I rooted my phone with SuperOneClick and that went well, when ahead and installed ROM Manager from the Market and flashed the CWM (T-Mobile version).
Then I was going to boot into recovery mode so I shut down and hit POWER + DOWN, did that, now my phone is stuck in ODIN MODE with the android logo and a message saying "Downloading...do not turn off target"
Under ODIN Mode
Product Name: SGH-I727R
Custom Binary Download: NO
Current Binary: Samsung Official
Any help?!
K so how did the phone get into dload mode and if there is no usb connected to it than just take out battery and power back ur phone again.
nutsngum said:
I rooted my phone with SuperOneClick and that went well, when ahead and installed ROM Manager from the Market and flashed the CWM (T-Mobile version).
Then I was going to boot into recovery mode so I shut down and hit POWER + DOWN, did that, now my phone is stuck in ODIN MODE with the android logo and a message saying "Downloading...do not turn off target"
Under ODIN Mode
Product Name: SGH-I727R
Custom Binary Download: NO
Current Binary: Samsung Official
Any help?!
Click to expand...
Click to collapse
Phew okay still works!
After I hit 'Flash CWM Recovery' in ROM Manager, do I need to reboot in recovery mode with ODIN? Any instructions to do so?
NO just hit flash in cwm in rom manager and let it flash in cwm and than do this to install rom.
appdroid said:
1Download rom.
2put it in sd card
3go to cwm
4clear data/factory reset 3 times
5clear cache 3 times
6wipe dalvik.
7Install Rom...
8.Reboot system now
9. Setup Your gmail (and Wifi if necessary)
10.Reboot to Clockwork
11.Install update and any other mod at this time
12.clear dalvik cache and cache partition
13. Reboot system now
14.Open Rom Manager and run Fix Permissions
15. Reboot When Complete .. and Wahlah
Ice Cream Nother Fu**ing Sandwich
Click to expand...
Click to collapse
nutsngum said:
Phew okay still works!
After I hit 'Flash CWM Recovery' in ROM Manager, do I need to reboot in recovery mode with ODIN? Any instructions to do so?
Click to expand...
Click to collapse
Do I not need to do this step first before I can install ROMs?
http://forum.xda-developers.com/showpost.php?p=21011261&postcount=5
no that will put u back stock and u will lose root.
nutsngum said:
Do I not need to do this step first before I can install ROMs?
http://forum.xda-developers.com/showpost.php?p=21011261&postcount=5
Click to expand...
Click to collapse
Ahhh got it - ok will back up then try to flash
When you say "Go to CWM" how do I do that exactly? Same with clearing the data/cache/dalvik?
Open up rom manager and select second option reboot into recovery. and there will be options in cwm about clearing data/cache and under advance you can clear dalvik.
nutsngum said:
When you say "Go to CWM" how do I do that exactly? Same with clearing the data/cache/dalvik?
Click to expand...
Click to collapse
Thanks! And when you install the add ones for the ICS, is it just the APKs that you need to put on your SD?
depends if its apk than you can install it regularly and if its .zip file you have to flash it through cwm. IT will say by file if its cwm flash able or apk. By the way you must be topped out on ur thanx rite haha cauz i don't see any.
Just wanted to know if this was ur first android. I am sure it is.
nutsngum said:
Thanks! And when you install the add ones for the ICS, is it just the APKs that you need to put on your SD?
Click to expand...
Click to collapse
appdroid said:
depends if its apk than you can install it regularly and if its .zip file you have to flash it through cwm. IT will say by file if its cwm flash able or apk. By the way you must be topped out on ur thanx rite haha cauz i don't see any.
Just wanted to know if this was ur first android. I am sure it is.
Click to expand...
Click to collapse
I have been thanking each one of your posts actually so maybe I am maxed out!
It is my first droid, came over from the Blackberry world
Oh man you have to learn a lot because there is nothing at all for blackberry that you can do. By the way I hate that ****ty keyboard they have on almost every phone. They suck in my opinion but my friend likes it idk y. I came from apple where i had jailbroken iphone and always did **** on that phone too.
nutsngum said:
I have been thanking each one of your posts actually so maybe I am maxed out!
It is my first droid, came over from the Blackberry world
Click to expand...
Click to collapse
Related
firmware v. 2.1 update 1
baseband v. 2.42.01.04.27
kernel v. 2.6.29
anything else needed to figure this out !
help please ?!?!?!?
i rooted it but it doesnt go into recovery mode ?!?!?!
xzxzx90 said:
firmware v. 2.1 update 1
baseband v. 2.42.01.04.27
kernel v. 2.6.29
anything else needed to figure this out !
help please ?!?!?!?
i rooted it but it doesnt go into recovery mode ?!?!?!
