So long story short, I was packing for a trip and my Transformer slid off my table onto the floor (about a 3-4ft drop). No visible damage, so I thought it was ok. That was until I got to the airport and tried to turn it on. Nothing will get it to turn on. It seems when I press the power button, I hear a click inside. Not sure what that is.
I have a square trade warranty that covers accidental damage, but i'm in cali until the new year so i'm waiting till I get home.
Anyone know what the click might be?
Broken power button maybe?
I have no idea what the internals to the power button look like, but I doubt it. Usually when I plug in my tablet it will auto turn on, which it does not do anymore, unfortunately.
The click could be a power jump between 2 connection points that used to be together. Whenever you have a joint that is disjointed, you get a clicking sound when power is trying to go through.
goodintentions said:
The click could be a power jump between 2 connection points that used to be together. Whenever you have a joint that is disjointed, you get a clicking sound when power is trying to go through.
Click to expand...
Click to collapse
Makes sense. I guess I'll just wait till I get home to send it in. I was just curious about the clicking. Thanks.
Hey...at least it didn't crack the screen from a 3-4 feet fall! Curious...was it onto a carpeted floor?
you can try here first if u like
http://forum.xda-developers.com/showthread.php?t=1391254
Sent from my Transformer TF101 using xda premium
SiNJiN76 said:
Hey...at least it didn't crack the screen from a 3-4 feet fall! Curious...was it onto a carpeted floor?
Click to expand...
Click to collapse
nope, laminated kitchen floor, wood underneath
txtmikhail said:
you can try here first if u like
http://forum.xda-developers.com/showthread.php?t=1391254
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
again if it was the power button, it would turn on when i plug it in.
Back from Cali, Transformer finally on it's way in for repair or (hopefully) refund. If I do get a refund, waiting for the 1080p Prime
tekkitan said:
So long story short, I was packing for a trip and my Transformer slid off my table onto the floor (about a 3-4ft drop). No visible damage, so I thought it was ok. That was until I got to the airport and tried to turn it on. Nothing will get it to turn on. It seems when I press the power button, I hear a click inside. Not sure what that is.
I have a square trade warranty that covers accidental damage, but i'm in cali until the new year so i'm waiting till I get home.
Anyone know what the click might be?
Click to expand...
Click to collapse
The click you hear is the camera shutter opening
Sent from my Transformer TF101 using Tapatalk
Related
I bought an Inspire 4G off craigslist and the seller stated the phone wouldn't turn on but I was hoping I could fix it. This is what I discovered:
1) The phone won't turn on, no white boot screen, nothing
2) When I press the power button there is a light that blinks rapidly and it's orange at the top left of the earpiece, not green like I've read online about. Its stops blinking when I let go of the power button.
3) When I have the phone plugged into the wall charger the orange light blinks again constantly, very rapidly.
4) I tried connecting the phone to my computer through USB and it wouldn't recognize it.
Anyone have any idea what might be the problem or what I can do to fix it?
I would leave it on charge for a while then follow brick instructions in sticky, had a bad flash that did that
Sent from my HTC Desire HD using XDA Premium App
How much did you pay for it? Haha and yeah I tottaly agree with ^^^ let it charge for a while.
I've had the same thing happen to me a few times, and all I had to do was pull out the battery and then everything went back to normal.
rboone - how long is a while? I left it charging last night for about 7 hours lol.
ThEiiNoCeNT - I paid $100.
zamula - I pulled the battery out too. I tried everything I could think of. I wanted to try to connect it to my computer to unbrick it but it wouldn't recognize it, I haven't tried ODIN or anything like that, but it didn't recognize it through "My Computer". When you take the battery cover off does the battery just slide out? Mine slides out, it doesn't click in or anything.
crossover37 said:
rboone - how long is a while? I left it charging last night for about 7 hours lol.
ThEiiNoCeNT - I paid $100.
zamula - I pulled the battery out too. I tried everything I could think of. I wanted to try to connect it to my computer to unbrick it but it wouldn't recognize it, I haven't tried ODIN or anything like that, but it didn't recognize it through "My Computer". When you take the battery cover off does the battery just slide out? Mine slides out, it doesn't click in or anything.
Click to expand...
Click to collapse
Can you get it into hboot? And you can't use Odin that's a Samsung firmware for Samsung phones. You will need to get the ruu
Sent from my Inspire 4G using XDA Premium App
trell959 said:
Can you get it into hboot? And you can't use Odin that's a Samsung firmware for Samsung phones. You will need to get the ruu
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
No, the screen won't turn on at all. Oh ok, I thought maybe Odin was only for Samsung. Just download the exe from this thread (link below) and follow the steps? Is there anything specific I should do since my phone won't even boot and I can't get my computer to recognize it?
http://forum.xda-developers.com/showthread.php?t=952224
Have you tried holding the volume down button and pressing the power button?
Racing666 said:
Have you tried holding the volume down button and pressing the power button?
Click to expand...
Click to collapse
Yes. I pressed the volume down button and held it and then pressed the power button. When the power button was pressed the orange light blinked again. It didn't turn on though.
crossover37 said:
Yes. I pressed the volume down button and held it and then pressed the power button. When the power button was pressed the orange light blinked again. It didn't turn on though.
Click to expand...
Click to collapse
Did the person you bought it from offer any kind of hint as to what happened to the phone that caused this condition?
Probably not pre-sale, but now that he has your money, perhaps he'll be more willing to open up about it.
Scott_S said:
Did the person you bought it from offer any kind of hint as to what happened to the phone that caused this condition?
