@MODS_ALL
I need ur help guys to fix my phone which was in I9003JPKP5! i tried to flash it to 2.2.1 I9003XWKB1 and the flashing stopped in modem.bin! phone vibrates and blue screen when i press POWERON now!
then i tried this file from this thread;
http://forum.xda-developers.com/showthread.php?t=1387867
but now the phone stops at .sbl file always with what ever combination i flash!
a good part and a light of hope is the phone goes in download mode and recovery as well! so need your help guys to get this phone going as before!
WBR
ReyTech.
why did you try to go backwards from GB to Froyo?
if you weren't really intending to go backwards, then start with kpe. after downloading the kpe file, use pit ONLY FIRST, then when done, remove battery, reinsert and go to download again and flash all of kpe, then kph, then kpq.
if you were intending to go to froyo, I don't know if a pit file is necessary first, but how are you getting errors in odin? is there any interruption during the process?
supergaijin said:
why did you try to go backwards from GB to Froyo?
if you weren't really intending to go backwards, then start with kpe. after downloading the kpe file, use pit ONLY FIRST, then when done, remove battery, reinsert and go to download again and flash all of kpe, then kph, then kpq.
if you were intending to go to froyo, I don't know if a pit file is necessary first, but how are you getting errors in odin? is there any interruption during the process?
Click to expand...
Click to collapse
You needs a pit file when going back to froyo..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
ReyTech said:
@MODS_ALL
I need ur help guys to fix my phone which was in I9003JPKP5! i tried to flash it to 2.2.1 I9003XWKB1 and the flashing stopped in modem.bin! phone vibrates and blue screen when i press POWERON now!
then i tried this file from this thread;
http://forum.xda-developers.com/showthread.php?t=1387867
but now the phone stops at .sbl file always with what ever combination i flash!
a good part and a light of hope is the phone goes in download mode and recovery as well! so need your help guys to get this phone going as before!
WBR
ReyTech.
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=1133787
Use this link to flash xxkpe twice and then xxkpq
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
sirilpta said:
You needs a pit file when going back to froyo..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
is the pit from kpe the same one needed to flash froyo? and before we try to push him to keep GB, he should respond about why he wanted to go backwards (maybe because of the push notification bug?)
supergaijin said:
is the pit from kpe the same one needed to flash froyo? and before we try to push him to keep GB, he should respond about why he wanted to go backwards (maybe because of the push notification bug?)
Click to expand...
Click to collapse
Ya the pit is the same for both
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
The pit is not the same for froyo and gb...namely XXKB3 uses a pit file but has 3 files to choose where as a XXKPE has a 4th file which is a bootloader
@sirilpta change your annoying signature man!!
Sent from my GT-I9003 using XDA App
ronhoover88 said:
The pit is not the same for froyo and gb...namely XXKB3 uses a pit file but has 3 files to choose where as a XXKPE has a 4th file which is a bootloader
@sirilpta change your annoying signature man!!
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
I will change it
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
supergaijin said:
is the pit from kpe the same one needed to flash froyo? and before we try to push him to keep GB, he should respond about why he wanted to go backwards (maybe because of the push notification bug?)
Click to expand...
Click to collapse
@supergaijin
thanks guys for your rplies i shall follow the instructions and see what happens and then let u know, well the reason i wanted to goback was i wanted a european portuguese and the phone had arabic in it! so the reason i tried going back blindly!
WBR
ReyTech.
sirilpta said:
If my signature is annoying you, then there is only one way to get rid of it
.............................................................
AVOID LOOKING AT MY SIGNATURE
...........................................;;;;;;;;;;;;;;;;;
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
i think ronhoover want to say that ur post always show two signature at the same time. One main signature where i9003 picture is there (this is ok). But after every post the following line is always repeated which looks not good.
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
Dont take me wrong way. Just with good intention I am telling u bro
vishal24387 said:
i think ronhoover want to say that ur post always show two signature at the same time. One main signature where i9003 picture is there (this is ok). But after every post the following line is always repeated which looks not good.
Dont take me wrong way. Just with good intention I am telling u bro
Click to expand...
Click to collapse
I think half is the signature of xda and half is the signature of xda premium application. Will correct it immediately..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
sirilpta said:
I think half is the signature of xda and half is the signature of xda premium application. Will correct it immediately..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
guys! can u pls stick to the topic! i need help in fixing my phone and not dressup you postings!
ive followed the instructions to flash from kpe to kph to kpq but the problem is when i first flash the kpe after the .pit, it stops again at the .sbl file after sucessfully flashing the boot.img! so its back to square 1!
pls anything else?
