Database Info

Please help

I am trying to flash cwm and am currently stock but everytime I try out says the sdcard/update.zip doesn't exist even though I thought I moved the file to the sd card I am probably doing something wrong like didn't send the file to the right place and the answer is probably a very obvious one but would still appreciate It if someone could tell me how to do this
Sent from my SCH-I500 using XDA Premium App

Mopuzi said:
I am trying to flash cwm and am currently stock but everytime I try out says the sdcard/update.zip doesn't exist even though I thought I moved the file to the sd card I am probably doing something wrong like didn't send the file to the right place and the answer is probably a very obvious one but would still appreciate It if someone could tell me how to do this
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Using the update.zip method is for an old version of CWM - get yourself the .tar located here and use odin to flash it, you'll never need an update.zip (you'll boot directly to red CWM instead of stock blue recovery)
http://forum.xda-developers.com/showthread.php?t=942021

Well I don't have a comp to use odin w but I'll dl it then just do it at my friends later was trying to avoid that but thanks
Sent from my SCH-I500 using XDA Premium App

[Guide] [Recovery] [Heimdall] Clockwork Mod 3.1.0.1 Purple Heimdall

Heimdall CWM 3.1 guide​
On Gingerbread, only flash Clockwork and not the Kernel.
Hi. I'm here to post a guide to installing ClockworkMod 3.1.0.1 on your Epic with Heimdall. I'm doing this because me and some other people had our phones bricked by the 3.0.2.5 one click root and this worked for me.
Step 1: Download and extract heimdall from here: http://www.glassechidna.com.au/products/heimdall/
Step 2: Boot your phone into download mode by holding the 1 key and pressing power after either a battery pull or simply turning your phone off and connect it to your USB Port
If You are running Mac or Linux, skip Steps 3-5. Your drivers install automatically.
Step 3: Open Zadig.exe from /drivers in the extracted folder
Step 4: Go to options> list all devices.
Step 5: Select to Install the Samsung Android USB Composite Driver from the list.
Note: It may say it has an unknown publisher (or something similar), ignore it. I am 100% sure that it's safe.
Step 6: Download CWM from http://drockstar.devphone.org/EpicTools/cwm3.1.0.1.purple.zip
Step 7: Download Drockstar kernel from http://drockstar.devphone.org/EpicKernel/DRockstar.Clean.Kernel.EC05.v1.05.zip
Step 8: Put the zimage from /kernel in the CWM Zip in the recovery slot
Step 9: Put the zImage from /kernel in the Drockstar Clean Kernel Zip in the Kernel slot.
Step 10: Press start and it should work.
It's quick and easy. Should only take about 5 minutes from start to finish.
I am not responsible for bricked phones or Michelle Bachann, or Sarah Palin or the Iraq War or the deficit, but I am responsible for cute puppies and rainbows and butterflies.

Nice dude this is good

iSaint said:
Nice dude this is good
Click to expand...
Click to collapse
Thanks for the support, bro.

Purple looks so much better than the old orange/green. Credit goes to Drockstar. All I did was make a guide for Heimdall.

Well, I can confirm this will actually work... I was planning on releasing an odin tar version of the cwm bml8 kernel, for situations like that.
To clarify the issue, sometimes when bml8 is flashed with cwm, somehow that partition gets borked, and once you try to 3 finger into it, the phone won't boot normally at all.
The quickest fix to this, is using heimdall with the phone in download mode, as described in the original post of this thread. You can just flash the cwm 3.1.0.1 zImage to recovery, as described to fix it quickly, without the need to flash entire stock tar, and erasing all your data.
I will make odin tar flashes for both the cwm 3.1.0.1, and the Clean Kernel, that can be flashed with odin, for those that don't have heimdall installed yet.
Also note, that I had a lot of bml8 flash failures in testing, when the kernel was rather large, especially when pushing the limits of what the kernel could handle. This has been the main reason for me slimming down the zImage sizes for both cwm, and the Clean Kernel. Since reducing the cwm and Clean Kernel zImage file sizes, botched flashes have been very rare.
Plus, when gingerbread official is released, the *only* way to root it, will be to flash a rooted kernel with odin or heimdall, since the exploits used by one click root scripts have all been patched. As of official gingerbread for the epic, expect no one click root scripts to work with it... something I've posted already in the general section, but I doubt very many people have read.
Sent from my SPH-D700 using Tapatalk

