i´ve noticed that many have problems with SoD on cm7a7 with different roms. i´m on kyrillos v10 beta, and v.1.3 kernell. and i have that openfimg also. I got rid off that SoD by ticking off crt off animation on cyanogen screen options. before that my screen die atleast 3 times a day and didn´t wake up before reboot by powerbutton ( holding it for 10sec ) or taking battery off.
hopefully this helped someone...
kyrillos13 said:
Kyrillos' rom v10 (GWK74) Beta
Download=> Hotfile
Password: kyrillos13
Notes:
- I dont remember what i changed from Alpha4 but its faster and more reliable.
- Ondemand governor has performance fixes. If you want to save battery, install setcpu, go to advanced settings and set Sampling rate to 60000 & Up threshold to 95.
- Cpu default frequency: 100-800MHz
- CM kernel 1.3 Included (UV fixed)
- If your have the screen of death issue (if your phone doesnt wake up, and you have to remove the battery) flash this kernel: CM kernel 1.3 high_voltage // Mirror [Thanks to rkoby13]
- Recommended to update to this version if you run Alpha4!
- If you would like to donate, you can make a donation to Marcellusbe and/or Me.
Click to expand...
Click to collapse
^In case you missed, a solution was already posted long back.
i did update that kernell but still got SoD... wonder why? but as i said that simple solution did the trick for me. sorry for inconvience
As long as you've solved your problem, this can mean an alternative solution to SoD
Sent from my GT-I9003 using xda premium
what does SoD stand for?(sorry for the noob q)...even i am having this screen dying problem even after updating kernal to 1.3 h.v
metalfeild said:
what does SoD stand for?(sorry for the noob q)...even i am having this screen dying problem even after updating kernal to 1.3 h.v
Click to expand...
Click to collapse
Probably Screen of Death.
Yup screen of death
Sent from my GT-I9003 using xda premium
bscraze said:
Yup screen of death
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
actualy sleep of death
thats the one
Sent from my GT-I5800 using xda premium
metalfeild said:
what does SoD stand for?(sorry for the noob q)...even i am having this screen dying problem even after updating kernal to 1.3 h.v
Click to expand...
Click to collapse
Did u try that crt off animation thingy?
Sent from my GT-I5800 using xda premium
I also had this SoD problem and flashing the 1.3 H.V. kernel helped. Nevertheless the problem occurs sometimes but not as often as it occurred with the default 1.3 kernels.
I tried earlier kernells also but same problem occured. The best was that 1.3 h.v kernel. There is on that first post on cm7 that screen on animation doesn´t work, but screen off works... that made me wonder if the problem is there, i dont know how to c++ so devs maybe can see if there is a bug.
Sent from my GT-I5800 using xda premium
Related
I can't recall with all of the posts lately, but is there a voodoo lagfix for our beloved sgs4g? is there something stopping it from being applied? My coworker just got a charge and has a custom rom and kernel with lagfix already...
Just wondering if i missed something.
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Lagfix would be sick
Sent from my SGH-T959V using XDA App
fknfocused said:
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Click to expand...
Click to collapse
I'm sort of experiencing lag as well, but how are you overclocking?
Tegrak wouldn't let me do it, nor would SetCPU. It wouldn't go over 1GHZ.
~little off topic, sorry
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
fatherof4 said:
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
Click to expand...
Click to collapse
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Yeah setcpu does work once you've changed the frequencies in tegrak first.
I used tegrak on stock kernel overclocked to 1.4 and was also using set cpu before I flashed bali. All is still working w/ bali even set cpu.
Sent from my SGH-T959V using Tapatalk
danstheman7 said:
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Click to expand...
Click to collapse
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
de1packers said:
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
makavelicruz said:
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
Click to expand...
Click to collapse
mine did not, i get a vibrate at loading module then when i set the speed i get another vibrate. thats it. what are you trying to OC your phone at?
Mine did the constant vibrate once, although I don't recall what I was doing prior. Holding down the power button forced a reboot. Never happened again.
Also you will need to raise your voltages if you are going to go higher than 1.3 with pro.
Sent from my SGH-T959V using Tapatalk
I don't need it... I might deere a tiny bit of lag once in a while. I have linked it to the weekly Lookout scan so it's nothing to worry about. I, just wanted to ensure that I didn't miss anything. Thanks for the replies.
