Database Info

[KERNEL] Overclocked Sensation and Sensation XE HTC stock kernel for HTC GB ROMs

This is hex edited by me, stock HTC kernel 2.6.35.13-gc35910f from HTC ROM 2.08.401.1 Android 2.3.5 Sense 3.5 for Sensation with enabled 1.5 GHz CPU frequency on Sensation and OC'ed GPU.​
Not tested yet on Sensation XE.
Tested only with stock HTC Android 2.3.4 Sense 3.0 and Android 2.3.5 Sense 3.5 ROMs.
Features:
1.5 GHZ CPU frequency enabled on Sensation.
CPU frequencies and power management identical with Sensation XE.
30% faster than stock on Sensation.
GPU overclocked to 227 MHz in 2D mode and to 300 MHz or 320 MHz in 3D mode.
Installation:
This is flashable zip intended for install from recovery.
I used koush AnyKernel installer, so you can flash this kernel on any ROM.
Remember to do backup before flashing, especially boot partition.
Download:
Sensation and Sensation XE kernels 2.6.35.13-gc35910f:
CPU 1.5 GHz, GPU 3D 320 MHz, GPU 2D 227 MHz md5sum: 6908e27ca055d47040e9d1743e593b67
CPU 1.5 GHz, GPU 3D 300 MHz, GPU 2D 227 MHz md5sum: 419e09e5b13f9a19685cc2e3a61ed6f4
Sensation and Sensation XE kernel 2.6.35.13-gbf6688c especially for CoreDroid Sense 3.5 ROM:
CPU 1.5 GHz md5sum: fc427bfd01a9bc448414ca5e40a0f900
HTC ICS Android 2.3.5, CPU 1.5 GHz, GPU 3D 320 MHz, GPU 2D 227 MHz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you don't know which kernel to choose, see Download section.

Great news, thanks Sebastian

Awesome. thank you very much!
Sent from HTC Sensation Coredroid

Let the action begin...Cool!

Ah great work SFM!!
I was wondering when you were going to do the same thing for the 2.3.5 stock kernel.
Overclocked and a fully functional camera on 2.3.5 / 3.5 (Burst & HDR of course)...
A first! Congrats!
All Devs start to update ROMs in 3...2...1
Great job!!

i suppose this is the improved version of your previous kernel 1.5ghz, with improvement mainly on GPU right? btw, why there are 2 type (300mhz and 320mhz), does it have disadvantages on 320mhz?

This one been compiled as has Sebastianfm in kernel info, not htc. As for ics version f**king good work
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium

Thanks. Way to go!

richmondo said:
This one been compiled as has Sebastianfm in kernel info, not htc. As for ics version f**king good work
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
It is only hex edited by me.
x3nophobia said:
i suppose this is the improved version of your previous kernel 1.5ghz, with improvement mainly on GPU right? btw, why there are 2 type (300mhz and 320mhz), does it have disadvantages on 320mhz?
Click to expand...
Click to collapse
No, everything is listed in OP.
For me GPU in 3D mode works properly on 320 MHz, but I read somewhere that this frequency can be unstable on some devices.

Thanks very much SebastianFM!
Kernel works nice on Senseay XE35! CF Bench overall 6585 after a short period of working with this kernel.
No issues so far, very smooth and noticeable faster.
What's remarkable is that the phone is getting less warm then with the custom kernels I normally use.

Sorry to ask. Whats the diff between both zips? Im on Sergios coredroid v3

bx10r said:
Sorry to ask. Whats the diff between both zips? Im on Sergios coredroid v3
Click to expand...
Click to collapse
GPU frequency.

SebastianFM said:
GPU frequency.
Click to expand...
Click to collapse
Again sorry...so which would I use?

Is the call recording patch in these kernels?
Sent from my HTC Sensation 4G using XDA App

bx10r said:
Again sorry...so which would I use?
Click to expand...
Click to collapse
you can use whichever one you want. if the 320 becomes unstable then switch to 300. i personally think 300 is more than enough.
@sebastian, does this kernel allow the use of a cpu controller app like system tuner? also, is there a difference between this and tinkys stock kernel thread?

walkinhotdog said:
@sebastian, does this kernel allow the use of a cpu controller app like system tuner? also, is there a difference between this and tinkys stock kernel thread?
Click to expand...
Click to collapse
I can't check this because I have ICS installed.
Yes, this is hex edited stock HTC kernel, not compiled from source code.