WARNING!!! Skip the kernel part and only do the recovery part on EE03!!!!
Sent from my SPH-D700 using XDA App

marcusant said:
WARNING!!! Skip the kernel part and only do the recovery part on EE03!!!!
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thank you for the warning. Sorry if I bricked your phone.
I couldn't flash CWM without the kernel on EC05.

Can someone give a simple but informative description of the difference between Heimdall CWM and OCR CWM , just to help educate some of us who are still fairly new to Rooting & ROMing ( I hope I'm not the only person who would be interested ) THX !

There is no difference. They are the same thing. This is jist another way of flashing recovery to the phone. Thats all. Its still the same cwm
Sent from my SPH-D700 using XDA App

xboxfanj said:
Thank you for the warning. Sorry if I bricked your phone.
I couldn't flash CWM without the kernel on EC05.
Click to expand...
Click to collapse
I dont think u bricked his phone. He is just warning other peoe cause u cant have a ec05 kernel on gingerbread. That is why u cant flash the clean kernel zimage on gb. Jjst the recovery image
Sent from my SPH-D700 using XDA App

musclehead84 said:
There is no difference. They are the same thing. This is jist another way of flashing recovery to the phone. Thats all. Its still the same cwm
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thank You ! I thought I was missing out on something - someone else told me Heimdall was for folks with Macs so I was just curious. Have A Good Day !

Am I right in saying skip the kernel flash if you are running a non-stock (Twilight for example) kernel?
marcusant said:
WARNING!!! Skip the kernel part and only do the recovery part on EE03!!!!
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA Premium App

TexasEpic4G said:
Thank You ! I thought I was missing out on something - someone else told me Heimdall was for folks with Macs so I was just curious. Have A Good Day !
Click to expand...
Click to collapse
It is, but it's also available for Windows and Linux/Unix/*Nix/GNU. Also, I had better luck with Heimdall than OneClickRoot, as OneClickRoot bricked my phone, but OneClick may be better for you.

xboxfanj said:
Purple looks so much better than the old orange/green. Credit goes to Drockstar. All I did was make a guide for Heimdall.
Click to expand...
Click to collapse
There used to be a green version? I want dat !
Btw this is nice, I will be keeping this on my Macbook Pro

Shoulon said:
There used to be a green version? I want dat !
Btw this is nice, I will be keeping this on my Macbook Pro
Click to expand...
Click to collapse
Yep. The green version is version 2.5
This video will teach you how to get it. http://www.youtube.com/watch?v=cTw7l0DugQ8 Use the thread here: http://forum.xda-developers.com/showthread.php?t=770388
It will tell you what to do, but follow along with the video to make sure you don't mess up By the way this was made by qbking77 so I take no credit.

I think he wants this version but with the green font
Sent from my Nexus S 4G using XDA Premium App

gtuansdiamm said:
I think he wants this version but with the green font
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
Yep =) what he said.

Why cant they make this one (the Best!!)
in multiple colors? so we can choose...

iSaint said:
Why cant they make this one (the Best!!)
in multiple colors? so we can choose...
Click to expand...
Click to collapse
It might create confusion. like when we had 2.5 for rfs and 3.0.0.5 for ext4

Oh well
If I can live with orange I can live with purple
Its still better than stock blue
I like blue but its just super ugly on stock recovery
Sent from my Nexus S 4G using XDA Premium App

