Database Info

[ROM] Samsung GFit Gingerbread 2.3.4 new version (29th July)

I'm not sure if this is the right forum for posting this but yeah, if it's wrong feel free to delete :3
Was wandering on Samfirmware.com, found out that a new update for Samsung Gfit gingerbread (S5670XWKQ2) has just been released, i installed it and wow:
- Much Snappier
- Option to turn off mobile data in the "shutdown" menu (under the flight mode)
- Option for 2G Only OR 3G only Mode (in wireless networks options)
- Much MUCH better reception, the phone gives me good reception on 3G mode and it STICKS there, not randomly snapping between 2g, edge & 3G.
-OH and the recovery screen works on this one too (power + home + volume down)
-Slightly Better connected letters for the Arabic language, idk maybe it's just me o.o
-It seperates the phone numbers now (example 0777480209 becomes 077-7480-209 But that only worked on an Incoming/Outgoing Call).
-A "Traffic Widget" that asks you to enter a specific destination, idk what this does o,o.
-anything else tell me :3
you can get it here http://www.samfirmware.com/WEBPROTECT-s5670.htm (S5670XWKQ2 in the europe firmwares owo)
====Installation instructions====
0 - Connect your Phone in "Download" Mode (By turning off the phone, clicking the Power Button + Home button + Volume down button).
1 - Download the file from the above page.
2 - extract to a folder using the password Provided on the site (idk if i can provide it here o.o)
3 - you'll get two files, a .Dll and a .Tar, keep it like this, don't get nosy and rename/extract anything, keep them in the file.
4 - Run ODIN multi downloader, and load up a .OPS file for your phone.
5 - Select "One file package" from ODIN and in look waaay down, there's the one package selector, click it and browse to the .Tar file you got earlier, and click it.
6 - Once you made sure everything is in place, click start and it should take no longer than 3-5 minutes and you're done
7 - once done, the phone will restart and may take a while to start up, this is normal, go to settings, change the language and you're ready to go.
Boot into recovery mode, clear the cache partition, then Enjoy.
This is GingerBread 2.3.4 S5670XWKQ2
Any questions feel free to ask <3

What to do with .dll file
Sent from my GT-S5670 using Tapatalk

raj3534 said:
What to do with .dll file
Click to expand...
Click to collapse
Don't do anything with it, just keep it in the same folder with the .Tar file and just flash the phone using the .tar hope that helped <3

this rom supported arabic ????

ahmedadam said:
this rom supported arabic ????
Click to expand...
Click to collapse
Well it seems to connect the letters better, but no, not yet, wait for the next updates

thank youu

a eror when i turn on and in recovery mode say can't acces to ?system csc/ser/system what i do?

help........
after i update it is sayin process com.sec.android.ugl has stopped unexpectedly , please try again
d nly option is force close
when i select it , it is repeating

does exist ClockworkMod Recovery for s5670 i want kitchen themes

kannegantiaditya said:
after i update it is sayin process com.sec.android.ugl has stopped unexpectedly , please try again
d nly option is force close
when i select it , it is repeating
Click to expand...
Click to collapse
first go in recovery mode in do a reset factory and install agin this rom

kannegantiaditya said:
after i update it is sayin process com.sec.android.ugl has stopped unexpectedly , please try again
d nly option is force close
when i select it , it is repeating
Click to expand...
Click to collapse
i got that too the first time, easily solved.
Flash the S5670XXKPI here http://hotfile.com/dl/120301527/b900a23/S5670XXKPI.rar.html First, Reboot into recovery and clear the cache partition, and then flash the new Firmware and clear the cache.
That should do it

no themes for samsung fit S5670XWKQ4 gingerbread?

[HOWTO] install CM6 RC3 to XT720 from stock (newbie friendly)

