MidnightNinja released a place holder ROM until [email protected] gets updated, so I thought I'd share it. Here is the post from Rootz.
So, I have decided to put out a ROM that will serve as a place holder until withere2 gets Tweaked up and running.
This serves two purposes:
1. To get you on FP5
2. To get rid of the brown
I will be working on getting more hacks in there, its just difficult since school starts up tomorrow for me. As such, don't freak out over a lack of updates.
At this point, this is more of a glorified theme than a ROM. Certain elements I have wanted to add I just haven't had time, so I figured I'd upload before I leave.0
As usual, you are responsible if your phone dies.
Thanks:
Withere2: for the FP5 deodexed base
Sircrazy
Endless
CUJO
Gummy: For theming elements
and probably tons more people that I should have been keeping track of
To Do:
Lidroid Toggles
Reboot Menu
I apologize in advance if I missed you for your work. Please Message me and I will correct it. I have been doing this in between packing and I am a total mess right now
Flashing Instructions:
Mount System
Install Zip
Wipe Data
Reboot
Note: Download link will take time to work since I am uploading it over 3G.
Download:
Mods Included:
AOSP GB Theme
AOSP MMS, setup and a few other apps
GPS.conf edit
build prop tweaks
AOSP Sounds
Debloated(Tell me if I removed an important app)
If you are like me you miss the toggles from [email protected], here's something to get you by until [email protected] 2.? comes out. So after a bit of tinkering I bring to you Scrollable Toggle Widgets for this ROM only!
To change the Widgets and their order there is an app in the drawer called QuickPanelSettings, it's pretty much self explainable.
Disclaimer: I'm not responsible for anything you do.
OK, now the yada yada...
Mount System (I mount all of them just for old sake)
Wipe Cache
Wipe Dalvik Cache
Install NinjaROM_Toggles.zip
Reboot
Enjoy
Link: http://db.tt/zuJbBCZZ
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
cujo6801 said:
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
lol I was going to copy MidnightNinja's post verbatim, but I was to lazy to do that, so I did it the easy way. lol
cujo6801 said:
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
Just get MidnightNinja to post in this thread and it will be fine.
And I would bit.ly that Rootz link.
Sent from my SCH-I510 using xda premium
so can i get from Tweaked 1.5 to tweaked 2.2 FP5 by flashing Ninja rom via CWM then flashing tweaked 2.2 ROM only?
If I am thinking correctly the Ninja will get me new Kernal and modem, and I get to use those with the Tweaked ROM only? Do I stay rooted by doing it this way?
SlickNashville said:
so can i get from Tweaked 1.5 to tweaked 2.2 FP5 by flashing Ninja rom via CWM then flashing tweaked 2.2 ROM only?
If I am thinking correctly the Ninja will get me new Kernal and modem, and I get to use those with the Tweaked ROM only? Do I stay rooted by doing it this way?
Click to expand...
Click to collapse
You are correct...you'll have radios & kernel (fp5)
If you lose root just flash the su binary
SENT FROM THE DOG POUND
Updated the OP...
Ok.....I flashed Ninja and think I was on fp5...I did let it boot up and I played around with it for a few minutes. I saw 2 different signal strengths in the "about phone" section. So I think I was on fp5. Then I flashed tweaked 2.2 (ROM only via CWM) after mounting system then did a data wipe and reset.
Nowhere in the about phone does it say fp5.....how do I know if I am on fp5 kernel and radio? Kernel reads 2.6.35.7 EP4
And both basebands end in EP4. And build number ends in FP1.
How could this have happened? And is there a package I can flash over Tweaked 2.2 and just get fp5 kernal and radios?
Sent from my SCH-I510 using xda app-developers app.
Thanks for the help in advance.
SlickNashville said:
Ok.....I flashed Ninja and think I was on fp5...I did let it boot up and I played around with it for a few minutes. I saw 2 different signal strengths in the "about phone" section. So I think I was on fp5. Then I flashed tweaked 2.2 (ROM only via CWM) after mounting system then did a data wipe and reset.
Nowhere in the about phone does it say fp5.....how do I know if I am on fp5 kernel and radio? Kernel reads 2.6.35.7 EP4
And both basebands end in EP4. And build number ends in FP1.
