Related
which current roms are ok to use with the new 4g phone? i think it would be nice to know. also is there a stock rooted 2.3.4 i can use when i get my phone this week? i see there is already a kernel we can use which is awesome.
fixxxer2008 said:
which current roms are ok to use with the new 4g phone? i think it would be nice to know. also is there a stock rooted 2.3.4 i can use when i get my phone this week? i see there is already a kernel we can use which is awesome.
Click to expand...
Click to collapse
I may be wrong but I don't believe any ROMs work with our phone yet. What I did in the mean time was just root using the fastboot method and flash CWM. Works like a champ
that's funny because netarch said last week they would work.
2.3.4 stock rom please devs!
The kernel works (I have it on my phone) as netarch stated, but rom's I *BELIEVE* are not compatible
fixxxer2008 said:
that's funny because netarch said last week they would work.
2.3.4 stock rom please devs!
Click to expand...
Click to collapse
I said the kernels should work fine, and roms possibly.
On closer inspection of a system dump from an ns4g there are some differences that will prevent current custom roms from working properly.
I'd need a guinea pig with an ns4g to assist me in testing to find out the exact changes necessary to make them compatible.
Atm there are at least 2 files I've found that would need to change.
You can go ahead and flash Net's kernel and start overclocking though!
I ended up getting so used to stock 2.3.4 rom that I am still on it!
Sent from my Nexus S using XDA App
netarchy said:
I said the kernels should work fine, and roms possibly.
On closer inspection of a system dump from an ns4g there are some differences that will prevent current custom roms from working properly.
I'd need a guinea pig with an ns4g to assist me in testing to find out the exact changes necessary to make them compatible.
Atm there are at least 2 files I've found that would need to change.
Click to expand...
Click to collapse
Guinea Pig here...
netarchy said:
I said the kernels should work fine, and roms possibly.
On closer inspection of a system dump from an ns4g there are some differences that will prevent current custom roms from working properly.
I'd need a guinea pig with an ns4g to assist me in testing to find out the exact changes necessary to make them compatible.
Atm there are at least 2 files I've found that would need to change.
Click to expand...
Click to collapse
Count me in as well as a guinea pig.
hey netarchy just to hopefully speed things up, yall can join the nexus IRC room
ill be making a new thread regarding its details. i know ill be there waiting to test anything out
I put a stock deodexed rom together. If anyone is interested, let me know. It has net's kernel and a few apps kanged from cm, file manager, spare parts, nothing major. Im testing now and and will share...If anyone wants
mikeyinid said:
I put a stock deodexed rom together. If anyone is interested, let me know. It has net's kernel and a few apps kanged from cm, file manager, spare parts, nothing major. Im testing now and and will share...If anyone wants
Click to expand...
Click to collapse
I'd be grateful!
dalvarez7 said:
I'd be grateful!
Click to expand...
Click to collapse
I think its good, Ill upload now
looking for that link....!!!!
Deodexing tool?
mikeyinid said:
I think its good, Ill upload now
Click to expand...
Click to collapse
Which tool did you use to deodex the rom? I was using xUltimate.
dalvarez7 said:
Which tool did you use to deodex the rom? I was using xUltimate.
Click to expand...
Click to collapse
Thats what I used. The rom is ready, but you will have to still flash superuser in recovery. I dont think the script is right. Im not really a dev after all Just wanted this, so I made it happen...
*I dont think my net could be any slower...still uploading
mikeyinid said:
Thats what I used. The rom is ready, but you will have to still flash superuser in recovery. I dont think the script is right. Im not really a dev after all Just wanted this, so I made it happen...
*I dont think my net could be any slower...still uploading
Click to expand...
Click to collapse
Did you have any trouble deodexing any of the apks? Mine keeps failing on NetworkLocation.odex. I just pulled the apk and odex files out of the origi_app folder to get around it.
Ok, so this is a stock deodexed ROM for the NS 4G. I am not a dev, you flash this at your own risk. With that being said, Im running it and I havent found anything wrong...yet. It does have netarchy's bfs kernel, you will need setcpu to oc, it is good up to 1.4. Your phone may not be. Do not check set on boot in setcpu until you know your phone is stable. You WILL have to flash superuser in recovery, you can flash it right after you flash the ROM, no need to reboot. So, here it is...