Let's begin
1st download all the necessary files:
Motorola 5.4.0 Driver with MotoHelper http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
stock UK XT720 sbf and RSD Lite 4.9 from http://forum.xda-developers.com/showthread.php?t=953863
SuperOneClickv2.1.1 ftom http://forum.xda-developers.com/showthread.php?t=887416
OI File Manager or from Android Market
Open Recovery for XT720 from http://forum.xda-developers.com/showthread.php?t=1242259
CM6 RC3 from http://forum.xda-developers.com/showthread.php?t=1197655
Then proceed to install the windows drivers for XT720,
once that is done flash your XT720 back to factory stock,
to go into ROM flashing mode Hold Power + Volume Down + Camera buttons all at once, be patient, it will take a while and a couple of reboot.
When the phone is finally done booting up, go into Settings > Applications, and check the boxes for USB debugging + Stay awake,
now you can run SuperOneClickv2.1.1 to root your XT720, for step by step rooting instructions follow this guide http://forum.xda-developers.com/showthread.php?t=887416
Next you will want to install a File Manager to your XT720, the stock XT720 doesn't include any file manager,
open a command line (in windows run CMD),
switch to the directory ..\SuperOneClickv2.1.1-ShortFuse\ADB\
run the command line adb.exe install FileManager-1.1.6.apk
The next step is best done using a microSD card reader, then you can drag & drop all the files for your XT720 directly to the SD card from Windows Explorer
- OpenRecovery.apk,
- the unzipped files from OpenRecovery-XT720-01 folder,
- update-cm-6.3.0-RC3-MilestoneXT720-signed.zip,
- gapps-hdpi-20101114-signed.zip
Using the OI File Manager install OpenRecovery.apk (it should be at the root of your SDcard),
run Open Recovery from XT720 stock launcher's app drawer,
select Install Recovery System (allow super user),
then follow the instructions to install OpenRecovery-XT720-01 from http://forum.xda-developers.com/showthread.php?t=1242259
Once you are done proceed to install update-cm-6.3.0-RC3-MilestoneXT720-signed.zip, and gapps-hdpi-20101114-signed.zip using OpenRecovery-XT720 (for details follow http://forum.xda-developers.com/showthread.php?t=1197655),
select clear cache, dalvik, and factory reset
choose the reboot option from OpenRecovery-XT720 menu,
the first boot of CM6 will take a very long time,
when you see the launcher, let it finish loading, then reboot the phone again via power button > reboot,
after this last reboot, the phone is finally ready for normal usage.
Enjoy!

You can get the Dexter's OpenRecovery.apk here

you can use universal androot to root your phone alternatively. its super easy. just drag it onto your sd card (or download directly from your phone), install the apk, and click root. heres a link. http://www.4shared.com/file/HvHnis8C/Universal_Androot_v161.html

I actually did this to a friends xt720 yesterday and I needed to fix the APN settings, he wasn't getting data.

WARNING, about BusyBox newer than v1.17.1 and Link2SD
So i found out the hard way there's an odd bug with BusyBox 1.18.x or newer it conflicts with Link2SD, it wont mount and causes Link2SD to throw this message
Code:
Mount script error
Mount script cannot be created
mount: mounting /dev/block/vold/179:2 on /data/sdext2
failed: no such device
reverting BusyBox back to 1.17.1 fixed the problem

Help on Boot Loop
Followed all instructions here to update to the the cm 6.3.0 RC3. Everything appeared to go as stated, but after reboot i seem to be stuck in a vicious boot loop. I get the cyanogen mod droid logo but it seems to pop up every 10 seconds or so without the phone ever starting up. Any help would be greatly appreciated. It's cute as a paperweight, but not much good as a phone.
Disregard....after rebooting for nearly nine hours....the phone finally started up and appears to be working....Thanxxxx

I too now am unable to access data....i am not skilled enough to work with the APN settings. Could you please help me out on what i need to do to get my data working again...no internet access sux....

AllGamer said:
Next you will want to install a File Manager to your XT720, the stock XT720 doesn't include any file manager,
Click to expand...
Click to collapse
Awesome Instructions bud, much needed for the first timers. Just thought I would add that stock 2.1 always came with quickoffice for me and that's what I normally use at first to install Open Recovery but always end up needing a better File Manager anyway. So either way, I hate to be a stickler just might be one less step lol. Good job AllGamer dude!
Ps.. I should have just said good job dude your way is better lol.

hitech1 said:
I too now am unable to access data....i am not skilled enough to work with the APN settings. Could you please help me out on what i need to do to get my data working again...no internet access sux....
Click to expand...
Click to collapse
Install APN manager from the market and find your carrier there.
You could always just input them manually, doesn't require any skill bud, you just have to google the correct APN configuration details.

nice App
JiroPrinz8 said:
Install APN manager from the market and find your carrier there.
Click to expand...
Click to collapse
https://market.android.com/details?id=ale.android.apnmanager&feature=search_result
this is an Excellent recommendation.
I didn't even know such APP existed
it's so easy to enter APN data... pick and choose, done!

Don't think you should be flashing ROMS if you're hesistant about manually entering an APN, my 2 cents lol.

I would still rather recommend singapore rom, with the tv out and everything. Don't know of any cons with this atm.

Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.

Leotronick said:
Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.
Click to expand...
Click to collapse
I'm not certain but I think this means that Android thinks your battery has more charge than the hardware does. I would first try to redo battery calibration (there are threads in the XT720 general section about how to do this) if you can convince yourself that your battery is actually full. It can be a little tricky.

Leotronick said:
Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.
Click to expand...
Click to collapse
might be your vsel being too low. it happened to me too, and i made the vsel a little higher and it didnt happen anymore.

