Hey guys, thanks for reading this question. I own a samsung galaxy tab 2 (gt-p3100) with android 4.2.1. I rooted it and tried installing cm11. After flashing the rom via odin, the device wont boot up. When i turn it on, it just shows the samsung logo 2 times in a row, and then goes back to recovery. To turn the tab off, i have to drain the battery fully because when i press the power button it boots up again. I dont know whether this is a hard brick or softbrick. I CANNOT GO TO DOWNLOAD MODE. please help me. sorry for bad english
Thank you
balarishinoob said:
Hey guys, thanks for reading this question. I own a samsung galaxy tab 2 (gt-p3100) with android 4.2.1. I rooted it and tried installing cm11. After flashing the rom via odin, the device wont boot up. When i turn it on, it just shows the samsung logo 2 times in a row, and then goes back to recovery. To turn the tab off, i have to drain the battery fully because when i press the power button it boots up again. I dont know whether this is a hard brick or softbrick. I CANNOT GO TO DOWNLOAD MODE. please help me. sorry for bad english
Thank you
Click to expand...
Click to collapse
this is softbrick, only problem with software.
Flash that ROM again,and follow the instruction.
Paget96 said:
this is softbrick, only problem with software.
Flash that ROM again,and follow the instruction.
Click to expand...
Click to collapse
Please give me the instructions
balarishinoob said:
Please give me the instructions
Click to expand...
Click to collapse
from where you download this rom??
give me a link
Paget96 said:
from where you download this rom??
give me a link
Click to expand...
Click to collapse
http://download.cyanogenmod.org/?device=p3100
Sorry I dont remember which build i downloaded
balarishinoob said:
http://download.cyanogenmod.org/?device=p3100
Sorry I dont remember which build i downloaded
Click to expand...
Click to collapse
wipe data, wipe cache, wipe dalvik cache
install zip
then repeat first step
and reboot
Paget96 said:
wipe data, wipe cache, wipe dalvik cache
install zip
then repeat first step
and reboot
Click to expand...
Click to collapse
No Luck. When I install it, it says installation aborted!
balarishinoob said:
No Luck. When I install it, it says installation aborted!
Click to expand...
Click to collapse
I think you format system...
If you format system it say Instalation aborted (status i think 6)
flash stock,and then root,and install cwm and flash cm.
I can't do that. I told that I can't get to download mode. So how can I flash ?
Problem solved. Luckily my tab had a micro SD card slot. I copied cm 10 and gapps and it works perfectly
Related
I rooted my phone with SuperOneClick and that went well, when ahead and installed ROM Manager from the Market and flashed the CWM (T-Mobile version).
Then I was going to boot into recovery mode so I shut down and hit POWER + DOWN, did that, now my phone is stuck in ODIN MODE with the android logo and a message saying "Downloading...do not turn off target"
Under ODIN Mode
Product Name: SGH-I727R
Custom Binary Download: NO
Current Binary: Samsung Official
Any help?!
K so how did the phone get into dload mode and if there is no usb connected to it than just take out battery and power back ur phone again.
nutsngum said:
I rooted my phone with SuperOneClick and that went well, when ahead and installed ROM Manager from the Market and flashed the CWM (T-Mobile version).
Then I was going to boot into recovery mode so I shut down and hit POWER + DOWN, did that, now my phone is stuck in ODIN MODE with the android logo and a message saying "Downloading...do not turn off target"
Under ODIN Mode
Product Name: SGH-I727R
Custom Binary Download: NO
Current Binary: Samsung Official
Any help?!
Click to expand...
Click to collapse
Phew okay still works!
After I hit 'Flash CWM Recovery' in ROM Manager, do I need to reboot in recovery mode with ODIN? Any instructions to do so?
NO just hit flash in cwm in rom manager and let it flash in cwm and than do this to install rom.
appdroid said:
1Download rom.
2put it in sd card
3go to cwm
4clear data/factory reset 3 times
5clear cache 3 times
6wipe dalvik.
7Install Rom...
