It is not my work!!!
Most of them are made by bbs.mfunz.com , if it is not ethical , tell me and I will delete it. It you need another kernel , tell me and post the sbf file here , I will make it
China kernels : ( may break flash light , use with caution!! )
China 212 : http://www.mediafire.com/download.php?ux8jab7f98dub18
China 260 : http://www.mediafire.com/download.php?7xr7iu9qb44yr2a
China 211 usb fixed : http://www.mediafire.com/download.php?b5akja3pkab7k1p
China 1.11 : http://www.mediafire.com/download.php?qdkyw1a3i1a895b
Others :
3.4.3-36-1.7 : http://www.mediafire.com/download.php?snyxru3rj0b0dfv
3.4.3-33 : http://www.mediafire.com/download.php?b56a54vvq33vl6n
3.4.3-179-002 : http://www.mediafire.com/download.php?nyn5cgrqtrg5iqv
3.4.3-177 : http://www.mediafire.com/download.php?rk5e7kcazklm3dd
ps. Flash it via CWM , FULL WIPE or WIPE CACHE is recommand.
Consider putting up gb kernels too...
Sent from my MB526 using xda premium
nogoodusername said:
Consider putting up gb kernels too...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I don't know if the new kernels work on old bootloader, I can't test it because it is my only phone. You can post the sbf file here and I will try to make it.
are these from my post on mfunz?
if it is, the zip froyo kernel is not complete. i only put boot.img into the zip without devtree, which means you can only flash between froyo kernels.
if you flash these zips from gb kernel, you won't be able to boot. please flash some fixed.sbf and you can boot again.
dlhxr said:
are these from my post on mfunz?
if it is, the zip froyo kernel is not complete. i only put boot.img into the zip without devtree, which means you can only flash between froyo kernels.
if you flash these zips from gb kernel, you won't be able to boot. please flash some fixed.sbf and you can boot again.
Click to expand...
Click to collapse
I don't know if it was done by you if yes, could you mind I post it here?? thanks for information.
Hi! i've searched informations about kernels but I still don't understand what are the differences between different kernels...will them improve battery healt or change performances or something else? i'm running stock froyo with stock kernel (2.3.32.9- .......), I need to change/upgrade it?
thanks!
kevin_diu said:
I don't know if it was done by you if yes, could you mind I post it here?? thanks for information.
Click to expand...
Click to collapse
of course you can put it here, but with some warnings just as i said.
http://bbs.mfunz.com/thread-157915-1-1.html
are these from the link above?
Hi! i've searched informations about kernels but I still don't understand what are the differences between different kernels...will them improve battery healt or change performances or something else? i'm running stock froyo with stock kernel (2.3.32.9- .......), I need to change/upgrade it?
thanks!
dlhxr said:
of course you can put it here, but with some warnings just as i said.
http://bbs.mfunz.com/thread-157915-1-1.html
are these from the link above?
Click to expand...
Click to collapse
Yes, maybe some of them are copy from your post. And all of those script are copy from your post. I am very sorry about that and hope you don't mind.
FraRiva91 said:
Hi! i've searched informations about kernels but I still don't understand what are the differences between different kernels...will them improve battery healt or change performances or something else? i'm running stock froyo with stock kernel (2.3.32.9- .......), I need to change/upgrade it?
thanks!
Click to expand...
Click to collapse
Different Defy have different hardware and if you flash a appropriate kernel, it improve battery health, but i don't know it can improve performances or something. If you are running stock froyo and kernel, I suggest u don't touch it.
Related
which current roms are ok to use with the new 4g phone? i think it would be nice to know. also is there a stock rooted 2.3.4 i can use when i get my phone this week? i see there is already a kernel we can use which is awesome.
fixxxer2008 said:
which current roms are ok to use with the new 4g phone? i think it would be nice to know. also is there a stock rooted 2.3.4 i can use when i get my phone this week? i see there is already a kernel we can use which is awesome.
Click to expand...
Click to collapse
I may be wrong but I don't believe any ROMs work with our phone yet. What I did in the mean time was just root using the fastboot method and flash CWM. Works like a champ
that's funny because netarch said last week they would work.
