This is hex edited by me, stock HTC kernel 2.6.35.13-gc35910f from HTC ROM 2.08.401.1 Android 2.3.5 Sense 3.5 for Sensation with enabled 1.5 GHz CPU frequency on Sensation and OC'ed GPU.
Not tested yet on Sensation XE.
Tested only with stock HTC Android 2.3.4 Sense 3.0 and Android 2.3.5 Sense 3.5 ROMs.
Features:
1.5 GHZ CPU frequency enabled on Sensation.
CPU frequencies and power management identical with Sensation XE.
30% faster than stock on Sensation.
GPU overclocked to 227 MHz in 2D mode and to 300 MHz or 320 MHz in 3D mode.
Installation:
This is flashable zip intended for install from recovery.
I used koush AnyKernel installer, so you can flash this kernel on any ROM.
Remember to do backup before flashing, especially boot partition.
Download:
Sensation and Sensation XE kernels 2.6.35.13-gc35910f:
CPU 1.5 GHz, GPU 3D 320 MHz, GPU 2D 227 MHz md5sum: 6908e27ca055d47040e9d1743e593b67
CPU 1.5 GHz, GPU 3D 300 MHz, GPU 2D 227 MHz md5sum: 419e09e5b13f9a19685cc2e3a61ed6f4
Sensation and Sensation XE kernel 2.6.35.13-gbf6688c especially for CoreDroid Sense 3.5 ROM:
CPU 1.5 GHz md5sum: fc427bfd01a9bc448414ca5e40a0f900
HTC ICS Android 2.3.5, CPU 1.5 GHz, GPU 3D 320 MHz, GPU 2D 227 MHz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you don't know which kernel to choose, see Download section.
Great news, thanks Sebastian
Awesome. thank you very much!
Sent from HTC Sensation Coredroid
Let the action begin...Cool!
Ah great work SFM!!
I was wondering when you were going to do the same thing for the 2.3.5 stock kernel.
Overclocked and a fully functional camera on 2.3.5 / 3.5 (Burst & HDR of course)...
A first! Congrats!
All Devs start to update ROMs in 3...2...1
Great job!!
i suppose this is the improved version of your previous kernel 1.5ghz, with improvement mainly on GPU right? btw, why there are 2 type (300mhz and 320mhz), does it have disadvantages on 320mhz?
This one been compiled as has Sebastianfm in kernel info, not htc. As for ics version f**king good work
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Thanks. Way to go!
richmondo said:
This one been compiled as has Sebastianfm in kernel info, not htc. As for ics version f**king good work
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
It is only hex edited by me.
x3nophobia said:
i suppose this is the improved version of your previous kernel 1.5ghz, with improvement mainly on GPU right? btw, why there are 2 type (300mhz and 320mhz), does it have disadvantages on 320mhz?
Click to expand...
Click to collapse
No, everything is listed in OP.
For me GPU in 3D mode works properly on 320 MHz, but I read somewhere that this frequency can be unstable on some devices.
Thanks very much SebastianFM!
Kernel works nice on Senseay XE35! CF Bench overall 6585 after a short period of working with this kernel.
No issues so far, very smooth and noticeable faster.
What's remarkable is that the phone is getting less warm then with the custom kernels I normally use.
Sorry to ask. Whats the diff between both zips? Im on Sergios coredroid v3
bx10r said:
Sorry to ask. Whats the diff between both zips? Im on Sergios coredroid v3
Click to expand...
Click to collapse
GPU frequency.
SebastianFM said:
GPU frequency.
Click to expand...
Click to collapse
Again sorry...so which would I use?
Is the call recording patch in these kernels?
Sent from my HTC Sensation 4G using XDA App
bx10r said:
Again sorry...so which would I use?
Click to expand...
Click to collapse
you can use whichever one you want. if the 320 becomes unstable then switch to 300. i personally think 300 is more than enough.
@sebastian, does this kernel allow the use of a cpu controller app like system tuner? also, is there a difference between this and tinkys stock kernel thread?
walkinhotdog said:
@sebastian, does this kernel allow the use of a cpu controller app like system tuner? also, is there a difference between this and tinkys stock kernel thread?
Click to expand...
Click to collapse
I can't check this because I have ICS installed.