8.Reboot system now
9. Setup Your gmail (and Wifi if necessary)
10.Reboot to Clockwork
11.Install update and any other mod at this time
12.clear dalvik cache and cache partition
13. Reboot system now
14.Open Rom Manager and run Fix Permissions
15. Reboot When Complete .. and Wahlah
Ice Cream Nother Fu**ing Sandwich
Click to expand...
Click to collapse
nutsngum said:
Phew okay still works!
After I hit 'Flash CWM Recovery' in ROM Manager, do I need to reboot in recovery mode with ODIN? Any instructions to do so?
Click to expand...
Click to collapse
Do I not need to do this step first before I can install ROMs?
http://forum.xda-developers.com/showpost.php?p=21011261&postcount=5
no that will put u back stock and u will lose root.
nutsngum said:
Do I not need to do this step first before I can install ROMs?
http://forum.xda-developers.com/showpost.php?p=21011261&postcount=5
Click to expand...
Click to collapse
Ahhh got it - ok will back up then try to flash
When you say "Go to CWM" how do I do that exactly? Same with clearing the data/cache/dalvik?
Open up rom manager and select second option reboot into recovery. and there will be options in cwm about clearing data/cache and under advance you can clear dalvik.
nutsngum said:
When you say "Go to CWM" how do I do that exactly? Same with clearing the data/cache/dalvik?
Click to expand...
Click to collapse
Thanks! And when you install the add ones for the ICS, is it just the APKs that you need to put on your SD?
depends if its apk than you can install it regularly and if its .zip file you have to flash it through cwm. IT will say by file if its cwm flash able or apk. By the way you must be topped out on ur thanx rite haha cauz i don't see any.
Just wanted to know if this was ur first android. I am sure it is.
nutsngum said:
Thanks! And when you install the add ones for the ICS, is it just the APKs that you need to put on your SD?
Click to expand...
Click to collapse
appdroid said:
depends if its apk than you can install it regularly and if its .zip file you have to flash it through cwm. IT will say by file if its cwm flash able or apk. By the way you must be topped out on ur thanx rite haha cauz i don't see any.
Just wanted to know if this was ur first android. I am sure it is.
Click to expand...
Click to collapse
I have been thanking each one of your posts actually so maybe I am maxed out!
It is my first droid, came over from the Blackberry world
Oh man you have to learn a lot because there is nothing at all for blackberry that you can do. By the way I hate that ****ty keyboard they have on almost every phone. They suck in my opinion but my friend likes it idk y. I came from apple where i had jailbroken iphone and always did **** on that phone too.
nutsngum said:
I have been thanking each one of your posts actually so maybe I am maxed out!
It is my first droid, came over from the Blackberry world
Click to expand...
Click to collapse
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
here is the picture
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
ibaz said:
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
Click to expand...
Click to collapse
can any one see the picture at all??? because i cant ....
ok well now the phone is pretty much got stuck at the firmware screen as show in the picture...it got stuck like this after i install it with oldin
and when i choose install from zip my first choice is REMICS-I9003-V1.5 second is I9003XXKPE both wont install... it will just abort...after few second...
i have no idea what i have done totally new to this just dont want to paid local phone shop 50$ usd just to root it so try it my self
not sure what went wrong im a bit confuse with how to use oldin so maybe that the problem i saw there is PIT bootloader PDA phone and CSC...
not sure what to put
so at pit i uselatona 20110114.pit downloaded from XDA link
and PDA i use CM9 ALPHA8 GT I9003 PDA
that all i know...oh crap...
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
ibaz said:
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
Click to expand...
Click to collapse
i can boot into recovery mode and download mode
some other guy helped me out im able to got my phone working again i make mistake on odin file
so now my problem is how can i ICS on it... or at least with touchwiz 4 or something
all i want to do is to install REMICS-I9003-V1.5
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
ibaz said:
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
Click to expand...
Click to collapse
i went to this page but i dont know the step to install this rom.
starcraft2010 said:
i went to this page but i dont know the step to install this rom.
Click to expand...
