Database Info

[Q] MIUI Kernal

Hello XDA
I am loving this new build for MIUI I am running the new 108050 and I was wondering what kind of Kernal I can run with this rom or if you can help me figure out my problems.
In the OP jface states that one of the bugs that needs to be fixed is get the kernal support up to date because it would support anything up until nightly 85
I have downloaded fauxs kernals from 3.3 onward and everytime I load the kernals I get no sound and things start to get buggy?
Does the new Rom have this kernal issue fixed or do I just have a special phone

Same here
Sent from my LG-P999 using XDA Premium App

Likely that it doesn't play nice with these kernels
Miui doesn't play nice with the CM7 Kernels. It has bugs, even wit hthe new version(I had two battery pulls yesterday and some apps don't run). I tred Faux's kernel and wasn't able to hear calls....so I stuck to stock. It almost works, and with it being so pretty, that's enough for me.

I had read somewhere that morfic's trinity kernals play are compatible with MIUI...but that the camera can get a little wonky at times- and i have experienced this with the 1.7.29 version where the colors get messed up- but has anyone tried the trinity kernal on the 1.8.5 yet?

Thank you for your response I really do love MIUI I just wanted to undervolt

2.3.7, Stock Rom, Rooted - Which Seat (kernel) should I take?

Hey Guys,
Figured I would draw on your collective knowledge and/or opinions.
My device is stock, just upgraded to 2.3.7, rooted, CWM 5.0.2.0.
I've peeked at the stickied thread with a list of kernels, but that hasn't necessarily helped me make a decision.
Mainly I am interested in over-clocking, however if there are some extras thrown in (such as the ability to actually use VPN with a PPTP VPN) that would be cool.
I'm not looking for a complete ROM, just the kernel.
Ideas?
Sent from my Nexus S 4G using XDA App

Nice Friday reference
Btw wrong section Haha.
Umm... I have a biased answer: Matr1x
Sent from my HTC Sensation 4G using XDA App

Wanted to add some more info:
Current Kernel:
$ uname -a
Linux localhost 2.6.35.7-gf5f63ef #1 PREEMPT Tue Aug 2 13:57:05 PDT 2011 armv7l
GNU/Linux
I'd rather not backrev my kernel if possible, unless there wouldn't be an issue running 2.3.7 with an older kernel (presuming 2.3.7 changed it).
Is there an easy way to back up my current kernel to revert to in case the new kernel install goes awry?
Sent from my Nexus S 4G using XDA App

[Q] Overclock with cm7.2 rom

for the longest time I have tried to OC my g2x without any luck. Probably the reason why it never OC was because I ran on the Cm7 generation roms. But because there was a recent update (cm7.2) I'm wondering if someone has figured out how to overclock with this rom.
Current phone stats:
Kernal: 2.6.32.55-cyanogenmod [email protected]
Rom: cyanogenmod 7.2.0 RC1 p999
Perhaps I can flash a new kernal that you guys can recommend and OC my phone.

vexatiousguy said:
for the longest time I have tried to OC my g2x without any luck. Probably the reason why it never OC was because I ran on the Cm7 generation roms. But because there was a recent update (cm7.2) I'm wondering if someone has figured out how to overclock with this rom.
Current phone stats:
Kernal: 2.6.32.55-cyanogenmod [email protected]
Rom: cyanogenmod 7.2.0 RC1 p999
Perhaps I can flash a new kernal that you guys can recommend and OC my phone.
Click to expand...
Click to collapse
Flash faux kernel. Oct through cm settings
Sent from my LG-P999 using XDA

Sorry to bother but do you mind linking me to his cyanogenmod Oc kernal page? He has so mamany I can't seem to find it

http://forum.xda-developers.com/showthread.php?t=1073626
Hit thanks
Sent from my LG-P999 using XDA

overclock cm9

So i just installed cm9, and my phone can only go to 1188mhz so how do i over clock because i know the sensation can go to 1.6

Install system tuner and try to raise the value. If not, install a kernel compatible with cm9 and u should be good.

On some of the early nightlies I was able to use faux123's 005b3 asop kernel and overclocked to 1.78. I only used it on a couple of the early nightlies. I tried flashing it a few days ago and got bootloops. I think that was on nightly 01, maybe 30.
Stock kernel works fine for me. Overclock will probably be available sometime down the road. Someone on cm9 dev thread is running faux's kernel now, apparently without problems. I guess YMMV, or maybe that should be MMMV.

Isn't there a kernel less than 1.78 like 1.67 or something. A 1.6 kernel should be ok and u don't need to turn it up to max.

Oomike said:
Isn't there a kernel less than 1.78 like 1.67 or something. A 1.6 kernel should be ok and u don't need to turn it up to max.
Click to expand...
Click to collapse
For CM9, faux is the only one that maybe works as far as I know. There is a mod over in the dev forum that overclocks to 1.5, I think. Haven't tried it, so I can't verify.

cm9 was great, but it wasn't stable yet and couldn't be over clocked
so i tried aokp that wasn't as good the screen looked too small and spaced out, but yo ucould over clock. And unfortunately without me knowing my phone was backing up my apps, ON MY DATA, so i owe virgin about 200$ now =_= for using 70$
In the end i went back to arhd, do yo uguy have any recommendation.

Use faux kernel 005b3 it will over clock it to 1.728.and it is stable and will run great.I have been running it for 5 days no problem.
Sent from my HTC Sensation using XDA

im still a noob at the wholle android thing, so how do you flash a kernal?

anthonyly said:
im still a noob at the wholle android thing, so how do you flash a kernal?
Click to expand...
Click to collapse
First make double sure the kernel is compatible with your rom and operating system and firmware . Then wipe cash.and dalvik cash, then flash like a rom. By downloading the Kernel to the root of your SD card and flash through recovery. I like 4 ext recovery. After wiping you install from SD card then reboot. Hope this helps.
Of course do the download first, then wipe, then flash
Sent from my Sensation 4G using xda premium

DLittle2012 said:
Use faux kernel 005b3 it will over clock it to 1.728.and it is stable and will run great.I have been running it for 5 days no problem.
Sent from my HTC Sensation using XDA
Click to expand...
Click to collapse
How is your battery life
Sent from my Sensation 4G

how do i check if its compatible?

just flashed faux123 newest kernal for the sensation with cm9, the only problem is that when i try mounting it to the computer, it unmounts the sdcard

Rasing and lowering your phones hardware Gigahertz.

Why when I flash a faux kernel no matter what version it is the Gigahertz always stay the same but when.I flash a bricked kernel no matter what version it goes up to 1.566 times 2.why doesn't the faux kernels ever raise the phones Gigahertz.I only had the Gigahertz go down 1 time with a faux kernel and that when I used the no frills,no thrills overclocking app.and I clocked it to 1.566 and it was killing my battery so I flashed faux kernel v005 and it took it down to 1.5.I couldn't declock it with the app became I found out that the app sucks and it stayed stuck at 1.566 which is 1.6.If anyone has ever experienced a similiar problem or know why these different problems occurred would you please let me know.and I have searched the internet before posting this. Thanks in advance.
Sent from my HTC Sensation 4G

Im absolutely not an expert so sry if my question seems a little stupid but are you flashing a working kernel for your phone??
Whats the name of the rom your running and whats your firmware?
Im running SmartDroids Beserk Rom with Brickeds Kernel and my Sensation XE is running like crazy... with normal batterylife...
clocked it for 584 mhz (min) and 1866 (Max) as std
Hope you´ll get you phone running soon...
Regards
/Lossi