Hi, I have a noob question...
Can I install this recovery image (CM6) directly from stock Videotron SBF?
I do have install open Recovery based on Androidiani. Can I flash this Rom (CM6) with that recovery or I need something diffrent?
Thanks for your help!

speedmax said:
Hi, I have a noob question...
Can I install this recovery image (CM6) directly from stock Videotron SBF?
I do have install open Recovery based on Androidiani. Can I flash this Rom (CM6) with that recovery or I need something diffrent?
Thanks for your help!
Click to expand...
Click to collapse
if you are already on stock, then yes you can flash CM6
but make sure you are rooted first
and use the Open Recovery XT720 listed in the OP topic

AllGamer said:
if you are already on stock, then yes you can flash CM6
but make sure you are rooted first
and use the Open Recovery XT720 listed in the OP topic
Click to expand...
Click to collapse
Thanks, I Will proceed tomorow.
Regards,
Sent from my MB860 using xda premium

Just installed! Working nice...
Camera and camcorder are working, it was a bug with stock Rom.
Is there a Overcloking kernel for XT720 CM6 rom?
Or is there a way to overclock it with the current one?
Regards et thanks for your help!

speedmax said:
Just installed! Working nice...
Camera and camcorder are working, it was a bug with stock Rom.
Is there a Overcloking kernel for XT720 CM6 rom?
Or is there a way to overclock it with the current one?
Regards et thanks for your help!
Click to expand...
Click to collapse
yes, just download the milestone OC utility from Android market

Update Galaxy Fit With 4.0.3 Ice-Cream Sandwich firmware [BETA 4] Realese

Prerequisites
- Charge your device to a minimum of 90% as since the procedure is bit lengthy, the phone will consume more battery than the normal usage. Lesser battery will lead to the turning Off of the device in the middle of the firmware update process.
- Back up all your data which is there in the phone memory, as in an unlikely event if the data gets lost then you can easily restore the backup.
- Up next is you need to ensure that the USB Debugging is enabled in your phone. The USB Debugging can be enabled from the path of Settings > Applications > Development > USB debugging. Apart from this you also need to ensure that your computer has ADMIN privileges and USB Read / Write Access. It’s not recommended to use computers which have limited access.
Instructions For Custom ROM users
Just in case if you are on any of the custom ROMs then you need turn Off your phone so that you can then enter into the recovery mode. The recovery mode can be entered by pressing Volume UP Key + Middle button, and holding both simultaneously press the Power Button. If the device boots normally then you need to again try to enter the same.
In the recovery mode, select the options like Wipe data/factory reset, Wipe Cache partition and then select reboot system now to reboot the phone. You can select the options using the Volume keys and can select the appropriate option by pressing the Power button. This basically clears off all the cache data which is there in the phone so that the room can be made to accommodate this all new custom ROM firmwares
Procedure For Updating
STEP 1: Official Firmware Installation
First up you need to update your phone with the 2.3.x version of firmware (And not on Froyo 2.2.x). You need to follow the instructions which are mentioned below in the form of Links. Please note that it’s a base firmware and you need to install it
STEP 2:Install ClockWorkMod 5 Recovery Image
First up you need to download the beni_cwm-5_ext4_v2.tar & odin+beni.ops.zip.Extract the files and Find Odin 4.38.exe And BENI_v1.0.ops in your Extracted Folder.
Now, Switch off Your Fit And Enter into Download Mode By Pressing Power+Menu Button+Volume Down Button Until Downloading Mode Appears.Open S5670_Odin_Multi_Downloader_v4.38.exe.Place BENI_v1.0.ops on OPS tab.Check the One Package Option.Place beni_cwm-5_ext4_v2.tar on One Package tab.Connect the device to PC which you have put in Downloading Mode.Press Start and wait for flashing process is finished.
After this you will have to proceed to the next step which is mentioned Further
STEP 3:Installation Of CM 9 ICS Firmware
1.First up you need to download Zip file which is mentioned below in your computer
https://hotfile.com/dl/151919225/1624f9b/cm_beni-beta4.zip.html
2.Now, once you are done with downloading the above file in your computer, you need to now copy the file in your phone and ensure that you are not placing these file deep into the phone. Please note that you should not modify or rename the files which you have downloaded or else there is a high probability that the file would not be supported.
3.After this Enter in Recovery Mode by Holding Power Off + Menu Button Until Recovery Mode Appears.
4.In the recovery mode, you will have to choose “choose zip from SD”. Now, from the list of files and paths you will need to first select the file which is named as “cm_beni-beta4.zip (or which You Have Copied to SD Earlier)”. Ensure that you select the file properly.
5.Now, as soon as the process is over.Select Wipe Data/Factory Reset And Wipe Cache Partition.After All Done Select “Reboot System Now”
So, there you go as soon as the phone is rebooted you will see that the firmware is updated with the latest version of Android 4.0(ICS 4.0.3)...
No Need To Say THANKS Just Press It..