WBR
ReyTech.
ReyTech said:
guys! can u pls stick to the topic! i need help in fixing my phone and not dressup you postings!
ive followed the instructions to flash from kpe to kph to kpq but the problem is when i first flash the kpe after the .pit, it stops again at the .sbl file after sucessfully flashing the boot.img! so its back to square 1!
pls anything else?
WBR
ReyTech.
Click to expand...
Click to collapse
Check the md5 sum of the downloaded xxkpe file and also others. You need to go through xxkpe to xxkpq no need to flash xxkph
Sent from my GT-I9003
ReyTech said:
guys! can u pls stick to the topic! i need help in fixing my phone and not dressup you postings!
ive followed the instructions to flash from kpe to kph to kpq but the problem is when i first flash the kpe after the .pit, it stops again at the .sbl file after sucessfully flashing the boot.img! so its back to square 1!
pls anything else?
WBR
ReyTech.
Click to expand...
Click to collapse
so you flashed the pit by itself, then disconnected the phone, removed the battery, reinserted the battery and went into download mode again without issues, but then kpe failed at the .sbl? the only thing I can think of are: 1) like sirilpta said, check the md5, or re-download the files, and ensure they are the proper size. I've had files fail at close to 100% completion with only a tiny bit of data missing, but that's all it takes to fail, and 2) something wrong with your phone. so, check the files and redownload them if necessary to make sure they're the proper size first and let us know how it goes.
Related
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
password : samfirmware.com
enjoy
haree said:
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
enjoy
Click to expand...
Click to collapse
did you try this?
And yeah password : samfirmware.com
rudolf895 said:
did you try this?
And yeah password : samfirmware.com
Click to expand...
Click to collapse
no buddy i did not and yes pass word is as u had mentioned
haree said:
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
password : samfirmware.com
enjoy
Click to expand...
Click to collapse
Hey haree, I am from India. I still haven't flashed Froyo on my phone still using stock 2.1. I was thinking of flashing XXJPM. Should i go ahead with that or should i try the XWJPF??
android_murphy said:
Hey haree, I am from India. I still haven't flashed Froyo on my phone still using stock 2.1. I was thinking of flashing XXJPM. Should i go ahead with that or should i try the XWJPF??
Click to expand...
Click to collapse
hi
i think u have not done ur reading their is already an official update from samsung in india it is DDJP2 u can update via kies or go to the below link and take it from my drop box u can flash this via odin
Link : http://dl.dropbox.com/u/10031257/I5801DDJP2.rar
password : samfirmware.com (flash this via odin as a onepack)
haree said:
hi
i think u have not done ur reading their is already an official update from samsung in india it is DDJP2 u can update via kies or go to the below link and take it from my drop box u can flash this via odin
Link : http://dl.dropbox.com/u/10031257/I5801DDJP2.rar
password : samfirmware.com (flash this via odin as a onepack)
Click to expand...
Click to collapse
Oh i know that is available. But it's just that it has too many issues with it right now: Swype not working, FCs, Crackling sounds in audio, etc. So i wanted to flash a FW that is stable.
So i asked around a bit and found out that JPM is the most stable. But then i saw on samfirmware that they released XWJPF like 12 days back. And i haven't found anyone who has used it so far to get their input. So was just wondering which one to flash.
PS - never flashed a FW before, but been reading enough for the past two days to be comfortable enough to try it.
well i wud suggest u go for i5801 zhjpf......its the only rom which dont have the choppy call bug.
android_murphy said:
Oh i know that is available. But it's just that it has too many issues with it right now: Swype not working, FCs, Crackling sounds in audio, etc. So i wanted to flash a FW that is stable.
So i asked around a bit and found out that JPM is the most stable. But then i saw on samfirmware that they released XWJPF like 12 days back. And i haven't found anyone who has used it so far to get their input. So was just wondering which one to flash.
PS - never flashed a FW before, but been reading enough for the past two days to be comfortable enough to try it.
Click to expand...