2.3.4 stock rom please devs!
The kernel works (I have it on my phone) as netarch stated, but rom's I *BELIEVE* are not compatible
fixxxer2008 said:
that's funny because netarch said last week they would work.
2.3.4 stock rom please devs!
Click to expand...
Click to collapse
I said the kernels should work fine, and roms possibly.
On closer inspection of a system dump from an ns4g there are some differences that will prevent current custom roms from working properly.
I'd need a guinea pig with an ns4g to assist me in testing to find out the exact changes necessary to make them compatible.
Atm there are at least 2 files I've found that would need to change.
You can go ahead and flash Net's kernel and start overclocking though!
I ended up getting so used to stock 2.3.4 rom that I am still on it!
Sent from my Nexus S using XDA App
netarchy said:
I said the kernels should work fine, and roms possibly.
On closer inspection of a system dump from an ns4g there are some differences that will prevent current custom roms from working properly.
I'd need a guinea pig with an ns4g to assist me in testing to find out the exact changes necessary to make them compatible.
Atm there are at least 2 files I've found that would need to change.
Click to expand...
Click to collapse
Guinea Pig here...
netarchy said:
I said the kernels should work fine, and roms possibly.
On closer inspection of a system dump from an ns4g there are some differences that will prevent current custom roms from working properly.
I'd need a guinea pig with an ns4g to assist me in testing to find out the exact changes necessary to make them compatible.
Atm there are at least 2 files I've found that would need to change.
Click to expand...
Click to collapse
Count me in as well as a guinea pig.
hey netarchy just to hopefully speed things up, yall can join the nexus IRC room
ill be making a new thread regarding its details. i know ill be there waiting to test anything out
I put a stock deodexed rom together. If anyone is interested, let me know. It has net's kernel and a few apps kanged from cm, file manager, spare parts, nothing major. Im testing now and and will share...If anyone wants
mikeyinid said:
I put a stock deodexed rom together. If anyone is interested, let me know. It has net's kernel and a few apps kanged from cm, file manager, spare parts, nothing major. Im testing now and and will share...If anyone wants
Click to expand...
Click to collapse
I'd be grateful!
dalvarez7 said:
I'd be grateful!
Click to expand...
Click to collapse
I think its good, Ill upload now
looking for that link....!!!!
Deodexing tool?
mikeyinid said:
I think its good, Ill upload now
Click to expand...
Click to collapse
Which tool did you use to deodex the rom? I was using xUltimate.
dalvarez7 said:
Which tool did you use to deodex the rom? I was using xUltimate.
Click to expand...
Click to collapse
Thats what I used. The rom is ready, but you will have to still flash superuser in recovery. I dont think the script is right. Im not really a dev after all Just wanted this, so I made it happen...
*I dont think my net could be any slower...still uploading
mikeyinid said:
Thats what I used. The rom is ready, but you will have to still flash superuser in recovery. I dont think the script is right. Im not really a dev after all Just wanted this, so I made it happen...
*I dont think my net could be any slower...still uploading
Click to expand...
Click to collapse
Did you have any trouble deodexing any of the apks? Mine keeps failing on NetworkLocation.odex. I just pulled the apk and odex files out of the origi_app folder to get around it.
Ok, so this is a stock deodexed ROM for the NS 4G. I am not a dev, you flash this at your own risk. With that being said, Im running it and I havent found anything wrong...yet. It does have netarchy's bfs kernel, you will need setcpu to oc, it is good up to 1.4. Your phone may not be. Do not check set on boot in setcpu until you know your phone is stable. You WILL have to flash superuser in recovery, you can flash it right after you flash the ROM, no need to reboot. So, here it is...
O yea, I added spare parts, CM file manager, and CM mms.apk so it doesnt have to be white...