mohitawasthi said:
Prerequisites
- Charge your device to a minimum of 90% as since the procedure is bit lengthy, the phone will consume more battery than the normal usage. Lesser battery will lead to the turning Off of the device in the middle of the firmware update process.
- Back up all your data which is there in the phone memory, as in an unlikely event if the data gets lost then you can easily restore the backup.
- Up next is you need to ensure that the USB Debugging is enabled in your phone. The USB Debugging can be enabled from the path of Settings > Applications > Development > USB debugging. Apart from this you also need to ensure that your computer has ADMIN privileges and USB Read / Write Access. It’s not recommended to use computers which have limited access.
Instructions For Custom ROM users
Just in case if you are on any of the custom ROMs then you need turn Off your phone so that you can then enter into the recovery mode. The recovery mode can be entered by pressing Volume UP Key + Middle button, and holding both simultaneously press the Power Button. If the device boots normally then you need to again try to enter the same.
In the recovery mode, select the options like Wipe data/factory reset, Wipe Cache partition and then select reboot system now to reboot the phone. You can select the options using the Volume keys and can select the appropriate option by pressing the Power button. This basically clears off all the cache data which is there in the phone so that the room can be made to accommodate this all new custom ROM firmwares
Procedure For Updating
STEP 1: Official Firmware Installation
First up you need to update your phone with the 2.3.x version of firmware (And not on Froyo 2.2.x). You need to follow the instructions which are mentioned below in the form of Links. Please note that it’s a base firmware and you need to install it
STEP 2:Install ClockWorkMod 5 Recovery Image
First up you need to download the beni_cwm-5_ext4_v2.tar & odin+beni.ops.zip.Extract the files and Find Odin 4.38.exe And BENI_v1.0.ops in your Extracted Folder.
Now, Switch off Your Fit And Enter into Download Mode By Pressing Power+Menu Button+Volume Down Button Until Downloading Mode Appears.Open S5670_Odin_Multi_Downloader_v4.38.exe.Place BENI_v1.0.ops on OPS tab.Check the One Package Option.Place beni_cwm-5_ext4_v2.tar on One Package tab.Connect the device to PC which you have put in Downloading Mode.Press Start and wait for flashing process is finished.
After this you will have to proceed to the next step which is mentioned Further
STEP 3:Installation Of CM 9 ICS Firmware
1.First up you need to download Zip file which is mentioned below in your computer
https://hotfile.com/dl/151919225/1624f9b/cm_beni-beta4.zip.html
2.Now, once you are done with downloading the above file in your computer, you need to now copy the file in your phone and ensure that you are not placing these file deep into the phone. Please note that you should not modify or rename the files which you have downloaded or else there is a high probability that the file would not be supported.
3.After this Enter in Recovery Mode by Holding Power Off + Menu Button Until Recovery Mode Appears.
4.In the recovery mode, you will have to choose “choose zip from SD”. Now, from the list of files and paths you will need to first select the file which is named as “cm_beni-beta4.zip (or which You Have Copied to SD Earlier)”. Ensure that you select the file properly.
5.Now, as soon as the process is over.Select Wipe Data/Factory Reset And Wipe Cache Partition.After All Done Select “Reboot System Now”
So, there you go as soon as the phone is rebooted you will see that the firmware is updated with the latest version of Android 4.0(ICS 4.0.3)...
No Need To Say THANKS Just Press It..
Click to expand...
Click to collapse
From which planet are you?

ZmisiS said:
From which planet are you?
Click to expand...
Click to collapse
Didn't Get U..

ZmisiS said:
From which planet are you?
Click to expand...
Click to collapse
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??

mohitawasthi said:
Didn't Get U..
Click to expand...
Click to collapse
Lol .. Wen beta 7 s out y r u posting an update for beta 4 ?? Read da forum rules .. Dnt post spam .. !!
Sent From Hell ... Wanna Come .. ??

avilove4u said:
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??
Click to expand...
Click to collapse
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...

avilove4u said:
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??
Click to expand...
Click to collapse
He already has 15 posts. He coping from other websites and pasting on this site.