Awesome : )
Just in case others on the same ROM as me are waiting for feedback, it's working well so far with EnergyROM from 22nd December. Only an hour or so in at the mo.... Using 300 MHz gpu variant.

Thanks for posting that, I'm on energy as well and just found this kernel, will try it tonight.

Hi
Hi we just have noticed when using this Kernel and I open any video on gallery or youtube it just breaks the pixels. Any idea?

I haven't noticed anything like that at all. what Rom are you using, what is your set up?

[Driver] Qualcomm S3 Adreno 220 GPU ICS Flashable Update {UnSigned}

This Adreno GPU update is ONLY designed to work on Qualcomm S3 ARM7 Devices running ICS.
Greetings, I have been on XDA for a long time and I hope that you all can benefit from this patch as we have over at the Amaze Forums. Here is a link to my Original Thread and evidence of this patch's success for our Qualcomm S3 Adreno 220 GPU devices running ICS.
We have proven that this driver Patch has doubled our GPU throughput for 2D and 3D rendering.
http://forum.xda-developers.com/showthread.php?t=1631223
I have only tested this on my T-Mobile HTC Amaze (Qualcomm S3 Adreno 220 GPU) and have not experienced any issues.
I have created this Recovery Flashable Patch to Install the Qualcomm Updated Adreno Drivers on the "Official Ruby ICS" release.
Qualcomm Developers Website
I did not get a screenshot of the results before flashing this, however I have seen dramatically improved result on my Quadrant 3D scores with "Force 2D GPU rendering" UNCHECKED in the Setting->Develop Options Menu of this ICS Release. With this option checked I have seen improvements on both 2D and 3D. Although results are slightly degraded for 3D from post update the 2D results have doubled in value.
Quadrant results were obtained immediately after restart to avoid any other processes interfering with the results.
AFTER "Adreno ICS Update" Screenshot 2D Rendering NOT checked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFTER "Adreno ICS Update" Screenshot 2D Rendering CHECKED.
If someone would post a screenshot of the before Quadrant result I would gladly add it to this post. Please only post results Immediately after restart for conformity.
Android Ice Cream Sandwich Required
Root Required
Pre Requisites fulfilled (Root) (ICS)
Install "Adreno ICS Update" to the root of your SD Card
Toggle Signature Verification in Recovery
Install zip via Recovery
Fix Permissions
Reboot
ENJOI!!!
Thank you dhkr234 for the flashable zip framework.
Please post any other tested configurations and I will add them for other community members reference.
The usual warning goes here. I'm not responsible for what you do, or how you execute, use this at your own risk!

Additional Configurations Tested
Additional ROMS with confirmed improvements:
ROMS with these NEW Adreno Drivers Baked in:

I confirmed the new drivers work with Virtuous Inquisition and Wildchild IcE AOKP. With force 2d gpu redering enabled...I got 3000+ in quadrant and 5300+ in antutu

xmc wildchild22 said:
I confirmed the new drivers work with Virtuous Inquisition and Wildchild IcE AOKP. With force 2d gpu redering enabled...I got 3000+ in quadrant and 5300+ in antutu
Click to expand...
Click to collapse
Please post only 2D and 3D results.
Overall scores are not indicative of real performance gains.
I circled in the OP what scores are really affected.
Thank you,
gjcamp
Sent from my HTC_Amaze_4G using xda premium

Results

gjcamp said:
Thank you dhkr234 for the flashable zip framework.
Click to expand...
Click to collapse
Wow, you're welcome, but this is more than needed. As I recall, all I did was package some driver files in an update.zip with an "extract directory blah" line.
But hey, glad you benefited from that!!!
Edit: so I ran some tests with this driver.
1) It is **NOT** limited to S3/220, works just fine on my S2/205.
2) The advancements attributed to it are greatly exaggerated.
My results;
before, soft 2d
1337
2d 249
3d 936
before, hard 2d
1453
2d 672
3d 976
after, hard 2d
1485
2d 660
3d 990
second run after, hard 2d
1502
2d 833
3d 774
You will note that the big 2d jump happened with forcing 2d rendering. Even with the older driver.
The second run with the new drivers came out weird. Subsequent runs with the same driver looked a lot closer to the first run with the new drivers.
Yes, the new drivers perform better. Probably 5% or so overall is my guess.
And OP: Its not a "patch". Its a binary driver. A patch is a "differences" file for SOURCE code.