Click to expand...
Click to collapse
You should come over into our device forums for more help. You have to install a custom recovery before going into recovery mode. Install ROM Manager from the market then in the app select the flash recovery image option.
Sent from my HTC Hero making C.R.E.A.M.
okay so i rooted it then i went to rom manger and downloaded cm 7 then it asks to wipe data and back up rom that stuff i click yes then it asks to go into recovery mode and i say yes and then it gets stuck at white htc screen
xzxzx90 said:
okay so i rooted it then i went to rom manger and downloaded cm 7 then it asks to wipe data and back up rom that stuff i click yes then it asks to go into recovery mode and i say yes and then it gets stuck at white htc screen
Click to expand...
Click to collapse
Do have a way I can talk to you in live time, like a Skype?
i cant right now
do you know what im doing wrong ??
xzxzx90 said:
i cant right now
do you know what im doing wrong ??
Click to expand...
Click to collapse
Most likely. Did you flash a custom recovery image before trying to flash CM7?
i had it rooted before like 3 months ago then un rooted it and now im trying to do it again
do you know a solution to fix this ?
xzxzx90 said:
i had it rooted before like 3 months ago then un rooted it and now im trying to do it again
do you know a solution to fix this ?
Click to expand...
Click to collapse
Well follow these steps I'm about to give you. (I'm assuming you already have root privileges.) 1) Download ROM Manager. 2) Open ROM Manager and select the "Flash ClockworkMod Recovery" button. 3) Select the model "HTC Hero (CDMA)" 4) Once the recovery is flashed push the "Ok" button 5) Select the "Reboot into Recovery" option 6) Give Superuser permissions if asked 7) Select your ROM and flash it 8) Select your GApps and flash it 8) Reboot.
i click reboot into recovery also and it gets stuck in htc screen i cant access the recovery from the hboot screen also
xzxzx90 said:
i click reboot into recovery also and it gets stuck in htc screen i cant access the recovery from the hboot screen also
Click to expand...
Click to collapse
That means you don't have a custom recovery installed. Follow my instructions and flash the recovery image.
i click flash clockworkmod recovery and then it says successfully flashed clockworkmod recovery ! then it says : current recovery: clockworkmod 2.5.0.7 then i click reboot to recovery then ok then it boots and then it gets stuck at the white htc screen
xzxzx90 said:
i click flash clockworkmod recovery and then it says successfully flashed clockworkmod recovery ! then it says : current recovery: clockworkmod 2.5.0.7 then i click reboot to recovery then ok then it boots and then it gets stuck at the white htc screen
Click to expand...
Click to collapse
I need a better way of contacting you, so PM me contact info so I can reply faster.
It gets stuck at white HTC screen when going to recovery
Sent from my HERO200 using XDA App
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
here is the picture
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
ibaz said:
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
Click to expand...
Click to collapse
can any one see the picture at all??? because i cant ....
ok well now the phone is pretty much got stuck at the firmware screen as show in the picture...it got stuck like this after i install it with oldin
and when i choose install from zip my first choice is REMICS-I9003-V1.5 second is I9003XXKPE both wont install... it will just abort...after few second...
i have no idea what i have done totally new to this just dont want to paid local phone shop 50$ usd just to root it so try it my self
not sure what went wrong im a bit confuse with how to use oldin so maybe that the problem i saw there is PIT bootloader PDA phone and CSC...
not sure what to put
so at pit i uselatona 20110114.pit downloaded from XDA link
and PDA i use CM9 ALPHA8 GT I9003 PDA
that all i know...oh crap...
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
ibaz said:
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
Click to expand...
Click to collapse
i can boot into recovery mode and download mode
some other guy helped me out im able to got my phone working again i make mistake on odin file
so now my problem is how can i ICS on it... or at least with touchwiz 4 or something
all i want to do is to install REMICS-I9003-V1.5
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
ibaz said:
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
Click to expand...
Click to collapse
i went to this page but i dont know the step to install this rom.
starcraft2010 said:
i went to this page but i dont know the step to install this rom.
Click to expand...
Click to collapse
Step by step
1. Do Nandroid backup
2. Do a factory reset/data wipe (of course you can try to install the ROM over other ICS roms)
4. Install the ROM
5. Reboot (automatically)
6. Wait till full boot of your phone
Note: Do not Format Data after the installation of ROM. Just wipe cache and dalvik cache!!
Click to expand...
Click to collapse
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
i think ur internal memory may be corrupted so if u r under warrranty flash any stock rom and take it to the service centre so if really it its internal memory is corrupted they will replace the motherboard if u r under warranty.
