Related
Hi all,
I have been using the wm series smartphone for a while. namely trinity, orbit and now orbit2/cruise/polaris.
I would like to know whether fellow orbit 2 users are having the same problem with the screen as I have.
The angle is fine from everywhere else except from top down towards the phone. Everytime i have to adjust the screen so that i am looking at it from bottom up to get a good view of the screen. When looking from top down, I get discolored views darken pictures. Any degree of top down angle, and the screen goes discolored. I have encountered this problem with lighting or no lighting conditions in the enviroment. So it is really irritating when taking pictures. And especially when I am watching movies.
I would like to know if there is a software fix for this or is it a manufacturing fault.So I can send the phone back for an exchange before its too late.
Hope you experts out there have an answer to my question!
Thank you so much.
i sent 2 orbits back due to screen being naff. both occasions the screen wasn't fitted squarely in device, so appeared off-centre. in all my browsing before i sent these back i couldnt find any apps to adjust screen (like you'd get on a topend lcd monitor).
i also noticed that viewing images/videos in landscape mode the screen had a shimmer across it, really weird. plus, the first two screens had like an oily slick between the membrane and screen,, not impressed at all, bad build quality too with stellar and orbit 2.
good luck! i'd send it back, and be prepared to send your next one back too !
badaas said:
i sent 2 orbits back due to screen being naff. both occasions the screen wasn't fitted squarely in device, so appeared off-centre. in all my browsing before i sent these back i couldnt find any apps to adjust screen (like you'd get on a topend lcd monitor).
i also noticed that viewing images/videos in landscape mode the screen had a shimmer across it, really weird. plus, the first two screens had like an oily slick between the membrane and screen,, not impressed at all, bad build quality too with stellar and orbit 2.
good luck! i'd send it back, and be prepared to send your next one back too !
Click to expand...
Click to collapse
Yo, badass, that is some bad decision we have made buying the orbit 2. I wonder why hasnt more people complained about the screen problem orbit 2 has. Or is it just a batch problem where, the manufacturing ran out of lcd stock and changed to a sh*tty lcd we have here. So the case might be we are have a bad batch of orbit 2.
I really dunno what to do, really am disappointed. Loved this phone so much. Done so much upgrades, modding, ultimate launch, S2U2 and everything to make it work like a nice working phone like iphone.
BesidesTHe touchscreen is not reponsive i think is a common problem to all polaris and orbit 2 users, sigh. So much hacking to do just for it to work properly. They should have done the hacking before hand. Dunno what the people at HTC/O2 is doing.
Anyone else has a good suggestion ?
Regards.
So year i dropped my phone in the bathroom and cracked the screen and now i can only see a tiny portion of the screen. Considering i also have the newton ring on my phone i think its time for a new lcd and digitizer. Would someone with experience in this area take a look at the following link and let me know if this is all i need for a replacement.
http://cgi.ebay.com/OEM-Replacement...wItemQQptZPDA_Accessories?hash=item41473b5370
You didnt say what phone you have!
If you have a Touch Pro then it looks right - i believe the fuze screen is slightly different (no front camera) so if you use this screen on the fuze you may see something through the camera lens.
I replaced mi display , it took me 2 hours to do it, but finally it worked fine. The only issue was the new display has a different color, the digitizer just worked perfect, even better than new, but the color is different, now the colors are less vivid and less brighter, I will try to adjust the display color settings, I will do it tonight.
oh wow good eye didnt even notice that. i guess ill go with this one i just found.
http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6
hey GussMiami, do you DIY your screen replacement?
I would like to replace my LCD by myself, but I do not know how to do it,,, tried to youtube it with 'replace touch pro lcd screen' or some thing like that but came up nothing.
tq before,,,
ps: if I have blue spots on my screen, is it some kind of dead pixels?
Xue v.2 there are a couple of guides around on replacing the screen http://www.att-phones.org/att-htc-fuze-user-manual.html
I ordered a new Digitizer and LCD for my Fuze yesterday as mine is somewhat scratched up, the job does not look particularly easy, at the moment I am debating finding someone else to do it for me vs possibly wrecking my phone doing it myself, from what I have read the hardest part is making sure not to break any cables/wires (commonly I see people breaking the speaker wires).
oh thank you naiku,
well, I think I will buy the lcd+digitizer for 30usd from ebay and have htc care to replace it for me,,,
plus I need to fix the keyboard as well. Let the pro doing the fix LoL
I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
Hi Devs, Members and Guests, how you doing? To be honest I was doing well until my LG G2 cracked on the top just a bit and now I can't pull my notification bar or do any operations on the top of the phone...
I re-created with Paint what happened to the top of my phone:
((check the attachment of "How My Phone Is.jpeg"))
The red and orange is exactly where the crack of the phone is, not that thick, however it's noticeable. The black marked area is where you the phone does not operate (you touch it and it doesn't do anything). The green line is safe area. Also, I'm running CM11 (recommended for any LG G2 users) with TWRP and runs very good.
Now the problem is that I really need my phone fully working again.. It works but I have to do some weird stuff so I can at least text someone. So here I got some questions that you guys can help me out:
1) How much you guys think it is to fix the screen?
2) Is it possible to change the resolution or the display in the phone so it will be displaying the ROM in the working area of the phone? Here is what I mean by that:
((check the attachment of "Question.jpg"))
3) Any other solutions you guys got?
Thanks for all of you who read and those who can reply and help. Have a good day
First off, fixing the phone will cost you, if you do it yourself, around $60-$70 bucks. That is for the LCD+Digitizer+mid body assembly. And that is by far the easiest way to repair the phone. You just switch all your internal parts from your old assembly over to the new assembly and pop your back cover on. Easy breazy. I just did this myself and my phone is now working great. As for your second question about changing the resolution, no. You can change your resolution but it will not "shrink" your screen to the usable portion. Your only option is to replace the LCD and Digitizer.
Hi All... Been a while since I posted here on XDA and hoping for some assistance.
My S6 recently seems to have an issue with the screen (mainly on whites) where there is a dark streak that runs vertically on the left side of the screen from top to bottom and slightly to the right on the bottom (makes an L shape) that seems to ONLY be noticable in NATURAL light.
What I mean is under any lamps or fluorescent lighting it is not noticible or very minimally but as soon as it's in the sun it's as plain as day.
I've taken screen shots of the issue and even in the screenies, it's only noticable in natural sunlight and not in "fake light" so I don't know if posting a screen shot will help but I have none the less.
Has anyone e else had this issue and if so has there been a way to fix it?
I'm wondering if anyone else has this same issue and if so has anyone been able to fix it?
Please let me know...
Thanks,
Hey, I am currently using my galazy s6, I watched your screenshot but actually, even when I am in sunlight I cant see a problem, so the problem is in your screen itself and when you take a screenshot and send it, no one can see it ( like when your screen is cracked.) So your screen might be faulty, I think you need to go to where you purchased it and hope for replacement.
Thanks for the reply. Ya... I've gone back and they have seen the issue but if course since I've had the phone for more than 2 weeks they won't do a replacement on the phone and want me to send it for manufacturers warranty. I even have the extended warranty that I pay 10 bucks a month for but NOW they told me that if I want to use that I would have to pay a 250 dollar deductible for a replacement...
I just don't understand why it's only noticible under sunlight?...