>>>>>>I recommend wiping data before flashing<<<<<<
ROM:
http://www.mediafire.com/?xz680krzo40a7z7
THEN FLASH THIS BEFORE YOU REBOOT OR YOU WILL NOT HAVE ROOT ACCESS
SU:
http://www.mediafire.com/download.php?7mv65eu6ki4fcbd
>>>>>>I recommend wiping data before flashing<<<<<<
dalvarez7 said:
Did you have any trouble deodexing any of the apks? Mine keeps failing on NetworkLocation.odex. I just pulled the apk and odex files out of the origi_app folder to get around it.
Click to expand...
Click to collapse
I had the same problem, I worked around it.
I posted the ROM in the dev section, If you have any bugs or feedback, post it here http://forum.xda-developers.com/showthread.php?t=1070383
Thanks guys...
mikeyinid said:
I had the same problem, I worked around it.
Click to expand...
Click to collapse
i had no problem deodexing using the htc/sgs kitchen. just and fyi. it did everything with no errors.
Hey everyone,
I am planning to develop Custom ROM's as follows:
Stock
Stock Ultimate
Clean
Clean Ultimate
Ultra Clean
Ultra Clean Ultimate
Battery Saver
The features of each ROM version will be decided and then the ROM will be finalized and uploaded.
I am also planning to develop each of the above version for different BASE ROM's like
JPM
JPN
XWJPF
DDJP2
The reason to develop the following ROM's is not to provide final CUSTOM ROM's but Basic Custom ROM's which the users can then customize as per their requirements...
SO PLEASE LET ME KNOW IF YOU WANT ME TO WORK ON THIS COLLECTION...
NOTE: If there is not much response then I will work on something else other than this...
dharammaniar said:
Hey everyone,
I am planning to develop Custom ROM's as follows:
Stock
Stock Ultimate
Clean
Clean Ultimate
Ultra Clean
Ultra Clean Ultimate
Battery Saver
The features of each ROM version will be decided and then the ROM will be finalized and uploaded.
I am also planning to develop each of the above version for different BASE ROM's like
JPM
JPN
XWJPF
DDJP2
The reason to develop the following ROM's is not to provide final CUSTOM ROM's but Basic Custom ROM's which the users can then customize as per their requirements...
SO PLEASE LET ME KNOW IF YOU WANT ME TO WORK ON THIS COLLECTION...
NOTE: If there is not much response then I will work on something else other than this...
Click to expand...
Click to collapse
Your already working on a kitchen which is almost same as you said above, right?
Sent from my GT-I5800 using Tapatalk
rudolf895 said:
Your already working on a kitchen which is almost same as you said above, right?
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Kitchen is different i think...this will be ready to flash .tar files...
This is just to reduce user's initial work...
And as i said...if i dont get a good response i wont do this...
I work on things what everyone want...
Personnaly I think it should not be done,
we have various Froyo-based roms already and there already is a thread with stock firmwares one can use to modify.
Not that I think your initiative is a bad idea, but in my opinion a little overkill
A better initiative is to create rom-files we can flash using CWM.
dharammaniar said:
Kitchen is different i think...this will be ready to flash .tar files...
This is just to reduce user's initial work...
And as i said...if i dont get a good response i wont do this...
I work on things what everyone want...
Click to expand...
Click to collapse
Oh ok
I'd vote to continue kitchen...
Just my vote..
Sent from my GT-I5800 using Tapatalk
_Arjen_ said:
Personnaly I think it should not be done,
we have various Froyo-based roms already and there already is a thread with stock firmwares one can use to modify.
Not that I think your initiative is a bad idea, but in my opinion a little overkill
A better initiative is to create rom-files we can flash using CWM.
Click to expand...
Click to collapse
Yeah...CWM is also one of the options i can look into...waiting for mumbozver to release installer for it so then i can use it with different Base ROM's
rudolf895 said:
Oh ok
I'd vote to continue kitchen...
Just my vote..
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Appreciate your opinion
Kitchen work will always be going on...Anything new comes up, i'll add it to the kitchen...
dharammaniar said:
Yeah...CWM is also one of the options i can look into...waiting for mumbozver to release installer for it so then i can use it with different Base ROM's
Click to expand...
Click to collapse
It should be possible to flash it as update.zip with stock samsung recovery.
It's also possible to do it that way on LG P500.