How could this have happened? And is there a package I can flash over Tweaked 2.2 and just get fp5 kernal and radios?
Sent from my SCH-I510 using xda app-developers app.
Thanks for the help in advance.
Click to expand...
Click to collapse
if you want Tweaked with FP5, see this post: http://rootzwiki.com/topic/32311-fp5-deodexed-rom/
basically, just flash the updaterizer and then the FP5 kernel.
FWIW though, I installed tweaked via ODIN and everything reads FP1 except for the kernel (FP5).
jco23 said:
if you want Tweaked with FP5, see this post: http://rootzwiki.com/topic/32311-fp5-deodexed-rom/
basically, just flash the updaterizer and then the FP5 kernel.
FWIW though, I installed tweaked via ODIN and everything reads FP1 except for the kernel (FP5).
Click to expand...
Click to collapse
I don't have FP1H radios currenlty so the modemupdaterizer isn't working......I am trying to find a CWM of the FP1H radios, so I can install them and use the updaterizer, but after about 30 minutes of searching I can't find a CWM of just FP1H radios to install so I can updaterize them to FP5
If anyone can help me out, I appreciate it. Still cant find a CWM of the FP1 modems only
SlickNashville said:
I don't have FP1H radios currenlty so the modemupdaterizer isn't working......I am trying to find a CWM of the FP1H radios, so I can install them and use the updaterizer, but after about 30 minutes of searching I can't find a CWM of just FP1H radios to install so I can updaterize them to FP5
If anyone can help me out, I appreciate it. Still cant find a CWM of the FP1 modems only
Click to expand...
Click to collapse
Lucky for you, I haven't deleted all my Charge stuff yet. Here's a link. You need to be on EP4D radios for this to work. Just flash it in CWM.
http://dl.dropbox.com/u/12190007/EP4DtoFP1Modem.zip
shrike1978 said:
Lucky for you, I haven't deleted all my Charge stuff yet. Here's a link. You need to be on EP4D radios for this to work. Just flash it in CWM.
http://dl.dropbox.com/u/12190007/EP4DtoFP1Modem.zip
Click to expand...
Click to collapse
That worked!!! Thanks
I am now showing FP5 for both of my baseband versions and FP1 for Kernel and Build number......
Not sure if I have to edit build properties manually still to get updates to stop or should that have stopped it. I tried to edit build properties with File Manager but kept getting error messages.....Any thoughts? I know not to use ES Explorer.....
Also I am getting great service on 4G but on 3G it is dropping out like crazy, can't even connect.....? Any thoughts? Since I can't reflash radios due to having to have a previous version to flash over to get the newest FP5.....(I had to have EP4 to get FP1 in order to get FP5)
Thanks again for all the help....
Regarding the notification, try Paul's cwm flash files.
Sent from my SCH-I510 using Xparent ICS Tapatalk 2
Any one experiencing problems with the browser and messaging apps? Whenever I open the browser I get a force close, and whenever I open the settings in the messaging app I get a force close
the sandman89 said:
Any one experiencing problems with the browser and messaging apps? Whenever I open the browser I get a force close, and whenever I open the settings in the messaging app I get a force close
Click to expand...
Click to collapse
Yeah, the messaging settings are messed up, I'll see if I can tinker. I haven't had a browser problem.
- dSlice
Droid Charge powered by Stock FP5 :-\
I've taken the ota to fp5, flashed cwm and rooted. Flashed deodexed rooted rom. Flashed tweaked 2.2......even flashed 0504 pbj kernel...so far so good.....just can't see my signal bars?????......and the only thing reading fp1 is my build
Sent from my SCH-I510 using xda app-developers app
Shogun_Iggy said:
I've taken the ota to fp5, flashed cwm and rooted. Flashed deodexed rooted rom. Flashed tweaked 2.2......even flashed 0504 pbj kernel...so far so good.....just can't see my signal bars?????......and the only thing reading fp1 is my build
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
Yep they don't work with fp1 build and fp5 radios
SENT FROM THE DOG POUND
This may be a stupid question but where are the lockscreen settings located? Also, does this rom not have push email?