Click to collapse
hi
i have used DDJP2 for a long time more than 2 weeks except for the swype not working(i dont use it so im OK) i have faced no problems at all as u have not flashed any rom till date id suggest u try flashing this vie kies and then decide what u want latter on
goodluck happy flashing
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
hi
i dont understand ur internet problem
but if u want to flash via odin read the link given below in detail before attempting anything via odin off ur virus scan while using odin and log in as admin while using odin
Link : http://forum.xda-developers.com/showthread.php?t=873645
yes their is the risk but i have flashed the same a few time in the last week
i had no problem but the risk is urs i dont know how to remove the boot & sbin sorry i cant help u their
and yes u will loose ur phone data so back up ur data before proceeding to flash the rom
goodluck
android_murphy said:
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
Click to expand...
Click to collapse
haree said:
hi
i dont understand ur internet problem
but if u want to flash via odin read the link given below in detail before attempting anything via odin off ur virus scan while using odin and log in as admin while using odin
Link : http://forum.xda-developers.com/showthread.php?t=873645
yes their is the risk but i have flashed the same a few time in the last week
i had no problem but the risk is urs i dont know how to remove the boot & sbin sorry i cant help u their
and yes u will loose ur phone data so back up ur data before proceeding to flash the rom
goodluck
Click to expand...
Click to collapse
did all of that... flashed using odin ... got a PASS ... wasn't booting for 50 mins (stuck at samsung glowing flash logo, so someone suggested rebooting and wipe cache/data ... but when i pressed power + home + volume up ... it showed a screen - "Forced Upload by Key Pressing" with an android logo next to it... nothing was happening so i booted again and now stuck at the GT-I5801 logo... Please help ... Please tell me my phone isn't bricked...
Don't worry but press vol up+ vol down + home + power
Get to recovery and wipe data and cache .
Sent from my GT-I5800 using Tapatalk
android_murphy said:
did all of that... flashed using odin ... got a PASS ... wasn't booting for 50 mins (stuck at samsung glowing flash logo, so someone suggested rebooting and wipe cache/data ... but when i pressed power + home + volume up ... it showed a screen - "Forced Upload by Key Pressing" with an android logo next to it... nothing was happening so i booted again and now stuck at the GT-I5801 logo... Please help ... Please tell me my phone isn't bricked...
Click to expand...
Click to collapse
hi
u have to be on DDJ6(ie original asia india 2.1) while flashing this or it wont work
assuming u are talking about DDJP2
I´ve flashed it yesterday and not perceived differences with JPM yet
android_murphy said:
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
Click to expand...
Click to collapse
just flash it man
the probablility of bricking is as low as burning yourself with a smoke
It didn't boot for me until I flashed JG6 eclair ROM first.
Can't see much difference to JPM.. except that It's missing finnish language. Has all of the slavic languages, though.
Pinak.ahuja said:
Don't worry but press vol up+ vol down + home + power
Get to recovery and wipe data and cache .
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "
with some other stuff also
android_murphy said:
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "
with some other stuff also
Click to expand...
Click to collapse
hi
we are really going off topic ill delete all the off topic once ur problem is solved
wipe data will not take more than a few mins the same screen will say wipe factory data finished or try pulling out ur batter putting it back(this worked for me once) in and then go to download mode and flash the original 2.1 again if successful then go back in to download mode and flash the 2.2
hope it helps
android_murphy said:
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "
with some other stuff also
Click to expand...
Click to collapse
That means It's stuck. Should take about ~2 mins at max.
Flash eclair JG6 first, and then this one. Password is samfirmware.com
thanx all for helping ... finally got irritated ... flashed JG6 and then JPM ... working sweet ... JP2 can rot in hell ...
when i switch on my samsung galaxy SL I9003 my phone gets hand on the screen where SAMSUNG is written.. i tried by restarting the mobile but its not working...
re-inserting battery is also not working... about a month ago i rooted my phone with super one click.. Please Help me
Siddharth
Samsung Galaxy SL I9003
Android 2.2 Froyo
Rooted: Super One Click
you have to reflash the firmware again
sid2gud said:
when i switch on my samsung galaxy SL I9003 my phone gets hand on the screen where SAMSUNG is written.. i tried by restarting the mobile but its not working...
re-inserting battery is also not working... about a month ago i rooted my phone with super one click.. Please Help me
Siddharth
Samsung Galaxy SL I9003
Android 2.2 Froyo
Rooted: Super One Click
Click to expand...
Click to collapse
What did you do?