Update baseband

Anyone have a nandroid 2.3.3 backup trying update baseband all links are no good please help I have read and looked everywhere. Edit. Found a stock p999 2.3.3 ota zip will that work for a nandroid back up I have also watched the video on the unlocked.com and it didn't work
Sent from my LG-P999 using xda premium

there should be one in the forums i just did mine and my fiances phone the other day with it and worked perfect
http://forum.xda-developers.com/showthread.php?t=1048274
http://www.mediafire.com/?6rsvckupkgpia5t
try the media fire link
---------- Post added at 03:00 AM ---------- Previous post was at 02:55 AM ----------
after you have the 2.3.3 rom you have to go to tmobiles website and use the lg update tool
http://www.lg.com/us/mobile-phones/G2X-Driver/index.jsp
then in owains rom thread their is a downloadable zip to use ics roms and what not with the new baseband im running his rom right now with it and not many issues at all besides the issues already stated

Thank you so much I will give it a try when I get home
Sent from my LG-P999 using xda premium

Let me know how it goes
Sent from my LG-P999 using xda premium

i used this thread. the download Rom link is a stock 2.3.3 rom. if you have already installed the driver to your PC you can skip those steps
http://forum.xda-developers.com/showthread.php?t=1248644
when you have that stock rom use nvflash to put the stock recovery back on your phone. reboot your phone and go to system settings/about phone and you will see software update (or something similar), do that and it will update your phone to 2.3.4 and the new baseband

Oh yeah thanks for adding the Nvflash part totally forgot about it
Sent from my LG-P999 using xda premium

thakrew317 said:
Oh yeah thanks for adding the Nvflash part totally forgot about it
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
no prob

Not working
downloaded stock rom unziped into new folder placed into cwm backup folder.did not work every time i go to restore it i get checking md5 sums and comes back error miss match md5 sums what am i doing wrong.i didnt leave any spaces in the folder .what am i missing.why can't I just load up the stock rom make a back up and use that

Don't unzip it leave it as a zipped file then flash thru clockwork
sent from my highly modified g2x

I did that to and I still get check md5 sums miss match. Do I need to change anything in the files.I have tried it every way I know how help please
Sent from my LG-P999 using xda premium

From terminal:
cd /path/to/backup/folder
md5sum *img>nandroid.md5
This will restore the md5sum in nandroid.md5.

Try and redownload it maybe
sent from my highly modified g2x

are you trying to flash the zip from the link i posted? if so, it doesnt work that way
it works like nvflash. you unzip the file into a directory on your pc. pull the battery from your phone and hold down the up and down volume buttons then plug in your usb cable, then in that folder there is a flash.bat file double click that to run it. when it is finished, pull the usb cable and putt the battery back in a boot your phone

On my PC or phone
Sent from my LG-P999 using xda premium

I didn't down load that one tried the other post I will try tomorrow thanks for all your help
Sent from my LG-P999 using xda premium

timothy7732 said:
On my PC or phone
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
on your pc. it works like nvflash does. you dont copy it to your phone at all. the batch file will do all the work. it will put your phone to stock 2.3.3, then you put a stock recovery on it (again using nvflash) and then you can do an over the air update to get the new baseband and be updated to 2.3.4

dodgefan67 said:
on your pc. it works like nvflash does. you dont copy it to your phone at all. the batch file will do all the work. it will put your phone to stock 2.3.3, then you put a stock recovery on it (again using nvflash) and then you can do an over the air update to get the new baseband and be updated to 2.3.4
Click to expand...
Click to collapse
I tried this method, and it only updated the ROM, it left my BB the same, I was only able to get the new BB by using the LG tool

idbl_fanatic said:
I tried this method, and it only updated the ROM, it left my BB the same, I was only able to get the new BB by using the LG tool
Click to expand...
Click to collapse
oops my mistake, im very sorry. you are right. im getting threads mixed up
this will put a stock rom on your phone so that you can do an over the air update to get the new BB and 2.3.4
sorry

So if I use the bat file then use the LG tool I'm good right
Sent from my LG-P999 using xda premium

timothy7732 said:
So if I use the bat file then use the LG tool I'm good right
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
if you flash this rom to your phone and then flash the stock recovery , then you can get the update over the air. go to system settings/about phone and you will see a menu item called software update (or something similar), click that and it will download the update to your phone. its only like 30 meg, but it will update the 2.3.3 to 2.3.4 and install the new baseband

