Hi, i've tried to install hydro rom (http://forum.xda-developers.com/showthread.php?t=1750861) on my tf300tg, but when the installation is complete, the device goes into boot loop.
I've used twrp.
Can anyone help me pls?
Thanks a lot!
Jackpot369 said:
Hi, i've tried to install hydro rom (http://forum.xda-developers.com/showthread.php?t=1750861) on my tf300tg, but when the installation is complete, the device goes into boot loop.
I've used twrp.
Can anyone help me pls?
Thanks a lot!
Click to expand...
Click to collapse
wipe, install the rom, let it boot and wait for everything to stabilize, install the "a" pack -without- wiping.
but as it is now 3g wont work with version 4.4
NixZero said:
wipe, install the rom, let it boot and wait for everything to stabilize, install the "a" pack -without- wiping.
but as it is now 3g wont work with version 4.4
Click to expand...
Click to collapse
Thanks for the answer, but I tried several times to install it. The problem is that it was half an hour in boot loop
Jackpot369 said:
Thanks for the answer, but I tried several times to install it. The problem is that it was half an hour in boot loop
Click to expand...
Click to collapse
check the thread... problems with TF300TG(!) not with TF300T...
Blubberor said:
check the thread... problems with TF300TG(!) not with TF300T...
Click to expand...
Click to collapse
so I can not install the Hydro ROM on my TF300tg?
Jackpot369 said:
so I can not install the Hydro ROM on my TF300tg?
Click to expand...
Click to collapse
Anyone can help me? :crying:
Jackpot369 said:
Anyone can help me? :crying:
Click to expand...
Click to collapse
Any news? Please help me :crying:
hello
do wipe etc with CWM
try to install in first the rom for ft300t, reboot => less boot the pad (wait the login page) => then reboot in recovery mode => then install rom for ft330tg with no wipe etc
tadaaa you will boot, but you dont have the 3g activated ....
for having back the 3g, you must back to the original ROM from Asus ...
hakkukakt said:
hello
do wipe etc with CWM
try to install in first the rom for ft300t, reboot => less boot the pad (wait the login page) => then reboot in recovery mode => then install rom for ft330tg with no wipe etc
tadaaa you will boot, but you dont have the 3g activated ....
for having back the 3g, you must back to the original ROM from Asus ...
Click to expand...
Click to collapse
Thanks a lot!! But a way to make e recive call from my tf300tg using the SIM?
Jackpot369 said:
Thanks a lot!! But a way to make e recive call from my tf300tg using the SIM?
Click to expand...
Click to collapse
I already wrote that 3g wont work in my answer, you chose to ignore me, so now you wasted -months- to find that 3g dont works with hydro...
Do you still have the zip file? I can't seem to get it to flash.. just gives me a fail.
NixZero said:
I already wrote that 3g wont work in my answer, you chose to ignore me, so now you wasted -months- to find that 3g dont works with hydro...
Click to expand...
Click to collapse
Emh...no ... I asked if there is any way to make and receive calls using SIM...with OR without hydro rom...
Related
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
sawclOne said:
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Is your phone Rooted?
Jrcon said:
Is your phone Rooted?
Click to expand...
Click to collapse
Yes my phone is rooted
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
....
Jrcon said:
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
Click to expand...
Click to collapse
Yes thank you but when i install that my phone will work right?
sawclOne said:
Yes thank you but when i install that my phone will work right?
Click to expand...
Click to collapse
Let me guess: no backup or anything?
if you have back up try restoring it from recovery...if you dont then reinstall the rom again from recovery.(wipe cashe data..system) should work just fine...at least is what i did in my nexus s..when i did this mistake..
Are your recovery and rom stock or custom? Cyanogenmod, CWM recovery etc...
If I were you, I would install CWM recovery for your phone and then install some custom rom, they are just awesome
Thx
Thank you all!!!
same problem
i have the same problem my phone just gets stuck with the google screen, but I already had cwm recovery installed but when I try to install cm9 or even cm7 its says that it cant open the package and the installation gets aborted. should Itry using the wug toolkit to flash the zips. and am i supposed to install sabra root toolkit on my phone...??? thanks.
Hello guys,
Need help!
Flashed my Xperia J with CM10, FXP212.
Problem: I don't get network service.
Bluetooth and WiFi seem to work fine.
Thanks for any help
Edit: (If this helps in anyway) I dont see the FreeXP logo on startup, instead I get a green colored battery logo with the LED glowing red and then the CyanogenMod logo.
Edit 2:
I tried restoring the stock ROM from my backup.
The CWM recovery screen says restore complete. So I say" reboot now". It vibrates and then there is nothing on the screen except for the LED glowing red.
So I remove & re-insert the battery. Switch it on, but I can only enter recovery on purple LED glow. It always enters recovery.