Sent from my GT-I9100 using xda premium
Go to Recovery mode (switch off your phone, then Press Volume UP + Home + Power) and do a factory reset.
nothing... my fone battery drained out and my mobile switched... after that when i tried to switch it on ... its not working hand hanging on the boot screen...
rohit_rocks said:
Go to Recovery mode (switch off your phone, then Press Volume UP + Home + Power) and do a factory reset.
Click to expand...
Click to collapse
it will not fix it
tarunagg said:
it will not fix it
Click to expand...
Click to collapse
then what to do... plz help me
sid2gud said:
nothing... my fone battery drained out and my mobile switched... after that when i tried to switch it on ... its not working hand hanging on the boot screen...
Click to expand...
Click to collapse
so, after rooting one month ago, you've never done any other testing, no firmware flashing, etc., and all of a sudden, after your battery dies, as it's prone to do, it quit working?
if this is the case, have you tried another battery, either another you may own, from someone else's phone, or even take it to a service center just to see if a different battery works?
otherwise, one of the things you flashed (or may have been flashing at the time your phone died) screwed something up. give us more details, please
Told you just flash any rom
sid2gud said:
then what to do... plz help me
Click to expand...
Click to collapse
Sent from my GT-I9003 using XDA App
How bout flashing to gingerbread xxkpe + xxkph 2.3.4
Sent from my GT-I9003 using xda premium
supergaijin said:
so, after rooting one month ago, you've never done any other testing, no firmware flashing, etc., and all of a sudden, after your battery dies, as it's prone to do, it quit working?
if this is the case, have you tried another battery, either another you may own, from someone else's phone, or even take it to a service center just to see if a different battery works?
otherwise, one of the things you flashed (or may have been flashing at the time your phone died) screwed something up. give us more details, please
Click to expand...
Click to collapse
i dint did any thing like that... it was all of sudden.... i even tried different battery... but that is also not working... i think i have to reflash my mobile....
if you could please tell me the steps of reflashing it to 2.3.4... please... n from where i will get that...
i m newbie to this... please guide me...
rohit_rocks said:
Go to Recovery mode (switch off your phone, then Press Volume UP + Home + Power) and do a factory reset.
Click to expand...
Click to collapse
tarunagg said:
it will not fix it
Click to expand...
Click to collapse
When i was a newbie, i did the same thing, and my phone get started. Posted the similar problem on 15th July 2011 (Stuck at samsung logo ) :
http://forum.xda-developers.com/showthread.php?t=1170131
sid2gud said:
i dint did any thing like that... it was all of sudden.... i even tried different battery... but that is also not working... i think i have to reflash my mobile....
if you could please tell me the steps of reflashing it to 2.3.4... please... n from where i will get that...
i m newbie to this... please guide me...
Click to expand...
Click to collapse
just follow this thread:- http://forum.xda-developers.com/showthread.php?t=1004647
this is the guide:- http://forum.xda-developers.com/showthread.php?t=1133787
choose i9003xxkph
** if u want to flash ur phone to gb 2.3.4 xxkph, first u need to flash with xxkpe firmware
hope this will help u
supergaijin said:
so, after rooting one month ago, you've never done any other testing, no firmware flashing, etc., and all of a sudden, after your battery dies, as it's prone to do, it quit working?
if this is the case, have you tried another battery, either another you may own, from someone else's phone, or even take it to a service center just to see if a different battery works?
otherwise, one of the things you flashed (or may have been flashing at the time your phone died) screwed something up. give us more details, please
Click to expand...
Click to collapse
i reflashed my mobile to 2.3.4 KPE... it was all done sucess fully with odin .... no phone is restarting again n again n showing KERNAL PANIC UPLODE MODE.... plz tell me what to do...
did u follow the instruction correctly?
flash xxkpe and then xxkph?
see my video in youtube
http://www.youtube.com/watch?v=6l6hTuWWjLE&feature=related
AmirolAhmad said:
How bout flashing to gingerbread xxkpe + xxkph 2.3.4
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
i flashed my mobile to 2.3.4 xxkpe but after it the phone has stuck in to infine loop of booting and at last its showing kernal panic upload mode...
i really dont know what to do
sid2gud said:
i flashed my mobile to 2.3.4 xxkpe but after it the phone has stuck in to infine loop of booting and at last its showing kernal panic upload mode...
i really dont know what to do
Click to expand...
