e
Is it the same radio recommend by Lee? (MD5 is different). I tried with gps fix but no luck. I tried more than 10 min outside the house. Pls help me to resolve this. I can only see one satellite signal for whole time.
I also flashed it with AngelDeath gps fix but no gps fix.
Thanks.
Click to expand...
Click to collapse
I just recently tried Lee and recommended radio but my DL speeds were horrid I went back to stock and boom instantly fixed you may want to try that if your still not happy
MMS trouble
I have been a lurker on here for a while and have flashed a few roms...now I am running 3.3.3 with the a radio and ril that work in my area but can't get mms at all, out going or incoming. The text will come through with a download button and when I hit it i get a failure. When I try to send I get a message cannot be sent message.
I have tried multiple radios, rils and both of Lee's kernels (stock and Brain F* scheduler)
I am just looking for a little help. I have a picture that I would really like to have that was sent via text from my mom of my son getting on the bus on his first day of kindergarten.
**edit** when I try to download a mms using radio 26.11.04.21_m and ril 2.2.0160hm I get a message of "Generic Network Failure"...and this has continued with every radio ril combo that I have tried over the last 5 days.
cagle333 said:
I have been a lurker on here for a while and have flashed a few roms...now I am running 3.3.3 with the a radio and ril that work in my area but can't get mms at all, out going or incoming. The text will come through with a download button and when I hit it i get a failure. When I try to send I get a message cannot be sent message.
I have tried multiple radios, rils and both of Lee's kernels (stock and Brain F* scheduler)
I am just looking for a little help. I have a picture that I would really like to have that was sent via text from my mom of my son getting on the bus on his first day of kindergarten.
**edit** when I try to download a mms using radio 26.11.04.21_m and ril 2.2.0160hm I get a message of "Generic Network Failure"...and this has continued with every radio ril combo that I have tried over the last 5 days.
Click to expand...
Click to collapse
You could try splitting out the single APN that comes with LeeDroid into 2 APNs; one for MMS and one for data. That is how it's done on the stock ROM. Here's the link to the procedure.
I've done that too. I'm really at a loss with this.
Sent from my Inspire 4G using XDA App
Install order
Hi to all. i have been using CM7 and Ninja for awhile now and i'm finally ready to go back to sense. i have decided to start with leedroid. i know how to flash a ROM but their are so many options to install on this ROM that i'm not sure in what order or what process to use. i what to install A2SD+ also leedroid, flyIn_Aminations, GB patch DHD to Inspire4g, and leedroids kernel. i have downloaded all the zip files but i'm not sure in what order or how to go about it. the A2SD is the one i'm the most unsure about as i've never done it. please help with this. a order list and process would be appreciated.

TMOUS ROMs

Is there a list of ROMs that are full TMOUS support out of the box?
Yes, they all are. Have you been experiencing problems?
As far as I know, as long as you have super CID you can choose whatever ROM you want. The only problem you might have is a loss of data speeds, since most recommend a particular radio (although I'm on CoreDroid 2.0 with stock TMOUS radio and I've experienced no drop in speeds, even though they recommend getting the latest radio). If you want to ensure no loss in data speeds or are afraid of flashing radios (like me), stick with the ROMs that say TMOUS in the thread title. All the guys who make TMOUS specific ROMs include it either in the thread title or in the first post.
Edit: I shouldn't say the ONLY thing that can happen is a loss of data speeds, because sometimes you lose the ability to do wifi calling or the 4G icon is switched to an H, etc., but most of the devs have addressed these issues and either offer patches or include the fix in the ROM.
So do I have to flash a radio or the radio sticks after a ROM flash? Any recommended ROMs for TMOUS with battery life/performance and Sense? Would like some good aesthetics but don't need any crazy features.
BUMP.......
I wish they would separate the ROMS here: http://forum.xda-developers.com/showpost.php?p=16281566&postcount=2
Just click on every single one. Look at user If hes from USA in the first post.
Your radio will stick after flashing a new ROM. Just make sure you always flash the RIL file matching your radio version.
Edit: you shouldn't have to worry about whether the ROM is tmous based if you flash the appropriate RIL file.
Sent from my HTC Sensation 4G using XDA App
Super CID allows any rom to be flashed as stated above
moh0 said:
Your radio will stick after flashing a new ROM. Just make sure you always flash the RIL file matching your radio version.
Edit: you shouldn't have to worry about whether the ROM is tmous based if you flash the appropriate RIL file.
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Where do I find RIL/how do I know? Do all devs have diff RILs?
I'm using InsertCoin 2.2.2 with latest radio, you don't need to flash any RIL and it is working good in TMOUS. I didn't see any problems.
Sent from my HTC Sensation Z710e using XDA App
hah2110 said:
Where do I find RIL/how do I know? Do all devs have diff RILs?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1202867
Just download the one for tmous. Chefs don't usually state which RIL they have cooked in their roms. Get in the habit of flashing the RIL whenever you switch roms.
Flashed LeeDroid on my wife's phone without updating the radio that Lee really recommended. So it has whatever radio that shipped on it to T-Mobile US and she has had no problem whatsoever.
Sent from my LG-P999 using XDA Premium App

[Q] cm7 radio?

