Few days ago I receive new OTA update 2.10.401.5 on my HTC DESIRE S Europe.
But, after i download the update and continue to install the update after the update finished my device stack at the boot splash screen. my HBOOT version is still 6.98.1002. I don't know what could be the problem? I revert it to the old 1.47.401.4 software version via RUU, but I really don't know why the update failed?
Will somebody please answer my question?
another one??
Jesus Christ...could be problem because ur s-off or maybe htc screwed something ..but cache must be cleaned before reboot thats for sure
You use stock ROM before install the new one?
Adidas108 said:
another one??
Jesus Christ...could be problem because ur s-off or maybe htc screwed something ..but cache must be cleaned before reboot thats for sure
Click to expand...
Click to collapse
I think it's S-OFF. Because the latest updates request/demands for you to have HBOOT 2.xx.xx for it to work?
that's revolutionary hboot.
ota update need at least hboot 0.98.2000.
Meanwhile in this thread ...
OP tries to install official firmware on his security off'd phone, what a moron.
You need the official hboot (not s-off, not rooted, STOCK, 2.00.0002) to ensure the OTA works properly (it will of course work without it, but when we tried, certain aspects of the ROM didn't work correctly).
ifelse( is_ship_bootloader(getprop("ro.bootloader")) == "t" , < More ways to laugh at OP.
I solve the problem!
Skanob said:
I think it's S-OFF. Because the latest updates request/demands for you to have HBOOT 2.xx.xx for it to work?
Click to expand...
Click to collapse
Big thanks to u guys.
I was using this tutorial http://forum.xda-developers.com/showthread.php?t=1187231
I had to S-ON back again and after that perform the update.
It's because the HBOOT version is 6..89.*** and it need to be 0.98.0000 or something.
Trust me! It was fully working for me.
Now I have the new stock 2.3.5 rom on my DS with sense 3.0
There one other problem. I couldn't find any tolls which can gain S-OFF on the new HBOOT 2.*****
So at this stage you can't gain root on mine and your DS with the new ROM.
totiadrenalin said:
Big thanks to u guys.
I was using this tutorial http://forum.xda-developers.com/showthread.php?t=1187231
I had to S-ON back again and after that perform the update.
It's because the HBOOT version is 6..89.*** and it need to be 0.98.0000 or something.
Trust me! It was fully working for me.
Now I have the new stock 2.3.5 rom on my DS with sense 3.0
There one other problem. I couldn't find any tolls which can gain S-OFF on the new HBOOT 2.*****
So at this stage you can't gain root on mine and your DS with the new ROM.
Click to expand...
Click to collapse
Good job!
No S-OFF for that version of hboot. but you can still unlock it to flash customer roms, recovery. radio wouldn't update on mine.
So I am returning to stock from this build:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio:/ 11.22.3504.07_M
Hboot: 1.27.1100
And I have a few questions because reading the guides just didn't help me:
1. I can't understand completely the name of the RUU's: RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe
1.27.401.3 - is this HBOOT version?
10.42.9007.00P_10.11.9007.15 - This is radio but why does it have 2 values?
192183- What is this?
2.
If you have S Off, this doesn't matter, but you should always try to flash the oldest RUU, so that it is easier to S Off later, unless you don't intend to perform S Off again.
Click to expand...
Click to collapse
I am S Off and I want to return my phone to S-on for warranty purposes then S-Off again so I must flash the oldest RUU right? If it is this is the situation how to determine the oldest RUU by HBOOT version?
3. Firmwares? What about them does the RUU overwrites the firmware should I downgrade firmware before flashing older RUU and can it be done? Is there such thing as firmware and RUU compatibility? If there is which firmware corresponds to which RUU, the firmwares have version that are not mentioned anywhere else?
4. Which RUU's I can flash and which I can't? I mean what should I look for to be suitable? Should I install RUU that has the same HBOOT version as mine or I can install older like I am ICS and I want to install GB RUU so I can S-Off easier latter?
So I am a little confused about downgrading and picking suitable versions of everything.
I decided to try without matching anything just downloading the RUU with the oldest hboot and flash it. It's RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe and my device info is in the beggining of the thread. So in FASTBOOT i run .exe and I get
error: -5001. Please make sure you have finished any previous setup and closed other applications.
Click to expand...
Click to collapse
Is the problem with compatibility or something else?
Okay seems I've asked too much. Well I want to understand all those things but for now this is what I need to know:
Will flashing this RUU: RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed.exe
On this Phone:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio: 11.22.3504.07_M
Hboot: 1.27.1100
Will be successful and can I S-off and Root again easy latter?