Click to collapse
i updated to xxkph then also the same error is coming again n again.... i m helpless... please refer me some 2.2.1 rom
sid2gud said:
i updated to xxkph then also the same error is coming again n again.... i m helpless... please refer me some 2.2.1 rom
Click to expand...
Click to collapse
there's a stickied thread on the first page of the forum for that
u can recover ur phone as long it goes into download mode
u can try flashing XXKB3 first...its most stable of 9003
sid2gud said:
i updated to xxkph then also the same error is coming again n again.... i m helpless... please refer me some 2.2.1 rom
Click to expand...
Click to collapse
I am sure that u must be doing some mistake while flashing. Please refer guids of flashing properly
After I got an original ROm(firmware) 2.3.5 DXKP9 from the Samsung service center(Thailand) my GPS working properly without any problem !!
Once again I rooted my device and install new ROM to XXKPQ my GPS a bit strange !! such as... I am live in Nonghaem area... but it shows my current location for another area which about 20 km far away.
And yesterday I went to Pattaya City which is about 140 Km. far away from bangkok. After I reached to my home in BKK and try to check my GPS again.
My curent location was in Pattay City !! oh my god ..now Im in BKK but show my current position in Pattaya !!
After that I try to install another ROM XXKPE/XXKPH
Finally, my GPS doesn't work anymore. I have tried so many time but its said that
" Your current Location is temporarily unavailable "
What does it mean ?
Please help me how to fix this.
*** One thing it also doesn't work on any app. such as cureent temperature *** I thought my GSP doesn't on any app. which is need to use GPS as a detector****
thank you
sitbkkthailand said:
After I got an original ROm(firmware) 2.3.5 DXKP9 from the Samsung service center(Thailand) my GPS working properly without any problem !!
Once again I rooted my device and install new ROM to XXKPQ my GPS a bit strange !! such as... I am live in Nonghaem area... but it shows my current location for another area which about 20 km far away.
And yesterday I went to Pattaya City which is about 140 Km. far away from bangkok. After I reached to my home in BKK and try to check my GPS again.
My curent location was in Pattay City !! oh my god ..now Im in BKK but show my current position in Pattaya !!
After that I try to install another ROM XXKPE/XXKPH
Finally, my GPS doesn't work anymore. I have tried so many time but its said that
" Your current Location is temporarily unavailable "
What does it mean ?
Please help me how to fix this.
...
*** One thing it also doesn't work on any app. such as cureent temperature *** I thought my GSP doesn't on any app. which is need to use GPS as a detector****
thank you
Click to expand...
Click to collapse
you followed all instructions about wiping caches properly when you updated? what were your exact steps?
My steps !!!
after finished install ROM from odin(DXKP9 ** i try to flash ROM back to an official rom)
then i go to recovery mode wipe data/factory reset follow by wipe cache padition
after thae reboot system !!
Any idia Sir ?
sitbkkthailand said:
after finished install ROM from odin(DXKP9 ** i try to flash ROM back to an official rom)
then i go to recovery mode wipe data/factory reset follow by wipe cache padition
after thae reboot system !!
Any idia Sir ?
Click to expand...
Click to collapse
had to do some research, don't have all versions memorized
"2. I9003XXKP9
WARNING: DEV VERSION | NOT AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: YES, less bugs compared with XXKP7
so, you are not on a well-developed rom, even if you got it from a service center (unless the change from xx to dx denotes that it's fully official now). and how did you try to go from kp9 to kpq? direct? or, did you follow the steps properly, and go pit, pe, kph, kpq?
Sir, form DXKP9 to XXKPQ I did by install Galaxy V.5 ROM http://forum.xda-developers.com/showthread.php?t=1313079
Then my device changed to XXKPQ automaticly !!
But even I changed my device to orginall official ROM DXKP9 ... my GPS still doesn't work !!
( I've installed DXKP9 witout PIT file because the link to file download bring me to this " I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.rar " There is only one file !! there is no PDA/PHONE/BOOTLoader/CSC file) so i just put I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.rar in PDA and start it !!
Shall I put I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.rar in PDA and also put PIT in the same step ? and tick re-partition ????
sitbkkthailand said:
Sir, form DXKP9 to XXKPQ I did by install Galaxy V.5 ROM http://forum.xda-developers.com/showthread.php?t=1313079
Then my device changed to XXKPQ automaticly !!
But even I changed my device to orginall official ROM DXKP9 ... my GPS still doesn't work !!