Sent from my SCH-I510 using xda app-developers app
cnoevl21 said:
This may be a stupid question but where are the lockscreen settings located? Also, does this rom not have push email?
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
NinjaROM does NOT have TSM parts. it is basically a themed FP5 ROM (an FP5 placeholder until Dwith completes tweaked 3.0). so the lockscreen settings is the same as stock (under location & security).
the stock e-mail app should have push notification.
Related
[ROM] 2011-08-04 - ROOTED "Official Update" - x99_GB_Sense_Stock_Rooted_2.76.651.4/5
This is *completely* based on NFX's release of 2.72.651.2
- modded kernel ramdisk for root
I flashed this ROM with *nothing* else loaded on my phone, and it booted up and is running just fine so far.
My usual routine:
- format system
- wipe data / factory reset
- install ROM
If you flash this over another ROM without wiping, you may encounter errors.
Examples:
- Opening the settings in the messaging app = force close. Fix this by wiping the data for the messaging app.
- Wallpaper picker not showing previews.
Download 2.76.651.4 ROM v1: http://bit.ly/iNX9qc md5sum: 793da0847bd2b452cc7887480abae029
Download patched OTA 2.76.651.5 patch: http://bit.ly/pQ1KpP DOES NOT REMOVE ROOT!
is this the one with the newest update? 2.76.651.4?
Yeah, I named it wrong... one second.
FIXED. lol ... that's what I get for rushing.
Thank you will test tonight
Sent from my PG06100 using XDA Premium App
so basically the difference between this and nef is that theres a kernal we can adjust using something like cpu controller?
dude that was fast so now i dont have to unroot my phone in order to update to this new Offical update. thanks you da man
popasmurfn23 said:
so basically the difference between this and nef is that theres a kernal we can adjust using something like cpu controller?
Click to expand...
Click to collapse
No custom kernel yet... at least not until HTC releases source code.
For this, I had to modify a file within the kernel so that we can have root.
Good stuff, I will try this out tonight? Is it basically the OTA with root?
sense 2.1?
In the leaked version it had sense 2.1? Is it the same for this version or does it only have 1.0
Does this kernel have bfs in it?
Sent from my PG06100 using XDA Premium App
sparksco said:
Does this kernel have bfs in it?
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
dude, it a stock rom. stock kernel. he just said that he didn't modify it.
...waiting to hear about a couple of other successful rom flashes before i put this on my wife's shift...
Sorry I should of asked first if this kernel is compatible with bfs or not
Sent from my PG06100 using XDA Premium App
dave0704 said:
Good stuff, I will try this out tonight? Is it basically the OTA with root?
Click to expand...
Click to collapse
Exactly that.
Deleted by member
leave for an hour to get a hair cut and come back to see a flashable.. good stuff.
Newkidds post
Amazingly smooth running rom, blows away the old mikshifted-g roms. 2.3.3 android with 2.1 sense people. The op link does not work download the link from newkidd. Comes with root
x99percent said:
Exactly that.
Click to expand...
Click to collapse
Including the new WiMax radio? Just want to make sure
c00ller said:
Including the new WiMax radio? Just want to make sure
Click to expand...
Click to collapse
Yeah has the new wi-max radio
This thread deserves five starts just for the root feature. Great job
Hows the battery life to whoever tested this?
Sent from my Evo SHIFT on Evervolv ROM with x99 Kernel using XDA App
First Semi-ROM hehehe
KG6/KG1 Deodexed CREDIT GOES TO WHITEHAWKX.
CWM CREDIT GOES TO DRHONK
Features:
-Rooted (obviously)
-TitaniumBackup
-Removed Bloat
-CWM WORKS! Includes DRHONK's KG4 CWM Kernel.
-FUGU Tweak for KG6 by Chadster
Original KG4 ROM is here.
If you have any requests or questions feel free to ask. I'll add any **free** app into the ROM by request, and I'm currently working on getting a theme in and working.
YOU STILL MUST DISABLE VOODOO BEFORE FLASHING THIS.
MAKE SURE YOU'VE FLASHED THE ORIGINAL KG4 LEAK, LOCATED HERE, BEFORE FLASHING THIS ROM.
YOU WILL NOT HAVE THE CORRECT BOOTLOADERS UNLESS YOU ODIN THIS FIRST.