[VIDEO] FP5 Update Zip + Rooting Stock

I felt this warranted its own thread, and is pertinent to development. So here's to my first thread in the development section!
As you know, the Charge is getting an update to its Gingerbread stock ROM, titled FP5.
I was one of the lucky ones to get it early, so I pulled it out of cache and uploaded it to Dropbox.
So here it is:
http://db.tt/feigCZuH
If you want to try it:
You need to be fully stock before you can use this. This includes being on RFS. Then download, rename to update.zip, place on root of SD, and flash on the stock recovery.
To Root (assuming starting at stock FP5):
Download the CWM flashable root zip, found at http://androidsu.com/superuser/ (its rude of me to hotlink it). Download the whole package for ARM, not just binary (get 3.0.7-efghi-signed). Put it on your SD card.
NOTE: Most of us Charge users have found that SuperSU (Chainfire's replacement for Superuser) is much more stable on this device. I personally recommend SuperSU, but if you want to keep using superuser, it's your call. Installation instructions will be the same, just Google SuperSU and download the zip rather than Superuser.
Then, get the CWM recovery, and flash it via Odin. Uncheck "auto reboot". Unplug your device and boot to CWM, mount /system, then flash the SU zip (I would wipe cache and dalvik just to be safe).
Your device will boot and be rooted, however the CWM recovery will be overwritten. Get root explorer and search for "install-recovery.sh" (in /system/etc) Change permissions, delete, rename, or otherwise maim the script.
Finally, reflash CWM in Odin. Your device will boot and be rooted, with CWM Recovery, with in the stock FP5 ROM. Feel free to debloat to your pleasing.
You want a video tutorial? You're hard to please.
http://youtu.be/DXSmONvpkSQ
the introduction is VERY off sync. Please don't turn the volume up and scare the crap out of yourself. Sorry, I can't make it available on mobile, something about copyright infringement.
I'll be making an Odin next week, since a user requested it. Just have to wait until I get back from vacation... EDIT: Odins are already available. None from me.
Sent from my SCH-I510 using xda premium

I look forward to see how the Tweaked version of FP5 goes & if anything will be of use to dwitherell.
Thanks for posting FP5. :victory:

kvswim said:
I felt this warranted its own thread, and is pertinent to development. So here's to my first thread in the development section!
As you know, the Charge is getting an update to its Gingerbread stock ROM, titled FP5.
I was one of the lucky ones to get it early, so I pulled it out of cache and uploaded it to Dropbox.
So here it is:
http://db.tt/feigCZuH
I have no idea of you need to rename it to update.zip or anything like that, so if someone smarter than me could advise, that would be helpful
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Thank you so much for uploading this Kvswim! Hopefully the developers can use your update to make an update of their own like Tweaked! :good:

kvswim said:
I have no idea of you need to rename it to update.zip or anything like that, so if someone smarter than me could advise, that would be helpful
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
You do need to rename it to update.zip before you flash it with the stock recovery

kvswim said:
I was one of the lucky ones to get it early, so I pulled it out of cache and uploaded it to Dropbox.
Click to expand...
Click to collapse
Thank you sir, can't wait to try it on my charge when it comes back from samsung...unless they send me back a nexus

has anyone tried it yet? I'm assuming it will work on tweaked 2.x?
I tried to flash it via CWM (before realizing that I needed to rename it to "update.zip"), but got "installation aborted". I did revert back to RFS first though.... I guess I'll try it again...

You most likely have to be full stock to use it.

jco23 said:
has anyone tried it yet? I'm assuming it will work on tweaked 2.x?
I tried to flash it via CWM (before realizing that I needed to rename it to "update.zip"), but got "installation aborted". I did revert back to RFS first though.... I guess I'll try it again...
Click to expand...
Click to collapse
You have to be 100% stock FP1 stock recovery

OK, so first off thanks kvswim for getting this out there so fast
Secondly, I'm out and about for a wee bit, but once I'm back at my computer (mid next week) I'll get to work. I'm not sure how long it'll take, but I always assume it'll take a while.
I would also like to put out a request. The last update I did I went through and updated every theme in tweaktools along the way. That took a LONG time, so I was wondering if there were any interested in assisting the theme update process. This will obviously not be relevant until I have the base all finished up, but if you feel you have some of the necessary know-how and are interested feel free to PM me. Most of the themes were made by folks that no longer have the device, which is why I updated everything last time. If I get a few takers I'll make a thread to keep things all organized as far as who is doing what, that way proper credit can be given to those that lend a hand.
Also, no worries if there is no interest/time to help. I have no issue doing it, it'll just take a bit longer.
Carry on.