Hetalk said:
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
Click to expand...
Click to collapse
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
starcraft2010 said:
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
Click to expand...
Click to collapse
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Hetalk said:
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Click to expand...
Click to collapse
no im not... i need more help on step 4 LIKE HOW TO INSTALL CWM firmware on normal android..stuff like that...
starcraft2010 said:
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
Click to expand...
Click to collapse
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
ganeshbiyer said:
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
Click to expand...
Click to collapse
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
starcraft2010 said:
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
Click to expand...
Click to collapse
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
ok sound great i assume if every thing is done correct i should be able to install the RemICS v1.5 then wish me luck
thanks man
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
well now i got a working normal unrooted GB 2.3.4 if i want to root it what are my step? i got ext4 format thingy and when i try to install the ICS it said abort again...
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Hetalk said:
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Click to expand...
Click to collapse
YO IM ON REMIS ics now but the problem now is it russian... and i cant read russian lol
any question is in here right? haha
What version of CWM recovery is in this? Maybe raver or someone who's flashed this can tell me.
Sent from my SGH-T959V
It uses TWRP as the thread title states.
Nice work Raver!
For those not familiar with the Aroma installer, there are some good options in the "Advanced" screen. For example, I don't know if Audiophile ICS preserves /data by default when flashing. Aroma lets you back it up during the install process.
If you have a modem that you prefer to the KJ6 modem that is bundled with this ROM, you may want to use the Advanced settings to disable the modem flash.
Additionally, TWRP will let you stack zips, so you can, for example, flash in one pass:
ROM
gapps
Your own modifications in a zip
Kudos to Raver for not packaging gapps and obeying the licensing requirements imposed by Google.
hi i just got this phone im coming from a samsung admire i have cwm installed on my galaxy s 4g how do i get twrp installed to flash this rom thanks in advance
dragon5944 said:
hi i just got this phone im coming from a samsung admire i have cwm installed on my galaxy s 4g how do i get twrp installed to flash this rom thanks in advance
Click to expand...
Click to collapse
Just install the rom zip. It will install twrp for you.
thanks for the quick responce do i need to wipe anything or just install
Amazing work raver. This is my favorite rom to date so far. It is running flawlessly for me. You once again have outdone yourself.
dragon5944 said:
thanks for the quick responce do i need to wipe anything or just install
Click to expand...
Click to collapse
you can just install if you want to keep anything do the custom install and then click backup data/restore data so it keeps your files in tact ... it will auto format system data cache for you
you will need to download a gapps package do to the fact i cannot include it in the rom itself i dont have a link for one but i think there is one floating around here.
ok i went to install the rom and my phone just resets
check md5 of your download if it matches try a reflash.
ok how do i do that im not used to flashing this phone yet my admire was easy to flash
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
dragon5944 said:
ok how do i do that im not used to flashing this phone yet my admire was easy to flash
Click to expand...
Click to collapse
reboot to cwm scroll down to flash zip from sd card choose the zip file click flash it will load aroma installer follow on screen prompts flash reboot profit ;P
got it love the rom but i dont have the play store app did i do something wrong
dragon5944 said:
got it love the rom but i dont have the play store app did i do something wrong
Click to expand...
Click to collapse
no u need the gapps pack u can get it from the link above my post.. just grab gapps for cm9 on that page and reboot recovery flash the gapps pack u downloaded and put on ur card reboot let it go from there
thanks for all the help i love this rom
dragon5944 said:
thanks for all the help i love this rom
Click to expand...
Click to collapse
yvw
Definitely a fun ROM!
I just noticed that Droid48 doesn't scale well to the "mini-tablet" format, but that is likely an app problem, not a ROM problem. Still totally usable, just funny to see the little calculator buttons and labels.
SuperUser didn't update properly for me through Play -- I'll see if I can reproduce later on.
I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?
KingMotion said:
I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?
Click to expand...
Click to collapse
Let me think about this. I don;t think you are bricked.
DigitalMD said:
Well first I must chastize you for not read probably the very first post here that warns peple not to use RomManager with these devices.
Click to expand...
Click to collapse
I accept chastization [?]
KingMotion said:
I accept chastization [?]
Click to expand...
Click to collapse
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?
DigitalMD said:
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?
Click to expand...
Click to collapse
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.
KingMotion said:
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.
Click to expand...
Click to collapse
If you can still get into CWM, then i would recommend you try flashing this stock ROM which is 4.1.1 JB
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
If you prefer to return to stock ICS 4.0.4 you can download the odin stock firmware here
http://www.hotfile.com/dl/170457040/052efe5/P3113UEBLH2_P3113XARBLH2_XAR.zip.html
CM9 is outdated and no longer being supported.