Yes, this is hex edited stock HTC kernel, not compiled from source code.
Awesome : )
Just in case others on the same ROM as me are waiting for feedback, it's working well so far with EnergyROM from 22nd December. Only an hour or so in at the mo.... Using 300 MHz gpu variant.
Thanks for posting that, I'm on energy as well and just found this kernel, will try it tonight.
Hi
Hi we just have noticed when using this Kernel and I open any video on gallery or youtube it just breaks the pixels. Any idea?
I haven't noticed anything like that at all. what Rom are you using, what is your set up?
Related
Trinity for HTC Sensation
Short feature list, less is more, kernel speaks for itself
Based on HTC's CRC LE source
Boots 168/1674 (168MHz - 1890MHz full range currently, may boot 384MHz min, depending on rom)
TUN (Tunneling/VPN support)
CIFS (Samba support)
EXT4 tweaks
VM Tweaks
Goal: Most lean build achievable.
Aims at performance, and envelope will be pushed
Thanks to @RyanMacG for euroskank hosting
Thanks to @cayniarb, saved me a lot of time thanks to initial OC code from Tiamat
Thanks to @RootzWiki for the HTC Sensation 4G to work on!Thanks to @koush for his anykernel script
How to flash:
Make a nandroid
flash the correct kernel for your rom (AOSP/cm7/miui -> "acm", sense3.0-> sense30,)
enjoy
(if on Sense 3.5, you will get a firmware to flash soon)
-------------------------------------------------------------------------------------------
Files @:
DISCONTINUED
SQL in filename == also replaces libsqlite.so
Builds for cm7, miui, Sense 3.0 and Sense 3.5 (GB)
RD in filename == includes optimized ramdisk
-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------
Support Link
-------------------------------------------------------------------------------------------
This is an early build and i see room for improvement in several areas, doesn't mean i am not using it to power my "work phone".
Great alternative to the feature-laden kernels from show-p and Faux, no offense intended, just more streamlined. Not as many bells and whistles like extra governors but its consistent, stable, and benches off the charts - See Here.
Don't want to spam this new topic, but:
Is Sense 3.5 (ARHD 2.3.5) also supported?
168 MHz is really interesting =)
die_braut said:
Don't want to spam this new topic, but:
Is Sense 3.5 (ARHD 2.3.5) also supported?
168 MHz is really interesting =)
Click to expand...
Click to collapse
not yet.
Sent from my Sensation using Tapatalk
Looking forward to trying this out.
Just fresh wiped to try out virtuous sensation.
Sent from my HTC Sensation Z710e using Tapatalk
zimphishmonger said:
Great alternative to the feature-laden kernels from show-p and Faux, no offense intended, just more streamlined. Not as many bells and whistles like extra governors but its consistent, stable, and benches off the charts - See Here.
Click to expand...
Click to collapse
Could I ask what Rom you're using to get that score?
Sent from my HTC Sensation Z710e using Tapatalk
Thanks for the workz.
Welcome Morfic! You're kernels were great for the G2x and I'm glad to see you in the sensation forums. Great work!
Hello Morfic. This is the smoothest and fastest kernel my phone has ever seen. Thanks.
Sent from my HTC Sensation Z710e using Tapatalk
guess i'm gonna be the first G-pig to try it on MIUI rom
edit : just installed and realized header says CM7 2.3.4 but i install kernel over 2.3.7 (miui rom)
so far so good and flying. i can feel how rapid it is report back in a couple of days time on batt life et or any other hiccups
"This is your time- HTC SENSATION....GO ! RUN LIKE NEVER BEFORE !"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
avetny said:
"This is your time- HTC SENSATION....GO ! RUN LIKE NEVER BEFORE !"
Click to expand...
Click to collapse
Lol wats up my man, thats a funny picture haha. I tried the kernel on CM7 and everything is working flawlessley
How fast can run HTC SENSATION??? Ask MORFIC !
eminem5055 said:
Lol wats up my man, thats a funny picture haha. I tried the kernel on CM7 and everything is working flawlessley
Click to expand...
Click to collapse
my brother, imagine.... it's just a first build !!!
THIS IS A NEW EVOLUTIONARY STAGE for your phone !!!
avetny said:
my brother, imagine.... it's just a first build !!!