SsBloodY said:
So I am returning to stock from this build:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio:/ 11.22.3504.07_M
Hboot: 1.27.1100
And I have a few questions because reading the guides just didn't help me:
1. I can't understand completely the name of the RUU's: RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe
1.27.401.3 - is this HBOOT version?
10.42.9007.00P_10.11.9007.15 - This is radio but why does it have 2 values?
192183- What is this?
2. I am S Off and I want to return my phone to S-on for warranty purposes then S-Off again so I must flash the oldest RUU right? If it is this is the situation how to determine the oldest RUU by HBOOT version?
3. Firmwares? What about them does the RUU overwrites the firmware should I downgrade firmware before flashing older RUU and can it be done? Is there such thing as firmware and RUU compatibility? If there is which firmware corresponds to which RUU, the firmwares have version that are not mentioned anywhere else?
4. Which RUU's I can flash and which I can't? I mean what should I look for to be suitable? Should I install RUU that has the same HBOOT version as mine or I can install older like I am ICS and I want to install GB RUU so I can S-Off easier latter?
So I am a little confused about downgrading and picking suitable versions of everything.
I decided to try without matching anything just downloading the RUU with the oldest hboot and flash it. It's RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe and my device info is in the beggining of the thread. So in FASTBOOT i run .exe and I get Is the problem with compatibility or something else?
Click to expand...
Click to collapse
SsBloodY said:
Okay seems I've asked too much. Well I want to understand all those things but for now this is what I need to know:
Will flashing this RUU: RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed.exe
On this Phone:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio: 11.22.3504.07_M
Hboot: 1.27.1100
Will be successful and can I S-off and Root again easy latter?
Click to expand...
Click to collapse
1. RUU naming convention
RUU_Pyramid_<an extra LE in the name if XE>_HTC_<country/cariier>_<rom main version>_Radio_<radio version>_release_<release version>_signed.exe
dont bother about release version ..we dont need that
the only concerns are ..
country/carrier -> which determines the cid
rom main version ->explains whether youy are on GB or ICS (lesser the version ..older it is ...only between same country/carrier RUU's)
radio version -> tells the radio
2.oldest RUU ..ive explained earlier ..the main version should be least ..but this comparison is only valid if the country/carrier matches
eg:
in case of
RUU_pyramid_tmous_1.52.xx
and
RUU_pyramid_europe_1.27.xx (you cant say which one is oldest)
3.no firmware questions when we are talking about RUU (firmware arises when you talk about custom roms)
RUU has everything ...it wipes everything and converts it to stock (RUU cant touch the SOFF and CID though ..they can be changed only manually ..i.e. by we doing it manually by commands)
4.which RUU ..is you decide by CID ...
if you are supercid ..and dont know the original cid
you need to select the RUU based on your country and carrier
there is an excellent guide on RUU and it explains everything
here is the link to it ...do read it
(it helps you in finding right RUU too )
RUU RELEATED INFO AND FLASHING GUIDE
also remember by flashing RUU ..you wont lose SOFF ...unless you change it manually ..to know how to change it please refer the above guide
also i believe this answer ..answers your second post questions too
Thanks a lot! But I still got the problem with error I mentionted in the 1st post (error 5001) I tried with 1.27 and 1.28 HTC-Pyramid-Europe. What should I do is flashing through safe mod possible.
Sent from my HTC Sensation using xda app-developers app
SsBloodY said:
Thanks a lot! But I still got the problem with error I mentionted in the 1st post (error 5001) I tried with 1.27 and 1.28 HTC-Pyramid-Europe. What should I do is flashing through safe mod possible.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
im confused
did you mean you solved it ? or are you asking me how to bypass that error ?
anyways
you need to keep the phone connected to pc in bootloader/fastboot and then run the RUU.exe
Also ..if you did HTC-DEV unlock ..relock the bootloader (fastboot oem lock) and run the RUU.exe
I can't solve the problem. I connect it in bootloader/fastboot and try to run the RUU.exe. And I did revolutionary S-OFF.
Hey no idea that
error: -5001. Please make sure you have finished any previous setup and closed other applications.
is pretty annoying.
What is the CID currently on the phone ?
The RUU with xxx.401.xxxx IRC will require SuperCID (11111111) or a CID of HTC__001.
1.27... will end up installing HBOOT 1.17.0008 (just gone through the process on my replacement replacement phone.
