Database Info

[Q] Is there a complete stock AT&T Rom for 2.3.6?

I have looked on the site and cant find a complete stock rom for AT&T? If there is one can someone provide a link.
Thanks,
GJ

http://forum.xda-developers.com/showthread.php?t=1548750

So I would just boot into CWM recovery and then install the zip?

1. Nandroid your current setup (so you get back to where you are now)
2. put all the zips you plan to flash on your sdcard
3. reboot to CWM Recovery
4. flash new modem (if you're planning on changing your modem)
5. wipe data / factory reset
6. wipe /cache partition
7. under "Mounts and Storage", Format /system
8. under "Advanced", wipe Dalvic Cache
9. flash rom zip
10. flash kernel zip (if not in rom above)
11. reboot
read through the DEV section under [ROM].. and read the OP (post 1)... each DEV gives recommended steps for flashing zip (CWM) or flashing tars (ODIN). You may also want to use Darkside Superwipe to ensure you clear all previous rom traces prior to flashing new rom.

Quick question about flashing CM9 on Galaxy S plus

Hey guys.
I want to flash the latest CM9 (beta5) on my unmodded factory Galaxy S plus.
This is my plan of attack:
1- Backup Sdcard on PC (pictures, music, videos, etc)
2- Clear Sdcard
3- With Odin, flash FeaModRecovery 1.2
4- Backup everything with CWM on Sdcard then copy backup to PC
5- Format phone and Sdcard (dalvik cache, /system, /data, /cache etc)
6- With Odin, install recovery-clockwork 6.0.1.5
7- Flash CM9 beta5
8- Flash gapps as said here: http://forum.xda-developers.com/showthread.php?t=1825260
9- Reboot phone and voila
I didn't knew anything about flashing my phone up until a couple of hours ago. I've been reading a lot on how it's done and this is what I came up with.
Is this ok??
edit: or do I have to install recovery clockwork 6.0.1.5 first and then start formatting everything?

[Q] [HELP]AOSP android keyboard not working.

i install CM10 Alpha4 then flash gbapps.
suddenly this F****** AOSP android keyboard always popup.
i use this step.but still popup occurs
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset. (MUST DO THIS STEP)
4. Select the ROM zip from your SD Card and flash.
4a Auto rebooted into recovery, (if show error on mounting /cache, and cant mount manually in mount and storage, do wipe /cache
4b. Go to Advanced -> Reboot Recovery
4c. Select the ROM zip from your SD Card and flash again
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata ( you wouldn't find this in CWM 6 so just ignor)
7. Flash Google Apps.
8. Reboot

1.flash XXKPE+Pit
2.flash XXKPE without pit
3.flash DDLF2
4.flash CF-ROOT DDLF2
5.goto cwm
-wipe data
-wipe cache partition
-goto advance wipe dalvik cache
6.install cm10a4
-don't reboot
7.install Gapps
8.reboot
9.wait untill 5 minutes
10.final reboot
:good:

i have a problem with my galaxy s019003, i cannot find the keyboard.
Kindly i need help

custom Rom install never works!

Hey guys,
General custom Rom question. Each time I install any custom, following the directions 100% it will never install properly. No matter what when I reboot back into TWRP it doesn't mount data.
Here's some instructions for an example from the latest one I tried Havok.
What am I doing wrong?
How to install
+ if you are coming from OOS then you will need to wipe your data as well as internal storage due to encrypted data but if you had any custom ROM before then just wipe data. No need to wipe internal storage.
for updating
1: Flash ROM
2: Flash TWRP installer
3: reboot again to recovery to boot from second slot.
4: Flash Gapps
5: Flash magisk
6: wipe dalvik cache and reboot to system.
That's all.

use tool all in one to decrypt internal storage

[GUIDE] How to remove Encryption and Flash Any ROM without Wiping/formatting Internal Storage

As Thread title says, Guide for how to remove Encryption and flash any ROM if you are coming from Encrypted storage without wiping Internal Storage...
Requirement :-
1. Pitch Black recovery :- Download
2. No-Verity-Treble :- Download
3. fstab-ext4-noencrypt :- Download
4. Decrypted/patched Vendor ZIP :- Download
Steps to do it :-
1.Download Pitch Black Recovery
2. Flash it through existing recovery & reboot to recovery
3. After you enter pin & Recovery UI comes in, go to Wipe section the select Advanced wipe
4. Select Dalvik, cache, data & FBE Cache & wipe them
5. Now go in Tools & select Pin/Pass Remover, Flash it and done
6. Reboot into Recovery & it won't be asking for any password which means now we have unencrypted storage..
How to flash ROM on decrypted storage :-
1. Download Decrypted Vendor ZIP, Pitch Black Recovery, ROM, Gapps, Magisk (Optional), No-Verity-Treble & fstab-ext4 zip & Copy them into Device
2. Reboot Into Recovery
3. Wipe > Advanced Wipe > Select Cache, Data & Swipe to wipe it(No need to Wipe Internal storage)
4. Flash Decrypted Vendor ZIP, ROM, Recovery & Reboot to Recovery
5. Flash Gapps, Magisk, No-Verity-Treble & Reboot to System(If fails to boot or reboot into recovery, wipe cache & flash fstab-ext4 zip & reboot)
6. Done
When installing New Update
1. Download ROM Update ZIP, Recovery, Gapps, Magisk(optionsl), No-Verity-Treble & fstab-ext4 zip & Copy them into Device
2. Reboot Into Recovery
3. Flash ROM, TWRP & Reboot to Recovery
4. Flash Gapps, Magisk, No-Verity-Treble & Reboot to System(If fails to boot or reboot into recovery, wipe cache & flash fstab-ext4 zip & reboot)
5. Done
All the feedback/suggestions/complaints are welcomed..
Credits :-
@HatRiGt for No-Verity-Treble Zip
@Siddk for Pitch Black recovery

I had to do format my internal storage to get it working...but eventually it works ..now my phone is unencrypted.. Thanks for ur work.

raj3534 said:
I had to do format my internal storage to get it working...but eventually it works ..now my phone is unencrypted.. Thanks for ur work.
Click to expand...
Click to collapse
Hence it didn’t work you didn’t need to flash all of those zip but just format data.

Will this work for OnePlus 6T?