O yea, I added spare parts, CM file manager, and CM mms.apk so it doesnt have to be white...
>>>>>>I recommend wiping data before flashing<<<<<<
ROM:
http://www.mediafire.com/?xz680krzo40a7z7
THEN FLASH THIS BEFORE YOU REBOOT OR YOU WILL NOT HAVE ROOT ACCESS
SU:
http://www.mediafire.com/download.php?7mv65eu6ki4fcbd
>>>>>>I recommend wiping data before flashing<<<<<<
dalvarez7 said:
Did you have any trouble deodexing any of the apks? Mine keeps failing on NetworkLocation.odex. I just pulled the apk and odex files out of the origi_app folder to get around it.
Click to expand...
Click to collapse
I had the same problem, I worked around it.
I posted the ROM in the dev section, If you have any bugs or feedback, post it here http://forum.xda-developers.com/showthread.php?t=1070383
Thanks guys...
mikeyinid said:
I had the same problem, I worked around it.
Click to expand...
Click to collapse
i had no problem deodexing using the htc/sgs kitchen. just and fyi. it did everything with no errors.
First Semi-ROM hehehe
KG6/KG1 Deodexed CREDIT GOES TO WHITEHAWKX.
CWM CREDIT GOES TO DRHONK
Features:
-Rooted (obviously)
-TitaniumBackup
-Removed Bloat
-CWM WORKS! Includes DRHONK's KG4 CWM Kernel.
-FUGU Tweak for KG6 by Chadster
Original KG4 ROM is here.
If you have any requests or questions feel free to ask. I'll add any **free** app into the ROM by request, and I'm currently working on getting a theme in and working.
YOU STILL MUST DISABLE VOODOO BEFORE FLASHING THIS.
MAKE SURE YOU'VE FLASHED THE ORIGINAL KG4 LEAK, LOCATED HERE, BEFORE FLASHING THIS ROM.
YOU WILL NOT HAVE THE CORRECT BOOTLOADERS UNLESS YOU ODIN THIS FIRST.
FULL WIPE SUGGESTED KG6 BUILD v6.5 LINK
UPDATE ONLY NO-WIPE KG6 BUILD v6.5 LINK
**EXPERIMENTAL** FULL WIPE KH1 BUILD v7 LINK
IF ONLY UPDATING, DISABLE VOODOO BEFORE FLASHING.
As usual, flash with CWM. Make sure your mount points are
Code:
UNMOUNT
MOUNT
MOUNT
UNMOUNT
**remember, as usual, you're flashing at your own risk.**
Changelog
Build v1
-Initial Version, KG4
Build v2
-Added Zeam Launcher
-Fixed Build.prop to display correct ROM info in Settings->About
Build v3
-Fixed Camera.apk
-Separate downloads for KG4 with KF2 modem, and KG4 with original modem.
Build v4
-CWM SUPPORT THANKS TO DRHONK!
Build v5
-Final KG6 Version! Unless specifically requested, all future builds will be KG6 only.
-Added no-wipe version. Not sure if I did this right...but all it does is leave the /data partition alone, rather than formatting it. System partition/etc is still deleted.
Build v6
-New Fugu optimizations by Chadster..
Build v6.5
-Removed edited Build.prop; multiple issues reported with Bluetooth and WiFi.
-This is the FINAL BUILD I COULD TEST. Sold my phone, so the rest of the builds released will be experimental.
Build v7 EXPERIMENTAL COMINGSOON
-KH1 Download link now included. FEATURES KG4 CWM KERNEL. NO GUARANTEES, ~~~~~~~THIS IS EXPERIMENTAL~~~~~
Click to expand...
Click to collapse
F.A.Q.
Q: How can I get help?
A: Read below. If you want to be adequately helped, you must include all of the information in the format below.
Q1:What if (after flashing), I get a boot loop?
A: Either try flashing using the mounts listed above, or try these mounts.
Q2: Can I keep my apps if I have version v4 or lower?
A: Yes, you can! (*Billy Mays voice*) Flash the NO WIPE version located above.
Q3: Can I flash a different modem with this ROM?
A: Thanks to FBis251, YES! Go here, and flash with ODIN. Or choose between the KF2 and KG6 download links located above.
Q4: Download link isn't working, or my downloads keep getting interrupted?
A: Send me a message. I probably screwed something up in the upload.