Will see if I can test it on my wifes phone, will have to flash stock rom first
_Arjen_ said:
It should be possible to flash it as update.zip with stock samsung recovery.
It's also possible to do it that way on LG P500.
Will see if I can test it on my wifes phone, will have to flash stock rom first
Click to expand...
Click to collapse
Update.zip is not working on stock samsung recovery...that is why u require this...i've talked to mumbozver..he is gonna release an installer for the recovery soon enuf...
Aha,
Well, we have to wait then
Good idea! I'm not that lazy to skip some minor work, but I have problem with XWJPF deodexing process. Using kitchen, it freezes when removing some files, so I have to reflash.
So if you can upload a ready-to-flash deodexed stock XWJPF I would really appreciate it!
And, I believe, many other users.
LarryMetal said:
Good idea! I'm not that lazy to skip some minor work, but I have problem with XWJPF deodexing process. Using kitchen, it freezes when removing some files, so I have to reflash.
So if you can upload a ready-to-flash deodexed stock XWJPF I would really appreciate it!
And, I believe, many other users.
Click to expand...
Click to collapse
Ok...i'll do that tomorrow..
Sent from my GT-I5800 using XDA App
I also have the same problem when deodexing stock xwjpf it freezes and getting a soft brick. please provide us a deodexed stock xwjpf
thanks in advance
nsdj said:
I also have the same problem when deodexing stock xwjpf it freezes and getting a soft brick. please provide us a deodexed stock xwjpf
thanks in advance
Click to expand...
Click to collapse
k...next thing i'll work on is a deodexed stock xwjpf
Hello everybody!
My name is James and i am from Singapore, first time posting here on the forums. I have done my due searching for solutions to my query but alas need some direct answers from my sempais over here at XDA.
I have rooted my DS by following this thread: http://forum.xda-developers.com/showthread.php?t=1497604 and got my enlightenment from the splendid mini-guide posted by user "foX2delta"
Now I am on CyanogenMod RC 7.2 and lovin' every moment spent with it. But i have an urging to flash the tiamat kernel over to see if I can get anymore battery life and performance out of the setup. But the problem is this: I have unlocked via HTCdev and rooted via SU. I do not know where to find the Boot.img required for me to flash tiamat onto my DS. Please advise!
Many Thanks,
James.
Edit: Installed Reaper kernel v.1.3 with boot.img included in the zip folder. Thanks rd74!
Don't use Tiamat 1.1.5 kernel with CM7.2 - it's outdated and no longer supported. It won't work as you expect. Try Reaper kernel v.1.3 from this post: http://forum.xda-developers.com/showthread.php?t=1322000
You can flash it through CWM or Ext4 Recovery.
What do you mean by "it's outdated and no longer supported"? Nevertheless, I want to have a try. How did you flash this kernel on previous CM ROM? I can't find the boot.img file as well. Please at least tell me something about that.
I posted the instructions to get the boot.img from Tiamat kernel some time ago. Please look it up, most likely in Q&A.
Haomuch said:
What do you mean by "it's outdated and no longer supported"? Nevertheless, I want to have a try. How did you flash this kernel on previous CM ROM? I can't find the boot.img file as well. Please at least tell me something about that.
Click to expand...
Click to collapse
Recovery has to be flashed first.
then flash the tiamat kernel without wiping.
then enjoy your OverClock Kernel. Smoothy & Faster.
Jack_R1 said:
I posted the instructions to get the boot.img from Tiamat kernel some time ago. Please look it up, most likely in Q&A.
Click to expand...
Click to collapse
Thanks guy I have found that instruction.
http://forum.xda-developers.com/showthread.php?t=1577623
included
Haomuch said:
Thanks guy I have found that instruction.
http://forum.xda-developers.com/showthread.php?t=1577623
Click to expand...
Click to collapse
Great! Thanks for putting a link.