THIS IS A NEW EVOLUTIONARY STAGE for your phone !!!
Click to expand...
Click to collapse
Haha yea did you see that score on the first page! That was on sense lol!
I didn't changed anything. Don't use any CPU programs. Speed is default speed. Made cf bench , was streaming radio on the backgroynd and charging. Here is the result:
Sent from my HTC Sensation Z710e using Tapatalk
awesam said:
guess i'm gonna be the first G-pig to try it on MIUI rom
edit : just installed and realized header says CM7 2.3.4 but i install kernel over 2.3.7 (miui rom)
so far so good and flying. i can feel how rapid it is report back in a couple of days time on batt life et or any other hiccups
Click to expand...
Click to collapse
Fixed topic, it was misleading. Ported CM usually isn't all that version critical as natives like Nexii.
pardoned said:
Could I ask what Rom you're using to get that score?
Sent from my HTC Sensation Z710e using Tapatalk
Click to expand...
Click to collapse
That bench was done on Bulletproof v1.4 @ 1.89Ghz. Running Sense 3.0 with full homescreens, ~150 apps loaded. No task killers or cheating
Hello,
I have 2 questions:
1. What it`ll happen if you try to install the kernel on sense 3.5(energy)?
2. If i am already on a custom kernel (bricked), do i need to install rom all over again? Or it will work if I flash return to stock ?
Would like to know about #2. Have to return to stock kernel first then apply this kernel?
mishufac said:
Hello,
I have 2 questions:
1. What it`ll happen if you try to install the kernel on sense 3.5(energy)?
2. If i am already on a custom kernel (bricked), do i need to install rom all over again? Or it will work if I flash return to stock ?
Click to expand...
Click to collapse
Confirmation number: 20E06519DM5652013.
I sent your some beers.
Clocked to1.7
Rom:Virtuous sensation
This combo rocks. I never before saw results like those.
Sent from my HTC Sensation Z710e using Tapatalk
This Adreno GPU update is ONLY designed to work on Qualcomm S3 ARM7 Devices running ICS.
Greetings, I have been on XDA for a long time and I hope that you all can benefit from this patch as we have over at the Amaze Forums. Here is a link to my Original Thread and evidence of this patch's success for our Qualcomm S3 Adreno 220 GPU devices running ICS.
We have proven that this driver Patch has doubled our GPU throughput for 2D and 3D rendering.
http://forum.xda-developers.com/showthread.php?t=1631223
I have only tested this on my T-Mobile HTC Amaze (Qualcomm S3 Adreno 220 GPU) and have not experienced any issues.
I have created this Recovery Flashable Patch to Install the Qualcomm Updated Adreno Drivers on the "Official Ruby ICS" release.
Qualcomm Developers Website
I did not get a screenshot of the results before flashing this, however I have seen dramatically improved result on my Quadrant 3D scores with "Force 2D GPU rendering" UNCHECKED in the Setting->Develop Options Menu of this ICS Release. With this option checked I have seen improvements on both 2D and 3D. Although results are slightly degraded for 3D from post update the 2D results have doubled in value.
Quadrant results were obtained immediately after restart to avoid any other processes interfering with the results.
AFTER "Adreno ICS Update" Screenshot 2D Rendering NOT checked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFTER "Adreno ICS Update" Screenshot 2D Rendering CHECKED.
If someone would post a screenshot of the before Quadrant result I would gladly add it to this post. Please only post results Immediately after restart for conformity.
Android Ice Cream Sandwich Required
Root Required
Pre Requisites fulfilled (Root) (ICS)
Install "Adreno ICS Update" to the root of your SD Card
Toggle Signature Verification in Recovery
Install zip via Recovery
Fix Permissions
Reboot
ENJOI!!!
Thank you dhkr234 for the flashable zip framework.
Please post any other tested configurations and I will add them for other community members reference.
The usual warning goes here. I'm not responsible for what you do, or how you execute, use this at your own risk!
Additional Configurations Tested
Additional ROMS with confirmed improvements:
ROMS with these NEW Adreno Drivers Baked in:
So this works on sensation?