Click to collapse
Step by step
1. Do Nandroid backup
2. Do a factory reset/data wipe (of course you can try to install the ROM over other ICS roms)
4. Install the ROM
5. Reboot (automatically)
6. Wait till full boot of your phone
Note: Do not Format Data after the installation of ROM. Just wipe cache and dalvik cache!!
Click to expand...
Click to collapse
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
i think ur internal memory may be corrupted so if u r under warrranty flash any stock rom and take it to the service centre so if really it its internal memory is corrupted they will replace the motherboard if u r under warranty.
Hetalk said:
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
Click to expand...
Click to collapse
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
starcraft2010 said:
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
Click to expand...
Click to collapse
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Hetalk said:
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Click to expand...
Click to collapse
no im not... i need more help on step 4 LIKE HOW TO INSTALL CWM firmware on normal android..stuff like that...
starcraft2010 said:
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
Click to expand...
Click to collapse
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
ganeshbiyer said:
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
Click to expand...
Click to collapse
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
starcraft2010 said:
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
Click to expand...
Click to collapse
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
ok sound great i assume if every thing is done correct i should be able to install the RemICS v1.5 then wish me luck
thanks man
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
well now i got a working normal unrooted GB 2.3.4 if i want to root it what are my step? i got ext4 format thingy and when i try to install the ICS it said abort again...
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Hetalk said:
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Click to expand...
Click to collapse
YO IM ON REMIS ics now but the problem now is it russian... and i cant read russian lol
Hi, i've tried to install hydro rom (http://forum.xda-developers.com/showthread.php?t=1750861) on my tf300tg, but when the installation is complete, the device goes into boot loop.
I've used twrp.
Can anyone help me pls?
Thanks a lot!
Jackpot369 said:
Hi, i've tried to install hydro rom (http://forum.xda-developers.com/showthread.php?t=1750861) on my tf300tg, but when the installation is complete, the device goes into boot loop.
I've used twrp.
Can anyone help me pls?
Thanks a lot!
Click to expand...
Click to collapse
wipe, install the rom, let it boot and wait for everything to stabilize, install the "a" pack -without- wiping.
but as it is now 3g wont work with version 4.4
NixZero said:
wipe, install the rom, let it boot and wait for everything to stabilize, install the "a" pack -without- wiping.
but as it is now 3g wont work with version 4.4
Click to expand...
Click to collapse
Thanks for the answer, but I tried several times to install it. The problem is that it was half an hour in boot loop
Jackpot369 said:
Thanks for the answer, but I tried several times to install it. The problem is that it was half an hour in boot loop
Click to expand...
Click to collapse
check the thread... problems with TF300TG(!) not with TF300T...
Blubberor said:
check the thread... problems with TF300TG(!) not with TF300T...
Click to expand...
Click to collapse
so I can not install the Hydro ROM on my TF300tg?
Jackpot369 said:
so I can not install the Hydro ROM on my TF300tg?
Click to expand...
Click to collapse
Anyone can help me? :crying:
Jackpot369 said:
Anyone can help me? :crying:
Click to expand...
Click to collapse
Any news? Please help me :crying:
hello
do wipe etc with CWM
try to install in first the rom for ft300t, reboot => less boot the pad (wait the login page) => then reboot in recovery mode => then install rom for ft330tg with no wipe etc
tadaaa you will boot, but you dont have the 3g activated ....
for having back the 3g, you must back to the original ROM from Asus ...
hakkukakt said:
hello
do wipe etc with CWM
try to install in first the rom for ft300t, reboot => less boot the pad (wait the login page) => then reboot in recovery mode => then install rom for ft330tg with no wipe etc
tadaaa you will boot, but you dont have the 3g activated ....
for having back the 3g, you must back to the original ROM from Asus ...
Click to expand...
Click to collapse
Thanks a lot!! But a way to make e recive call from my tf300tg using the SIM?
Jackpot369 said:
Thanks a lot!! But a way to make e recive call from my tf300tg using the SIM?
Click to expand...
Click to collapse
I already wrote that 3g wont work in my answer, you chose to ignore me, so now you wasted -months- to find that 3g dont works with hydro...
Do you still have the zip file? I can't seem to get it to flash.. just gives me a fail.
