Does anybody knows where i can find the coating of the micro usb port? As you can see on the picture i have a break in it.
I searched already but i dont find these coating.
Mfg
I think, hat it is one piece with the back housing. You should be able to find it on Google. But if i remember right its not that easy to replace.
And also be aware of loosing your waranty by switching it..
Gesendet von meinem HTC Desire mit Tapatalk
domsch1988 said:
I think, hat it is one piece with the back housing. You should be able to find it on Google. But if i remember right its not that easy to replace.
And also be aware of loosing your waranty by switching it..
Gesendet von meinem HTC Desire mit Tapatalk
Click to expand...
Click to collapse
Thx, but my waranty is gone anyway because now it must be older than 2 years.
Everybody who searches these part too
Click Here
Its called back bottom cover
domsch1988 said:
I think, hat it is one piece with the back housing. You should be able to find it on Google. But if i remember right its not that easy to replace.
Click to expand...
Click to collapse
It's fastened with two little screws - you need a T5 Torx screwdriver to loosen/fasten them.
Very easy.
http://viewitem.eim.ebay.fi/HTC-DESIRE-BRAVO-6200-A8181-OEM-BOTTOM-COVER-HOUSING/330707216064/item
I just ordered this for total of 7,89 €.
Superglue held my antenna together about half a year. Then it cracked for good.
Related
Hey guys,
wanted to ask your for some tips for painting the Sensation (the backcover). I probably want to paint it in white and black. But I don't really know which kinds of colors I should take and how I can make sure that the color won't peel off.
Use some car spray paints. If you prepare it properly it should be fine.
Sent from my Blade using Tapatalk 2
chrisund123 said:
Use some car spray paints. If you prepare it properly it should be fine.
Sent from my Blade using Tapatalk 2
Click to expand...
Click to collapse
and how do I prepare it properly?
Gesendet von meinem HTC Sensation
.TanTien said:
and how do I prepare it properly?
Gesendet von meinem HTC Sensation
Click to expand...
Click to collapse
clear the surface of any debris with rubbing alcohol or a cleaning solution. spray a few coats of primer onto the case. when its dry, take some sandpaper (start with a bigger grit then get finer as you go) and start sanding away until its real smooth. then grab paint in colors of your choice (might have to do some masking if youre going with more than 1 color), and spray a few coats. depending on what type of paint you used, you may or may not have to use a clearcoat to get that shiny luster. big thing is PATIENCE, if you really want the paint to turn out good, youll have to take your time
aznprodgy said:
clear the surface of any debris with rubbing alcohol or a cleaning solution. spray a few coats of primer onto the case. when its dry, take some sandpaper (start with a bigger grit then get finer as you go) and start sanding away until its real smooth. then grab paint in colors of your choice (might have to do some masking if youre going with more than 1 color), and spray a few coats. depending on what type of paint you used, you may or may not have to use a clearcoat to get that shiny luster. big thing is PATIENCE, if you really want the paint to turn out good, youll have to take your time
Click to expand...
Click to collapse
This. The end result will be proportional to the amount of time you spend on the job.
Sent from my Blade using Tapatalk 2
i'll definitely try it. If it won't turn out very nice ill just buy a new battery cover. It's really not that expensive...
Sent from my gay and pink Unicorn
.TanTien said:
i'll definitely try it. If it won't turn out very nice ill just buy a new battery cover. It's really not that expensive...
Sent from my gay and pink Unicorn
Click to expand...
Click to collapse
I bought a second hand sensation for my missus, the back cover is pretty beat up so I bought her a new one and I'm gonna have a go at polishing up the ally and painting the plastics on the old one. Will post some pics if I get a decent result...
Sent from my Blade using Tapatalk 2
Remember that the holes in the back cover are for antennas and micros a think, so be careful when you paint them to not affect the signal strength
Enviado desde mi Sensation Z710e usando Tapatalk 2
DankoFGL said:
Remember that the holes in the back cover are for antennas and micros a think, so be careful when you paint them to not affect the signal strength
Enviado desde mi Sensation Z710e usando Tapatalk 2
Click to expand...
Click to collapse
I don't think I will paint the plastic yet...
Sent from my gay and pink Unicorn
I tried taking off the plastic parts. I don't know how to take off the upper plastic part...
I'll probably do a new thread with pictures of the progress when i'll start...
Sent from my gay and pink Unicorn
Try to no disassemble nothing because wen you put all back together maybe it won't fit or not be the same
Enviado desde mi Sensation Z710e usando Tapatalk 2
DankoFGL said:
Try to no disassemble nothing because wen you put all back together maybe it won't fit or not be the same
Enviado desde mi Sensation Z710e usando Tapatalk 2
Click to expand...