As mentioned earlier you'll keep S-OFF and your existing CID after installing the RUU.
As far as the comms are concerned have you got the latest HTC drivers on the PC ?
---------------snip-------------
anyways
you need to keep the phone connected to pc in bootloader/fastboot and then run the RUU.exe
Also ..if you did HTC-DEV unlock ..relock the bootloader (fastboot oem lock) and run the RUU.exe
---------------snip-------------
I've recently run a few RUUs on my phone to get to a state where I could have a carrier backup, just in case (I forgot to get one immediately after S-OFF/custome recovery, doh). At no point did I re-lock the bootloader, I unlocked it (HBOOT 1.27.0000) and it's stayed unlocked the whole time, always worked perfectly. I also didn't have the phone in bootloader/fastboot mode, it was just on the home screen, again worked perfectly. I guess YMMV.
I am super CID.
gol_n_dal said:
I've recently run a few RUUs on my phone to get to a state where I could have a carrier backup, just in case (I forgot to get one immediately after S-OFF/custome recovery, doh). At no point did I re-lock the bootloader, I unlocked it (HBOOT 1.27.0000) and it's stayed unlocked the whole time, always worked perfectly. I also didn't have the phone in bootloader/fastboot mode, it was just on the home screen, again worked perfectly. I guess YMMV.
Click to expand...
Click to collapse
regarding RUU running normally ..you should have usb debugging enabled ..and need to have proper drivers too to recognize the device ..
running from fastboot no hassle there.. (most 155 errors can be prevented from running from fastboot)
couple of people were thrown error 99 when they ran RUU with unlocked bootloader ..so relock is a safer bet to prevent that error too
hEY GUYS
I have been running custom android roms for about 2 months. I rooted when i was running 3.32 firmware on my sensation but it didnt s-off. and i learnt about JB-wiretrick which offcourse doesn't work. my sensation is also not supercid.
Anyways i just want to s-off and upgrade to 3.33 firmware.
I have heard that firmware upgrade simply isnt possible while s-on.
I want to downgrade to 1.17 and use revolutionery method to s-off.
will it be possible ?
Guys and Devs i really need your help
alishan said:
hEY GUYS
I have been running custom android roms for about 2 months. I rooted when i was running 3.32 firmware on my sensation but it didnt s-off. and i learnt about JB-wiretrick which offcourse doesn't work. my sensation is also not supercid.
Anyways i just want to s-off and upgrade to 3.33 firmware.
I have heard that firmware upgrade simply isnt possible while s-on.
I want to downgrade to 1.17 and use revolutionery method to s-off.
will it be possible ?
Guys and Devs i really need your help
Click to expand...
Click to collapse
Firmware UPGRADE is possible on SON, just flash 3.33.x RUU. However firmware DOWNGRADE can only be done on S-OFF so the only way to S-OFF 3.xx firmware is JB wire trick which works as long as you get the timing right so you may need to attempt it several times before success
someone told me otherwise
Jonny said:
Firmware UPGRADE is possible on SON, just flash 3.33.x RUU. However firmware DOWNGRADE can only be done on S-OFF so the only way to S-OFF 3.xx firmware is JB wire trick which works as long as you get the timing right so you may need to attempt it several times before success
Click to expand...
Click to collapse
Actually Kohr-Ah, the man behind user freindly firmware told me that firmware upgrade will fail on device with S-ON. and i also didnt risk because i thought it will brick my device
Have you tried it on S-ON device ?
alishan said:
Actually Kohr-Ah, the man behind user freindly firmware told me that firmware upgrade will fail on device with S-ON. and i also didnt risk because i thought it will brick my device
Have you tried it on S-ON device ?
Click to expand...
Click to collapse
If you do as I told you to and flash a 3.33.x RUU, the firmware will be upgraded. what kohr-ah meant is that you cant flash a PG58IMG firmware file while S-ON but I know for a fact S-ON users can flash RUU
One more question
Jonny said:
If you do as I told you to and flash a 3.33.x RUU, the firmware will be upgraded. what kohr-ah meant is that you cant flash a PG58IMG firmware file while S-ON but I know for a fact S-ON users can flash RUU
Click to expand...
Click to collapse
Thanks alot JONNY for your continued support :good:
I am downloading 3.33.x ROM from http://forum.xda-developers.com/showthread.php?t=1529941
However thread says to install firmware located http://forum.xda-developers.com/showthread.php?t=1412618
It means i shall still have to flash file PG58IMG.