Q5: What do I do if my apps FC, or my apps disappear after rebooting?
A: FIX PERMISSIONS! With our new CWM support, you (99%) won't need to do a factory reset anymore :]
Q6: Why can't I get into CWM?
A: Try using the QuickBoot app on the phone. Either that, or you can go ODIN the KG4 leak for the correct bootloaders, then flash KD1, then this ROM.
Q7: In CWM, under the Voodoo section, what should I enable?
A: ONLY System lagfix. If Voodoo Lagfix is enabled, you may experience background FC's.
To fix this, install BusyBox (from the market). **not guaranteed, experimental**
Q8: What's a FC?
A: FC, or Force Close, is when an application either freezes and does not respond, or closes itself due to an error. If you experience the occasional FC it's okay, but if you experience them regularly, or many in a row, there's definitely an issue. Post in this thread with the title of your message as FC ISSUE.
Q9: How do I install BusyBox?
A: Read here. You must have access to Market to download the required app.
Q10: What do I do if my SD card doesn't show up?
A: Go here, as mentioned by DSEXTON. http://rootzwiki.com/showthread.php?2496-HOW-to-get-ext4-conversion-to-work-for-your-GB-rom-P
IF YOU NEED HELP, INCLUDE THIS INFORMATION IN YOUR POST.
Previous ROM: Y/N, if Y, what
Flashed the leaked KG4: Y/N
Read the FAQ: Y/N
Formatted SDCARD: Y/N
Issue experienced: (fill this in yourself)
Mounts Flashed with: (fill this in yourself)
Version Flashed: Build version, and FULL WIPE, or UPDATE.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Does this have the rainbow issue without the kg4 bootloaders?
Sent from my SGH-T959V using XDA Premium App
cnote74 said:
Does this have the rainbow issue without the kg4 bootloaders?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
What's the rainbow issue?
I haven't experienced any issues on the ROM so far.
As far as recovery, that's not working right now.
danstheman7 said:
What's the rainbow issue?
I haven't experienced any issues on the ROM so far.
As far as recovery, that's not working right now.
Click to expand...
Click to collapse
Without kg4 bootloaders will we see the opening screen? Or will it be jumbled and messed up like the other leaks?
Sent from my SGH-T959V using XDA Premium App
cnote74 said:
Without kg4 bootloaders will we see the opening screen? Or will it be jumbled and messed up like the other leaks?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Well you see both the boot animation, and the "Galaxy S 4G" screen right before it, without any issues.
So I guess the answer to your question is no, there is no rainbow issue with this, because the bootloaders are removed (from what i've heard)
danstheman7 said:
What's the rainbow issue?
I haven't experienced any issues on the ROM so far.
As far as recovery, that's not working right now.
Click to expand...
Click to collapse
with the other leaks, if people odined the gingerbread roms without bootloaders, the froyo bootloaders would stick and they would see a "rainbow" screen at boot. this was fixed by reodining in a specific order with kf1/2, but then you lost your button mapping. in the end, it didnt really cause a problem for people who stuck with gingerbread, but a lot of people went back to froyo for cwm.
danstheman7 said:
Well you see both the boot animation, and the "Galaxy S 4G" screen right before it, without any issues.
So I guess the answer to your question is no, there is no rainbow issue with this, because the bootloaders are removed (from what i've heard)
Click to expand...
Click to collapse
Ok cool downloading now will disable voodoo and flash it.
Sent from my SGH-T959V using XDA Premium App
I have the rainbow issue but who cares
Sent from my SGH-T959V using XDA App
jager555 said:
with the other leaks, if people odined the gingerbread roms without bootloaders, the froyo bootloaders would stick and they would see a "rainbow" screen at boot. this was fixed by reodining in a specific order with kf1/2, but then you lost your button mapping. in the end, it didnt really cause a problem for people who stuck with gingerbread, but a lot of people went back to froyo for cwm.
Click to expand...
Click to collapse
Thanks for the explanation. As you can see, I'm a bit lost
mbernusg said:
I have the rainbow issue but who cares
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
yea, its not really a problem at all.
danstheman7 said:
Thanks for the explanation. As you can see, I'm a bit lost
Click to expand...
Click to collapse
np. let me know if you need help with that rom you're working on. i can at least do research. lol
This one has root aswell right?