( I've installed DXKP9 witout PIT file because the link to file download bring me to this " I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.rar " There is only one file !! there is no PDA/PHONE/BOOTLoader/CSC file) so i just put I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.rar in PDA and start it !!
Shall I put I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.rar in PDA and also put PIT in the same step ? and tick re-partition ????
Click to expand...
Click to collapse
see? you can't just flash a custom rom (galaxy v5 is not a stock rom)! you must flash stock first!
since dxkp9, as you stated, is apparently 2.3.5, then you should be able to, from there, have gone to kpq and then flash galaxy. since you're already there, why not try that instead of starting with kpe.
so: from dxkp9, flash STOCK kpq PDA, then deodex, then flash galaxy.
if it doesn't work right, you can be sure this will: flash pit, kpe ONCE, kph ONCE, kq ONCE, then deodex, then galaxy. and don't forget to install cfroot to back up your phone! happy flashing!
supergaijin said:
see? you can't just flash a custom rom (galaxy v5 is not a stock rom)! you must flash stock first!
since dxkp9, as you stated, is apparently 2.3.5, then you should be able to, from there, have gone to kpq and then flash galaxy. since you're already there, why not try that instead of starting with kpe.
so: from dxkp9, flash STOCK kpq PDA, then deodex, then flash galaxy.
if it doesn't work right, you can be sure this will: flash pit, kpe ONCE, kph ONCE, kq ONCE, then deodex, then galaxy. and don't forget to install cfroot to back up your phone! happy flashing!
Click to expand...
Click to collapse
Thank You sir, I will try to get back to DXKP9 first then XXKPE with PIT and then XXKPH > XXKPQ
*** one Quest !! follow this thread http://forum.xda-developers.com/showthread.php?t=1133787
Can I start from DXKP9 > XXKPE and then XXKPQ ?
because the thread just say that flash XXKPE once with PIT /PDA/Phone/CSC/Bootloader then follow by XXKPQ ROM !!!
It works but not properly !!!!
It works now sir, but seems that not properly !!
because it doesn't show me an actual current location !!
My home is in Nongkhaem area(you can see above pic) but GPS shows me the current location in Klong Toei area which is about 25 km. far away from my HOme.
What's this happened, sir ? any idea to fix it ?
Thank you sir.
download gps aids and fasterfix from market.
open fasterfix and change the NTP server to your country/continent
open gps and follow onscreen instructions
it might help to solve your bug
sitbkkthailand said:
It works now sir, but seems that not properly !!
because it doesn't show me an actual current location !!
My home is in Nongkhaem area(you can see above pic) but GPS shows me the current location in Klong Toei area which is about 25 km. far away from my HOme.
What's this happened, sir ? any idea to fix it ?
Thank you sir.
Click to expand...
Click to collapse
you moved faster than I could respond, lol
first, the simplest thing to do is install an app from the market, called gps test, and tell me how many satellites you get locked at the time your gps is reporting your location inaccurately. after that, if you don't mind trying again, flash again because you skipped a step
yes, just like the guide says, you can go directly from kpe to kpq, but I read about people having issues like that. I read that other people didn't when they put at least one other good fw in between the two (like kph). so, when I upgraded from kph to kpq, I went backwards first, and flashed pit, kpe, kph, kpq, and didn't have any problems at all. that's why always recommend the steps like I do
How to use GPS test,Sir ?
How do I know how many has been locked .... something like that ?
I don't know what to do ? where should I press a bottoms ?
I have found these !!!
sitbkkthailand said:
How to use GPS test,Sir ?
How do I know how many has been locked .... something like that ?
I don't know what to do ? where should I press a bottoms ?
I have found these !!!
Click to expand...
Click to collapse
yes, that is the app. are those your actual screen shots? how long d you let it stay on for before capturing those pics? if it's more than 1 min, then yes, your gps is still messed up, so try reflashing. follow the order I recommended this time
Thank You sir !
Thank You very much ,sir !!
I've tried to reflash XXKPQ ROM twice !! but seems that my GPS has some problem.
I open google map app. then my current location shows on map still now in my actual current location.
but, once i closed google map then turn GPS off and turn it on again then open google map.. Yes my current location is an actual one !!
but seems not to be stable .... lol once i close app. and open it again and tried to detected my location again !! Oh no !! change to another area again !! not properly again ha ha !! I am so tired !! then.... i will forget to fix it lol
Thank you sir for you help
sitbkkthailand said:
Thank You very much ,sir !!