dhkr234 said:
Wow, you're welcome, but this is more than needed. As I recall, all I did was package some driver files in an update.zip with an "extract directory blah" line.
But hey, glad you benefited from that!!!
Edit: so I ran some tests with this driver.
1) It is **NOT** limited to S3/220, works just fine on my S2/205.
2) The advancements attributed to it are greatly exaggerated.
My results;
before, soft 2d
1337
2d 249
3d 936
before, hard 2d
1453
2d 672
3d 976
after, hard 2d
1485
2d 660
3d 990
second run after, hard 2d
1502
2d 833
3d 774
You will note that the big 2d jump happened with forcing 2d rendering. Even with the older driver.
The second run with the new drivers came out weird. Subsequent runs with the same driver looked a lot closer to the first run with the new drivers.
Yes, the new drivers perform better. Probably 5% or so overall is my guess.
And OP: Its not a "patch". Its a binary driver. A patch is a "differences" file for SOURCE code.
Click to expand...
Click to collapse
Glad to hear it worked for you.
Fyi-
These binaries in this driver is specifically listed on Qcomm's website for ARM7.
The update you had is for ARM 6.
If you see improvement then great!
Cheers,
gjcamp
Sent from my HTC_Amaze_4G using xda premium

gjcamp said:
Glad to hear it worked for you.
Fyi-
These binaries in this driver is specifically listed on Qcomm's website for ARM7.
The update you had is for ARM 6.
If you see improvement then great!
Cheers,
gjcamp
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
No, that was also for ARM7. All Adreno 2xx's are with ARM7's, from S1 upward.
---------- Post added at 01:24 AM ---------- Previous post was at 12:42 AM ----------
Oh man, I **REALLY** hate to have to break this to you, but this is exactly the same driver as in my zip from here: http://forum.xda-developers.com/showpost.php?p=23725278&postcount=39
... explains the performance results.
Sorry.

dhkr234 said:
No, that was also for ARM7. All Adreno 2xx's are with ARM7's, from S1 upward.
---------- Post added at 01:24 AM ---------- Previous post was at 12:42 AM ----------
Oh man, I **REALLY** hate to have to break this to you, but this is exactly the same driver as in my zip from here: http://forum.xda-developers.com/showpost.php?p=23725278&postcount=39
... explains the performance results.
Sorry.
Click to expand...
Click to collapse
No need to apologise. I simply looked at the date comparing your libs with what I downloaded directly from the Qualcomm Website. Seeing that Qualcomm released the ARMv6 drivers later than the ARMv7 I assumed you created the zip for ARMv6. I now see the matching CRC. My bad.
Qualcomm Dev Website
BTW your file is on the right.
Thank you,
gjcamp

Is it recommended to flash this?

mattlowry said:
Is it recommended to flash this?
Click to expand...
Click to collapse
No, all the ICS ROMs already have it.
It won't hurt though if you do.

*** Deleted ***

custroid said:
My bad!
I flashed this on ICS mytouch 4g, no difference my Quadrant is 2537
Click to expand...
Click to collapse
The OVERALL Quadrant score is of no concern. Especially since this Graphics Processor Unit (GPU) update ONLY effects the GPU SCORES.
Your OVERALL score can and will be impacted by other processes running in the background. Your OVERALL score is a reflection of your 2D/3D, SD Card R/W, CPU, MEM I/O, etc... TOTAL performance scores.
Additionally if your MT4G ICS update already has these Drivers Ver. 213 you will seee no gain in 2D/3D benchmarking either, since you would only be overwriting existing files wiht the SAME files.
If you just posted your 2D/3D scores before and after then we would have the information necessary to help you determine if this worked for you or not.
Thank you,
gjcamp

mattlowry said:
Is it recommended to flash this?
Click to expand...
Click to collapse
dhkr234 said:
No, all the ICS ROMs already have it.
It won't hurt though if you do.
Click to expand...
Click to collapse
I am not sure that ALL ICS Roms would have this as it was released by Qualcomm after some manufacturers released their ICS ROMS. Although it probably is in MOST cooked ROMS already.
You can always go into your SYSTEM/LIB and check which version you are running.
dhkr234 is correct. If you just flash it you will be OK. If you want to know if it helped you on the ROM you are running then document the 2D/3D scores before and after.

