how to use adhesive tape? - General Questions and Answers

I've been trying to figure out the best way to use double sided adhesive tape that is being used in many phones today.
What is the best way to pill it after you adhere one side. it always seems impossible and always leaves some tape to glue on one another. This happens to me with cheap tape and even with 3M tape.
any suggestions?

.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.

Related

Touch screeen

if the lcd isnt attached to the digitizer with an adhesive and just put in together kinda lose in a way will the phone accept touch response?
Please use existing thread on same subject rather than starting new.
http://forum.xda-developers.com/showthread.php?t=668936
On that note thread closed.

How to glue plastic

Hey, this seems like quite a noob question but I broke my case, its plastic and I want to know if I can glue it back together, I can't buy a new one as they are very hard to find for my phone in my country. Can anyone give me some tips on how to glue it, what glue ect.
-------------------------------
Sent from a hole in the ground
Show appreciation
Hit Thanks
Methy lEthyl Ketone (MEK) will bond some plastics. Look for an adhesive containing that. When I work on swamp coolers, this is the main chemical in the bonding agents. That could work, but I don't know what kind of plastic is in phone cases. I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR PHONE. http://www.google.com/url?sa=t&rct=...kbCrU7S0ixuXDgNCg&sig2=RKxdYs_f8e0B_MyT25yseQ Here's a wikipedia link. Good Luck!

Help please Star A9220

Hy to all
I have a big problem and all this is my fault .I put the phone on the car seat and I was forced to brake abruptly and the phone fell and struck the support of the chair. After shock outer glass lens is broke as it is shown in the picture. Phone works perfectly all the buttons and menu are fully functional but it broke the outer glass lens . You can offer a solution can I change the outer glass lens or is too complex? Where i can find or buy replacement parts in particulary outer glass lens?In attachament you have the pictures. The phone is Star A9220 5 Inch Capacitive touchscreen MTK6573
Please give me a solution .
With regards
Bihoreanul
http://www.mobile-phones.cn/star-a9220-touch-screen-digitizer-repair-p-8964.html
Unfortunately I could not find a repair video....looks like you need to do some more Googling. With a no name device it is a lot harder getting this help.
I would assume that it would be like replacing the digitizer on my EVO.
I resolved
I bought an outer lens and was able to exchange a9220 phone screen . Can change smoothly .
.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.

Backside glass broken. Still water resistant?

Hi there,
my Z3 has a fine, long crack on the backside. It is hardly visible, but it is a crack.
Now I ask myself, if the phone is still water-resistant...
Thx
http://forum.xda-developers.com/showpost.php?p=56304276&postcount=29
Please post questions in the Q&A section
Thread moved

[Completed] [Q] S4 screen 'loose' screen assembly

When replacing my S4's lcd I also decided to replace the frame/chassis. I used double sidded 3mm tape around the edges so the glass would stick to the frame/chassis, though some of the tape has lost it's stickyness. The glass has somewhat lifted up (I can get my nail underneath and lift the glass, i'm unsure if the lcd lifts up too), the areas of which have lost their stick is around the top corners (mainly around where the LED is but i've noticed it along the whole top of the phone). I've tried lifting the glass slightly and putting some more tape underneath it which has not work, also, i've tried heating it up with a heat gun which also did not. I am contemplating using hot glue but a the time being I am still undecided if it will be effective.
Has anyone else face a problem similar to mine? If so how do you correct it? Does anyone have a solution or any tips? (please note that this device is not under warranty of any sort)
Hi, thank you for using XDA assist. The best place to ask is in your device specific forum. I'm not sure what version of the S4 you have so try one of these, http://forum.xda-developers.com/galaxy-s4-att or, http://forum.xda-developers.com/galaxy-s4
Thread closed.

Categories

Resources