NixZero said:
I already wrote that 3g wont work in my answer, you chose to ignore me, so now you wasted -months- to find that 3g dont works with hydro...
Click to expand...
Click to collapse
Emh...no ... I asked if there is any way to make and receive calls using SIM...with OR without hydro rom...
im change my framework-res.apk , now my phone is bricked and only boot to samsung only.
im try to wipe data and wipe cache in cwm (6.0.3.6 touch)
and its not working, now i have 2 problem with cwm, im reboot my phone, now got stuck on cwm.
im rebooting and always go to cwm recovery
what should i do?
don't worry
NieeLz said:
im change my framework-res.apk , now my phone is bricked and only boot to samsung only.
im try to wipe data and wipe cache in cwm (6.0.3.6 touch)
and its not working, now i have 2 problem with cwm, im reboot my phone, now got stuck on cwm.
im rebooting and always go to cwm recovery
what should i do?
Click to expand...
Click to collapse
don't worry its a soft brick and it can be solved by flashing stock vie odin if you don't know how just quote me and i will tell you
and don't forget to press thx
the X Machine said:
don't worry its a soft brick and it can be solved by flashing stock vie odin if you don't know how just quote me and i will tell you
and don't forget to press thx
Click to expand...
Click to collapse
im want to ask, if my phone always boot to cwm ,what wrong ( Sorry bad english again )
solved
NieeLz said:
im want to ask, if my phone always boot to cwm ,what wrong ( Sorry bad english again )
Click to expand...
Click to collapse
Hi Cwm has a bug .. if u want your cwm working .. just flash cwm with odin ..
if u need to cure your galaxy core then flash stock firmware via odin .
Hit a big thanks if I have helped u
the X Machine said:
don't worry its a soft brick and it can be solved by flashing stock vie odin if you don't know how just quote me and i will tell you
and don't forget to press thx
Click to expand...
Click to collapse
vvaibhavv said:
Hi Cwm has a bug .. if u want your cwm working .. just flash cwm with odin ..
if u need to cure your galaxy core then flash stock firmware via odin .
Hit a big thanks if I have helped u
Click to expand...
Click to collapse
ok my phone now fully fixed, i will give you a thanks button 4 you
Thank You ( Terima Kasih )
NieeLz said:
ok my phone now fully fixed, i will give you a thanks button 4 you
Thank You ( Terima Kasih )
Click to expand...
Click to collapse
great im vary happy for you so what was the problem after all
the X Machine said:
great im vary happy for you so what was the problem after all
Click to expand...
Click to collapse
not have problem again, but my phone data game is missed im never backup my phone
NieeLz said:
not have problem again, but my phone data game is missed im never backup my phone
Click to expand...
Click to collapse
you can use "super backup" .apk from googleplay store. it's a great back up application. cheers ! :laugh:
galaxy core no boot not powering up long vibration.
hi i've got a new galaxy core, itried to install cwm & i did, after installing & rebooting the screen does not come up & the fone gives a long vibration (approx 5 sec) if i try to go in to recovery mode with no screen showing up, if i just power on it gives a continous vibration untill i takeoff the battery with no screen activity. plz help . URGENT ATTENTION. THANKS :-/
marpudi said:
hi i've got a new galaxy core, itried to install cwm & i did, after installing & rebooting the screen does not come up & the fone gives a long vibration (approx 5 sec) if i try to go in to recovery mode with no screen showing up, if i just power on it gives a continous vibration untill i takeoff the battery with no screen activity. plz help . URGENT ATTENTION. THANKS :-/
Click to expand...
Click to collapse
only try this tutorial at this post,
or go to SGC general and see the thread get the warranty back
stuck in recovery mode
I had flash monster rom in my galaxy core
after that..
i had wipe data and cache partition without rooting the monster rom...
i had a serious problem my phone starts only in recovery mode
saying that-
warning: no file_contexts
Please save my phone
:crying::crying:
please save my phone i am very thankful to you...
shubham.whackie said:
I had flash monster rom in my galaxy core
after that..
i had wipe data and cache partition without rooting the monster rom...
i had a serious problem my phone starts only in recovery mode
saying that-
warning: no file_contexts
Please save my phone
:crying::crying:
please save my phone i am very thankful to you...