I've tried to reflash XXKPQ ROM twice !! but seems that my GPS has some problem.
I open google map app. then my current location shows on map still now in my actual current location.
but, once i closed google map then turn GPS off and turn it on again then open google map.. Yes my current location is an actual one !!
but seems not to be stable .... lol once i close app. and open it again and tried to detected my location again !! Oh no !! change to another area again !! not properly again ha ha !! I am so tired !! then.... i will forget to fix it lol
Thank you sir for you help
Click to expand...
Click to collapse
well, if you've flashed from STOCK kpe (PIT AND ALL FILES) through STOCK kph to STOCK kpq twice, then yeah, I'm at a loss. but, you didn't say you restarted from pit, just that you reflashed kpq twice. did you start from pit or not?
YES
YES , sir
I start from DXKP9> XXKPE by installed PIT PDA/PHONE/Bootloader/CSC > XXKPH>XXKPQ them CROM
sitbkkthailand said:
YES , sir
I start from DXKP9> XXKPE by installed PIT PDA/PHONE/Bootloader/CSC > XXKPH>XXKPQ them CROM
Click to expand...
Click to collapse
you missed a spot
I start from DXKP9> XXKPE by installed PIT PDA/PHONE/Bootloader/CSC > XXKPH>XXKPQ then add cfroot and deodex them CROM
sorry, it's partly my fault but I thought you'd read a few other threads about installing croms and such
supergaijin said:
you missed a spot
I start from DXKP9> XXKPE by installed PIT PDA/PHONE/Bootloader/CSC > XXKPH>XXKPQ then add cfroot and deodex them CROM
sorry, it's partly my fault but I thought you'd read a few other threads about installing croms and such
Click to expand...
Click to collapse
How to deodex my SL I9003 please... Is it easy to install then ?
I need step by step lol
sitbkkthailand said:
How to deodex my SL I9003 please... Is it easy to install then ?
I need step by step lol
Click to expand...
Click to collapse
since you're familiar with odin now, this won't take long to do.
first, make a fresh install of kpq (pit, kpe, etc), just to be sure nothing will conflict with what you've already done.
then, flash cfroot. this is the one I use. an additional option would be to install utter chaos's kernel from here. then wipe the caches and make a backup before doing anything else. additionally, you can "pause" your upgrades and run your phone and install a gps app like gps test to make sure your gps is working before continuing.
if the frst cfroot gives you problems, flash this one instead. make sure to use the first link, since it's improved and already includes the kernel mods from utter chaos. then wipe the caches and make a backup before doing anything else. additionally, you can "pause" your upgrades and run your phone and install a gps app like gps test to make sure your gps is working before continuing.
then, deodex here.
then, you're ready for galaxy v5 w/working gps
make sure to read carefully and understand before flashing, but you shouldn't have any issues since you have some practice. good luck!
I have a Samsung Galaxy SL I9003 that I upgraded (and rooted) to Gingerbread I9003 XXKPH. I was wondering if there is any way to update to Ice Cream Sandwich 4.0 or at least to Gingerbread 2.3.6 (mine is 2.3.4). And if only an upgrade to Gingerbread 2.3.6 is possible, what are the benefits?
http://bit.ly/t9V92T
http://bit.ly/umK4W5
google is your friend (so is the searchbox on top of this page)
As impressive as that was, I already googled both, and I'm currently making my way through the results. But, I don't seem to be making any progress with the ICS search.
ahmedrady459 said:
As impressive as that was, I already googled both, and I'm currently making my way through the results. But, I don't seem to be making any progress with the ICS search.
Click to expand...
Click to collapse
there is no ICS for I9003, and there will never be an official one, so dont bother with it
Who said anything about official?
ahmedrady459 said:
Who said anything about official?
Click to expand...
Click to collapse
ok... let me re-phrase... there is currently no ICS for I9003, there might be a compiled source for it sometime in the future (or maybe even is judging by search results). however, most stuff wouldnt work, and would need the work of a dedicated developer who owns a I9003, which we dont have (and even then would be buggy as hell)!
the obvious point still stands... dont bother
Fair enough. Thanks!
ahmedrady459 said:
I have a Samsung Galaxy SL I9003 that I upgraded (and rooted) to Gingerbread I9003 XXKPH. I was wondering if there is any way to update to Ice Cream Sandwich 4.0 or at least to Gingerbread 2.3.6 (mine is 2.3.4). And if only an upgrade to Gingerbread 2.3.6 is possible, what are the benefits?