ZmisiS said:
He already has 15 posts. He coping from other websites and pasting on this site.
Click to expand...
Click to collapse
Ohh u knw dat fact...lolzz
Give d souce where i copy paste it...

mohitawasthi said:
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...
Click to expand...
Click to collapse
This Beta 4 already is on this site.
---------- Post added at 08:26 PM ---------- Previous post was at 08:25 PM ----------
mohitawasthi said:
Ohh u knw dat fact...lolzz
Give d souce where i copy paste it...
Click to expand...
Click to collapse
Ask Aspire.

mohitawasthi said:
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...
Click to expand...
Click to collapse
No one wants beta 4 wen beta 7 s out .. !!
Sent From Hell ... Wanna Come .. ??

ZmisiS said:
He already has 15 posts. He coping from other websites and pasting on this site.
Click to expand...
Click to collapse
Ohh .. Then it seems dat he loves flickering n bugs.. As beta 4 has sooo many bugs !!!!
Sent From Hell ... Wanna Come .. ??

ZmisiS said:
This Beta 4 already is on this site.
---------- Post added at 08:26 PM ---------- Previous post was at 08:25 PM ----------
Ask Aspire.
Click to expand...
Click to collapse
Why dude why i ask to Aspire U say dat i copy paste it so u knw dat fact frm where i copy paste it so jst tel wats d problm....i repeat mind ur work dont interfere...

mohitawasthi said:
Why dude why i ask to Aspire U say dat i copy paste it so u knw dat fact frm where i copy paste it so jst tel wats d problm....i repeat mind ur work dont interfere...
Click to expand...
Click to collapse
Just you work. I have a right to express their opinion.

ZmisiS said:
Just you work. I have a right to express their opinion.
Click to expand...
Click to collapse
yea so only express ur opinion or give a suggestion...dont interfere...mind ur work nly..

mohitawasthi said:
yea so only express ur opinion or give a suggestion...dont interfere...mind ur work nly..
Click to expand...
Click to collapse
My opinion is that what you are doing on this website is wrong.

Bootloop problem(due to setting wrong permission)

I cant boot my galaxy i9003...the phone hangs in the 1st step(where the name of the phone appears) and then restarts and so on. Before this mishap i was working with rootbroswer and setting permissions in SYSTEM/APP & SYSTEM/LIB folders. I can acess to both the stock recovery and download mode. Sadly i dnt hv CWM installed. Is there any way to fix this bootloop.plz help me out......
I m running on Gingerbread 2.3.5 XWKPH.
(P.s-i m very new here,so i wud appreciate if u add the links of downloadable scripts/softwares/tutorials)

In the cwm try wiping cache...n reboot.but i don't think that will help so u might have to reflash the Os

Don't have cwm
loneagl said:
In the cwm try wiping cache...n reboot.but i don't think that will help so u might have to reflash the Os
Click to expand...
Click to collapse
i dnt hv cwm installed in my devide.....is there any way to acess it from outside? I wiped my cache using stock recovery but still cnt boot.hv any1 faced such problem before,plz send me d topic link if u find any......thanks.

dexter.crackpot said:
i dnt hv cwm installed in my devide.....is there any way to acess it from outside? I wiped my cache using stock recovery but still cnt boot.hv any1 faced such problem before,plz send me d topic link if u find any......thanks.
Click to expand...
Click to collapse
Wipe data from recovery. Reflash if still doesn't work
Sent from my GT-I9003 using xda app-developers app

dexter.crackpot said:
i dnt hv cwm installed in my devide.....is there any way to acess it from outside? I wiped my cache using stock recovery but still cnt boot.hv any1 faced such problem before,plz send me d topic link if u find any......thanks.
Click to expand...
Click to collapse
go to download mode & flash xda_bam bck kernel CF ROOT v14 version kernel. It will provide u cwm recovery. But it will not solve ur problem.
Better u should reflash. Try DDKP3 latest rom.

I tried dat too.
bscraze said:
Wipe data from recovery. Reflash if still doesn't work
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
i did that.still no use....can i somehow acess to the phone via any software & set the right permissions?
Thnx 4 taking out tym for my problem.

dexter.crackpot said:
i did that.still no use....can i somehow acess to the phone via any software & set the right permissions?
Thnx 4 taking out tym for my problem.
Click to expand...
Click to collapse
i think via adb we can do that. But I dont have that knowledge. Its always better that u should switch to new stable ddlf2 value pack. Ddkp3 is a little bit older rom. Lots of mods are avilable for DDLF2 rom. And from next time always keep a backup in hand using cwm.

dexter.crackpot said:
i did that.still no use....can i somehow acess to the phone via any software & set the right permissions?
Thnx 4 taking out tym for my problem.
Click to expand...
Click to collapse
Can you go to CWM recovery? If yes, there is a "fix permissions" under "advanced" menu.

Hetalk said:
Can you go to CWM recovery? If yes, there is a "fix permissions" under "advanced" menu.
Click to expand...
Click to collapse
Fix Permissions :: Resets system permissions back to their default values.
I think this will work. For that first flash xda_bck CF root v14 fix verson kernel.