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
nope, thread starter post in this place randomly
Sensation = Qualcom 220 = S3
Anyone tried it yet?
coindroid changelog yesterday for 1.5.0 states:
'Updated Adreno GPU binaries.'
so i'm thinking they may be already included.
sjknight413 said:
Anyone tried it yet?
coindroid changelog yesterday for 1.5.0 states:
'Updated Adreno GPU binaries.'
so i'm thinking they may be already included.
Click to expand...
Click to collapse
intriguing hmm...
shiningarmor said:
intriguing hmm...
Click to expand...
Click to collapse
Wrong Quote.
sjknight413 said:
Anyone tried it yet?
coindroid changelog yesterday for 1.5.0 states:
'Updated Adreno GPU binaries.'
so i'm thinking they may be already included.
Click to expand...
Click to collapse
I am not sure if coindroid added these binaries to his ROM. Ask him.
This is for all who have ICS without the binaries pre-baked and would like to add these for performance results.
Thank you,
gjcamp
This seems like the new GL version doesnt it? is it ES GL 2.0 2184622?
Ehi guys this new update worked flawlessly for me.
Before the upgrade I had 2697 (2D 490, 3D 2195) with quadrant, after the update 3608 (2D 495, 3D 2220).
As you can see the improvement is not so incredible in graphics, but CPU has increased from 3231 to 6549 that's incredible! Also MEM increased around 600 points.
I'm running ARHD 6.6.3 XE with Sebastian FM 1.4.1 kernel.
Anyone experienced the same?
Hi,
just tried this out on Leedroids V7.3
But not with quadrant, i used nenamark2.
Without the update
Right after
Sent from my HTC Sensation Z710e using xda premium
ARHD 6.6.3 XE with stock kernel, QUADRANT SCORE
3 TEST with Force 2D GPU rendering unchecked
2D 455--->481(after patch)
3D 2108--->2008(after patch)
2D 472--->481(after patch)
3D 2181--->2325(after patch)
2D 463--->485(after patch)
3D 2154--->2186(after patch)
~equal in 3d but a little better in 2D
So this is just the same files from Qualcom website right?
El Pako87 said:
Ehi guys this new update worked flawlessly for me.
Before the upgrade I had 2697 (2D 490, 3D 2195) with quadrant, after the update 3608 (2D 495, 3D 2220).
As you can see the improvement is not so incredible in graphics, but CPU has increased from 3231 to 6549 that's incredible! Also MEM increased around 600 points.
I'm running ARHD 6.6.3 XE with Sebastian FM 1.4.1 kernel.
Anyone experienced the same?
Click to expand...
Click to collapse
Enable the forced 2D rendering please.
I would bet your 2D performance doubles.
Thank you,
gjcamp
Sent from my HTC_Amaze_4G using xda premium
This patch really give a huge and significant boost
i get 3.8k quadrant score,
before this,I just get 2.4k
Regarding my kernel setting:
Bricked kernel(GPU rendering enabled)
OC 1.8ghz
Zram enabled,
2D max OC,
3D OC disabled
cwk_and said:
This patch really give a huge and significant boost
i get 3.8k quadrant score,
before this,I just get 2.4k
Regarding my kernel setting:
Bricked kernel(GPU rendering enabled)
OC 1.8ghz
Zram enabled,
2D max OC,
3D OC disabled
Click to expand...
Click to collapse
What rom are you running?
sjknight413 said:
What rom are you running?
Click to expand...
Click to collapse
Android revolution HD
How can I toggle signature vertification???also how can I fix permissions???