Sent from my SGH-T959V using XDA App
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
makavelicruz said:
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I know it drippings cool but why sacrifice the longevity of the cpu..i could understand it when the first gen phones were out but know that's just ludacris..
Sent from my SGH-T959V using XDA Premium App
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.
Battery life and stability not guaranteed
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
I have flashed this both on stock and on a custom KG2 rom, they both worked.
link removed because it was unstable - 1.28Ghz
Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F
3:55PM 8/3/2011
I provide no guarantees that this will work, make a backup before you try this!
This was really only made for all the kids who kept asking for an OC kernel.
It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel
Flashing right now . You beat me too it ;p
sduvick said:
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.
http://www.multiupload.com/WLONR4WAA6
Click to expand...
Click to collapse
I'll try adding in UV mods later, but I have to go home from work for now.
Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .
sduvick said:
I'll try adding in UV mods later, but I have to go home from work for now.
Click to expand...
Click to collapse
Check it again, teddy says it works
Sent from my SGH-T839 using XDA App
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
I knew i wasn't the only one .
JoshEwAhh said:
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Now that your at boot screen you have to ODIN to KG2
JoshEwAhh said:
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
I rebooted to cwm
Sent from my SGH-T839 using XDA App
Maybe its my rom, I'll do more testing
It's not your ROM cause with my ROM it doe's it & so doe's on teddy's ROM . Now my phone won't even recognize the PC>
sduvick said:
Maybe its my rom, I'll do more testing
Click to expand...
Click to collapse
Well it works on mine, so it's not broken entirely, so something has to be different here. pulling the link until its more tested.
Now that I think about it, the issue might have been that you were all on rfs, rather than ext4
if you can get back to CWM you can just flash the old kernel
Ok reflashed old kernel. All is well.
Sent from my SGH-T839 using XDA App
I odined back to stock and it still works... JoshEwAhh, what setup did you have before flashing?
Ginger clone and old bali kernel
Sent from my SGH-T839 using XDA App
Thats why. Gingerclone is KD1, this is for KG2 only.
ill update
Sent from my SGH-T839 using XDA App
Well, ths is cool, whats not cool is my comp wont even recognize my phone now..even in dl mode. at all. lol. yes..lol.
However im more then sure ill fix it no prob. this is pretty sweet though that its oc'ed now
I am trying to find out why my phone is doing this? Could it be a rom or kernel issue? I am running asop+ 2.2 rom and glados 2.7. Or could it be a radio issue?
Sent from my Nexus S using Tapatalk
Glados has a problem with rebooting while calling
It's a known issue in GLaDOS thread. However, some users get a lot of reboots, some never get one.
If you want a quick fix then try flashing another kernel.
Thanks any suggestions on kernals? I have had nothing but issues with matr1x and now it seems glados is giving me issues.
Sent from my Nexus S using Tapatalk
Known issues with GLaDOS. If you want to stay with GLaDOS, you can try:
-Up the voltage a bit if you are using liveoc (or disable liveoc)
-Don't overclock at all
-Disable deep idle
Or you could try matr1x again and maybe up the voltage 25mV across the board (except for 100 and 200mhz) as it is underclocked by default which your phone may not like. Otherwise i'd be trying netarchy, eugene's icup or francos kernel.
Harbb said:
Known issues with GLaDOS. If you want to stay with GLaDOS, you can try:
-Up the voltage a bit if you are using liveoc (or disable liveoc)
-Don't overclock at all
-Disable deep idle
Or you could try matr1x again and maybe up the voltage 25mV across the board (except for 100 and 200mhz) as it is underclocked by default which your phone may not like. Otherwise i'd be trying netarchy, eugene's icup or francos kernel.
Click to expand...
Click to collapse
Matr1x was a nightmare....but I will try some of the others.
Sent from my Nexus S using Tapatalk
djwyman said:
Thanks any suggestions on kernals? I have had nothing but issues with matr1x and now it seems glados is giving me issues.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
I'd suggest you start with Eugene's kernel (ICUP) because I have used it for a week without a single reboot
Disable deep idle, fixes most problems.
99 problems but a deep idle ain't one.