I can probably make an Odin of this next week if anyone wants it.
Also dwith, I can't help you at all with the themes, I would need to walk through it at least once first. Never taken apart a theme.
Sent from my SCH-I510 using xda premium

Does this include improved radios? Will there be new radios we could flash before Tweaked gets updated?

Yes, there are radio updates in this. However I can't pull radios only until next week, and even then I'll need someone to help me.
Sent from my SCH-I510 using xda premium

kvswim said:
I can probably make an Odin of this next week if anyone wants it.
Also dwith, I can't help you at all with the themes, I would need to walk through it at least once first. Never taken apart a theme.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Yes Odin please.
Sent from my SCH-I535 using xda premium

Cool. I have no problem with waiting. I edited the fingerprint line in build.prop so I won't be hassled by the update. My phone runs fine.

You can only dump the LTE radio, you won't be able to get a dump of the CDMA radio.

imnuts said:
You can only dump the LTE radio, you won't be able to get a dump of the CDMA radio.
Click to expand...
Click to collapse
Is there a new kernel with FP5 & will you update your own kernel fork with it? I found out that http://opensource.samsung.com has FP5 as SCH-I510-VZW_GB_Opensource_Update2.zip available.

I've returned to stock and then taken the OTA and can't seem to keep my root or cwm recovery. sooo im going to have to edit my build prop until there is a root fix for this.

buhlerbuhler said:
I've returned to stock and then taken the OTA and can't seem to keep my root or cwm recovery. sooo im going to have to edit my build prop until there is a root fix for this.
Click to expand...
Click to collapse
There's a certain file that checks if your recovery "needs" to be overwritten by stock, and all you need to do is change permissions on that file. For the life of me I can't remember what it is though.
I would imagine that would help you with your root too.
Sent from my SCH-I510 using xda premium

kvswim said:
There's a certain file that checks if your recovery "needs" to be overwritten by stock, and all you need to do is change permissions on that file. For the life of me I can't remember what it is though.
I would imagine that would help you with your root too.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
install-recovery.sh
Sent from my SCH-I510 using xda app-developers app

Reilly1812 said:
install-recovery.sh
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
In /system/etc/

Pantech Flex P8010 - Stock Recovery and Root (IMG Files)

Thanks to XDA Member noobfordroid we now have the original Boot.img and Recovery.img files that we can use to further our development for this great phone. I plan on taking a better look at them later today, but until then you all are free to check them out! noobfordroid would of posted himself but he doesn't have enough posts to post a link yet.
BOOT IMG
https://www.dropbox.com/s/gq3d442q8hendyp/boot.img
RECOVERY IMG
https://www.dropbox.com/s/k49ll0mjerj84xi/recovery.img

jSterling said:
Thanks to XDA Member noobfordroid we now have the original Boot.img and Recovery.img files that we can use to further our development for this great phone. I plan on taking a better look at them later today, but until then you all are free to check them out! noobfordroid would of posted himself but he doesn't have enough posts to post a link yet.
BOOT IMG
https://www.dropbox.com/s/gq3d442q8hendyp/boot.img
RECOVERY IMG
https://www.dropbox.com/s/k49ll0mjerj84xi/recovery.img
Click to expand...
Click to collapse
awesome i will work on a cwm port ! rite now! i should have it by the end of the week now it would be on the rest of the community on how to flash it as im a noob at recoveries
---------- Post added at 06:16 PM ---------- Previous post was at 06:12 PM ----------
jSterling said:
Thanks to XDA Member noobfordroid we now have the original Boot.img and Recovery.img files that we can use to further our development for this great phone. I plan on taking a better look at them later today, but until then you all are free to check them out! noobfordroid would of posted himself but he doesn't have enough posts to post a link yet.
BOOT IMG
https://www.dropbox.com/s/gq3d442q8hendyp/boot.img
RECOVERY IMG
https://www.dropbox.com/s/k49ll0mjerj84xi/recovery.img
Click to expand...
Click to collapse
if im not mistaken cant we just do this ? http://android-dls.com/wiki/index.php?title=Build_a_custom_recovery_image now that we have the image