Sent from my HTC Sensation XE using XDA
also work on ELEGANCIA™ Sense 4 v3.8
Besides,multithread of linpack is also slightly increase
nenamark2 also increase from 43.6fps to 48.6fps
This is not my work "mdeejay" compiled this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
- Based on latest htc source
- Overclocked 1890MHz (default, very stable for all devices) (EXTREME Version: 2106MHz)
- L2 boost 1458MHz
- GPU OC 300/500MHz (2D/3D)
- Buttons backlight power set to 2mA (Looks better)
- Simple I/O Scheduler (default)
- CIFS/TUN
- Tweaked for stable and performance
Download
V06: http://d-h.st/zJN
V09X: http://d-h.st/5Dj
V01S: http://d-h.st/pKR
Modules:
http://d-h.st/vhf
IMPORTANT:
Flash (CWM/TWRP) compatible with this kernel postboot script and thermald.conf for better preformance and battery safe
http://d-h.st/foy (for V01-V06)
http://d-h.st/e6i (eXtreme version)
Only for sense roms based on 1.78 RUU (others not tested)
Flash via fastboot:
HTML:
fastboot flash boot boot_name.img
fastboot erase cache
fastboot reboot
Governors: Ondemand (default), Interactive, Performance, Userspace
I/O Schedulers: Simple (default), Noop, V®, Deadline, CFQ
*For tweak freqs/governors/I/O Schedulers use CPU Master app
Credits/Thanks: Codeaurora for kernel, htc and rootzwiki for this awesome device, showp1984 and others.
All Credits go to "mdeejay"(i've asked his permission for posting the kernel here)
For more info official thread:http://rootzwiki.com/topic/27832-03-julekernel-virtuous-v06-09-extreme-linux-308/
Just to make it easier to spot, you should probably put all the way on top that this isn't your work
odie3 said:
It seems for some reason I can no longer turn on my WiFi from the Enable Manager.
I Check it on and nothing happens... I go back it's unchecked.
Crap... it was working but has decided to stop!
Click to expand...
Click to collapse
Lol true. Mdeejay has done an awesome job though.
Sent using Tapatalk
What is
V06
V09X
V01S
which one i should use
adakaya1994 said:
What is
V06
V09X
V01S
which one i should use
Click to expand...
Click to collapse
The different versions of the kernel.. If you click the link in the OP to take you to mdeejay's post on rootzwiki, you will see a more complete changelog.
My only issue with these kernels is that i can never get the max frequency i want to stick. I've used setcpu and nofrills
Sent from my HTC One S using xda premium
This kernel realy stable (wifi etc) but isnt overclock (cpu gpu) drains so much battery? CPU is ok i can underclock it but what about GPU?
battery drain is heavy. after 13 hours is the battery at 15%. (fb, whatsapp, browser,...)
with lowkernel 1.0.1 at same time 30-40%
Sent from my HTC One S powered by LeeDroid One Supreme
Habarug said:
Just to make it easier to spot, you should probably put all the way on top that this isn't your work
Click to expand...
Click to collapse
Done
Hopie said:
battery drain is heavy. after 13 hours is the battery at 15%. (fb, whatsapp, browser,...)
with lowkernel 1.0.1 at same time 30-40%
Sent from my HTC One S powered by LeeDroid One Supreme
Click to expand...
Click to collapse
Have you flashed the postboot scripts?
----------------------------------------------------------------------
Don't use SetCPU use CPUMaster it's from the same who developed antutu benchmark works better
phoenixita said:
Have you flashed the postboot scripts?
Click to expand...
Click to collapse
yes..
Hopie said:
battery drain is heavy. after 13 hours is the battery at 15%. (fb, whatsapp, browser,...)
with lowkernel 1.0.1 at same time 30-40%
Sent from my HTC One S powered by LeeDroid One Supreme
Click to expand...
Click to collapse
Use v06 and flash the post boot Script. No need to actually over clock with this kernel beast and still getting great battery life. 24 hours easily with 4 hours of screen time.
Sent from my HTC VLE_U using xda premium
i flashed the extreme kernel (i think, this is the newest) modules and extrem script, but i don´t overclock min:192 max: 15xx
~6 hours: 192mhz
~6 hours deep sleep
reflash lowkernel and wait the battery drain
somebody tested the normal kernel with 2.21 RUU?
NOTE: After installing on Stock 2.21 RUU with newest radio causes black screen on reboot.
the boot script link isn't working. can some post a working link.
stunner2002 said:
somebody tested the normal kernel with 2.21 RUU?
NOTE: After installing on Stock 2.21 RUU with newest radio causes black screen on reboot.
Click to expand...
Click to collapse
U need to flash the boot_script to get it booting
Sent from my HTC One S using xda app-developers app
Does anyone have the flash able version through twrp rather than using fastboot. I'm not near a computer and like to give v06 a try right quick. Thanks in advance
Sent from my HTC VLE_U using xda premium
Would this work on miui?