gjcamp said:
I am not sure that ALL ICS Roms would have this as it was released by Qualcomm after some manufacturers released their ICS ROMS. Although it probably is in MOST cooked ROMS already.
Click to expand...
Click to collapse
I doubt that there's anyone here running a factory ROM just interested in upgrading their GPU drivers....

*** Deleted ***

Does cm9 already have these drivers? does it matter if you're using sense or AOSP ?

Some_dude36 said:
Does cm9 already have these drivers? does it matter if you're using sense or AOSP ?
Click to expand...
Click to collapse
Yes to the first, probably no to the second.

Wow what a difference! Obviously works on virtuous inquisition. See attached
sent from my Virtuous Sensation.

[DEV][GPU] Adreno 220 ICS Driver patch [Needs Work]

Saw this posted in the t989 section, and thought I would x-post it here in case there are any devs that care to play around with it. Apparently, it does not seem to work for the few t989 people that have tried to flash it.
t989 thread:
http://forum.xda-developers.com/showthread.php?t=1638436
original thread (HTC Sensation section):
http://forum.xda-developers.com/showthread.php?t=1636752
gjcamp said:
This Adreno GPU update is ONLY designed to work on Qualcomm S3 ARM7 Devices running ICS.
Greetings, I have been on XDA for a long time and I hope that you all can benefit from this patch as we have over at the Amaze Forums. Here is a link to my Original Thread and evidence of this patch's success for our Qualcomm S3 Adreno 220 GPU devices running ICS.
We have proven that this driver Patch has doubled our GPU throughput for 2D and 3D rendering.
http://forum.xda-developers.com/showthread.php?t=1631223
I have only tested this on my T-Mobile HTC Amaze (Qualcomm S3 Adreno 220 GPU) and have not experienced any issues.
I have created this Recovery Flashable Patch to Install the Qualcomm Updated Adreno Drivers on the "Official Ruby ICS" release.
I did not get a screenshot of the results before flashing this, however I have seen dramatically improved result on my Quadrant 3D scores with "Force 2D GPU rendering" UNCHECKED in the Setting->Develop Options Menu of this ICS Release. With this option checked I have seen improvements on both 2D and 3D. Although results are slightly degraded for 3D from post update the 2D results have doubled in value.
Quadrant results were obtained immediately after restart to avoid any other processes interfering with the results.
AFTER "Adreno ICS Update" Screenshot 2D Rendering NOT checked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFTER "Adreno ICS Update" Screenshot 2D Rendering CHECKED.
If someone would post a screenshot of the before Quadrant result I would gladly add it to this post. Please only post results Immediately after restart for conformity.
Android Ice Cream Sandwich Required
Root Required
Pre Requisites fulfilled (Root) (ICS)
Install "Adreno ICS Update" to the root of your SD Card
Toggle Signature Verification in Recovery
Install zip via Recovery
Fix Permissions
Reboot
ENJOI!!!
Thank you dhkr234 for the flashable zip framework.
Please post any other tested configurations and I will add them for other community members reference.
The usual warning goes here. I'm not responsible for what you do, or how you execute, use this at your own risk!
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Quadrant scores mean nothing......pointless

kr3g3r said:
Quadrant scores mean nothing......pointless
Click to expand...
Click to collapse
Just because he used a quadrant SS doesnt mean its useless. It does more than increase quadrant score.
Sent from my Galaxy S2 Skyrocket using XDA premium on CM7

Guys, as I posted in original thread, this DOES NOT WORK, WE WILL TRY TO FIX IT THOUGH.

Looks pretty legit to have.
Double my GPU output, whynot? =]
Quadrant is outdated but its still interesting to see who gets the higher scores out of your friends/family.