With a little of trial and error you can now flash any modem whether it be FC09 or FC19 or any other modem without odin! How you ask?!?!?! with a little renaming and rezipping youll be on a ns4g modem or a epic 4g modem without ODIN!!! And noone likes ODIN lol
All you have to do is flash the modified kernel then reboot recovery into the new recovery and then my zip either the FC19 or FC09 modem in cwm with the rom its meant for then either flash your kernel again say your on cm7 flash the modified kernel flash the modem then reflash your kernel like shadow or nyan same thing for cm9 or cm10 just make sure you have another kernel to flash so it will boot this is the only way i have figured out OR you could flash this Kernel then install the modem then after you install just reflash your rom and gapps for a fresh install. if your on cm9 you can keep the kernel installed but if your not after you get done installing the modem install the correct kernel for your rom
For Epic 4G modem!
BEFORE FLASHING MAKE SURE YOU HAVE ANOTHER KERNEL TO FLASH AFTERWARD OR YOU WONT HAVE THE EPIC MODEM! NEXUS MODEM IS ALL GOOD
These Kernels should allow changing modems if your on them.
Modified CM9 Kernel:https://dl.dropbox.com/u/60122779/Modem%20install%20kernel.zip
Modified CM7 Kernel:http://eigerzoom.com/darkjje/xbkernel-0812.zip
Modified CM10 Kernel:http://darkierawr.com/Android/Users/xboxfanj/nexusmodempatch-CM10-0808_mms.zip
FC09:https://dl.dropbox.com/u/60122779/FC09-Modem-CWM.zip
MD5:a20cd46e61909dd90919c153458e96f7
FC19:https://dl.dropbox.com/u/60122779/FC19-Modem-CWM.zip
MD5:8acd10876c767825d06d86f2a56a3b6c
DK28:https://dl.dropbox.com/u/60122779/DK28-Modem-CWM.zip
MD5:a20cd46e61909dd90919c153458e96f7
EB13:https://dl.dropbox.com/u/60122779/EB13-Modem-CWM.zip
MD5:f01e6785cd0acb381d5613d8150d4584
EC05:https://dl.dropbox.com/u/60122779/EC05-Modem-CWM.zip
MD5:429ba29d063372309affb4171285f9b6
EE03:https://dl.dropbox.com/u/60122779/EE03-Modem-CWM.zip
MD5:9552b354966b86099d02d643f02e3cf6
EH05:https://dl.dropbox.com/u/60122779/EH05-Modem-CWM.zip
MD5:63bf06b50fb3cc0b3e4e71dbb346bef8
EL30:https://dl.dropbox.com/u/60122779/EL30-Modem-CWM.zip
MD5:ec6afd25409bd1aba0242cd2c54031d0
For NS4G modem!
To be on a ns4g modem go to xboxfanj's thread http://forum.xda-developers.com/showthread.php?t=1842037
NOTE:Make sure your not on NS4G patched rom or your baseband will be unknown until you go to the appropriate rom for the modem.
HOW TO:
1.Install any of these kernels above.(doesnt matter which one because it will only be used to flash the modem)
2.Go to advanced in cwm
3.Go to reboot recovery.
4.Now that your in the new recovery flash any of the above modems.
5.Then after you flash the desired modem flash any rom and it will replace the kernel with the one from that rom.
6.flash your gapps then all should be fine.
http://www.youtube.com/watch?v=jWM8mA_4cgc
Thanks to: The CM team for Everything! and xboxfanj,marcusant,didhiy and anyone else im forgetting!!!
you mind posting the md5 or sha1s when you got a min?
Awesome job, joemossjr.
Sure will post some md5's for ya
so I'm just on normal CM7, but flashing either FC09 or FC19 doesn't seemt do anything. I'm still on EL30. md5s match. Am I missing something here?
imma try to find your problems
ok i odined the el30 modem gonna flash the Fc09 one real quick hold on
I will see if mine works.
Sent from my GT-P7510 using Tapatalk 2
The NS4G modem that was posted in this thread when I first found it works, at least if you're already on the NS4Gmod CM7
Now the question is, which NS4G modem will give an Epic the best signal and data speed... has anyone compared a few yet?