Click to collapse
This is indeed important because the parts are quite tricky to pull off and if you paint it then the layers make the parts thicker specialy if you use primers/coats and final layer for a shiny effect. And the holes for the sensors are also small.
On ebay there are backcovers for a good price in few colors.
I used really fine sandpaper (1000) for the aluminium for making a chrome look also very nice.
Youtube has many 'how to...' movies which were very helpful for me.
Hi,
I've put a TPU case on my N5 without removing the IMEI first. It fit's well, but will it wear out the case (..as the sticker makes the phone slightly thicker)?
I dont think so. I Didnt remove the imei stickers on both my nexus 4 and my nexus 5 and my cases are fine
Sent from my Nexus 4 using Tapatalk
That sticker was one of the first stuff I removed . Don't see the point in keeping it ...
kraven001 said:
That sticker was one of the first stuff I removed . Don't see the point in keeping it ...
Click to expand...
Click to collapse
My case is pretty hard to remove. That's my reason atm
Gesendet von meinem Nexus 5 mit Tapatalk
if you have it in place already forget about it ! I don't see how a small sticker would damage anything.
Im from the UK and have looked everywhere to try and find a place that sells the original stock self healing back cover that came with the phone.
I lost the original, can anyone please help.
vuittion said:
Im from the UK and have looked everywhere to try and find a place that sells the original stock self healing back cover that came with the phone.
I lost the original, can anyone please help.
Click to expand...
Click to collapse
here i found a original Backcover on Amazon Germany
http://www.amazon.de/dp/B00X7RJBT4/ref=cm_sw_r_udp_awd_kytEvb6D6P49W
Thank you very much.
vuittion said:
Thank you very much.
Click to expand...
Click to collapse
this is the solution:
http://es.aliexpress.com/store/produ...391861749.html
i actually ordered one, i will tell you what was in terms of shipping time and quality.
Great! Thanks!
Hey where can I find the back cover? The aliexpress link doesn't work
Sent from my LG-H950 using Tapatalk
randrew87 said:
this is the solution:
http://es.aliexpress.com/store/produ...391861749.html
i actually ordered one, i will tell you what was in terms of shipping time and quality.
Click to expand...
Click to collapse
Sj12345 said:
Hey where can I find the back cover? The aliexpress link doesn't work
Sent from my LG-H950 using Tapatalk
Click to expand...
Click to collapse
This I think
http://goo.gl/nD7GMK
got mine
http://forum.xda-developers.com/album.php?albumid=5138&pictureid=49932
the two red ones i orderd ,the grey one is original ,looks like these covers are made with the same mould( i work in plastics so i should know)
at least materials are the same pc/abs,and the type lgz2 is in all 3 off them.
also found another link ,think he charches way to much
http://www.ebay.nl/itm/Original-LG-...kplate-Rear-Genuine-replacement-/151709619623
Got mine too.
http://forum.xda-developers.com/album.php?albumid=12395
Just like Wiro i ordered both red versions (flamenco and volcano red). One came with a dented usb cutout and no infrared cap, but the other is pretty nice. The color of both covers looks identical, yet it is different from my original red cover, but only slightly. The original red cover i have has a more metal look. I just want this phone to last me some time so grabbing some spare parts isn't a bad idea.
hope it helps you guys.
infared port
WittePens said:
Got mine too.
http://forum.xda-developers.com/album.php?albumid=12395
Just like Wiro i ordered both red versions (flamenco and volcano red). One came with a dented usb cutout and no infrared cap, but the other is pretty nice. The color of both covers looks identical, yet it is different from my original red cover, but only slightly. The original red cover i have has a more metal look. I just want this phone to last me some time so grabbing some spare parts isn't a bad idea.
hope it helps you guys.
Click to expand...
Click to collapse
I would like to know which one came with the infared port? Also is it pretty to install the infared port in the one that's missing it? would appreciate your help, Thanks
akpirani83 said:
I would like to know which one came with the infared port? Also is it pretty to install the infared port in the one that's missing it? would appreciate your help, Thanks
Click to expand...
Click to collapse
i tried removing the infrared part of my old busted cover and putting it in the one wich came without and was dented near the usb port, figured that i'd first use that one instead of using the perfect one.
it fitted but you need something like a hot part of metal to melt the little pins that stick out a bit or the infrared part will fall out the whole damn time and the cover won't even fit.
The one that came with the infrared part is the red one on the aliexpress color selection.
The purple (wich is also red) came without infrared part for me and was dented near usb port.
Hope this helps.
