As Thread title says, Guide for how to remove Encryption and flash any ROM if you are coming from Encrypted storage without wiping Internal Storage...
Requirement :-
1. Pitch Black recovery :- Download
2. No-Verity-Treble :- Download
3. fstab-ext4-noencrypt :- Download
4. Decrypted/patched Vendor ZIP :- Download
Steps to do it :-
1.Download Pitch Black Recovery
2. Flash it through existing recovery & reboot to recovery
3. After you enter pin & Recovery UI comes in, go to Wipe section the select Advanced wipe
4. Select Dalvik, cache, data & FBE Cache & wipe them
5. Now go in Tools & select Pin/Pass Remover, Flash it and done
6. Reboot into Recovery & it won't be asking for any password which means now we have unencrypted storage..
How to flash ROM on decrypted storage :-
1. Download Decrypted Vendor ZIP, Pitch Black Recovery, ROM, Gapps, Magisk (Optional), No-Verity-Treble & fstab-ext4 zip & Copy them into Device
2. Reboot Into Recovery
3. Wipe > Advanced Wipe > Select Cache, Data & Swipe to wipe it(No need to Wipe Internal storage)
4. Flash Decrypted Vendor ZIP, ROM, Recovery & Reboot to Recovery
5. Flash Gapps, Magisk, No-Verity-Treble & Reboot to System(If fails to boot or reboot into recovery, wipe cache & flash fstab-ext4 zip & reboot)
6. Done
When installing New Update
1. Download ROM Update ZIP, Recovery, Gapps, Magisk(optionsl), No-Verity-Treble & fstab-ext4 zip & Copy them into Device
2. Reboot Into Recovery
3. Flash ROM, TWRP & Reboot to Recovery
4. Flash Gapps, Magisk, No-Verity-Treble & Reboot to System(If fails to boot or reboot into recovery, wipe cache & flash fstab-ext4 zip & reboot)
5. Done
All the feedback/suggestions/complaints are welcomed..
Credits :-
@HatRiGt for No-Verity-Treble Zip
@Siddk for Pitch Black recovery
I had to do format my internal storage to get it working...but eventually it works ..now my phone is unencrypted.. Thanks for ur work.
raj3534 said:
I had to do format my internal storage to get it working...but eventually it works ..now my phone is unencrypted.. Thanks for ur work.
Click to expand...
Click to collapse
Hence it didn’t work you didn’t need to flash all of those zip but just format data.
Will this work for OnePlus 6T?
Related
i install CM10 Alpha4 then flash gbapps.
suddenly this F****** AOSP android keyboard always popup.
i use this step.but still popup occurs
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset. (MUST DO THIS STEP)
4. Select the ROM zip from your SD Card and flash.
4a Auto rebooted into recovery, (if show error on mounting /cache, and cant mount manually in mount and storage, do wipe /cache
4b. Go to Advanced -> Reboot Recovery
4c. Select the ROM zip from your SD Card and flash again
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata ( you wouldn't find this in CWM 6 so just ignor)
7. Flash Google Apps.
8. Reboot
1.flash XXKPE+Pit
2.flash XXKPE without pit
3.flash DDLF2
4.flash CF-ROOT DDLF2
5.goto cwm
-wipe data
-wipe cache partition
-goto advance wipe dalvik cache
6.install cm10a4
-don't reboot
7.install Gapps
8.reboot
9.wait untill 5 minutes
10.final reboot
:good:
i have a problem with my galaxy s019003, i cannot find the keyboard.
Kindly i need help
Hi, there! This is a little guide of how to install CyanogenMod and CyanogenMod based ROMs. I've created this thread to could add a compatible guide to our device to this other thread.
1 - If your device is in stock ROM:
1. Download your desired ROM, you can find some links here.
2. Download GApps compatibles with your ROM, you can find it here or here.
3. Put the files (ROM and GApps) on root of external storage of your device.
4. Enter in recovery mode.
5. Select and confirm the wipe data/factory reset and wipe cache partition.
6. Select apply update from external storage.
7. Select the ROM file and confirm the process.
8. After installed, select the GApps file and confirm the process.
9. Now select reboot system now and wait. Note that first boot takes some time, wait at least five minutes.
2 - If you are upgrading or switching CyanogenMod ROMs:
1. Download your desired ROM and put on root of external storage of your device.
2. Enter in recovery mode.
3. Select and confirm the wipe cache partition.
4. After wipe cache partition, go to advanced and choose wipe dalvik.
5. Select install zip from sdcard and choose zip from external sd;
6. Select the ROM file and confirm the process.
7 .Now select reboot system now and wait. Note that the boot can takes some time, but not that much.