CrazyEye said:
Looks pretty legit to have.
Double my GPU output, whynot? =]
Quadrant is outdated but its still interesting to see who gets the higher scores out of your friends/family.
Click to expand...
Click to collapse
Read my warning...

kr3g3r said:
Quadrant scores mean nothing......pointless
Click to expand...
Click to collapse
Agreed. I didn't post them though. It just seemed easier to quote the OP/creator from the original thread.
alphadog32 said:
Guys, as I posted in original thread, this DOES NOT WORK, WE WILL TRY TO FIX IT THOUGH.
Click to expand...
Click to collapse
Indeed. I noted that in the OP. I just wanted to post it here in case there might be someone that misses the thread in the t989 section who would be interested in looking into it.
Just for reference, here's the list of files in the zip.
/system
---/etc/firmware/
---a225p5_pm4.fw
---a225_pfp.fw
---a225_pm4.fw
---a300_pfp.fw
---a300_pm4.fw
---leia_pfp_470.fw
---leia_pm4_470.fw
---yamato_pfp.fw
---yamato_pm4.fw
---/lib
------libC2D2.so
------libgsl.so
------libOpenVG.so
------libsc-a2xx.so
------/egl
---------egl.cfg
---------eglsubAndroid.so
---------libEGL_adreno200.so
---------libGLESv1_CM_adreno200.so
---------libGLESv2_adreno200.so
---------libGLES_android.so
---------libq3dtools_adreno200.so

Interesting
Sent from my SGH-T989 using Tapatalk 2

Would placing the files in manualy work even if flashing the zip doesn't?

No
Sent from my SGH-T989 using Tapatalk 2

Optimus 3DMax ROM with 3D Kernel benchmarks

Maybe still many people are asking themselves if they can use Optimus 3DMax ROMs with Kernels for Optimus 3D. Here I show you a picture of my tests with “AcuraTeam_3D_MAX_V1” and “The Promethius Project V1.3” ROMs and 3 different Kernels:
1. 1-V1-Maximo (beta3)
2. Titan V0.6+
3. Promethius V1.3+
4. Maximo Speed V2 1208MHz
Promethius 1.4+, 1.5+ and 1.4.5 are not included since they give me lock in twlan_wq lock and 48% CPU constant load till reboot. 1-V1-Maximo (beta1) and 1-V1-Maximo (beta2) give constant pvr_workqueue CPU usage around 1-5% and that give lower scores in benches and sometimes and *wakelock* with battery drain. For me these are the most stable Kernels.
I use V21E Baseband
The combination between AcuraTeam_3D_MAX_V1 ROM and Promethius V1.3+ give me best scores and long battery life.
All scores are made by taking the highest score from 5 consecutive runs.
CPU set on performance/cfq
FastReboot before the first test.
Have fun with the data
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT:
Added Maximo Speed V2 1208MHz kernel, and AcuraTeam_3D_MAX_V3.1 ROM
As you see there is no more that 1-5% difference between the ROM/KERNEL combinations... so all difference you FEEL is a nice placebo "effect". Nonplacebo is that AcuraTeam_3D_MAX_V3.1/Maximo Speed V2 1208MHz has very long battery life when set to 1008/200MHz and vr I/O Scheduler and less lockups of my WIFI - probably more voltage for WIFI or changed sleep sequence or s.t. else

p-vlad said:
Maybe still many people are asking themselves if they can use Optimus 3DMax ROMs with Kernels for Optimus 3D. Here I show you a picture of my tests with “AcuraTeam_3D_MAX_V1” and “The Promethius Project V1.3” ROMs and 3 different Kernels:
1. 1-V1-Maximo (beta3)
2. Titan V0.6+
3. Promethius V1.3+
Promethius 1.4+, 1.5+ and 1.4.5 are not included since they give me lock in twlan_wq lock and 48% CPU constant load till reboot. 1-V1-Maximo (beta1) and 1-V1-Maximo (beta2) give constant pvr_workqueue CPU usage around 1-5% and that give lower scores in benches and sometimes and *wakelock* with battery drain. For me these are the most stable Kernels.
I use V21E Baseband
The combination between AcuraTeam_3D_MAX_V1 ROM and Promethius V1.3+ give me best scores and long battery life.
All scores are made by taking the highest score from 5 consecutive runs.
CPU set on performance/cfq
FastReboot before the first test.
Have fun with the data
View attachment 1138919
I wish there is Promethius V1.3+ Kernel with -Lowered Voltages and minimal MHZ and Lowered Deep Sleep Delay
Click to expand...
Click to collapse
Thanks for the Chart man.
AcuraTeam Rom not bad . Hows the video recording @1080p, what score do you get with 1.4+ ,1.5