Sent from my HTC One S using Tapatalk 2
dsellers2 said:
Does anyone have the flash able version through twrp rather than using fastboot. I'm not near a computer and like to give v06 a try right quick. Thanks in advance
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Here ya go. They are from the dev for Axiom, so not sure if it works on other roms, but i would think so.
http://goo.im/devs/itsmikeramsay/Kernels
---------- Post added at 04:21 PM ---------- Previous post was at 04:20 PM ----------
Taco991 said:
Would this work on miui?
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
no, thats an AOSP rom not sense. there arent really too many options when talking kernels and AOSP unfortunately.
Taco991 said:
Would this work on miui?
Click to expand...
Click to collapse
frettfreak said:
no, thats an AOSP rom not sense. there arent really too many options when talking kernels and AOSP unfortunately.
Click to expand...
Click to collapse
Works fine on the Sense based Miui.
[KERNEL] [ANDROID 4.3-5.1] LeanKernel: Minimalistic Kernel [V5.3, (4/17/15)]
ALL CREDITS GO TO IMOSEYON FOR HIS AWESOME KERNEL FOR THE NEXUS 7 THIS IS POSTED STRAIGHT FROM THIS THREAD AT ROOTZWIKI LINK: http://rootzwiki.com/topic/35483-kerneljbbeta-leankernel-minimalistic-kernel-v02beta-102012/
===================================================
Sources: https://github.com/imoseyon/leanKernel-grouper
Notice: Versions 0.6+ are only for android 4.2 based roms
Notice 2: Version 2.0+ are only for android 4.3 based roms
Notice 3: Version 3.0+ are only for android 4.4 based roms
Notice 4: Version 5.0+ are only for android 5.0 based roms
LATEST VERSION: 5.3 will work on 5.1 ROMs
FEATURES:
Unnecessary kernel components removed to make kernel lean and fast!
OC'ed to 1.5Ghz. At boot cpu slots are limited between 204mhz and 1.3Ghz for stability. Use your favorite app to OC or UC.
Ramdisk tweaks (sysctl, vm, etc.)
init.d support
Tons of patches backported from Linux 3.2.
SWAP and ZRAM supported. Use built-in script: "zram enable" or "zram disable"
ROW and tuned Deadline i/o schedulers
Compiled using latest linaro toolchain and optimizations.
USB Audio support
USB charging high current mode enabled at all times
"lkflash" script to flash latest leanKernel releases. (Open Terminal, su, and then type lkflash).
DOWNLOADS:
ALL VERSIONS
CHANGELOG:
Up to date changelog(s) new: https://github.com/imoseyon/leanKernel-grouper/wiki/Lollipop-ChangeLog
i really like the fact you asked for permission to post this here on xda..many times people dismiss that some dev disagree with the fact of distribute a kernel in all the place (for example like did ezeekeel on gnex etc..).now to the kernel,used it the day it came out and all i can say is that it's smooth and gave me very long battery time...reccomended to everyone also if it's in initial stage|!:good:
Will this support CM10?
Sent from my Nexus 7 using xda app-developers app
can i uv on this?
Syphen5 said:
Will this support CM10?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It should...
bervin said:
can i uv on this?
Click to expand...
Click to collapse
Not yet. Do you think UV really helps on nexus 7?
Imoseyon said:
It should...
Not yet. Do you think UV really helps on nexus 7?
Click to expand...
Click to collapse
I UV by -100mv on my nexus 7 on Franco kernel and I do see a little extension of my battery. In your opinion it doesn't help?
Nice kernel, needs a little work as far as flash goes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good! i also try this kernel, so far so good!
azoller1 said:
ALL CREDITS GO TO IMOSEYON FOR HIS AWESOME KERNEL FOR THE NEXUS 7 THIS IS POSTED STRAIGHT FROM THIS THREAD AT ROOTZWIKI LINK: http://rootzwiki.com/topic/35483-kerneljbbeta-leankernel-minimalistic-kernel-v02beta-102012/
===================================================
Sources: https://github.com/imoseyon/leanKernel-grouper
FEATURES
Unnecessary kernel components removed to make kernel lean and fast!