Could you tell us the system files and libs you have changed? Fix Permissions (I think??) only fixes APK permissions, since the OP said he also played around with /system/lib, I believe it will take a lot more. I can help you as I know how to use ADB and most of its commands. If you could tell us the files you have changed, I will be able to write a small guide here. All what you need to do is just to Chmod (CHange MODe) and Chown (CHange OWNer) some files (If you have modded any libs, you would also have to adb push). Its pretty simple trust me

i think your motherboard is broken. mine is broken too and my warranty is not valid anymore. hope you can fix yours and mine too

I used "i think???" cz i wsnt sure if it czd the loop
FeelLikeASir said:
Could you tell us the system files and libs you have changed? Fix Permissions (I think??) only fixes APK permissions, since the OP said he also played around with /system/lib, I believe it will take a lot more. I can help you as I know how to use ADB and most of its commands. If you could tell us the files you have changed, I will be able to write a small guide here. All what you need to do is just to Chmod (CHange MODe) and Chown (CHange OWNer) some files (If you have modded any libs, you would also have to adb push). Its pretty simple trust me
Click to expand...
Click to collapse
I was trying to push GTALK 1.3 WITH VOICE & VIDEO in my mobile using root explorer....as far i remembr,first i changed the permisn in both SYSTEM/APP & SYSTEM/LIB to RWXRWXRWX....i cud push d APK FILE but failed to push the LIBRARY FILE(forgot d name)....it kept saying,"OPERATION FAILED". I tried it alot of tym bt stil same result. I assume then i somehow unmarked the write & execution option in permissns aftr i failed to proceed wd RWXRWXRWX set of permissions....and it hv to b in system/library folder. Aftr dat whn i exit,i saw system bcm unstable & i wasnt able to acess the apps requiring root acess.then i rebooted it,wich leaded to this.

dadada0717 said:
i think your motherboard is broken. mine is broken too and my warranty is not valid anymore. hope you can fix yours and mine too
Click to expand...
Click to collapse
broken motherboard?? Thn hw cud i go into my recovery & download mode (also can charge it)....its nt dead.just d booting isnt posible.

i had the same problem of restarting and when i flashed a new firmware it was giving error E:cannot mount..... see whether u get that error if u get that then ur internal memory may be corrupted

dexter.crackpot said:
broken motherboard?? Thn hw cud i go into my recovery & download mode (also can charge it)....its nt dead.just d booting isnt posible.
Click to expand...
Click to collapse
Not to be rude, but believe me, it seems like your dragging.
As most trusted contributors and experienced people here in this community have already told you to reflash. Please try that.
If you're able to charge(the green charging symbol appears), most probably you'd bee able to enter the download mode(vol down + home button + power button combo). You've not reported if you ever tried that.
Goto ddlf2 or xxkpu.
Still if you're not clear, please ask for a detailed guide. Would be happy to help

flash CF ROOT, and then access phone shell via "adb shell" while in recovery mode, then you can fix what you broke. CWM has adb enabled in most cases. If you just want it to boot again, you could simply flash from odin the whole rom, and then update via kies or another .tar rom and it will work normally again.
why dont you have CWM?, are you sure you are root?

dexter.crackpot said:
I was trying to push GTALK 1.3 WITH VOICE & VIDEO in my mobile using root explorer....as far i remembr,first i changed the permisn in both SYSTEM/APP & SYSTEM/LIB to RWXRWXRWX....i cud push d APK FILE but failed to push the LIBRARY FILE(forgot d name)....it kept saying,"OPERATION FAILED". I tried it alot of tym bt stil same result. I assume then i somehow unmarked the write & execution option in permissns aftr i failed to proceed wd RWXRWXRWX set of permissions....and it hv to b in system/library folder. Aftr dat whn i exit,i saw system bcm unstable & i wasnt able to acess the apps requiring root acess.then i rebooted it,wich leaded to this.
Click to expand...
Click to collapse
Is the lib file by chance, "libtalk_jni.so"? there are two possibilities that occur when you get operation failed. One is that your "/system" directory is full, install a deodex package and you should be good to go, no need for anything else. Problem is, I have never heard of I9003XWKPH update before or if they have a deodex package in our forums. The other, is that you had forgotten to "adb remount", but seeing that you had pushed the app and it had worked, means that it isn't this one. Since you did not push over the lib file, you needn't worry about it. Lib file changes are notorious for causing bootloops on our phone unless we Hexedit them, and even then its not always 100%