Do you do any thing special to flash a 3D Max ROM?
Sent from my LG-P920 using Tapatalk

defcomg said:
Thanks for the Chart man.
AcuraTeam Rom not bad . Hows the video recording @1080p, what score do you get with 1.4+ ,1.5
Click to expand...
Click to collapse
AcuraTeam Rom with Promethius V1.3+ Kernel have good @1080p and 3D 720p recording - no glitches. For Maximo and Titan V0.6+ i have not test.
I have test the 1.4+ ,1.5 but as they were giving me problems I have not record these scores but there was not s.t. I should remember or striking.
Franzferdinan51 - I just install it over “The Promethius Project V1.3” with CWM. All programs and data stay there. I change it back to “The Promethius Project V1.3” by mistake and then again to “AcuraTeam_3D_MAX_V1” and still was all OK. Of course I took full backup on my system before i did that all.

Okay thank you I noticed xda don't have a 3D Max forum where can I find 3Dmax roms
Sent from my LG-P920 using Tapatalk

Franzferdinan51 said:
Okay thank you I noticed xda don't have a 3D Max forum where can I find 3Dmax roms
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
http://www.wuala.com/caroceiro/optimus 3d/roms/acura/optimus 3d -3dMAX/?lang=en

@TS
i tried to flashed it (3d max rom v2) over to my stock p920 v21e rom but after flashing and reboot my phone it stays on LG LOGO only.. nothing happens..
any help?

JastaPein said:
@TS
i tried to flashed it (3d max rom v2) over to my stock p920 v21e rom but after flashing and reboot my phone it stays on LG LOGO only.. nothing happens..
any help?
Click to expand...
Click to collapse
Acura 3D MAX V2 use pure ext4. You can not flash it over another ROM on ext3. I have used V1 in my tests as it is written in my first post.

So how do u flash. Properly to make it work
Sent from my LG-P925 using xda app-developers app

p-vlad said:
Acura 3D MAX V2 use pure ext4. You can not flash it over another ROM on ext3. I have used V1 in my tests as it is written in my first post.
Click to expand...
Click to collapse
Im sorry but i really dont know how to use EXT 3 or 4 .. Can you help us how to properly flash it?
Step by Step Tutorial is a great idea for all Optimus 3D Users

JastaPein said:
Im sorry but i really dont know how to use EXT 3 or 4 .. Can you help us how to properly flash it?
Step by Step Tutorial is a great idea for all Optimus 3D Users
Click to expand...
Click to collapse
it's so easy to install... search on google acurarom 3dmax v3.1... on htcspain...on the first page you find all you need

UPDATE (15.07.2012)
KERNEL: Maximo Speed V2 1208MHz
ROM: AcuraTeam 3D MAX V3.1

Benchmark Scores

Hello guys ! I have tried many ROMs available for our beloved Fit and each with different performance score
I would like to ask Fit users to benchmark their devices with and the result.
Notice: Please add a screenshot and state the ROM you are using, CPU settings and if any script installed
Thank You for participating.
I seen there are several more threads opened on this topic but as Android has evolved I thought a new fresh one was in order.
So here I go first:
ROM: KITKAT SANDWICH V 1.0 (CM9.2 Based)
CPU: Min: 245 / Max: 729 / Gov: CONSERVATIVE
Script: Fly-On Mod Beta5
Universal Odex Script ( Full odex of rom )
I have installed the new ICS adreno200 libs
Benchmark: Quadrant Standard Edition v2.1.1
Score: 1452
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ROM - cm-11-20131225-EXPERIMENTAL-beni.zip
Android kitkat
Benchmark score 606.
I'm unable to upload screenshots of yhe result.
Sent from my GT-S5670 using xda app-developers app