FULL WIPE SUGGESTED KG6 BUILD v6.5 LINK
UPDATE ONLY NO-WIPE KG6 BUILD v6.5 LINK
**EXPERIMENTAL** FULL WIPE KH1 BUILD v7 LINK
IF ONLY UPDATING, DISABLE VOODOO BEFORE FLASHING.
As usual, flash with CWM. Make sure your mount points are
Code:
UNMOUNT
MOUNT
MOUNT
UNMOUNT
**remember, as usual, you're flashing at your own risk.**
Changelog
Build v1
-Initial Version, KG4
Build v2
-Added Zeam Launcher
-Fixed Build.prop to display correct ROM info in Settings->About
Build v3
-Fixed Camera.apk
-Separate downloads for KG4 with KF2 modem, and KG4 with original modem.
Build v4
-CWM SUPPORT THANKS TO DRHONK!
Build v5
-Final KG6 Version! Unless specifically requested, all future builds will be KG6 only.
-Added no-wipe version. Not sure if I did this right...but all it does is leave the /data partition alone, rather than formatting it. System partition/etc is still deleted.
Build v6
-New Fugu optimizations by Chadster..
Build v6.5
-Removed edited Build.prop; multiple issues reported with Bluetooth and WiFi.
-This is the FINAL BUILD I COULD TEST. Sold my phone, so the rest of the builds released will be experimental.
Build v7 EXPERIMENTAL COMINGSOON
-KH1 Download link now included. FEATURES KG4 CWM KERNEL. NO GUARANTEES, ~~~~~~~THIS IS EXPERIMENTAL~~~~~
Click to expand...
Click to collapse
F.A.Q.
Q: How can I get help?
A: Read below. If you want to be adequately helped, you must include all of the information in the format below.
Q1:What if (after flashing), I get a boot loop?
A: Either try flashing using the mounts listed above, or try these mounts.
Q2: Can I keep my apps if I have version v4 or lower?
A: Yes, you can! (*Billy Mays voice*) Flash the NO WIPE version located above.
Q3: Can I flash a different modem with this ROM?
A: Thanks to FBis251, YES! Go here, and flash with ODIN. Or choose between the KF2 and KG6 download links located above.
Q4: Download link isn't working, or my downloads keep getting interrupted?
A: Send me a message. I probably screwed something up in the upload.
Q5: What do I do if my apps FC, or my apps disappear after rebooting?
A: FIX PERMISSIONS! With our new CWM support, you (99%) won't need to do a factory reset anymore :]
Q6: Why can't I get into CWM?
A: Try using the QuickBoot app on the phone. Either that, or you can go ODIN the KG4 leak for the correct bootloaders, then flash KD1, then this ROM.
Q7: In CWM, under the Voodoo section, what should I enable?
A: ONLY System lagfix. If Voodoo Lagfix is enabled, you may experience background FC's.
To fix this, install BusyBox (from the market). **not guaranteed, experimental**
Q8: What's a FC?
A: FC, or Force Close, is when an application either freezes and does not respond, or closes itself due to an error. If you experience the occasional FC it's okay, but if you experience them regularly, or many in a row, there's definitely an issue. Post in this thread with the title of your message as FC ISSUE.
Q9: How do I install BusyBox?
A: Read here. You must have access to Market to download the required app.
Q10: What do I do if my SD card doesn't show up?
A: Go here, as mentioned by DSEXTON. http://rootzwiki.com/showthread.php?2496-HOW-to-get-ext4-conversion-to-work-for-your-GB-rom-P
IF YOU NEED HELP, INCLUDE THIS INFORMATION IN YOUR POST.
Previous ROM: Y/N, if Y, what
Flashed the leaked KG4: Y/N
Read the FAQ: Y/N
Formatted SDCARD: Y/N
Issue experienced: (fill this in yourself)
Mounts Flashed with: (fill this in yourself)
Version Flashed: Build version, and FULL WIPE, or UPDATE.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Does this have the rainbow issue without the kg4 bootloaders?
Sent from my SGH-T959V using XDA Premium App
cnote74 said:
Does this have the rainbow issue without the kg4 bootloaders?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
What's the rainbow issue?
I haven't experienced any issues on the ROM so far.