Sent from my SGH-T959V using XDA App
Zixx said:
This one has root aswell right?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yep, it's the same KG4 released by Whitehawkx, except it has the changes noted on the first post.
(no bloat, titaniumbackup added, build.prop tweak provided by team acid)
danstheman7 said:
Yep, it's the same KG4 released by Whitehawkx, except it has the changes noted on the first post.
(no bloat, titaniumbackup added, build.prop tweak provided by team acid)
Click to expand...
Click to collapse
Wooo sweeet thanks man
Sent from my SGH-T959V using XDA App
how's wifi signal vs stock kg4?
jazzmanmonty said:
how's wifi signal vs stock kg4?
Click to expand...
Click to collapse
Not sure, my GS4G isn't my primary phone.
I've tested it and WiFi works fine, but not sure about how it is compared to stock.
jazzmanmonty said:
how's wifi signal vs stock kg4?
Click to expand...
Click to collapse
It seems to be pretty good, I'm using the base ROM that this ROM is based off of, I did the bloat removal and build.prop tweaks myself, so they're both basically the same thing.
For those of you that want the kd1 modem, just flash it right afterwards before you reboot. This may be a workaround to flashing without cwm for gb.
nevermind, don't do it. Fixes wi-fi signal, but I can't make calls
Rainbow solved
Guys, all you have to do is flash the KG4 Bootloaders. They are in the original leak. They have GB no rainbow bootloaders with froyo key mapping. Volume buttons + power = recovery. Volumes + USB = download.
thanks for the release!
could you be more specific on what you removed?
great work man.. thanks
So everyone is excited about KH1 I see, well.
I now have a fully functional deodexed KH1 breed. And now, why not make it look AOSP. As maker of GBTHEME, I am trying to integrate as much GB as possible into this rom. Also it will be there tonight or tomorrow.
Problems right now, Settings has an issue.
Screenshots up after i fix settings issue
Airfluip1
Wow this sounds awesome , are yoi including dsex tweaks and ext4 support.as well in it? And debloating oit?
Sent from my SGH-T959V using XDA App
I am not sure about the desex mods yet, but the system treats it like a stock touchwiz rom, so yes, full voodoo kg4 kernel support.
UPDATE: I AM ONE STEP CLOSER TO RELEASE, I FINALLY GOT OVERSCROLL WORKING
can you release a stock deodexed KH1?
chadster214 said:
can you release a stock deodexed KH1?
Click to expand...
Click to collapse
whitehawkx just released a stock deodexed version KH1.. check the original thread for the leak.
edit: here ya go
http://forum.xda-developers.com/showpost.php?p=16559610&postcount=103
That is nice, but I am making sure this is a no wipe version, so Anyone with KH1 Installed will have no problem with loss of data and etc....etc...
Hey have any of you guys noticed that on the keyboard after "A" and "S", it is "D""F""G""H", just like KD1, KF1, KF2, KG4, KG6, KH1!!!!
Maybe L will be finall version
Sent from my SGH-T959V using XDA App
Looking forward to the release.
Sent from my SGH-T959V using XDA Premium App
airfluip1 said:
That is nice, but I am making sure this is a no wipe version, so Anyone with KH1 Installed will have no problem with loss of data and etc....etc...
Hey have any of you guys noticed that on the keyboard after "A" and "S", it is "D""F""G""H", just like KD1, KF1, KF2, KG4, KG6, KH1!!!!
Click to expand...
Click to collapse
there's an explanation why they have these codes. i know for a fact that K = 2011 and the letters after that signifies the month. so H = August. I guess the number is the build number.
chadster214 said:
there's an explanation why they have these codes. i know for a fact that K = 2011 and the letters after that signifies the month. so H = August. I guess the number is the build number.
Click to expand...
Click to collapse
Yeah, that's correct. I remembered reading about that on the Vibrant forum. Mind-blowing stuff, lol. The number is the revision though.
KG6, for example, means out was built in July 2011, sixth revision.
patiently awaiting release thanks airfluip for the work put in. Can't wait to test this out
Same here.. ive flashed and reflashed all the roms we got... im bored now.. ive gotten to the point of switching over to a diff phone but im sit and wait for the Samsung Hercules < weird name by the way
l3g3nd.k1ll4h said:
Same here.. ive flashed and reflashed all the roms we got... im bored now.. ive gotten to the point of switching over to a diff phone but im sit and wait for the Samsung Hercules < weird name by the way
Click to expand...