OC'ed to 1.5Ghz. At boot cpu slots are limited between 204mhz and 1.3Ghz for stability. Use your favorite app to OC or UC.
Ramdisk tweaks (sysctl, vm, etc.)
init.d support
Tons of patches backported from Linux 3.2.
SWAP and ZRAM supported. Use built-in script: "zram enable" or "zram disable"
SIO i/o scheduler
Compiled using latest linaro toolchain and optimizations.
USB Audio support
That's it for now (but more to come), leanKernel is not right for you if you want lots of fancy features.
FAQ
DOWNLOADS
V0.2Beta- http://encounterandroid.com/imoseyon/grouper/beta/lk_nexus7_jb-v0.2beta.zip
CHANGELOG
v0.2 10/20/12 (1a868bbff4b537f9407bb17b754786c8) - initial beta release
Click to expand...
Click to collapse
I am going to post this in my kernel thread if you don't mind
Sent from my Nexus 7 using Tapatalk 2
ncvikingx97 said:
I am going to post this in my kernel thread if you don't mind
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
This isn't my kernel you might wanna ask the dev. From the rootzwiki website at top of op but I'm sure your fine
Sent from my stock LG Spectrum Using LTE 4G on Verizon
Is anyone having problems with the kernel?
Sent from my stock LG Spectrum Using LTE 4G on Verizon
azoller1 said:
Is anyone having problems with the kernel?
Sent from my stock LG Spectrum Using LTE 4G on Verizon
Click to expand...
Click to collapse
nope. it runs smooth here.
Holy s#$t!! We have a Lean Kernel for the Nexus 7! Is there going to be a Leantweaks script to go along with this? I have been using Lean on my Sprint and unlocked GSM Galaxy Nexus running 920 max and I can't even tell its underclocked. I am also able to run 230 or even 180 minimum so I can't wait to see where this goes! Many thanks Imoseyon
Sent from my Nexus 7 using Xparent SkyBlue Tapatalk 2
just flashed this kernel and will give it a try..
one thing i noticed though..
while in first boot after flashing, "No-frills CPU Control" reported a max 1.5 GHz and min 204 MHz (which should be max 1.3 GHz as i read from the thread by the kernel developer)..
and after some time (without reboot), it reported max 700 MHz and min 204 MHz..
is this a kernel problem and "No-frills CPU Control" problem?
iamelton said:
just flashed this kernel and will give it a try..
one thing i noticed though..
while in first boot after flashing, "No-frills CPU Control" reported a max 1.5 GHz and min 204 MHz (which should be max 1.3 GHz as i read from the thread by the kernel developer)..
and after some time (without reboot), it reported max 700 MHz and min 204 MHz..
is this a kernel problem and "No-frills CPU Control" problem?
Click to expand...
Click to collapse
Yeah I have also been having problems with no frills CPU control it doesnt always say the correct CPU speeds I'll check to see if it's a kernel problem
Sent from my stock LG Spectrum Using LTE 4G on Verizon
System tuner is recommended for CPU control
Sent from my stock LG Spectrum Using LTE 4G on Verizon
Updated:
v0.3 10/28/12
-Added High Current Mode for USB Charging
-Work queue code backported from mainline linux
-Even Leaner
Wanted to check and see if this kernel worked on aokp as well as cm?
Sent from my aokp'd n7
It should work on both as I have tried it on both with no problems
Sent from my Nexus 7 using Tapatalk 2
is on 0.3 and so far so good..
runs smoothly and battery consumption is quite impressive..