So all I am able to do now is enter recovery and nowhere from there
What am I doing wrong?? Help guys!
Try to fastboot the kernel from the previous release.
your device the network locked
same problm with me :screwy:
---------------------------------
Sent from my GT-S5570L using Tapatalk 2
gavster26 said:
Try to fastboot the kernel from the previous release.
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
I tried the boot.img kernel from FXP211 but no help.
saitri said:
your device the network locked
same problm with me :screwy:
---------------------------------
Sent from my GT-S5570L using Tapatalk 2
Click to expand...
Click to collapse
Hi saitri,
Thanks for the reply.
There was no network lock on the stock ROM.
Maybe I miss something here. What exactly is network lock?
JL.93 said:
Maybe I have the solution! Try this:
1) Flash stock rom ICS
2) Flash CM10's kernel with Flashtool
3) Various wipe
4) Flash CM10 with CWM
Fixed?
--- I'm sorry for my English, I translate with Google translator ---
Click to expand...
Click to collapse
Thanks for the reply.
I tried doing that earlier but landed into a bigger problem.
I can't boot in. It always enters recovery. Tried restoring the stock ROM from my backup but didnt work, It doesnt boot. So I press the 'Vol Up' key and it enters recovery.
What might have gone wrong here??
Myuvin said:
Hi saitri,
Thanks for the reply.
There was no network lock on the stock ROM.
Maybe I miss something here. What exactly is network lock?
Click to expand...
Click to collapse
I also do not understand, after I install cm10 210 and there was such a
saitri said:
I also do not understand, after I install cm10 210 and there was such a
Click to expand...
Click to collapse
Hi saitri,
U can flash a stock ROM, either ICS or JB using flashtool. Your phone will be unrooted. Bootloader remains unlocked.
You can then root it and install any other custom ROM. Though I havent installed a custom ROM yet after flashing the stock ROM.
Will let you know when I do it. Meanwhile you can flash a stock ROM. Let me knw if u need any assistance.
All those who replied: Thanks for your support and time.
Hi,today I received a message telling me update saying that the update 4.4.4 update was available.So I download and I install. The phone turns off, turn back on CWM(ClockworkMod),it marks me ''Intall untrusted Package ?''so I made ''Yes , Install untrusted zip".After he told me "Root access possibly lost.Fix?" So I did "Yes , fix root (/system/xbin/su).Then the phone restarts when I get on the menu welcomes 30 sec after it starts,he reboot and it started on the CWM and rest the same question as above and it started on the CWM and rest the same question as above ( ''Intall untrusted Package ?'')i do and again for 20 min. I decided to stop the phone and reset my phone because its breaking my head.
Is what aurrait a kind soul to help me?
thank you
PS:I have root my moto g before the updates and when I unroot (I unroot with SuperSu) I always those problem
Sorry for my bad english :angel:
You're lucky that you got update. That's odd error.
What's your location? None else has received update yet. Try factory resetting or flash stock ROM.
VAMGDroidFan said:
You're lucky that you got update. That's odd error.
What's your location? None else has received update yet. Try factory resetting or flash stock ROM.
Click to expand...
Click to collapse
My location is in France, I did 2 reset (power +vol down) and i have the same problem.What is flash stock ROM and how do you are ?
newman71200 said:
My location is in France, I did 2 reset (power +vol down) and i have the same problem.What is flash stock ROM and how do you are ?
Click to expand...
Click to collapse
That's nice. Read this link.
VAMGDroidFan said:
That's nice. Read this link.
Click to expand...
Click to collapse
But if I install the stock rom, CWM will you it replaced by stock recovery? (because I think the problem comes from CWM for update)
newman71200 said:
But if I install the stock rom, CWM will you it replaced by stock recovery? (because I think the problem comes from CWM for update)
Click to expand...
Click to collapse
yeah, cwm will be replaced with stock recovery as you are restoring stock firmware
bublz654 said:
yeah, cwm will be replaced with stock recovery as you are restoring stock firmware
Click to expand...
Click to collapse
Can I installs the recovery only via fastboot ?
Yes you can flash CWM via fastboot, but you need to do steps again to be able to flash it.
VAMGDroidFan said:
Yes you can flash CWM via fastboot, but you need to do steps again to be able to flash it.
Click to expand...
Click to collapse
How?
Please read FAQ.
VAMGDroidFan said:
Please read FAQ.
Click to expand...