Click to expand...
Click to collapse
Read this man :http://forum.xda-developers.com/showthread.php?t=1133787
So this means that if I have XXKPH, I must first flash XXKPE and then flash XXKPQ which is the latest one?
ahmedrady459 said:
So this means that if I have XXKPH, I must first flash XXKPE and then flash XXKPQ which is the latest one?
Click to expand...
Click to collapse
yes, exactly
reason: KPE is a full ROM (with bootloader, PDA etc) so can be seen as "base" for future roms, all other roms only have 1 PDA file
umarian said:
Read this man :http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
I followed the instructions exactly for flashing XXKPE and it said in the Odin message box: Can't open the Serial(COM) Port
and then Fail.
ahmedrady459 said:
I followed the instructions exactly for flashing XXKPE and it said in the Odin message box: Can't open the Serial(COM) Port
and then Fail.
Click to expand...
Click to collapse
you need to have samsung drivers installed...
install samsung kies and connect the phone once via kies
then try flashing again, i think that should solve your problem
Actually I managed to fix it just by flashing the pit file with all the others (pda, phone, etc.) together i.e. at the same time and that worked. I also managed to flash XXKPQ right afterwards. Currently using your brilliant idea of a Google search to root XXKPQ!
Thanks
Use the universal cf-root from this forum! Comes with updated cwm, binary, Superuser and of course root.
http://forum.xda-developers.com/showthread.php?t=1351056
Sent from my GT-I9003
ahmedrady459 said:
Actually I managed to fix it just by flashing the pit file with all the others (pda, phone, etc.) together i.e. at the same time and that worked. I also managed to flash XXKPQ right afterwards. Currently using your brilliant idea of a Google search to root XXKPQ!
Thanks
Click to expand...
Click to collapse
Install uc kernal v7 which comes with root, cwm,
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Jack_Random said:
Use the universal cf-root from this forum! Comes with updated cwm, binary, Superuser and of course root.
http://forum.xda-developers.com/showthread.php?t=1351056
Sent from my GT-I9003
Click to expand...
Click to collapse
Which file exactly do I use? There are 5 different ones listed in the attached files part of the post.
Also, do I just flash it as PDA?
And do I have to do Wipe data/Factory Reset and Wipe Cache afterwards?
ahmedrady459 said:
Which file exactly do I use? There are 5 different ones listed in the attached files part of the post.
Also, do I just flash it as PDA?
And do I have to do Wipe data/Factory Reset and Wipe Cache afterwards?
Click to expand...
Click to collapse
Use the file dated 17-12-2011 and flash it using odin as pda
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
And do I need to do a factory reset and wipe cache afterwards?
ahmedrady459 said:
And do I need to do a factory reset and wipe cache afterwards?
Click to expand...
Click to collapse
If you have any problem after flashing do a factory reset and wioe cache.. Otherwise nothing to do.. Most probably nothing happens..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Okay it worked fine but now, when I connect my phone to the usb the computer doesn't read the phone at all. Also, the phone doesn't recognize that it was plugged into the usb.
I tried my phone to flash with the custom rom.. using PIT file "s1_odin_20100512" my phne is completely dead..! Its not even getting charged..!! nothing is happening..!! please some 1 help me..!! pls i beg u for that...!! thanks a tons in advance
deeprathod said:
I tried my phone to flash with the custom rom.. using PIT file "s1_odin_20100512" my phne is completely dead..! Its not even getting charged..!! nothing is happening..!! please some 1 help me..!! pls i beg u for that...!! thanks a tons in advance
Click to expand...
Click to collapse
Instead of asking, you could click search button
http://forum.xda-developers.com/showthread.php?t=1886393
No solution
frzek said:
Instead of asking, you could click search button
http://forum.xda-developers.com/showthread.php?t=1886393
Click to expand...
Click to collapse
I have de same problem complete dead.
This is not the solution
No download nothing at all after using the pit file with odin.
and i used the search button:crying:
I got i9000 dead too.. using exactly the same pit file in odin... now the phone wont boot and stuuf like that..
Well, I DO HAVE a solution for this, that is a hardware fix, draining ICs and shorting some capacitors on board will force the phone to go into Download Mode, will try it tomorrow in lab, if it goes fine, I will let you guys know.
Thanks