I had already replied to this guys pm asking him to flash the latest firmware for his region. But I suppose he is what his name suggests. He is just wasting our time here.
Sent from my GT-I9003 using xda premium

dexter.crackpot said:
broken motherboard?? Thn hw cud i go into my recovery & download mode (also can charge it)....its nt dead.just d booting isnt posible.
Click to expand...
Click to collapse
Sorry for the very late reply
its not really the motherboard who has the problem, it is the internal memory. The only thing to fix it is to replace the motherboard. And yes, even your internal mem./motherboard is broken, you can still access the recovery mode, download mode and charge it. To know If your internal mem./motherboard is really broken, go to recovery mode a nd when you get this message:
E: Can't mount /dev/block/mmcblk0p1
Click to expand...
Click to collapse
then your mem./motherboard is really broken. Good luck!
hope you can fix yours and mine too

Sorry man.....a communal riot broke up in my town & as a doc i had to go n serve ppl in a place wd no network...i came bk just today nd reflashed wd d new ddlf2 value pack....works amazing.thnx once again....hope u and othr bros are not offended....hv a great day
Sent from my GT-I9003 using xda app-developers app

{Waiting For Build #8}COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs

As Soon as Build #8 by derefas was updated i test that build and update the complete guide-->I'm also testing APEX-Sense rom,BulletproofFX so,i also add the guide for that...So, stay tuned
After development goes on sense base ROM's I see that most of people face problem regarding BOOT-LOOPS and confusion on some steps how to do that... .So,this post for those who get boot-loops and facing problem at the installation time...
(1) First to install sense 4 build #6 we need SD-ext partition.as deferas mention we need minimum 1 GB SD-ext(ext 4-->most preferable).
(2) To make partition i often use" Mini tool Partition Wizard" but what i figure out that partition make through Minitool is not recognized in TWRP recovery for me so what i do is as following....
(3) MOST RECOMMENDED--> First do a complete backup of your SD-card somewhere in your computer. OK now all set..we move step further..
(4) Now reboot in to recovery...for general i use application Rebooter (fast reboot){that is available free of cost on play store} through this you can simply directly reboot into recovery and for other cases we all know our default way to reboot in to recovery....
(5) After entering into recovery--> Advance settings --> Partitioned SD card --> now here REMEMBER one thing when we partition memory card through recovery it will fully format/delete all your data of SD card that's why i mention STEP-3 ---> select partition size 1024 Mb and swap size 0 and click ext 4 button for file system of SD-ext to set as ext 4....then enter(swipe for partition)...it will take 2-5 minutes...now you have created partition of ext 4 1024 Mb (1 GB)...now reboot once recovery...
(6) Mount your SD card through mount option and mount as USB storage...put your desire build zip file in the root of the folder....and unmount it...
(7) Now RECOMMENDED--> don't use super wipe for wiping all things..do it manually...---->CAREFULLY don't wipe External storage(SD-card) now one by one wipe all this things --> wipe CACHE/Dalvik Cache then SYSTEM then DATA then FACTORY RESET and last SD_EXT and .ANDROID SECURE...after this all steps you have complete clean device...
(8) Before install we need to figured out what need to mount or not...this is only for sense base ROMs
Case-1) Sense 4.0 build 1/2/3 --> mount cache and SD-ext
Case-2) Sense 4.0 build 4/5/6 --> no need to mount anything..(it will be automatically mounted at installation time...)REMEMBER-->don't unmount external storage(SD-card) it is by default check marked leave it as it is...
(9) Select install zip from SD card....choose file...
(10) After installation it will booted after start up tone leave it for 3-5 minute for stable device---> now unlock ring "There is possibility for after first time booting it will reboot 1/2/3 times because it is make work on script link your data to SD-ext and loading other stuffs....so be patient...don't be panic....
(11) Enjoy your little lucky Pico...
I assure that after following this detail guide you have successfully install your Sense 4.0...thank you for reading this guide...
"Don't FORGET to PRESS THANKS BUTTON"

.
gud work..aftr the release of sense roms Q&A section is filled with same qstns only....:good:

Help
Please put your comments here if you need any help....

Still finding difficulty...
I used the same method of installing but unfortunately when the rom gets installed and when the lock screen comes, at that time in the status bar it gives the error of customization setup and then the system goes on fast rebooting many times and then also it does not go in the customization setup neither starts the mobile for me.
please help...