As far as recovery, that's not working right now.
danstheman7 said:
What's the rainbow issue?
I haven't experienced any issues on the ROM so far.
As far as recovery, that's not working right now.
Click to expand...
Click to collapse
Without kg4 bootloaders will we see the opening screen? Or will it be jumbled and messed up like the other leaks?
Sent from my SGH-T959V using XDA Premium App
cnote74 said:
Without kg4 bootloaders will we see the opening screen? Or will it be jumbled and messed up like the other leaks?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Well you see both the boot animation, and the "Galaxy S 4G" screen right before it, without any issues.
So I guess the answer to your question is no, there is no rainbow issue with this, because the bootloaders are removed (from what i've heard)
danstheman7 said:
What's the rainbow issue?
I haven't experienced any issues on the ROM so far.
As far as recovery, that's not working right now.
Click to expand...
Click to collapse
with the other leaks, if people odined the gingerbread roms without bootloaders, the froyo bootloaders would stick and they would see a "rainbow" screen at boot. this was fixed by reodining in a specific order with kf1/2, but then you lost your button mapping. in the end, it didnt really cause a problem for people who stuck with gingerbread, but a lot of people went back to froyo for cwm.
danstheman7 said:
Well you see both the boot animation, and the "Galaxy S 4G" screen right before it, without any issues.
So I guess the answer to your question is no, there is no rainbow issue with this, because the bootloaders are removed (from what i've heard)
Click to expand...
Click to collapse
Ok cool downloading now will disable voodoo and flash it.
Sent from my SGH-T959V using XDA Premium App
I have the rainbow issue but who cares
Sent from my SGH-T959V using XDA App
jager555 said:
with the other leaks, if people odined the gingerbread roms without bootloaders, the froyo bootloaders would stick and they would see a "rainbow" screen at boot. this was fixed by reodining in a specific order with kf1/2, but then you lost your button mapping. in the end, it didnt really cause a problem for people who stuck with gingerbread, but a lot of people went back to froyo for cwm.
Click to expand...
Click to collapse
Thanks for the explanation. As you can see, I'm a bit lost
mbernusg said:
I have the rainbow issue but who cares
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
yea, its not really a problem at all.
danstheman7 said:
Thanks for the explanation. As you can see, I'm a bit lost
Click to expand...
Click to collapse
np. let me know if you need help with that rom you're working on. i can at least do research. lol
This one has root aswell right?
Sent from my SGH-T959V using XDA App
Zixx said:
This one has root aswell right?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yep, it's the same KG4 released by Whitehawkx, except it has the changes noted on the first post.
(no bloat, titaniumbackup added, build.prop tweak provided by team acid)
danstheman7 said:
Yep, it's the same KG4 released by Whitehawkx, except it has the changes noted on the first post.
(no bloat, titaniumbackup added, build.prop tweak provided by team acid)
Click to expand...
Click to collapse
Wooo sweeet thanks man
Sent from my SGH-T959V using XDA App
how's wifi signal vs stock kg4?
jazzmanmonty said:
how's wifi signal vs stock kg4?
Click to expand...
Click to collapse
Not sure, my GS4G isn't my primary phone.
I've tested it and WiFi works fine, but not sure about how it is compared to stock.
jazzmanmonty said:
how's wifi signal vs stock kg4?
Click to expand...
Click to collapse
It seems to be pretty good, I'm using the base ROM that this ROM is based off of, I did the bloat removal and build.prop tweaks myself, so they're both basically the same thing.
For those of you that want the kd1 modem, just flash it right afterwards before you reboot. This may be a workaround to flashing without cwm for gb.
nevermind, don't do it. Fixes wi-fi signal, but I can't make calls
Rainbow solved
Guys, all you have to do is flash the KG4 Bootloaders. They are in the original leak. They have GB no rainbow bootloaders with froyo key mapping. Volume buttons + power = recovery. Volumes + USB = download.
thanks for the release!
could you be more specific on what you removed?
great work man.. thanks
So everyone is excited about KH1 I see, well.
I now have a fully functional deodexed KH1 breed. And now, why not make it look AOSP. As maker of GBTHEME, I am trying to integrate as much GB as possible into this rom. Also it will be there tonight or tomorrow.