cwm recovery
atadres said:
awesome i will work on a cwm port ! rite now! i should have it by the end of the week now it would be on the rest of the community on how to flash it as im a noob at recoveries
---------- Post added at 06:16 PM ---------- Previous post was at 06:12 PM ----------
if im not mistaken cant we just do this ? http://android-dls.com/wiki/index.php?title=Build_a_custom_recovery_image now that we have the image
Click to expand...
Click to collapse
I ported the cwm recovery and tried to push it to the phone but it is giving an error.
[email protected]:/home/shyamalapati/android/out/target/product/p8010# fastboot flash recovery recovery.img
sending 'recovery' (6904 KB)...
OKAY [ 1.707s]
writing 'recovery'...
FAILED (remote: Not Support !!)
finished. total time: 1.713s

fails to write smh have u tried to manualy write the recovery image using root explorer on the phone just replace the file in the directory ?

I'm going to have to take a look when I get to my mother in laws. Has anyone tried asking a developer for the Pantech Burst? There may be a simple solution to the issue that we are overlooking.
Sent from my PantechP8010 using Tapatalk 2
EDIT: Also, maybe the recovery partition has a type of lock? Similar to S-ON maybe? I'm going to ask some Pantech Burst developers to see what they have to say.

From doing a few searches with the error it seems to come up often in Pantech phones (other brands as well). It could be the version of CWM or it could just be a locked bootloader issue, or just a bootloader issue. I'm not sure myself but I'm getting my netbook set up with Mint and ditching the VM so I can find out myself.
Sent from my PantechP8010 using Tapatalk 2
EDIT: My VM is up and running now and I'm going to explore. From what I've gathered so far we need to unlock the bootloader to be able to flash anything to the partitions, this can be done with "fastboot oem unlock" I don't know if that command is going to be that easy but I'm going to check it out! If that fails then were going to need to tackle the bootloader first, also for the recovery, Rootzwiki has been a great source, and they have a tutorial for everything we are looking into, there is a command but I can't remember it right now in fastboot that allows us to boot partitions without them effecting the phone. We should try booting the recovery to see if it works, if it works we may need to flash something in the recovery to unlock the bootloader. I might be completely wrong but hopefully the unlock command works.

jSterling said:
From doing a few searches with the error it seems to come up often in Pantech phones (other brands as well). It could be the version of CWM or it could just be a locked bootloader issue, or just a bootloader issue. I'm not sure myself but I'm getting my netbook set up with Mint and ditching the VM so I can find out myself.
Sent from my PantechP8010 using Tapatalk 2
EDIT: My VM is up and running now and I'm going to explore. From what I've gathered so far we need to unlock the bootloader to be able to flash anything to the partitions, this can be done with "fastboot oem unlock" I don't know if that command is going to be that easy but I'm going to check it out! If that fails then were going to need to tackle the bootloader first, also for the recovery, Rootzwiki has been a great source, and they have a tutorial for everything we are looking into, there is a command but I can't remember it right now in fastboot that allows us to boot partitions without them effecting the phone. We should try booting the recovery to see if it works, if it works we may need to flash something in the recovery to unlock the bootloader. I might be completely wrong but hopefully the unlock command works.
Click to expand...
Click to collapse
yeah sounds right youve had an evo before idk when but if ur one of the early users of the froyo root method we had to unlock a bootloader using a certain comand in adb to be able to downgrade to an earlier 2.2 that was rootable before the one clicks came out ill try to find that old evo tutorial and find that command lol there was a video i belive with it and the rootz wiki is what my other link on the other page was supposed to send u to i guess i missed a couple of words in the URL on that other page lol good luck to you keep us updated im glad the flex has gotten a community like ours that can use examples to start from scratch