CM10 based ROM are available on the forum, but be careful and follow instructions in the thread exactly.
It is possible to hard brick this device permanently so be careful.
DO NOT DO A FACTORY RESET OR DATA WIPE FROM STOCK RECOVERY
DigitalMD said:
If you can still get into CWM, then i would recommend you try flashing this stock ROM .
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
Click to expand...
Click to collapse
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.
Nvm. I found an Odin download.
KingMotion said:
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.
Click to expand...
Click to collapse
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://d-h.st/WuY
DigitalMD said:
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://www.mediafire.com/download.php?v7f6vrgruqkwn58
Click to expand...
Click to collapse
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?
KingMotion said:
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?
Click to expand...
Click to collapse
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
If this doesn't fix the boot problem then ODIN flash the stock ICS from the link I provided.use odin 1.8.5
That would remove any corruption caused by the failed CM9 ROM flash, hopefully.
DigitalMD said:
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
Click to expand...
Click to collapse
I got into CWM and it's v6.0.2.3. Just waiting for the JB ROM to download so I can load it onto my SD card and then flash.
Thanks for all of your help! :good:
KingMotion said:
Thanks for all of your help! :good:
Click to expand...
Click to collapse
That CWM is fine.,
Good luck, Let us know if you have success..... or not.
CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.
KingMotion said:
CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.
Click to expand...
Click to collapse
Here's a quick tutorial on flashing odin roms.
ignore the model and rom that doesn't match yours
1. download samsung kies to get the correct driver for gt-p3113
2. download odin3 v.1.85
3. download Stock Firmware
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P3113xxxxxxx.zip until you get file P3113xxxxxxxxxxx1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P3113xxxxxxx.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot
Flashed stock ICS and.....it works!
Thanks a lot man. That's the first and last time I try to flash from RM. Gonna flash that stripped down JB ROM now though.
I now have JB 4.1.1 and am veery happy. You're a lifesaver.
KingMotion said:
I now have JB 4.1.1 and am veery happy. You're a lifesaver.
Click to expand...
Click to collapse
You are very welcome. Happy Holidays.
Hey guys, thanks for reading this question. I own a samsung galaxy tab 2 (gt-p3100) with android 4.2.1. I rooted it and tried installing cm11. After flashing the rom via odin, the device wont boot up. When i turn it on, it just shows the samsung logo 2 times in a row, and then goes back to recovery. To turn the tab off, i have to drain the battery fully because when i press the power button it boots up again. I dont know whether this is a hard brick or softbrick. I CANNOT GO TO DOWNLOAD MODE. please help me. sorry for bad english
Thank you
balarishinoob said:
Hey guys, thanks for reading this question. I own a samsung galaxy tab 2 (gt-p3100) with android 4.2.1. I rooted it and tried installing cm11. After flashing the rom via odin, the device wont boot up. When i turn it on, it just shows the samsung logo 2 times in a row, and then goes back to recovery. To turn the tab off, i have to drain the battery fully because when i press the power button it boots up again. I dont know whether this is a hard brick or softbrick. I CANNOT GO TO DOWNLOAD MODE. please help me. sorry for bad english
Thank you
Click to expand...
Click to collapse
this is softbrick, only problem with software.
Flash that ROM again,and follow the instruction.
Paget96 said:
this is softbrick, only problem with software.
Flash that ROM again,and follow the instruction.
Click to expand...
Click to collapse
Please give me the instructions
balarishinoob said:
Please give me the instructions
Click to expand...
Click to collapse
from where you download this rom??
give me a link
Paget96 said:
from where you download this rom??
give me a link
Click to expand...
Click to collapse
http://download.cyanogenmod.org/?device=p3100
Sorry I dont remember which build i downloaded
balarishinoob said:
http://download.cyanogenmod.org/?device=p3100
Sorry I dont remember which build i downloaded
Click to expand...
Click to collapse
wipe data, wipe cache, wipe dalvik cache
install zip
then repeat first step
and reboot
Paget96 said:
wipe data, wipe cache, wipe dalvik cache
install zip
then repeat first step
and reboot
Click to expand...
Click to collapse
No Luck. When I install it, it says installation aborted!
balarishinoob said:
No Luck. When I install it, it says installation aborted!
Click to expand...
Click to collapse
I think you format system...
If you format system it say Instalation aborted (status i think 6)
flash stock,and then root,and install cwm and flash cm.
I can't do that. I told that I can't get to download mode. So how can I flash ?
Problem solved. Luckily my tab had a micro SD card slot. I copied cm 10 and gapps and it works perfectly