Problems right now, Settings has an issue.
Screenshots up after i fix settings issue
Airfluip1
Wow this sounds awesome , are yoi including dsex tweaks and ext4 support.as well in it? And debloating oit?
Sent from my SGH-T959V using XDA App
I am not sure about the desex mods yet, but the system treats it like a stock touchwiz rom, so yes, full voodoo kg4 kernel support.
UPDATE: I AM ONE STEP CLOSER TO RELEASE, I FINALLY GOT OVERSCROLL WORKING
can you release a stock deodexed KH1?
chadster214 said:
can you release a stock deodexed KH1?
Click to expand...
Click to collapse
whitehawkx just released a stock deodexed version KH1.. check the original thread for the leak.
edit: here ya go
http://forum.xda-developers.com/showpost.php?p=16559610&postcount=103
That is nice, but I am making sure this is a no wipe version, so Anyone with KH1 Installed will have no problem with loss of data and etc....etc...
Hey have any of you guys noticed that on the keyboard after "A" and "S", it is "D""F""G""H", just like KD1, KF1, KF2, KG4, KG6, KH1!!!!
Maybe L will be finall version
Sent from my SGH-T959V using XDA App
Looking forward to the release.
Sent from my SGH-T959V using XDA Premium App
airfluip1 said:
That is nice, but I am making sure this is a no wipe version, so Anyone with KH1 Installed will have no problem with loss of data and etc....etc...
Hey have any of you guys noticed that on the keyboard after "A" and "S", it is "D""F""G""H", just like KD1, KF1, KF2, KG4, KG6, KH1!!!!
Click to expand...
Click to collapse
there's an explanation why they have these codes. i know for a fact that K = 2011 and the letters after that signifies the month. so H = August. I guess the number is the build number.
chadster214 said:
there's an explanation why they have these codes. i know for a fact that K = 2011 and the letters after that signifies the month. so H = August. I guess the number is the build number.
Click to expand...
Click to collapse
Yeah, that's correct. I remembered reading about that on the Vibrant forum. Mind-blowing stuff, lol. The number is the revision though.
KG6, for example, means out was built in July 2011, sixth revision.
patiently awaiting release thanks airfluip for the work put in. Can't wait to test this out
Same here.. ive flashed and reflashed all the roms we got... im bored now.. ive gotten to the point of switching over to a diff phone but im sit and wait for the Samsung Hercules < weird name by the way
l3g3nd.k1ll4h said:
Same here.. ive flashed and reflashed all the roms we got... im bored now.. ive gotten to the point of switching over to a diff phone but im sit and wait for the Samsung Hercules < weird name by the way
Click to expand...
Click to collapse
Same here. Releases day before my birthday
Sent from my SGH-T959V using XDA App
how will we install this?
When is your bday?
Sent from my SGH-T959V using XDA Premium App
I you are referring to me, why? I just wan't to know.
Is it possible for you to make an Odin version of this rom? It would really save a lot of steps in installing. Right now I can't get the gb bootloaders off the phone and trying to load ICBINB on top of a stock odin results in the phone hanging at bootup. The only way to get CWM on gb is by way of dr. honk's KG4 kernel odined on top of a gb install.
You must have the dr. honk kernel. Then you flash using recovery, then you can reflash the khi kernel.
I'm sorry, I looked inside an odin tar and it must be a bit more difficult to compile those four or five big installation files. A CWM file is easier to mix and match as I found out just now by following the suggestion and sticking the zimage from dr. honk's kernel in whitehawk's deodexed KH1. I thought for sure the phone would freeze but it didnt! That explains the preference for CWM. Maybe I can get a stable gb with CWM on there after all.
nazcalito said:
I'm sorry, I looked inside an odin tar and it must be a bit more difficult to compile those four or five big installation files. A CWM file is easier to mix and match as I found out just now by following the suggestion and sticking the zimage from dr. honk's kernel in whitehawk's deodexed KH1. I thought for sure the phone would freeze but it didnt! That explains the preference for CWM. Maybe I can get a stable gb with CWM on there after all.
Click to expand...
Click to collapse
You can mix and match using Heimdall. I'm thinking of switching to that instead of using Odin... It's been more reliable in some testing I've done recently, plus it works on other OSes besides Windows.