Should i proceed with both steps
Neither of those is an RUU so wont work. This thread is maintained by Football and contains all RUU's available for HTC Sensation/XE/4G. Just download the 3.33.401.6 RUU exe file and run from a windows pc
Jonny said:
Neither of those is an RUU so wont work. This thread is maintained by Football and contains all RUU's available for HTC Sensation/XE/4G. Just download the 3.33.401.6 RUU exe file and run from a windows pc
Click to expand...
Click to collapse
I have found two files located HERE
http://www.filefactory.com/file/msp...0U_11.24A.3504.31_M_release_266171_signed.exe
and
http://www.filefactory.com/file/3dc...0U_11.24A.3504.31_M_release_266172_signed.exe
which file should i download ?
Is there any DIRECT DOWNLAD which is resumable ?
alishan said:
I have found two files located HERE
http://www.filefactory.com/file/msp...0U_11.24A.3504.31_M_release_266171_signed.exe
and
http://www.filefactory.com/file/3dc...0U_11.24A.3504.31_M_release_266172_signed.exe
which file should i download ?
Is there any DIRECT DOWNLAD which is resumable ?
Click to expand...
Click to collapse
There's a mirror on one of the last few pages for the 3.33.401.6 one - cant link it sorry, Im on phone atm
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor. Currently service provider is Koodo - a division of Telus (in Canada).
CID: ROGER001
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
arjundas86 said:
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor.
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
Click to expand...
Click to collapse
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
LS.xD said:
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
Click to expand...
Click to collapse
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
arjundas86 said:
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
Click to expand...
Click to collapse
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
LS.xD said:
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
Click to expand...
Click to collapse
Thanks for the toolkit.
cid: ROGER001
Btw, what's the purpose of going SuperCID?
Also, I don't want to install lower hboot. I am on hboot 1.08 and I think I need to install hboot 2.15. Right?
I guess S-OFF isn't absolutely necessary, but would be nice to have. Would you recommend using the S-OFF command from the toolkit you linked?
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
With superCID you can switch to other CIDs e.g. for unbranding your device Also it's needed for "Facepalm S-OFF" (Was the only working method for me)
Sent from my loved HTC One S using (most time buggy) Tapatalk
LS.xD said:
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29
I would appreciate any insights into what would be the applicable RUU?
Thanks.
arjundas86 said:
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29
I would appreciate any insights into what would be the applicable RUU?
Thanks.
Click to expand...
Click to collapse
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
LS.xD said:
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
Click to expand...
Click to collapse
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
arjundas86 said:
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
Click to expand...
Click to collapse
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
LS.xD said:
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
Click to expand...
Click to collapse
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
arjundas86 said:
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
Click to expand...
Click to collapse
To run a RUU NOT MATCHING your stock CID you need S-OFF // SuperCID. You cant install TMobile RUU at first :/
I would act like this:
Run latest Rogers RUU --> READ FACEPALM GUIDE CAREFULLY. There is how to gain SuperCID and then S-OFF. Once done you can change CID to whatever you want and run a (unbranded) RUU with HBoot 2.15.
But that is just what i thought about it. I suggest to let someone else CONFIRM the way suggested by me first.
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
@Rapier
thank you for the provided help as usual
Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
LS.xD said:
...Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
Click to expand...
Click to collapse
For you? NO. You're better than me
The story is like this. I bought the phone in 2012. At that time, the highest hboot was 1.14 I believe (don't remember exactly) and there was no S-Off method available (they appeared later). There was something else tho. The lower hboots (1.09 and lower) permitted to write in the kernel partition or radio partition like an S-Off device. HTC then covered this in the higher hboots. So even if there was no S-Off method, there was a downgrade method that was used to downgrade the hboot from whatever you had to 1.09 or below. I downgraded mine to 1.06...don't ask why I didn't choose 1.09, I thought that was the RUU I considered to be fine for me at that time.
Now being on hboot 1.06 I can do anything except I cannot flash firmwares directly. So I cannot flash a new hboot with red letters removed for example. But I don't care about this...I can flash radios or kernels or splash screens like any S-Off user. The procedure for getting latest firmware and S-Off seems a little bit risky and I've read about alot of issues or problems from people who failed or tried countless times to reach that. So I've asked myself why should I do that if I don't need it?