Command should be "fastboot boot recovery.img". User attn1 from the burst developers said if it boots the recovery we should be able to install it with the recovery. I can also use fastboot on Windows in case anyone is interested. Also can we get the custom CWM posted?
Sent from my PantechP8010 using Tapatalk 2

@noobfordroid could you please PM us a link to your cwm recovery ? wow @jsterrling someone from burst actually replied ive been trying for a while now lol hope we can get this up and going using the fastboot command and that the security measures on this boot loader are not insane like that of HTC
---------- Post added at 11:48 AM ---------- Previous post was at 11:40 AM ----------
Btw any of you heard about the pantech discover coming out soon specs are close to ours but with better hardware like camera and display

Yeah, I actually joined the IRC channel and left a message, he was nice enough to reply back right after I got off of work. I'm probably going to be pretty busy up until Friday with work, I took a lot of time off for other reasons but I'm going to try to work on unlocking the bootloader when I can. Fastboot can be used in Windows just installed the Google USB drivers that come with the SDK and all is well.
We just need a custom CWM which I guess I'm going to start working on unless noobfordroid can post his.

jSterling said:
Yeah, I actually joined the IRC channel and left a message, he was nice enough to reply back right after I got off of work. I'm probably going to be pretty busy up until Friday with work, I took a lot of time off for other reasons but I'm going to try to work on unlocking the bootloader when I can. Fastboot can be used in Windows just installed the Google USB drivers that come with the SDK and all is well.
We just need a custom CWM which I guess I'm going to start working on unless noobfordroid can post his.
Click to expand...
Click to collapse
at the risk of being fired ive been on here at work all day lol i was also at work when me and donovan01 were working on the root for the flex lol im captivated at starting from scratch feels like were all pioneers that our work would prbly help out future pantech users since it seems pantech is trying to become a top tier cell phone company now

atadres said:
at the risk of being fired ive been on here at work all day lol i was also at work when me and donovan01 were working on the root for the flex lol im captivated at starting from scratch feels like were all pioneers that our work would prbly help out future pantech users since it seems pantech is trying to become a top tier cell phone company now
Click to expand...
Click to collapse
Yeah they're showing some nice phones now and this has to be probably the best smartphone I've ever owned, camera aside. They just need to support developers but as soon as they do that ill be a pantech customer for life.
Sent from my PantechP8010 using Tapatalk 2

I will send the link a soon as i get home
Sent from my PantechP8010 using xda app-developers app

fast boot recovery
noobfordroid said:
I will send the link a soon as i get home
Sent from my PantechP8010 using xda app-developers app
Click to expand...
Click to collapse
I tried teh fastboot recovery but it is still booting to the phone. Will try to create the recovery again and try
---------- Post added 9th January 2013 at 12:16 AM ---------- Previous post was 8th January 2013 at 11:40 PM ----------
noobfordroid said:
I tried teh fastboot recovery but it is still booting to the phone. Will try to create the recovery again and try
Click to expand...
Click to collapse
boot.img - http:// db .tt/kKJM0n6z
recovery.img - http:// db .tt/SNmTapqg
cwm recovery - http:// db .tt/k6eVZagS

Awesome, I'll take a look tomorrow. Also boot.img and recovery.img are stock I'm assuming?
EDIT: Post #100!!!

Yes.they are stock
Sent from my PantechP8010 using xda app-developers app

[/COLOR]Ok guys boot into recovery with volume up plus power button! then tap volume up + DOWN at the same time it pulls up a menue with the words reboot system now apply update from external Storage wipe data factory reset apply update from cache and when your rooted a new button comes up that says rooted! lol ? ? and when u press on it it says this device was rooted lol seriously pantech tryinna thruw our warrinties under the bus or what!

cwm recovery
The cwm recovery i posted above is not working. I followed a guide online to port that recovery. Can someone post any tutorial for posting cwm?

Looks like we need to consult the burst.developers. did it just hang at fastboot?
Sent from my PantechP8010 using Tapatalk 2

http://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html here you go i think youd have to change the repo from gingerbread to ICS u know lol so we dont end up with abad port