If you want to flash back to Froyo bootloaders, try this release:
http://forum.xda-developers.com/showthread.php?t=1129933
Raver added the bootloaders to it so you can install other Froyo ROMs afterward.
ICBINB rom series KH2
debloated
a few apps
ext4 optimizations
buttery smooth tweaks
blah bla blah
same thing for all GB builds icbinb INSTALL
disable voodoo
flash rom
boot up
busybox
enable voodoo
bam
if the market disappears and what not just do a factory reset and wipe, you'll also notice that the market will update itself to the new market
enjoy: http://www.megaupload.com/?d=76QYJRJB
THANKS:
krylon for the leak
drhonk for the kernel
whitehawkx for the build and crt ON and OFF anim
ACID for the stock tweaked rom
Curses, Whitehawkx's just finished downloading lol.
Downloading this now, thanks as always!
Does it wipe my settings? When I went from v1 to v2 it wiped all my settings. Or can I just flash it over and still have my settings?
Eric-1987 said:
Does it wipe my settings? When I went from v1 to v2 it wiped all my settings. Or can I just flash it over and still have my settings?
Click to expand...
Click to collapse
you can go into cwm and back up your stuff
after you flash you can restore
other then that yes it will wipe your settings
Thanks for this man, about to flash.
crackpot said:
Curses, Whitehawkx's just finished downloading lol.
Downloading this now, thanks as always!
Click to expand...
Click to collapse
same but i was having that market issue so may as well flash some buttery smooth stuff instead!
Does this use the custom startup/shutdown animations from the KH1 version?
crackpot said:
Does this use the custom startup/shutdown animations from the KH1 version?
Click to expand...
Click to collapse
If your talking about the shut down sound then no it wont be, maybe on a v2 or you could ask htaak if he can release it to the public
Sent from my SGH-T959V using XDA Premium App
gratz... on another good stock build well teaked stock u know what i mean
dsexton702 said:
If your talking about the shut down sound then no it wont be, maybe on a v2 or you could ask htaak if he can release it to the public
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Oh right, forgot I used the GS2 startup animation/sound. Thanks!
been waiting on thiss,thanks
is sgs tool work with kh2
Sent from my SGH-T959V using XDA App
Thanks bro for another sweet release I'll make sure to hit the thanks button when i get home to my laptop.
Did you include the kh2 fugu tweaks ?
Sent from my SGH-T959V using XDA Premium App
steeleain said:
Thanks bro for another sweet release I'll make sure to hit the thanks button when i get home to my laptop.
Did you include the kh2 fugu tweaks ?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
The kh2 fugu tweaks come from the kh2 ROM
Sent from my SGH-T959V using XDA Premium App
I just got whitehawk's deodexed kh2 installed and ext4 working and I'm very happy. I hope you're not saying I have to go all the way back to froyo ICBINB and the whole routine of disabling and enabling voodoo lagfix and praying to the ***** goddess to do it right. I've run out of chickens to sacrifice to her.
Is there anything in this build that can't be just installed on top of what I've got? Like just copying the init.d file out of the build? I've got quadrant scores of 2500 now and I don't want to go back to 1750s with froyo.
The only thing I'm hung up on is how to get Touchwiz 4.5 installed. Everything else seems to work fine. I used to be able to just install it with root explorer but that doesn't seem to work anymore.
nazcalito said:
I just got whitehawk's deodexed kh2 installed and ext4 working and I'm very happy. Would I have to go through the same routine of disabling and enabling voodoo lagfix and praying to the ***** goddess to do it right? I've run out of chickens to sacrifice to her.
If I have to go through the ceremony again, is there anything in this build that can't be just installed on top of what I've got? Like just copying the init.d file out of the build? I've got quadrant scores of 2500 now and I don't want to go back to 1750s with froyo.
The only thing I'm hung up on is how to get Touchwiz 4.5 installed. Everything else seems to work fine. I used to be able to just install it with root explorer but that doesn't seem to work anymore.
Click to expand...
Click to collapse
take your zip file put navigate in it in 7z or win rar
take your tw apk file and copy it to the system app folder and delete your touch wiz2.3.3 or whatever it is if u dont want it just flash overrrrr your rom bambo
Runs flawlessly, incredible work, as always!
