Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance
SOLVED
How to fix - Do the staple trick that I did IF you pryed your lock button open. There are contacts which aren't visible unless you open your phone up. Put a staple lightly but directly into the slot without touching the contacts for you camera or any other components. A light touch will trigger it and the power button should create a electrical circuit for a second and my phone turned on!
Hey guys,
New to the forum members but not new in experience as this site is a great help :victory: (not sarcasm)
YES I WATCHED THE NOOB VIDEO - found another thread which said "Use a little screw driver move black tape and you'll see little lines touch the with screw drive should turn on"
Link to another thread I found but didn't help - http://forum.xda-developers.com/showthread.php?t=1621940
(MY PHONE WAS OFF AT THE TIME) Right.. so I dropped my phone on Monday and probably fell on top of the lock button when there's a case (yeah I know.. weird right) So I couldn't turn it on and had to take the backplate off and with staples on the bus (I looked like an idiot) but voila! it turned on. But when I reached home I pryed out the lock button as I dented it too much and now it's broken and the lock button mechanism is broken (the little cube with the clicky button)... I installed an app when I got home to use the proximity sensor to lock and unlock the phone (TAP TAP APP) *Free*
-TODAY- I woke up a while ago, and called a number I didn't know but called me.. so just as I got off the call I needed to end the call but the screen kept waking and not waking but he could of ended it but was stupid enough not to darn telecom marketers.. so I waved my hand to unlock it but then the black screen just stayed there and I took out the battery.. (stupid I know but I didn't want my minutes to go).
Thank you guys much appreciated if I get this done today. IT IS A ROOTED PHONE BY THE WAY!
Fixes i've tried - Plugging into a computer
Taking out the battery whilst it's charging and placing it back in
Placing the battery in, charging it, taking it off charge and charging it again
Hi, I just purchased a brand new Ulephone P6 and noticed that the screen occasionally becomes unresponsive. I can press the power button but not anything else. The only solution I've found is to remove the battery and power it back on. This is a completely retarded fix for a brand new phone; dose anyone know of a solution?
default_user000 said:
Hi, I just purchased a brand new Ulephone P6 and noticed that the screen occasionally becomes unresponsive. I can press the power button but not anything else. The only solution I've found is to remove the battery and power it back on. This is a completely retarded fix for a brand new phone; dose anyone know of a solution?
Click to expand...
Click to collapse
it is the touchscreen's problem,you have to replace the screen.sir.
Well, I am not about to replace the digitizer for a brand new phone; but I did find an easier fix than pulling the battery out.
A few things I should have mentioned.
1) The unresponsive screen only occurs when the screen is activated via opening the flip case (gesture sensing)
2) I am using a GO Locker app but I haven't ruled out whether or not the unresponsive screen also occurs with the stock lock screen
Anyway, I just press the power button off and back on and the screen is responsive again.
Weird but it works for now; it is either something to do with the gesture sensing activation of the screen or the GO Locker app or maybe even a combination of the two together. If anyone has run into this problem let me know thanks. :good:
I apologize in advance if this has been posted before, but i have had a look around and cannot see anyone else with the same problem.
I also apologize if I this is not the correct format, this is my first post here :X
My brother brought my phone to me last week with a problem with his screen (shown is this YouTube video at the start: (this is the link following the youtube.com/ part) watch?v=4pks4idq4YI ). I fixed this by hard resetting the phone and it was fine for about a week. Today, he brought it to me and the screen was like this: (this is the bit following the imgur.com part ) /MK6eJdD . The screen reacts and changes slightly to touch, and the power button turns the screen on and off. If i press and hold the power the phone turns off and vibrates (like normal, just without the choice saying power off etc.). When turned on (by holding the power button) the screen instantly returns to how it was before it was turned off, just a different shape/pattern of the stuff on the screen.
I would like to know if i need to replace the USB flex cable to fix the problem. I am fairly confident that i can do this, (as i am doing DT and electronics for GCSE), and so, if possible, I would also like to know where i should buy an official one (if this is indeed the problem). I am in the UK if that helps with the decision .
Thank you in advance,
G
Hey guys,
strange and frustrating problem. I was using my phone pretty extensively today (although nothing crazy), mostly thanks to Pokemon Go. Tonight after using my phone normally, I went to press the power button to turn the screen off and nothing happened. I was able to reboot (by changing one of the long-press actions to bring up the power menu via GravityBox) and then was unable to power on the phone. It seems like my hardware power button has suddenly become unresponsive. This leaves me unable to power on/off the phone, including booting into the bootloader. Also, I seem to be unable to wake my phone up by double tapping the screen or swiping up.
The phone otherwise functions fine. If I get a notification, the screen wakes up and I can use the phone. Otherwise, the only way I've been able to get into the phone is by connecting it to a computer and issuing ADB commands. The IR blaster functions fine which makes me think it's not the hardware button?
Has this happened to anyone else before? Can the power button just break like that without any water / physical damage? The fact that I also can't wake the screen makes me think it's a software issue. One other thing I suspect is that my phone abruptly died yesterday (battery died despite software thinking it still had juice left). In the past, with the modified kernel / rom, this has resulted in some nasty issues, including 4G not working and the Android system process basically exploding. I thought I lucked out when I powered it on after that, but maybe it just took a day for this issue to manifest itself.
I'm going to make a NANDROID backup and try flashing a few different things to see if I can fix it. I'll post my progress here.
Current build:
- Verizon M8, S-OFF
- TWRP
- Android GPE 6.0 (MRA58K.H13)
Edit: I haven't been able to find a fix. I'm a bit afraid to try a full RUU since I can't use the hardware keys to reboot into the bootloader should something go wrong. It may just be that my PWR hardware button is f'd which really sucks. I'm not sure I'm up to cracking open the phone to fix it. In the meantime I downloaded an app called Gravity Screen On/Off which uses the phone's proximity sensor to wake the screen up and it seems to work ok for now.