Hello guys, just a compilation of my current setup. For someone who wants performance, battery life, and customisability with a good looking ui (debatable on ui, personal taste tbh)
Not chasing for the latest feautures, latest rom, this rom is for someone to just settle down with. This is what I use and i'm satisfied
Feautures:
Google NOW
MIUI ICS
MIUI Control app
Sultan kernel default
Mobile Bravia Engine 2
Android 4.2 Jellybean swipe keyboard
Screenshots of UI:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions [IMPORTANT! SPECIFIC!]:
Download ROM, Sultan Kernel Aroma Settings, Enable ROOT (If you want it)
Install ROM
After the main ROM installation, Sultan kernel will be preinstalled, however to configure settings according to whether you prefer Performance for gaming or Battery Life, You need to run Sultan Kernel Aroma STRAIGHT AFTER, NO REBOOT
IF YOU WANT ROOT, INSTALL ENABLE ROOT STRAIGHT AFTER INSTALLATION, NO REBOOT TO AVOID lbeguard FC! If you later decide to enable ROOT, flash and reboot, you will get FORCE CLOSE, BUT, keep closing the notification and CLEAR DATA of LBEGUARD FROM SETTINGS AND WILL STOP, THEN YOU WILL HAVE ROOT
Reboot
Downloads:
ROM
Sultan Kernel Aroma Setup
ENABLE ROOT
Play Store APK
Donate Link
Credits:
MIUI Team
Author of Sultan Kernel
And all the devs that contributed to rooting and unlocking the bootloader of htc sensation
My Setup For Sultan Kernel:
mpdecision Enabled
Sweep2Wake Disabled
ondemand
Balance Plus
Same CPU Freq for both cores
CPU Freq: 1566MHz
Min CPU Freq: 192MHz
Second Phase Freq: 972MHz
Screen off freq: 594MHz
2D GPU Freq: 200MHz
3D GPU Freq: 300MHz
No ZRAM OR Softswap
SIO
readhead buffer 128kb
RAM MinFree Value: Optimal II
LogCat Disabled
LED Infinite
Vsync: Yes
USB Fastcharge: No
KSM: No
Undervolt: -25 mV
Button Backlight Brightness: Normal
MIUI Launcher Setup:
Transition Effect: Cascading
Wallpaper scroll type: Centre
Grid Layout: 4x5
Keep in memory: Yes
Icon Shadow: No
looks amazing! but just one question, does it have wifi calling?
sweet another rom for our Sensation.
downloading now
eh.. waiting for uploading
To be frank this will be the first MIUI that caught my attention.
I will try it once my internet recovered. Currently using phone data, quite slow and disturbing.
Again, thanks for your effort.
do you have another mirrors?http://d-h.st is better. because i have difficulty in downloading
minu rom is really good. What I don't like is the integration of miui account and other non-google stuff.
rdmay20 said:
looks amazing! but just one question, does it have wifi calling?
Click to expand...
Click to collapse
I'm in the UK so didn't realise, I'll have an add on up soon
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
sonny210183 said:
do you have another mirrors?http://d-h.st is better. because i have difficulty in downloading
Click to expand...
Click to collapse
I use drop box but it requires me to download the client to upload larger than 300mb which is crap. I'll find another host when I get home
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
KiD3991 said:
To be frank this will be the first MIUI that caught my attention.
I will try it once my internet recovered. Currently using phone data, quite slow and disturbing.
Again, thanks for your effort.
Click to expand...
Click to collapse
already downloaded it, wait for review hope it gonna blast
webstar1 said:
I use drop box but it requires me to download the client to upload larger than 300mb which is crap. I'll find another host when I get home
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
most roms i downloaded from d-h.st,it can be greater than 300 mb
can't download from your host, wasted time
any other host for a download link? cant complete downloading your rom from your posted link....
webstar1 said:
I'm in the UK so didn't realise, I'll have an add on up soon
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
ah thank you, cant wait!
squall_20042001 said:
can't download from your host, wasted time
Click to expand...
Click to collapse
Care to be grateful ? It's not even his fault that devhost is misbehaving. You should be grateful.
Hello this is a ics rom based on android 4.0.3 / 3.2.22.
Why not upgrade this to current rom V5 Jelly Bean and could you update the control panel to work with version V5 miui.
r.king35 said:
Hello this is a ics rom based on android 4.0.3 / 3.2.22.
Why not upgrade this to current rom V5 Jelly Bean and could you update the control panel to work with version V5 miui.
Click to expand...
Click to collapse
Please read the original post. This ROM isn't for the latest stuff, but rather the most stable and efficient. MIUI V5 still has some issues and kills the battery quite quickly.
Sent from my HTC Sensation using XDA Premium HD
anyone has a mirror for this download? original link not working for me
Sent from my HTC Sensation using xda premium
skadoosh said:
anyone has a mirror for this download? original link not working for me
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Same , Anyone please care to post another link ?
Does wifi work in all countries or needs wifix?