Then it came the rumor and there were some brick cases of devices that were having some Android 4.3 ROMs and were not on latest firmware (in the meantime 2.13 and 2.15 hboots arise and also the S-Off method). It proved to be not the firmware fault after all. But CM team has included a check in the updater script of the ROM ZIP, to validate if the hboot was 2.13 or 2.15...if not, the flash won't happen. It's a simple assert command present there at the beginning of the script that do the check. As CM team was the pioneer in having the newest Android version ROMs available, everybody based initially their ROMs/builds on CM...so the check in the script was automatically carried over to all the ROMs out there. And it's still here.
As I've tested and I could run fine those ROM's (by removing the check before flash), I noticed that this requirement does not apply to everyone. Some could run fine the ROMs even if they're not on the "latest" firmware.
So that's why I am on 1.06...cause I don't know why should I go through some risky procedures when I don't need to.
Rapier said:
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
Click to expand...
Click to collapse
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
Rapier said:
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
Click to expand...
Click to collapse
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
LS.xD said:
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
Just IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
Click to expand...
Click to collapse
Yes, you're right. That's what I meant. I will delete the updater-script lines that Rapier mentioned before trying to install CM11.
If it doesn't work, at least I can restore to my backup, without risk of bricking.
Then I can try the hboot update and s-off if required.
Thanks.
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444....
Click to expand...
Click to collapse
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't want
arjundas86 said:
...I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
It's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
BUT, if you're NOT going to upgrade your firmware and you'll be lucky to have the ROM working, you won't need to S-Off since your current hboot is lower than 1.09 and allows you to flash radios and kernels directly from recovery.
And at this point, as you said, it worth a try like you are now and only if it's not working like this you should upgrade and do S-Off. I guess is much easier and less risky to remove 4 lines from that script and flash the ROM to see if it's working, than to go through the firmware upgrade & S-Off procedures
Rapier said:
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't wantIt's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
Click to expand...
Click to collapse
Hey Rapier,
I'm having trouble doing getting the zip signed.
I tried the zip signer you had in your guide, as well as a bunch of other zip signing programs, but none of them seem to do the job. I keep getting Error: Status 7.
Not getting bootloops or anything like that, so I was able to restore to my backup. No harm done.
Hello!
Need a signed stock firmware 2.21 or 2.19 from AT&T.
CID - CWS__01
Can any1 help?
i need s-off but i cant do it on 2.22
surely no one have it?
IkiZ said:
Hello!
Need a signed stock firmware 2.21 or 2.19 from AT&T.
CID - CWS__01
Can any1 help?
i need s-off but i cant do it on 2.22
Click to expand...
Click to collapse
So what is your plan with a firmware?
If you are not s-off you can do absolutly NOTHING with a firmware.
This means with s-on you can´t go back neither with the firmware nor with the h-boot (wich is normally a part of the firmware).
You MUST go s-off before you can downgrade your firmware that´s the point.....also if your CID is matching
geets
shivasrage said:
So what is your plan with a firmware?
If you are not s-off you can do absolutly NOTHING with a firmware.
This means with s-on you can´t go back neither with the firmware nor with the h-boot (wich is normally a part of the firmware).
You MUST go s-off before you can downgrade your firmware that´s the point.....also if your CID is matching
geets
Click to expand...
Click to collapse
Downgrading of hboot on s-on phones with the signed firmware from OTA is commonly used procedure ...
iourikil said:
Downgrading of hboot on s-on phones with the signed firmware from OTA is commonly used procedure ...
Click to expand...
Click to collapse
Oh really ? I never heard of that but I´m very interested about the process..
so can you please discribe exactly how to downgrade the firmware(h-boot, radio etc.) on HTC ONE MINI
with s-on if this works and is commonly used it would be great to hear more about that...
(so till now I was quite sure that you can´t downgrade to a lower version with an RUU)
http://hafizimtiaz.wordpress.com/20...android-4-4-2-to-android-4-3-return-to-stock/
and yes I know its for M7 but in this direction I think the rules for the M4 are the same.
Or does he mean a standalone firmware.zip wich is included in the OTA dumps?
If yes how it could be flashed? hmmmmm.....via fastboot?
greets
im s-off and also trying to downgrade, mainily to get my camera fixed. any method to downgrade would help alot
romy134 said:
im s-off and also trying to downgrade, mainily to get my camera fixed. any method to downgrade would help alot
Click to expand...
Click to collapse
To downgrade the firmware when you are s-off is no problem....it´s done in a few minutes...
So what´s going wrong with your downgrade?
In the Theory We can do downgrade with s-on. So anyone have the signed firmware from ATT?