Click to collapse
Same here. Releases day before my birthday
Sent from my SGH-T959V using XDA App
how will we install this?
When is your bday?
Sent from my SGH-T959V using XDA Premium App
I you are referring to me, why? I just wan't to know.
Is it possible for you to make an Odin version of this rom? It would really save a lot of steps in installing. Right now I can't get the gb bootloaders off the phone and trying to load ICBINB on top of a stock odin results in the phone hanging at bootup. The only way to get CWM on gb is by way of dr. honk's KG4 kernel odined on top of a gb install.
You must have the dr. honk kernel. Then you flash using recovery, then you can reflash the khi kernel.
I'm sorry, I looked inside an odin tar and it must be a bit more difficult to compile those four or five big installation files. A CWM file is easier to mix and match as I found out just now by following the suggestion and sticking the zimage from dr. honk's kernel in whitehawk's deodexed KH1. I thought for sure the phone would freeze but it didnt! That explains the preference for CWM. Maybe I can get a stable gb with CWM on there after all.
nazcalito said:
I'm sorry, I looked inside an odin tar and it must be a bit more difficult to compile those four or five big installation files. A CWM file is easier to mix and match as I found out just now by following the suggestion and sticking the zimage from dr. honk's kernel in whitehawk's deodexed KH1. I thought for sure the phone would freeze but it didnt! That explains the preference for CWM. Maybe I can get a stable gb with CWM on there after all.
Click to expand...
Click to collapse
You can mix and match using Heimdall. I'm thinking of switching to that instead of using Odin... It's been more reliable in some testing I've done recently, plus it works on other OSes besides Windows.
If you want to flash back to Froyo bootloaders, try this release:
http://forum.xda-developers.com/showthread.php?t=1129933
Raver added the bootloaders to it so you can install other Froyo ROMs afterward.
MidnightNinja released a place holder ROM until [email protected] gets updated, so I thought I'd share it. Here is the post from Rootz.
So, I have decided to put out a ROM that will serve as a place holder until withere2 gets Tweaked up and running.
This serves two purposes:
1. To get you on FP5
2. To get rid of the brown
I will be working on getting more hacks in there, its just difficult since school starts up tomorrow for me. As such, don't freak out over a lack of updates.
At this point, this is more of a glorified theme than a ROM. Certain elements I have wanted to add I just haven't had time, so I figured I'd upload before I leave.0
As usual, you are responsible if your phone dies.
Thanks:
Withere2: for the FP5 deodexed base
Sircrazy
Endless
CUJO
Gummy: For theming elements
and probably tons more people that I should have been keeping track of
To Do:
Lidroid Toggles
Reboot Menu
I apologize in advance if I missed you for your work. Please Message me and I will correct it. I have been doing this in between packing and I am a total mess right now
Flashing Instructions:
Mount System
Install Zip
Wipe Data
Reboot
Note: Download link will take time to work since I am uploading it over 3G.
Download:
Mods Included:
AOSP GB Theme
AOSP MMS, setup and a few other apps
GPS.conf edit
build prop tweaks
AOSP Sounds
Debloated(Tell me if I removed an important app)
If you are like me you miss the toggles from [email protected], here's something to get you by until [email protected] 2.? comes out. So after a bit of tinkering I bring to you Scrollable Toggle Widgets for this ROM only!
To change the Widgets and their order there is an app in the drawer called QuickPanelSettings, it's pretty much self explainable.
Disclaimer: I'm not responsible for anything you do.
OK, now the yada yada...
Mount System (I mount all of them just for old sake)
Wipe Cache
Wipe Dalvik Cache
Install NinjaROM_Toggles.zip
Reboot
Enjoy
Link: http://db.tt/zuJbBCZZ
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
cujo6801 said:
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
lol I was going to copy MidnightNinja's post verbatim, but I was to lazy to do that, so I did it the easy way. lol
cujo6801 said:
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
Just get MidnightNinja to post in this thread and it will be fine.
And I would bit.ly that Rootz link.
Sent from my SCH-I510 using xda premium
so can i get from Tweaked 1.5 to tweaked 2.2 FP5 by flashing Ninja rom via CWM then flashing tweaked 2.2 ROM only?