Difficulty
ahmadmemon said:
I used the same method of installing but unfortunately when the rom gets installed and when the lock screen comes, at that time in the status bar it gives the error of customization setup and then the system goes on fast rebooting many times and then also it does not go in the customization setup neither starts the mobile for me.
please help...
Click to expand...
Click to collapse
Ok for you i figured out problem is that your sd-ext partition is not properly linked to sd-card..i think you need again wipe and installation procedure and then tell me and for error customization setup in status bar ignored it it is automatically disappear.,,,if any further problem comment below...

still not working for me
I wiped my whole system many times and tried the same method but still it's giving same error... and the rom is still not working for me..

ahmadmemon said:
I wiped my whole system many times and tried the same method but still it's giving same error... and the rom is still not working for me..
Click to expand...
Click to collapse
Sd card extensions often cause a lot of problems when not done right. My advice, if you can live without Sense, get CM9.1 build #9. Enough internal memory for a lot of apps when all installed apps are moved to the sd card using titanium backup. Really smooth ics rom great for daily use and with almost no bugs.

K55V said:
Sd card extensions often cause a lot of problems when not done right. My advice, if you can live without Sense, get CM9.1 build #9. Enough internal memory for a lot of apps when all installed apps are moved to the sd card using titanium backup. Really smooth ics rom great for daily use and with almost no bugs.
Click to expand...
Click to collapse
yes infact one can live without sense but i want stock ICS look..

ahmadmemon said:
yes infact one can live without sense but i want stock ICS look..
Click to expand...
Click to collapse
Well then, get CM9.1 as I said, no partitions needed, no hassles.
Don't forget to hit the Thanks button

Re: COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs
Well i'll try ur method and by the way ur using twrp recovery right lol i'm a bit noob in using english language ok anyway thnx for the advice of urs i'll try ur method and soon post the results
The Ahmed Dar
Sent from my HTC Explorer A310e using xda app-developers app

abhiparmar92 said:
Please put your comments here if you need any help....
Click to expand...
Click to collapse
Can u provide me the backup of your installed sensed rom ??..so that i can restore it for myself...will thiz procedure work for me?? since I m still unpossible to use the build #6.

well i'm still facing the problem
my phone stuck on htc logo everytime

Freezed on quietly brilliant on 1st boot
saadahmeddar said:
well i'm still facing the problem
my phone stuck on htc logo everytime
Click to expand...
Click to collapse
same with me...
1) partitioned sd in ext4(1024mb) and rest 6gb available
2) copied HSBUILD6.zip
3) installed CWM recovery
4) factory reset
4) installed through zip file (flashed the rom)
5) rebooted the phone
6) At first only HTC logo is displayed, and after roughly 20-25secs htc quietly brilliant and beats audio is displayed with the startup sound and then the phone Freezes.
-tried remounting the battery and starting again several times ->nothing
-booted into recovery ->facttory reset-> flashed again -> nothing (3 times)
-tried http://forum.xda-developers.com/showthread.php?t=1660596 chapter 1 -> after flashin a new rom both options -> nothing
the same Freeze problem still persists. please HELP please

loops !!!
Ok tried this trick, worked like a Charm
http://forum.xda-developers.com/showpost.php?p=37582196&postcount=13
boot problem solved and phone successfully started
Now screen and touch controls respond lock and unlock function working
But as soon as you unlock -> Processing -> white screen flash -> Processing loop starts endlessly..
tried normal powering off -> re-popping the battery -> start the phone -> but same processing and white screen flashes
what am I doing wrong??
Edit:
-Calls can be recieved hence can be made
-settings can be accessed indirectly but crashes if tried to access some of the menu's
-Notification panel does not open
-no automatic restarts

Re: COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs
I don't know why you guys facing this problems like freeze at HTC beats audio,processing....I think something is going wrong....currently I have no solution I'm working on it....but till that contact and PM deferas your problems.....
Suggestion--> for frezzing issues guys after first booting if it freeze leave it as till 15 minute because it may be link your sd-ext with system.....successfully complete booting varies due to your memory partition sectors....if your memory card have some bad memory sector then also this happened.....
Sent from my HTC Explorer using xda premium

Re: COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs
Just needed to re-flash the rom..
Running fine and dandy..
Sent from my WT19i using xda app-developers app

Re: COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs
vaibhavgd said:
Just needed to re-flash the rom..
Running fine and dandy..
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Yes it also may be solve issues....I prefer clean install....
Sent from my HTC Explorer using xda premium

Re: COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs
I think derefas's latest upcoming update solve all your reboot and other issues....
Sent from my HTC Explorer using xda premium

Re: COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs
I don't know but when ibtry to flash build 6 with twrp my phone doesn't boot but when I do it from cmw , it does .confusing
Sent from my HTC Explorer using xda app-developers app

Re: COMPLETE GUIDE ON INSTALLATION OF SENSE 4.0 ROMs
sneakerspark said:
I don't know but when ibtry to flash build 6 with twrp my phone doesn't boot but when I do it from cmw , it does .confusing
Sent from my HTC Explorer using xda app-developers app
Click to expand...
Click to collapse
Hmmm lucky
Sent from my HTC Explorer using xda premium