Click to expand...
Click to collapse
Flash monsters again or do format system from advanced menu and if u still dont see the file then finally flash that exitloop.zip file......
Press thanks if I helped.......
Help
shubham.whackie said:
I had flash monster rom in my galaxy core
after that..
i had wipe data and cache partition without rooting the monster rom...
i had a serious problem my phone starts only in recovery mode
saying that-
warning: no file_contexts
Please save my phone
:crying::crying:
please save my phone i am very thankful to you...
Click to expand...
Click to collapse
Do you used PC to moving the monster rom zip? if yes then open your PC connect your device and go to the folder you have moved and remove the Rom's Zip file then Disconnect your device then reboot it then your phone should start normally
8994253 15
fahim_mistry said:
Flash monsters again or do format system from advanced menu and if u still dont see the file then finally flash that exitloop.zip file......
Press thanks if I helped.......
Click to expand...
Click to collapse
i had try flashing monster rom , result is same my phone starts only in recovery mode.
Thanks for your reply
Then flash the stock jb,
Go to recovery,
Wipe data,
Wipe cache,
Restart.
Then if you really want monsters rom. Try the whole process again. Including installation of the right recovery.
Sent from my GT-I8262 using xda app-developers app
NieeLz said:
ok my phone now fully fixed, i will give you a thanks button 4 you
Thank You ( Terima Kasih )
Click to expand...
Click to collapse
please i have same problem now. my i8262 always booting to cwm recovery mode. please help me how you solved your own
just flash exitloop.zip by cwm.....search forum fr it
Download the exitloop.zip from the thread below
http://forum.xda-developers.com/showthread.php?t=2661201
Flash the file using ur current recovery.
Before flashing any file through CWM always be sure to mount System from advanced storage menu.
After flashing this file u will boot to stock recovery...there select reboot system now.
And u r done
Sent from my GT-I8262 using xda premium
boot loop?
the X Machine said:
don't worry its a soft brick and it can be solved by flashing stock vie odin if you don't know how just quote me and i will tell you
and don't forget to press thx
Click to expand...
Click to collapse
boot loop? i think we have thesame problem. can you also help me with this?
I tried to flash the rom in samsung GT-i8262 core but since its not working
the steps once i saw in xda developers did not work what should i do ?
please please please please please please help me!
Hi there !
I flashed Nougat today with Odin. Everything went fine.
After that, I decided to install TWRP in order to root it.
I followed this guide :
http://www.naldotech.com/install-twrp-galaxy-s7-sm-g930f-touchwiz-nougat-firmware/
TWRP installed, my phone rebooted automatically.
Then, i had the "Samsung" logo for a long time, very long time. Longer than after Nougat install.
I decided to reboot.
And now, I'm stuck, the phone keep rebooting on the splash screen.
I tried to flash again the firmware with Odin, but it always fails.
When I boot on TWRP, I can't access my Internal Storage, just SD card.
I tried a wipe (dalvik / data / internal storage / cache) and i always have "Failed to mount /data" etc, so that doesn't work either.
Am i f*cked or is there a magic solution ?
Thanks !
Well, Odin worked after my 46th try.
You can lock, sorry for the inconvenience !
foyan said:
Well, Odin worked after my 46th try.
You can lock, sorry for the inconvenience !
Click to expand...
Click to collapse
which version? Did you reflashed stock rom before the success or did you just retried the TWRP?
Which TWRP version? 3.0.2-4?
I beg you, please elaborate
OK I have the same problem, and I have no idea what you did to fix it. Please help me in my misery and explain.
foyan said:
Well, Odin worked after my 46th try.
You can lock, sorry for the inconvenience !
Click to expand...
Click to collapse
lpmlpm said:
OK I have the same problem, and I have no idea what you did to fix it. Please help me in my misery and explain.
Click to expand...
Click to collapse
Look at https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/post70618589
I had the same issue and went the same way.