Click to collapse
I managed to install the stock rom and install the update (4.4.4)
thank you very much
Hey guys, thanks for reading this question. I own a samsung galaxy tab 2 (gt-p3100) with android 4.2.1. I rooted it and tried installing cm11. After flashing the rom via odin, the device wont boot up. When i turn it on, it just shows the samsung logo 2 times in a row, and then goes back to recovery. To turn the tab off, i have to drain the battery fully because when i press the power button it boots up again. I dont know whether this is a hard brick or softbrick. I CANNOT GO TO DOWNLOAD MODE. please help me. sorry for bad english
Thank you
balarishinoob said:
Hey guys, thanks for reading this question. I own a samsung galaxy tab 2 (gt-p3100) with android 4.2.1. I rooted it and tried installing cm11. After flashing the rom via odin, the device wont boot up. When i turn it on, it just shows the samsung logo 2 times in a row, and then goes back to recovery. To turn the tab off, i have to drain the battery fully because when i press the power button it boots up again. I dont know whether this is a hard brick or softbrick. I CANNOT GO TO DOWNLOAD MODE. please help me. sorry for bad english
Thank you
Click to expand...
Click to collapse
this is softbrick, only problem with software.
Flash that ROM again,and follow the instruction.
Paget96 said:
this is softbrick, only problem with software.
Flash that ROM again,and follow the instruction.
Click to expand...
Click to collapse
Please give me the instructions
balarishinoob said:
Please give me the instructions
Click to expand...
Click to collapse
from where you download this rom??
give me a link
Paget96 said:
from where you download this rom??
give me a link
Click to expand...
Click to collapse
http://download.cyanogenmod.org/?device=p3100
Sorry I dont remember which build i downloaded
balarishinoob said:
http://download.cyanogenmod.org/?device=p3100
Sorry I dont remember which build i downloaded
Click to expand...
Click to collapse
wipe data, wipe cache, wipe dalvik cache
install zip
then repeat first step
and reboot
Paget96 said:
wipe data, wipe cache, wipe dalvik cache
install zip
then repeat first step
and reboot
Click to expand...
Click to collapse
No Luck. When I install it, it says installation aborted!
balarishinoob said:
No Luck. When I install it, it says installation aborted!
Click to expand...
Click to collapse
I think you format system...
If you format system it say Instalation aborted (status i think 6)
flash stock,and then root,and install cwm and flash cm.
I can't do that. I told that I can't get to download mode. So how can I flash ?
Problem solved. Luckily my tab had a micro SD card slot. I copied cm 10 and gapps and it works perfectly
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Ctrterrell said:
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Click to expand...
Click to collapse
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Metabolic12 said:
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Click to expand...
Click to collapse
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Ctrterrell said:
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Click to expand...
Click to collapse
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/H and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Metabolic12 said:
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/G and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Click to expand...
Click to collapse
OK thanks for your help ima try it now and see what happens and let you know
Ctrterrell said:
OK thanks for your help ima try it now and see what happens and let you know
Click to expand...
Click to collapse
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Metabolic12 said:
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Click to expand...
Click to collapse
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Ctrterrell said:
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Click to expand...
Click to collapse
Give me your step by step and I'll see if I can help you.
Well I wipe the data system and cache before I installed the rom then afterwards I installed it then I flashed the kernel and it said something bout permission was removed since it couldn't be installed but I will take a pic from my tablet real fast to show you what I was talking about
Metabolic12 said:
Give me your step by step and I'll see if I can help you.
Click to expand...
Click to collapse
This
I forgot to use Odin lol mybad
Ctrterrell said:
This
Click to expand...
Click to collapse
Try this. Take your external SD card and put it in your tablet. Go to Messi's thread for the max kernel in J7T development and download the boot.img not the boot.tar.md5. Finish the download then extract the zip in your external SD card. Put your SD card in your phone, boot into TWRP. Now mount system, cache, art/dalvik, data and internal storage (you may need to format data to access data) now wipe them. Don't wipe your external SD card, so make sure it's not mounted in TWRP. After the wipe mount your external SD, flash the rom, then flash boot.img and tick Boot not recovery before the flash. Reboot and wait. Let me know if it helped man.
---------- Post added at 08:39 PM ---------- Previous post was at 08:19 PM ----------
Ctrterrell said:
I forgot to use Odin lol mybad
Click to expand...
Click to collapse
If you download the boot.img you won't need Odin. But I prefer flashing tars personally, your choice. It should boot for you bro.
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Ctrterrell said:
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Click to expand...
Click to collapse
Glad you got it bro and no the Wi-Fi doesn't work on any of the 3 versions.
Yeah thanks for everu8amd what else roms have you tried and will I have to always flash that kernel when I try to install a roms on this phone or was that only for the note roms
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
And Reboot I reboot to recovery and advance wipe click dalvic and cliche
mario1634 said:
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
Click to expand...
Click to collapse
Ok ima give it a try In few and see what happens
Have anybody figure out a fix for the camera
mario1634 said:
Have anybody figure out a fix for the camera
Click to expand...
Click to collapse
That's what I was about to ask next I know I was still having problems even when I tried to send a pic it still Would reboot
I'm trying to figure it out now if I get it working I will tell you I get it to stop reboot ever time and now it just force close