If I am thinking correctly the Ninja will get me new Kernal and modem, and I get to use those with the Tweaked ROM only? Do I stay rooted by doing it this way?
SlickNashville said:
so can i get from Tweaked 1.5 to tweaked 2.2 FP5 by flashing Ninja rom via CWM then flashing tweaked 2.2 ROM only?
If I am thinking correctly the Ninja will get me new Kernal and modem, and I get to use those with the Tweaked ROM only? Do I stay rooted by doing it this way?
Click to expand...
Click to collapse
You are correct...you'll have radios & kernel (fp5)
If you lose root just flash the su binary
SENT FROM THE DOG POUND
Updated the OP...
Ok.....I flashed Ninja and think I was on fp5...I did let it boot up and I played around with it for a few minutes. I saw 2 different signal strengths in the "about phone" section. So I think I was on fp5. Then I flashed tweaked 2.2 (ROM only via CWM) after mounting system then did a data wipe and reset.
Nowhere in the about phone does it say fp5.....how do I know if I am on fp5 kernel and radio? Kernel reads 2.6.35.7 EP4
And both basebands end in EP4. And build number ends in FP1.
How could this have happened? And is there a package I can flash over Tweaked 2.2 and just get fp5 kernal and radios?
Sent from my SCH-I510 using xda app-developers app.
Thanks for the help in advance.
SlickNashville said:
Ok.....I flashed Ninja and think I was on fp5...I did let it boot up and I played around with it for a few minutes. I saw 2 different signal strengths in the "about phone" section. So I think I was on fp5. Then I flashed tweaked 2.2 (ROM only via CWM) after mounting system then did a data wipe and reset.
Nowhere in the about phone does it say fp5.....how do I know if I am on fp5 kernel and radio? Kernel reads 2.6.35.7 EP4
And both basebands end in EP4. And build number ends in FP1.
How could this have happened? And is there a package I can flash over Tweaked 2.2 and just get fp5 kernal and radios?
Sent from my SCH-I510 using xda app-developers app.
Thanks for the help in advance.
Click to expand...
Click to collapse
if you want Tweaked with FP5, see this post: http://rootzwiki.com/topic/32311-fp5-deodexed-rom/
basically, just flash the updaterizer and then the FP5 kernel.
FWIW though, I installed tweaked via ODIN and everything reads FP1 except for the kernel (FP5).
jco23 said:
if you want Tweaked with FP5, see this post: http://rootzwiki.com/topic/32311-fp5-deodexed-rom/
basically, just flash the updaterizer and then the FP5 kernel.
FWIW though, I installed tweaked via ODIN and everything reads FP1 except for the kernel (FP5).
Click to expand...
Click to collapse
I don't have FP1H radios currenlty so the modemupdaterizer isn't working......I am trying to find a CWM of the FP1H radios, so I can install them and use the updaterizer, but after about 30 minutes of searching I can't find a CWM of just FP1H radios to install so I can updaterize them to FP5
If anyone can help me out, I appreciate it. Still cant find a CWM of the FP1 modems only
SlickNashville said:
I don't have FP1H radios currenlty so the modemupdaterizer isn't working......I am trying to find a CWM of the FP1H radios, so I can install them and use the updaterizer, but after about 30 minutes of searching I can't find a CWM of just FP1H radios to install so I can updaterize them to FP5
If anyone can help me out, I appreciate it. Still cant find a CWM of the FP1 modems only
Click to expand...
Click to collapse
Lucky for you, I haven't deleted all my Charge stuff yet. Here's a link. You need to be on EP4D radios for this to work. Just flash it in CWM.
http://dl.dropbox.com/u/12190007/EP4DtoFP1Modem.zip
shrike1978 said:
Lucky for you, I haven't deleted all my Charge stuff yet. Here's a link. You need to be on EP4D radios for this to work. Just flash it in CWM.
http://dl.dropbox.com/u/12190007/EP4DtoFP1Modem.zip
Click to expand...
Click to collapse
That worked!!! Thanks
I am now showing FP5 for both of my baseband versions and FP1 for Kernel and Build number......
Not sure if I have to edit build properties manually still to get updates to stop or should that have stopped it. I tried to edit build properties with File Manager but kept getting error messages.....Any thoughts? I know not to use ES Explorer.....