I flashed cm7 a while back (the only stable version available at the time. not sure if it's still the same), and could get hspda (H symbol). I went back to the stock rom and have recently tried testing out some different radios but can't seem to get hspda. I realize that the symbol isn't exactly a great indicator, but could it be that i'm not using the same radio as the one included in cm7? i'm using the kd1 radio now, which is working okay, but i'd really prefer a better signal either way.
anyone know either 1) what radio is best to use in canada?, or 2) what radio is used in cm7? i've tried the hspda tweak already too. thanks
CM7 does not come with a radio. The radios come with the stock rom and/or via OTA's. Usually the latest radio is going to be the best. Some people will find an older radio may work better. There is a sticky that lists all the radios. Pick the latest for your device and give it a try.
Sent from my Nexus S 4G using xda premium
I for sure didn't flash a radio after flashing cm7 though, so there had to have been something that came with it. i'll try out a few different radios to see which I like. do you need to do the hspda tweak every time you flash a new radio?
yeah the H is just a tweak in the CM7 rom.
Roscopcoletrain said:
yeah the H is just a tweak in the CM7 rom.
Click to expand...
Click to collapse
damn. i'll just have to keep flashing radios then lol. thanks

[Q] 727r rom / kernel / modem combo for WIND

I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
WORKING(more or less) COMBOS:
R34P3ReX_T989_Skyrocket_Conversion - Juggernaut_50_0218 - Tmo_SGH-T989_KID_radio
Gingerbread base, gyroscope tilts screen wrong way, a bit buggy, but works
CM10, CM10, T989UVLH1
Works well enough, having Call issues though. Going to try a new radio
Cyanogen always gets terrible battery. Going to look for an optimized version but not a problem for me
CM10, Blaze 4G UVLH5
Calling worked, I could hear caller, but they heard a lot of garbled blarky. Not good
u don't need a specific ROM or kernel at all, all u need to do is try different t radios. try the uvle1 from the t989 aka Hercules subsection, and give the modem someone dumped from the i757m bell version to see if u can catch a signal. I strongly believe the later will work
pileot said:
I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
Click to expand...
Click to collapse
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
df186 said:
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
Click to expand...
Click to collapse
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
I have been running SkyJB 4.1.2, and Blaze LB7 in Southern Ontario, picking up Wind signals. Speeds are okay, still trying to find the best combo, but that combo works.
kr4tos said:
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
Click to expand...
Click to collapse
flash the radio twice,no cable plugged in before flashing rom, might help
df186 said:
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
Click to expand...
Click to collapse
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
pileot said:
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
Click to expand...
Click to collapse
if it was built for t989 specific phones it wont install because of the assert
u dont need a t989 rom anyways, but if you want to try them out make sure the updater script doesnt have the assert function and do the rotation fix
I'm using the i727r (Rogers) running CM 10.1. I'm still on Rogers using the stock radio for now. Is there any consensus as to which radio file to flash for best results?
I know this thread is a little stale, but I figured I would throw in my two cents.
I have an i727r, unlocked. Right now I am running PACman Rom (http://forum.xda-developers.com/showthread.php?t=2178402) with the Blaze LB7 radio (4th from the bottom here: http://forum.xda-developers.com/showthread.php?t=1895400). They said I shouldn't be able to run an ICS radio with a JB Rom, but somehow it seems to be working. Note that the radio was on there before flashing PACman.
The kernel showing up in my phone info is the one that came with the PACman Rom, 3.0.72-cyanogenmod. I know this because before flashing PACman over stock, the kernel was 3.0.8.
Having said all that I'm thinking about updating my radio, probably to UVMB1. I'm not sure if I should bother though. I have a Nexus S, which is designed as an AWS phone out of the factory, and when I put my SIM card in that phone, the speedtest results are the same as what I'm getting right now with the LB7 radio on the Skyrocket. So I'm not sure I'd gain much by updating. :/
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
droiduzr2 said:
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
Click to expand...
Click to collapse
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
wraith79 said:
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
Click to expand...
Click to collapse
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Edited: UVMB1 as well
icenight89 said:
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Click to expand...
Click to collapse
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
You will, or already have had issues you're not aware of.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
Edited, UVMB1, the NEW Blaze 4G radio from this thread seems to work as well:
http://forum.xda-developers.com/showthread.php?t=1895400
But like x said, u had issues u just weren't aware of them. Problems don't just APPEAR for no reason.
this threads getting confusing.
ucmc1 and uxuma7 is for rogers and att users on cm10.1
if using unlocked skyrocket for other carriers then you would need compatible jb radio for the new/unlocked carrier for cm10.1 based roms
so for tmo/wind etc you would need UVMB1 for the AWS bands, there are other jb radios for telus, bell but don't know if/how well they work on said carrier.
so if your carrier uses the same frequency's as tmo then UVMB1 seems to be what users are reporting success with.
if your carrier is using same frequency as att/rogers then the ucmc1 or uxuma7 radio is what you need
correct me if im wrong
^^^ this is exactly what I said except in a more detailed explanation .
icenight89 said:
^^^ this is exactly what I said except in a more detailed explanation .
Click to expand...
Click to collapse
good, i just needed a confirmation so i can add that info and a link to this post in the radio section of the 1stop sticky

Categories

Resources