PS: to install the CyanogenMod 11 by Team Canjica you have to follow these steps.
eduds said:
Hi, there! This is a little guide of how to install CyanogenMod and CyanogenMod based ROMs. I've created this thread to could add a compatible guide to our device to this other thread.
1 - If your device is in stock ROM:
1. Download your desired ROM, you can find some links here.
2. Download GApps compatibles with your ROM, you can find it here or here.
3. Put the files (ROM and GApps) on root of external storage of your device.
4. Enter in recovery mode.
5. Select and confirm the wipe data/factory reset and wipe cache partition.
6. Select apply update from external storage.
7. Select the ROM file and confirm the process.
8. After installed, select the GApps file and confirm the process.
9. Now select reboot system now and wait. Note that first boot takes some time, wait at least five minutes.
2 - If you are upgrading or switching CyanogenMod ROMs:
1. Download your desired ROM and put on root of external storage of your device.
2. Enter in recovery mode.
3. Select and confirm the wipe cache partition.
4. After wipe cache partition, go to advanced and choose wipe dalvik.
5. Select install zip from sdcard and choose zip from external sd;
6. Select the ROM file and confirm the process.
7 .Now select reboot system now and wait. Note that the boot can takes some time, but not that much.
PS: to install the CyanogenMod 11 by Team Canjica you have to follow these steps.
Click to expand...
Click to collapse
Good tutorial for new peoples.
HOW TO INSTALL CUSTOM ROM ON C2+STEPS:-
Root Your deviceFrom here- v1 & v2
Install Custom Recovery -
Then download install custom recovery of your device.WE Having Two Types Of Recovery-
HERE IS GUIDE FOR INSTALLING CUSTOM RECOVERY--
ClockWorkMod v5.5.0.4 Recovery-
http://forum.xda-developers.com/micr...overy-t2327786
Philz Touch Recovery-
http://forum.xda-developers.com/micr...overy-t2364465
[OPTIONAL]INCREASE PARTIION:-,AS Some custom roms such as xperia full & color os etc. require more space to install so you have to increase system partition.Do this process from here
Download rom and put it in root of your SD card or internal sd.
Backup Your Data & ROM VIA CWM(as your Wish) & reboot into recovery.
Do wipe data and factory reset,then wipe cache partition.
Do dalvic cache clear and the from advance menue format system.
Now go back and choose install from sd card and choose your rom.zip and select install.
After install finish reboot your device or it may reboot automatically.if a patch comes with your rom then install that also.
Finished,Enjoy your new rom,if you Find bugs then ask your rom developer.And If You Like Rom Then HIT THANKS
CREDITS-
ALL THE OP OF LINK MENTIONED ENJOY THE CREDIT.
Sorry mate when i press wipe data/Factory reset.. ..all that happens after is (NO COMMAND)..
oh Got it mate sorry i think i need to root the phone first
UltimAOSP
If you choose to use these, you are doing that on your own risk, and I can not be held responsible for any damage you made to your phone.
UltimAOSP is a port rom from H9001
INSTALL INSTRUCTION:
To flash a new ROM properly, you need a custom recovery (CWM for example)
1. Reboot to recovery.
2. Do a nandroid backup or backup in cwm.
3. mount USB Mass Storage and delete from sdcard these three directories:
.android_secure
Android
LOSTDIR4. Copy ROM zip or zips on sdcard
5. Eject mass storage from computer and then unmount in recovery
6. wipe all/factory reset or pre-flash wipe in recovery
7. wipe or erase dalvik cache
8. flash zip from sdcard, choose ROM zip, flash it and reboot.
That's all, this is the correct way to flash any new ROM in any phone thru recovery.
Click to expand...
Click to collapse
Rooted : Yes
Languages : All
reserved
Mirror Links
* UltimAOSP v1.1.0
Thank you for this rom :good:
I will try it. Are there gapps?
Think about posting it to needrom.com
Hey guys,
General custom Rom question. Each time I install any custom, following the directions 100% it will never install properly. No matter what when I reboot back into TWRP it doesn't mount data.
Here's some instructions for an example from the latest one I tried Havok.
What am I doing wrong?
How to install
+ if you are coming from OOS then you will need to wipe your data as well as internal storage due to encrypted data but if you had any custom ROM before then just wipe data. No need to wipe internal storage.
for updating
1: Flash ROM
2: Flash TWRP installer
3: reboot again to recovery to boot from second slot.
4: Flash Gapps
5: Flash magisk
6: wipe dalvik cache and reboot to system.
That's all.
use tool all in one to decrypt internal storage