Also I am getting great service on 4G but on 3G it is dropping out like crazy, can't even connect.....? Any thoughts? Since I can't reflash radios due to having to have a previous version to flash over to get the newest FP5.....(I had to have EP4 to get FP1 in order to get FP5)
Thanks again for all the help....
Regarding the notification, try Paul's cwm flash files.
Sent from my SCH-I510 using Xparent ICS Tapatalk 2
Any one experiencing problems with the browser and messaging apps? Whenever I open the browser I get a force close, and whenever I open the settings in the messaging app I get a force close
the sandman89 said:
Any one experiencing problems with the browser and messaging apps? Whenever I open the browser I get a force close, and whenever I open the settings in the messaging app I get a force close
Click to expand...
Click to collapse
Yeah, the messaging settings are messed up, I'll see if I can tinker. I haven't had a browser problem.
- dSlice
Droid Charge powered by Stock FP5 :-\
I've taken the ota to fp5, flashed cwm and rooted. Flashed deodexed rooted rom. Flashed tweaked 2.2......even flashed 0504 pbj kernel...so far so good.....just can't see my signal bars?????......and the only thing reading fp1 is my build
Sent from my SCH-I510 using xda app-developers app
Shogun_Iggy said:
I've taken the ota to fp5, flashed cwm and rooted. Flashed deodexed rooted rom. Flashed tweaked 2.2......even flashed 0504 pbj kernel...so far so good.....just can't see my signal bars?????......and the only thing reading fp1 is my build
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
Yep they don't work with fp1 build and fp5 radios
SENT FROM THE DOG POUND
This may be a stupid question but where are the lockscreen settings located? Also, does this rom not have push email?
Sent from my SCH-I510 using xda app-developers app
cnoevl21 said:
This may be a stupid question but where are the lockscreen settings located? Also, does this rom not have push email?
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
NinjaROM does NOT have TSM parts. it is basically a themed FP5 ROM (an FP5 placeholder until Dwith completes tweaked 3.0). so the lockscreen settings is the same as stock (under location & security).
the stock e-mail app should have push notification.
Hello all,
I made this over at the GNex forums for a stock GNex 4.2/4.2.1 kernel... here it is for the Nexus 7 for those that accidentally flashed a 4.1.2 kernel or just want to get back to stock.
Flash at your own risk, should work just fine though!
UPDATED: Kernel should work now! Sorry about the bad zip before!
Will it work on 4.1.2? I have AOKP on my device, would like to flash this, just need to check if it's safe...
Cheers
Sent from my Nexus 7 using xda app-developers app
where were you couple of days ago when I was dealing with the issue - trying to flash stock kernel.....wish you posted this before.
I will save this just in case :silly:
thanks!!!
I flashed LeanKernel and then wanted to go back to stock kernel before flashing latest Faux Kernel.
So I have just flashed your kernel but "about tablet" is telling me I still have LeanKernel installed?
If you can overclock then you're still on lean kernel. Either way, I'd suggest a reflash.
Sent from my Nexus 7 using xda premium
Caliyork said:
If you can overclock then you're still on lean kernel. Either way, I'd suggest a reflash.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
It was definetely still on LeanKernel, I tried it twice.
Only issue could be that I was using an older version of TWRP that wasn't updated for 4.2, but it seemed to flash ok.
edit
Ok, tried it again now I have the updated TWRP and the same thing happens...i.e. nothing, it flashes in the normal way but changes nothing.
This is all wrong. The boot.img inside does not match the one from the N7 nakasi factory image and the updater-script is written for the Galaxy Nexus.
Code:
"of=/dev/block/platform/omap/omap_hsmmc.0/by-name/boot");
N7 certainly doesn't run OMAP. Flash at your own risk, indeed.
I urge you to take this down and make sure you know you've got it right before you put it up again. Only saving grace here is you were using the platform by-name method (which just plain won't work on the N7) instead of the actual mmc block names or you could have really messed up some peoples' devices.
osm0sis said:
This is all wrong. The boot.img inside does not match the one from the N7 nakasi factory image and the updater-script is written for the Galaxy Nexus.
Code:
"of=/dev/block/platform/omap/omap_hsmmc.0/by-name/boot");
N7 certainly doesn't run OMAP. Flash at your own risk, indeed.
Click to expand...
Click to collapse
My mistake. I thought it would just transfer over. I will fix the link... Didn't realize when I tested it I already had the stock kernel on there. Gimme a minute to fix it!