Sent from my SGH-T959V using XDA Premium App
Download limit exceeded...Ne1 put up a new link?
Tekken Lord said:
Download limit exceeded...Ne1 put up a new link?
Click to expand...
Click to collapse
Try this one for now until sexton updates his OP
http://sourceforge.net/projects/teamacid/files/roms/icbinb/ICBINB KH2.zip/download
FBis251 said:
Try this one for now until sexton updates his OP
http://sourceforge.net/projects/teamacid/files/roms/icbinb/ICBINB KH2.zip/download
Click to expand...
Click to collapse
ill update in a few im a little busy at the moment, will move all my to sourceforge i guess lol and make website there with raver
so i finally was abel to flash gb octane 3.0 no ciq edition and was wondering if i should stay with the kernel that comes with it or are there better ones out there any recommendations
Just hang tight with what you have in Octaine. It has the latest released kernal from bhundven. And raver will release the tricked out version soon. Unless you want to flash vahalla black edition which I believe I read has an unreleased kernal from bhundven. Both fantastic roms.
Sent from my SGH-T959V
ext4
Ok can I get ext4 on this rom
You have ext 4 if you are on Octaine.
Sent from my SGH-T959V
Ok thanks any more mods I can put on this mod to make it smoother
chemo420 said:
Ok thanks any more mods I can put on this mod to make it smoother
Click to expand...
Click to collapse
if you use any of the mods it will prob mess up the mods that are already built into the rom. But if you want to go down that road go ahead, but don't complain when it starts actting funny, or messes up n u have to wipe n reflash.
Edit: the themes n the themes n apps section are fine tho, n wont mess anything up.
Sent from my SGH-T959V using XDA Premium App
ptaylor09 said:
if you use any of the mods it will prob mess up the mods that are already built into the rom. But if you want to go down that road go ahead, but don't complain when it starts acting funny, or messes up n u have to wipe n reflash.
Edit: the themes n the themes n apps section are fine tho, n wont mess anything up.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
What????
"Ok thanks any more mods I can put on this mod to make it smoother"
Make a back up and try whatever you want. I tried several on Octaine. Nothing messed up. But Raver modded the hell out of the rom itself. There is a modded camera.apk and Modded media_profiles.xml that I use and prefer. There is an updated market that I don't believe is in that version of Octaine. Version 3.4.4. You have Lightning Zap Tweak you can try. Adrenaline Shotv12. ThunderBolt! v2.3.2
BACK UP YOUR ROM and play around.
Sent from my SGH-T959V
ok thank one more thing is the rainbow screen on boot norma
l for this rom
chemo420 said:
ok thank one more thing is the rainbow screen on boot norma
l for this rom
Click to expand...
Click to collapse
Normal? No, that would indicate you have the wrong boot loaders.
Uhhhh. No. You're on octaine?
Sent from my SGH-T959V
Oh crap how do I fix that
chemo420 said:
Oh crap how do I fix that
Click to expand...
Click to collapse
I would try Bhundven's [Heimdall][One-Click][UVKJ6] The KJ6 Heimdall One-Click Collection [12/11/2011] and use the "Fully Back-To-Stock UVKJ6" one. That will put you on stock 2.3.6 with the right boot loaders. After that, re-flash the Octane kernel.
I can't remember if Octane has voodoo or not; you'd have to go into recovery and see if you have CWM or standard 3E recovery.
I had whitehawkx kd1 nd odined Bali kernel with cwm because I couldnt get it to work the other way then I flashed octane then when I try to get into recovery mode I get the rainbow screen
chemo420 said:
I had whitehawkx kd1 nd odined Bali kernel with cwm because I couldnt get it to work the other way then I flashed octane then when I try to get into recovery mode I get the rainbow screen
Click to expand...
Click to collapse
KD1 & Bali are both Froyo ROMs. Octane is a Gingerbread (GB) ROM which requires different boot loaders. You would need to install a ROM that has the correct GB boot loaders to get rid of the rainbow screen. The one-click I mentioned has them
Im goin to give it a try thanx ive had issues trying to get cwm on GB do