I switched to icup and it seems to be doing good. Thanks guys. I never had deep idle enabled so that was not my issue
Sent from my Nexus S using Tapatalk
djwyman said:
I am trying to find out why my phone is doing this? Could it be a rom or kernel issue? I am running asop+ 2.2 rom and glados 2.7. Or could it be a radio issue?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
I'd try to upgrade to ICS or reinstall the ROM. Also check your battery. It it heats abnormally, that might be the issue as well...
Aosp+ 2.2 is ics... but regardless changing kernels fixed the issue.
Sent from my Nexus S using Tapatalk
has anybody had this problem with the CM9 20p1 alpha? My phone rebooted twice just now. Really annoying!
zyrill said:
has anybody had this problem with the CM9 20p1 alpha? My phone rebooted twice just now. Really annoying!
Click to expand...
Click to collapse
I'm on cm9 a20p1 and glados 2.7 and not a single reboot in 1.5 days now. Still testing though.
Sent from my Nexus S using xda premium
djwyman said:
Matr1x was a nightmare....but I will try some of the others.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Couldn't handle the Matrix eh?
Haha
Is this v14.0?
Sent from my Nexus S using XDA App
Pretty ironic, considering if you read my thread most people are happy with 14.
Sent from my Nexus S using XDA App
Yeah idk why you would be having problems with matrix, I doubt it's the kernel.
flodb113 said:
I'm on cm9 a20p1 and glados 2.7 and not a single reboot in 1.5 days now. Still testing though.
Click to expand...
Click to collapse
Did you try to have prolonged phone calls as well? That's when it crashed... Every 3 minutes or so. The rest is perfectly fine...
Dear all,
The v1.8.1 kernel is ready!
I have been working hard these days to study on the touch panel source code and the auto-brightness source codes.
Progresses on the touch panel to make it more sensitive & a fix on auto-brightness are the major features of this v1.8.1 kernel. Below lists out the detailed features:
v1.8.1 (based on newest ZSLE6 kernel source)
==================================
- Support for all ROMs (including ZSKK5, ZSLE6, etc...)
- This kernel is not overclocked. In other words, stock frequencies are used
- Touch panel fully support 10 points multi-touch with better sensitivity
- Touch panel gets better performance under moisture & water drops
- Auto-brightness finally fine tune to an appropriate brightness level. Try it out!
- Doesn't support 2-way voice recording & off-machine alarm
- All features of v1.7 are kept, including Voodoo sound enhancements
Please kindly download the kernel below and flash through CWM recovery:
File: ardatdat_9103_kernel_v1.8.1_1G.zip
Link: http://www.mediafire.com/download.php?lbplsm7shse6f3c
Mirror: http://115.com/file/e7ym8ypx#ardatdat-9103-kernel-v1.8.1-1G.zip
MD5: 5E5F1EE84F295748CC167E3BFD6A52A4
Next step: OC version will be released after 1-2 weeks
v1.7 could be found there:
http://forum.xda-developers.com/showthread.php?t=1633345
Finally, flash at your own risk! Please feed back how you feel and don't hesitate to give me a 'thank' & donations if the kernel works great for you
(Please refer attached images for the explanations on the auto-brightness fine tune logic. According to the chart, this kernel will not go extremely dark nor extremely bright. Thus making a comfortable brightness adjustment. Please try it out!)
Is sound output is same as unknownzd kernel?
Sent from my GT-I9103 using Tapatalk 2
reserved...
xlm13x said:
Is sound output is same as unknownzd kernel?
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Sound quality is the same as my v1.7 kernel
Can u improve it as unknownzd kernel, ur kernel is smooth and have more features that him but sound effect have huge differences
Sent from my GT-I9103 using Tapatalk 2
xlm13x said:
Can u improve it as unknownzd kernel, ur kernel is smooth and have more features that him but sound effect have huge differences
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Have you tried my v1.7 kernel? It already included the Voodoo sound improvement that makes a huge difference when comparing with my older kernel versions.
Of course, the newest v1.8.1 kernel has also included Voodoo sound as well! Try it out!
Testing will report back soon.
Sent from my GT-I9103 using Tapatalk 2
Bass output is lilbit weak than unknownzd kernel. If possible look after it and try to improve it from unknownzds sources.
Don't wanna say anything just see the attached pic
Sent from my GT-I9103 using Tapatalk 2
Installed... Brightness is superb...
Sent from my GT-I9103 using xda app-developers app
xlm13x said:
Bass output is lilbit weak than unknownzd kernel. If possible look after it and try to improve it from unknownzds sources.