OK should be fixed and good to go! Again, my apologies!
Sent from my Galaxy Nexus using Tapatalk 2
stonebear said:
It was definetely still on LeanKernel, I tried it twice.
Only issue could be that I was using an older version of TWRP that wasn't updated for 4.2, but it seemed to flash ok.
edit
Ok, tried it again now I have the updated TWRP and the same thing happens...i.e. nothing, it flashes in the normal way but changes nothing.
Click to expand...
Click to collapse
Please try again... I have updated my zip and tested it by flashing a 4.1.2 kernel, having the device sit at the X for a few minutes without doing anything (to test a non-working kernel) then flashing my zip, and my N7 is back up and running again.
I am still learning about kernel stuff... sorry about any confusion!
SkaldfraNorden said:
Will it work on 4.1.2? I have AOKP on my device, would like to flash this, just need to check if it's safe...
Cheers
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Negative. This is the stock 4.2 kernel... I found the stock 4.1.2 kernel on XDA... Should be easy to find!
Sent from my Galaxy Nexus using Tapatalk 2
Where can I find the stock kernel for the Galaxy Nexus running on 4.2? If you can redirect me to the link, I'll greatly appreciate it. Thanks in advance.
evaradar said:
Where can I find the stock kernel for the Galaxy Nexus running on 4.2? If you can redirect me to the link, I'll greatly appreciate it. Thanks in advance.
Click to expand...
Click to collapse
wasn't that hard to find out, but here you go: stock kernel
This is JOP40C kernel for 4.2 but will it work on JOP40D 4.2.1 stock ROM please ?
I've added this kernel to the Nexus 7 Complete Index
Sent from my Nexus 7 using xda premium
..
BTW..Excellent system stability with this kernel and rasbeanjelly ROM. Tested on my daughter.
cydef said:
This is JOP40C kernel for 4.2 but will it work on JOP40D 4.2.1 stock ROM please ?
Click to expand...
Click to collapse
+1
Sent from my Nexus 7 using xda app-developers app
Can anyone confirm if the kernel listed (jop40c) is the actual kernel used in the stock 4.2.1 system? The build is jop40d, and the question seams to be getting overlooked. I cannot find the stock jop40d 4.2.1 kernel anywhere, and just do not have any interest at this time in flashing the factory image/re-rooting etc. Any help would be appreciated.
annoyingduck said:
Can anyone confirm if the kernel listed (jop40c) is the actual kernel used in the stock 4.2.1 system? The build is jop40d, and the question seams to be getting overlooked. I cannot find the stock jop40d 4.2.1 kernel anywhere, and just do not have any interest at this time in flashing the factory image/re-rooting etc. Any help would be appreciated.
Click to expand...
Click to collapse
This.. I was about to post, my N7 (16g, wifi) is JOP40D as well, not 40C.
Thinking about trying out a custom kernel, but want the stock to fall back on, as it's super stable.
khaytsus said:
This.. I was about to post, my N7 (16g, wifi) is JOP40D as well, not 40C.
Thinking about trying out a custom kernel, but want the stock to fall back on, as it's super stable.
Click to expand...
Click to collapse
As it turns out, I built a "slightly rooted" JOP40D stock flash kit yesterday (mods to build.prop in boot.img, and su/SuperSU in system.img). I'm posting this reply from that.
I started with the Google JOP40D (grouper) distro to do that. I thought I was going to need to unpack the boot.img from the OP's .zip to do comparisons of the kernels (to answer your question) ... but it turns out that his boot.img has the same MD5 sig as the boot.img from Google's JOP40D... and the OP's updater-script merely flashes boot.img to the /boot partition.
That means one of two things: either the two successive Google releases (for grouper) had identical boot images (which implies identical kernels), or there is some mistake by the OP. (I don't have the 40C distro to check ... only picked up my N7 a few days ago.)
It should work in your specific case though, as you are on JOP40D.
In any event, flashing boot.img is way way more than just a kernel replacement. I haven't looked at it for a while, but I would suppose that Koush's kernel flasher is a much more appropriate technique for switching ONLY the kernel out from underneath an arbitrary ROM.
cheers
That's great info there. I'm searching for the simplicity of just flashing a kernel instead of pushing the entire boot image. Thanks for a step in clarifying this question
Sent from my Nexus 7 using xda premium