My device
ROM: MIUIV4 ICS 3.2.22 Caspian Series
CPU: Min: 122.88
Max: 768.00
Gov: smartassV2
Script: No Script (May install FlyOn Mod)
Score: 615

k3eNaNz said:
Hello guys ! I have tried many ROMs available for our beloved Fit and each with different performance score
I would like to ask Fit users to benchmark their devices with and the result.
Notice: Please add a screenshot and state the ROM you are using, CPU settings and if any script installed
Thank You for participating.
I seen there are several more threads opened on this topic but as Android has evolved I thought a new fresh one was in order.
So here I go first:
ROM: KITKAT SANDWICH V 1.0 (CM9.2 Based)
CPU: Min: 245 / Max: 729 / Gov: CONSERVATIVE
Script: Fly-On Mod Beta5
Universal Odex Script ( Full odex of rom )
I have installed the new ICS adreno200 libs
Benchmark: Quadrant Standard Edition v2.1.1
Score: 1452
Click to expand...
Click to collapse
Can u give me "the new ICS adreno200 libs" & tell me whether it works for GB & JB??
Thnks!!
Btw... Huge score!!

Galaxy_Rohit said:
Can u give me "the new ICS adreno200 libs" & tell me whether it works for GB & JB??
Thnks!!
Btw... Huge score!!
Click to expand...
Click to collapse
The source from were i downloaded it was different but i found one on our forum. DO BACKUP as this is intended for ICS upgrade for what i have read and yeah as the thread says don`t install them on 2.3 (CM7)
http://forum.xda-developers.com/showthread.php?p=23455248

Quad score 1462
Just changed my ROM today,
Awesome fast.
ROM - BeniOdex NewExp-JB SE080813CosmicFit.zip
Smartassv2
Quad score. 1462
Sent from my GT-S5670 using xda app-developers app

MIUI Supportive??
k3eNaNz said:
The source from were i downloaded it was different but i found one on our forum. DO BACKUP as this is intended for ICS upgrade for what i have read and yeah as the thread says don`t install them on 2.3 (CM7)
http://forum.xda-developers.com/showthread.php?p=23455248
Click to expand...
Click to collapse
Will those work on the MIUI ROM im using???? See my signature if u want to see the details of the ROM..
P.S.- Im a noob.. Please dont get crazy over my no0b questions :silly:

Dhanesh95 said:
Will those work on the MIUI ROM im using???? See my signature if u want to see the details of the ROM..
P.S.- Im a noob.. Please dont get crazy over my no0b questions :silly:
Click to expand...
Click to collapse
It doesn`t matter what type of ROM is. Just what based is. If it is ICS+ it is suppose to work.
benchmark your current rom, see score. Backup current ROM then install adreno libs and benchmark again and see if there`s any improvement.
Note that this are Graphics libs so see 2D&3D scores.

k3eNaNz said:
It doesn`t matter what type of ROM is. Just what based is. If it is ICS+ it is suppose to work.
benchmark your current rom, see score. Backup current ROM then install adreno libs and benchmark again and see if there`s any improvement.
Note that this are Graphics libs so see 2D&3D scores.
Click to expand...
Click to collapse
Thank You!
Im flashing HD V3 now... Will try those libs on MIUI later... :silly: :good:

New ROM Benchmark Score
ROM : Hyper Droid V3
CPU: Min : 245
Max: 800
Governor: ondemand
Script: Fly-On MOD V4.0 RC-1
Score : 1233

this is mine
jelly bread
max procesor 729
no script just s2e

pavel73 said:
this is mine
jelly bread
max procesor 729
no script just s2e
Click to expand...
Click to collapse
Holy crap that is good performance for 729. I used that ROM for a long time too but changed it because of some errors. Maybe some day someone will port the last update for us.

I'm on official cm7 & the antutu app is Force Closing. Pls. give me the app which u guys r using...Btw I'm using antutu for the very 1st time.. Pls. help.

Galaxy_Rohit said:
I'm on official cm7 & the antutu app is Force Closing. Pls. give me the app which u guys r using...Btw I'm using antutu for the very 1st time.. Pls. help.
Click to expand...
Click to collapse
Antutu is no longer suporting Armv6 ( devices like gio,mini,fit etc )
Quadrant Standard still has support for us

Here's mine...without any script...nothing!! Just pure official cm7 with 24-30user apps installed.
via Quadrant Professional(coz it doesn't need internet all the time...& neither do I)