Do those replacement covers also have the self healing feature coating and do they show the circular pattern on the back?
the original scratched so easely, and these replacements don't ... so i'm suspecious about my original cover in the first place.
the replacements do have a rubbery feel to them if you try to scratch them with your nail, so i suspect it has the coating yes.
far less scratches on the replacements then my original cover ...
WittePens said:
i tried removing the infrared part of my old busted cover and putting it in the one wich came without and was dented near the usb port, figured that i'd first use that one instead of using the perfect one.
it fitted but you need something like a hot part of metal to melt the little pins that stick out a bit or the infrared part will fall out the whole damn time and the cover won't even fit.
The one that came with the infrared part is the red one on the aliexpress color selection.
The purple (wich is also red) came without infrared part for me and was dented near usb port.
Hope this helps.
Click to expand...
Click to collapse
Thanks for all the info!
Which red? Flaminco or Volcano? The page now has red at the end of both so I can't choose the "red" version with the infrared part.
Yesterday I go to a store here in the PH and I saw this s7 edge. The home button is damaged and in person, it looks like a paint that is peeled of after scratching. So guys be careful with your device because this phone is soooooooooo fragile. Any thoughts?
Are you sure it's some sort of damage? It also looks like a pen marker?
Sent from my SM-G935FD using Tapatalk
That sure is a marker dot so that nobody locks it with their fingerprint as it is supposed to be a demo piece.
Sent from my hero2lte using XDA Labs
No, it isn't a marker. The button got a weak surface, if you try then you can peal of the color. The one year old daughter of a friend put the phone in her mouth and now there is a black point on the gold button.
Gesendet von meinem SM-G935F mit Tapatalk
Simone said:
Are you sure it's some sort of damage? It also looks like a pen marker?
Sent from my SM-G935FD using Tapatalk
Click to expand...
Click to collapse
saadramiz said:
That sure is a marker dot so that nobody locks it with their fingerprint as it is supposed to be a demo piece.
Sent from my hero2lte using XDA Labs
Click to expand...
Click to collapse
masterv1 said:
No, it isn't a marker. The button got a weak surface, if you try then you can peal of the color. The one year old daughter of a friend put the phone in her mouth and now there is a black point on the gold button.
Gesendet von meinem SM-G935F mit Tapatalk
Click to expand...
Click to collapse
Yep exactly what happens on the photo of @masterv1 it's like a painted plastic material on it.
JohnLouise said:
Yep exactly what happens on the photo of @masterv1 it's like a painted plastic material on it.
Click to expand...
Click to collapse
This is why i always go with black devices.
re: S7 Edge phone color
Semseddin said:
This is why i always go with black devices.
Click to expand...
Click to collapse
I like the black color too but for me the phone LOOKS
a lot more streamlined and futuristic when it's black.
When the phone is black it actually looks as if the entire phone
was molded out of one piece making it not only extraordinarily
beautiful but something which is so super futuristic that it looks
like something out of the startrek and star wars movies.
Have a great day!
Misterjunky said:
I like the black color too but for me the phone LOOKS
a lot more streamlined and futuristic when it's black.
When the phone is black it actually looks as if the entire phone
was molded out of one piece making it not only extraordinarily
beautiful but something which is so super futuristic that it looks
like something out of the startrek and star wars movies.
Have a great day!
Click to expand...
Click to collapse
Thread Closed
Please continue discussion here
TEKHD
Guys... Where on earth is our NFC antenna allocated? I've tried to connect various types of NFC stuff with zero success. Relp :3
The sensor is on backside on top of the Camara. U see a black point. When u don't have the original cover for the phone you can try without cover. The original cover is open on this place.
If it is not working is it maybe defect. I have the same problem with the mate 8. So it was in service, after service it works.
Now I have mate 9. Is much better.
Gesendet von meinem MHA-L29 mit Tapatalk
sascha__w said:
The sensor is on backside on top of the Camara. U see a black point. When u don't have the original cover for the phone you can try without cover. The original cover is open on this place.
If it is not working is it maybe defect. I have the same problem with the mate 8. So it was in service, after service it works.
Now I have mate 9. Is much better.
Gesendet von meinem MHA-L29 mit Tapatalk
Click to expand...
Click to collapse
Will try, thank you.
Is it turned on in the quick settings you should have a nfc logo on the top bar.
sutty86 said:
Is it turned on in the quick settings you should have a nfc logo on the top bar.
Click to expand...
Click to collapse
Yeah, I knew THAT, I just couldn't find the place physically where I should touch, it works now Thanks guys
Where is NFC antenna? It is on the motherboard or on back cover? My phone can interact with payment terminals but don't react to any bank cards. I think it's NFC antenna failure but I can't find it.