Sent from my SPH-D700 using xda app-developers app
Its is now fixed just read all the instructions and fallow all directions turns out there is a certian file that is modified in the kernel that allows the writing of modems without odin that i needed so just flash the kernel then install the modem then reflash your kernel
styles420 said:
The NS4G modem that was posted in this thread when I first found it works, at least if you're already on the NS4Gmod CM7
Now the question is, which NS4G modem will give an Epic the best signal and data speed... has anyone compared a few yet?
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
I have tried all of the nexus modems and kl2 is by far the best for me. Got 2.25 down and 1.3 up on 3g!
Sent from my SPH-D700 using xda premium
i agree that one seems to be the best
Is this worth bugging the CM team to get them to add this option to the stock kernel?
dzl said:
you mind posting the md5 or sha1s when you got a min?
Click to expand...
Click to collapse
dzl said:
Is this worth bugging the CM team to get them to add this option to the stock kernel?
Click to expand...
Click to collapse
it would really help things progress so we wouldn't have to change kernels every time we want to change a modem but its way better then fooling with Odin and having it fail half way then restart lol
WOW! Another case of "they said it couldn't be done!"
Nice work Joe!
Sent from my PantechP4100 using xda premium
Thanks man!
Okey doke, for one I tip my hat to you good sir.
Now, just so I've an idea of how you went about this.The kernel(zImage) is left untouched and this is more based upon the init's correct? The Recovery init to be more exact? Or am I off-base and there are patches to the kernel?
AproSamurai said:
Okey doke, for one I tip my hat to you good sir.
Now, just so I've an idea of how you went about this.The kernel(zImage) is left untouched and this is more based upon the init's correct? The Recovery init to be more exact? Or am I off-base and there are patches to the kernel?
Click to expand...
Click to collapse
I think no kernel related too.. first though just the updater script on ns4g modem that make it happen
will take a look further over the file
AproSamurai said:
Okey doke, for one I tip my hat to you good sir.
Now, just so I've an idea of how you went about this.The kernel(zImage) is left untouched and this is more based upon the init's correct? The Recovery init to be more exact? Or am I off-base and there are patches to the kernel?
Click to expand...
Click to collapse
I didnt do the kernel people like xboxfanj and marcusant and UBER and other i may be forgeting made the kernel so its not really mine its actually a modified shadow kernel that for some reason allowed the modem area to be written to and if you werent on the kernel it would say it successfully flashed the modem but it really didnt so i experimented and waaalaaaaah things were starting to peice together and i put the puzzle peices together and now we no longer need odin! i dont know what in the kernel allowed it but as soon as we figure out it will most like be in some other kernels and it would make the process easier and more user friendly:highfive:
has anyone contacted qbking77 to make a how-to-video on this ? ... :fingers-crossed: ( preferrably the REAL qbking77 NOT the blackqbking that has been mentioned in other sections / threads ... LOL )
EDIT - I sent him a PM :fingers-crossed:
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
I think guide allready have on the jbx kernel thread
guruggk1988 said:
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Click to expand...
Click to collapse
i think you have already installed BMM.
then take mokee 4.4.2 for example,
1. download the latest version of dtrail's kernal, or Shurikkb's (because it is verified that his kernal have better battery life, you can find in dtrail's post)
2. flash it like a ROM, (boot to BMM recovery, switch to system3, then install package from ..., no wipe, no clean)
3. then enjoy, for details, please read in the post
help
PhoenixNghi said:
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
Click to expand...
Click to collapse
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
guruggk1988 said:
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
Click to expand...
Click to collapse
You did install it, right? So go to About and find Kernel version, you'll see JBX there
Issues with JBX 3.0
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
dguamache said:
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
Click to expand...
Click to collapse
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Hello_Motto said:
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Click to expand...
Click to collapse
i guess u better stick to shurikkb 25/2 build , its awesone , even i faced issues with the 27/2 dtrail like no signal , but shruikkb is marvelous:good:
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
Just click next til end?
dguamache said:
Just click next til end?
Click to expand...
Click to collapse
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
guruggk1988 said:
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
Click to expand...
Click to collapse
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
dguamache said:
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
Click to expand...
Click to collapse
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I'll care.
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
do you need to rename the custom kernel? the one ive got from git hub really boggled me a bit...Thx a bunch