Don't wanna say anything just see the attached pic
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
wowo! great! you should include your fingers in the screen capture
Actually, I am already using the Voodoo sound enhancements from unknownzd kernel in my v1.7 kernel!!! You should download the Voodoo sound apk to control the base level, and etc. Thanks!
karthik050782 said:
Installed... Brightness is superb...
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Yes, I can say that the auto-brightness level is far more comfortable & reasonable than the stock one
I flashed the v1.8.1 kernel over ZSLE5 with Neo Rom v2.1 but I cant find any difference.. First of all it took a lot of time to boot.. Secondly, my overclock freq doesnt exceed 1ghz. Prev it was 1.3ghz... Third I cant find any new app or any thing.. is that ok??
kunaal2580 said:
I flashed the v1.8.1 kernel over ZSLE5 with Neo Rom v2.1 but I cant find any difference.. First of all it took a lot of time to boot.. Secondly, my overclock freq doesnt exceed 1ghz. Prev it was 1.3ghz... Third I cant find any new app or any thing.. is that ok??
Click to expand...
Click to collapse
Have you seen my #1 post first? Before flashing the kernel?
As I said, this time, I do not do any overclock, so the frequency is stock.
Second, it takes time to boot is the normal behavior that also happens on v1.7 because I have also cleared the cache & dv-cache during flashing.
Please read thoroughly at post #1 before flashing any things. Thanks.
Waiting for OC version ; any chance of GPU/RAM OC as in Cranium kernel ? I've also noticed that Nexus scores higher than GSII and GR mostly because of RAM speed.
I'm trying this new kernel, I installed it two hours ago, everything's fine for the moment.
I'm afraid of the problems I had with 1.7b2, the sleep of the death. At night, while it was recharging, it used to enter to a state where it wasn't possible to wake it up. I hope that's solved
The speed is very good and also the sound, if you use poweramp and increase the preamp level a bit, you'll not miss unkn music.
Auto brightness is much better.
Thanks ardatdat, very nice work!
Sent from my GT-I9103 using xda premium
ardatdat said:
- Doesn't support 2-way voice recording & off-machine alarm
Click to expand...
Click to collapse
Thanks once again for the new kernel buddy.
Any chance to enable Call Recording in future updates ? It's very useful.
Will I flash it over the v1.6? I want to upgrade it to v1.8.1
Please tell me how to do upgrade.
slyzzz said:
Will I flash it over the v1.6? I want to upgrade it to v1.8.1
Please tell me how to do upgrade.
Click to expand...
Click to collapse
AFAIK there's no need to flash v1.7 of the kernel you can directly flash the 1.8.1.
Hope this helps
ardatdat said:
wowo! great! you should include your fingers in the screen capture
Actually, I am already using the Voodoo sound enhancements from unknownzd kernel in my v1.7 kernel!!! You should download the Voodoo sound apk to control the base level, and etc. Thanks!
Click to expand...
Click to collapse
If I had two more fingers to take screenshot I would have surely done it.
I already have voodoo app and I m using settings which is perfect for me. Believe me buddy on same settings unknown kernel provides lil better results than urs. Maybe because of other tweaks u applied to kernel causing this
Sent from my GT-I9103 using Tapatalk 2
dragosh01x said:
Waiting for OC version ; any chance of GPU/RAM OC as in Cranium kernel ? I've also noticed that Nexus scores higher than GSII and GR mostly because of RAM speed.
Click to expand...
Click to collapse
I don't think we need gpu/ram oc we already have very powerfull deviice and by doing oc damaging hardware is not a good idea.
Sent from my GT-I9103 using Tapatalk 2
hello friends I have beta 3 CM10 and wifi it off whenever I have to reboot the phone and there is not another way to stay fixed, any solution? is a shame because in the last two versions is the same even with v2.2 cpu gpu kernel.
joni2012 said:
hello friends I have beta 3 CM10 and wifi it off whenever I have to reboot the phone and there is not another way to stay fixed, any solution? is a shame because in the last two versions is the same even with v2.2 cpu gpu kernel.
Click to expand...
Click to collapse
Hey.
No way to fix it just as yet.
Sent from my HTC Explorer A310e using xda app-developers app
is the only serious problem I see the truth which is a shame as the gpu and cpu kernel extraordinary