Probably not pre-sale, but now that he has your money, perhaps he'll be more willing to open up about it.
Click to expand...
Click to collapse
Not really, I texted him now to see if he can give me some more info. We'll see what he says.
Something I noticed now is that the orange light doesn't blink when I press the power button without the phone plugged in, it did earlier with the phone plugged in and without it plugged in (just running on battery). Not sure if that's good or bad.
Probably dropped in water. Its toast most likely.
Sent from my Desire HD using XDA Premium App
quangxha said:
Probably dropped in water. Its toast most likely.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Yea, I just checked the indicator and it's read. Water damaged! I tried to find the water damage indicator yesterday when I bought it but couldn't see it.
So...is it too late to try the rice in the bag trick? The orange light flickers...I'm wondering if that means anything positive.
If it is water damaged and you have no chance of turning it on I would throw it in rice anyways...
ThEiiNoCeNT said:
If it is water damaged and you have no chance of turning it on I would throw it in rice anyways...
Click to expand...
Click to collapse
Ok, I'll try it. Take the phone apart and drop the pieces in rice? Put the phone without the battery in it in the bag of rice? or put the phone with the battery in it with the pieces on it as well (battery cover, sim card/sd card cover)?
I heard dropping it in rubbing alcohol helps too...should I avoid this and just try the rice?
crossover37 said:
Not really, I texted him now to see if he can give me some more info. We'll see what he says.
Something I noticed now is that the orange light doesn't blink when I press the power button without the phone plugged in, it did earlier with the phone plugged in and without it plugged in (just running on battery). Not sure if that's good or bad.
Click to expand...
Click to collapse
Well, now that you've mentioned the condition of the water damage indicator, I wouldn't hold my breath waiting for a response from the seller.
Dude's prolly in Canada by now.
Part it out on the bay. Prolly get more then 100 for it.
tweaked said:
Part it out on the bay. Prolly get more then 100 for it.
Click to expand...
Click to collapse
Good idea. If that screen is in working condition, there's all sorts of peeps with shattered screens running around these parts. Or there was, at least.
I don't know how you'd go about testing it out, without a known working secondary inspire laying around willing to be a frankenstein test subject.
Scott_S said:
Good idea. If that screen is in working condition, there's all sorts of peeps with shattered screens running around these parts. Or there was, at least.
I don't know how you'd go about testing it out, without a known working secondary inspire laying around willing to be a frankenstein test subject.
Click to expand...
Click to collapse
Go to bed Scott!!! Oops me too.
henrybravo said:
Go to bed Scott!!! Oops me too.
Click to expand...
Click to collapse
Almost there.
One or two more obnoxious, off-topic, and completely useless posts, and then I'll call it quits for the day.
Had my pad in my bag for work hanging off a chair.
Bag slides off chair and falls, maybe 2 feet to floor?
Now my transformer will not show anything on the screen. When I wake it, the screen lights up a pale black. It basically repsonds to waking it but there is nothing displayed on the screen.
I want to try and reset it but don't know how without waiting a few days until it dies.
Any suggestions?
Sent from my Epic Touch using xda premium
Shine a light on the screen, sounds like the back light has fubard
If there isnt any evidence of "droppage" on the TF then rma it
CaNsA said:
Shine a light on the screen, sounds like the back light has fubard
If there isnt any evidence of "droppage" on the TF then rma it
Click to expand...
Click to collapse
Nothing.
I held down power button for 10-12 seconds. Powers off but the screen still lights up when powering on. Just doesn't display anything. Grrrrrr!
How do I go about contacting Asus for RMA?
Sent from my SPH-D710 using xda premium
nyc_zx10 said:
How do I go about contacting Asus for RMA?
Click to expand...
Click to collapse
Google Is Your Friend.
1 888 678 3688
RMA was created.
That was the fastest, most trouble free customer support experience I've had in a damn long time.
Two thumbs up Asus.
They are sending shipping label and the pad will then be on its way to Asus support for anywhere from 5-14 days turn around time. (depending on availability of components)
good stuff, let us know how you get on.
Sent from my Transformer TF101 using Tapatalk
This is a common issue with many transformers unfortunately after drops and knocks.
It is actually the data cable for the display coming loose, the back light is still on because the display is still powered, making the pale black of the screen. There is a guide somewhere on xda to take your TF and reconnect that specific cable. If you do not wish to take you TF apart I found hitting the back of the tablet (near the base where the connector is) it a flat palm can often knock the cable slightly back into place. This actually worked for me personally and it hasn't broken since.
no sense is telling a big long story. I woke up this morning, put my phone in my pocket, went out to my car to plug it into aux, and when i tried to turn the volume up, THERE WAS NO VOLUME BUTTON!!!
Gone. Forever, probably. I'm talking with a Verizon tech rep over the phone and they said this might not be covered under Defect and might have to be replaced through Asurion. I call bullsh*t on that. I'm going to try and find where that button is and take the phone into a Verizon store to prove that this wasn't from dropping it or anything.
Watch out for your volume buttons, folks. they're pesky little things....
UPDATE: Okay... so it just pops back in. solid hold and no issues, but now i'm a little concerned... I've never heard of anyone else having that same issue, but if it happens again, does anyone know of a good route to go for getting a replacement.
Never heard of this. You sure it didn't snagged on anything?
Sent from my SCH-I535 using xda premium
blestsol said:
Never heard of this. You sure it didn't snagged on anything?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I really don't think so, but it doesn't seem like it's going to fall out again. I'll keep an eye on it and see if I did something that caused it to pop out.
Sent from my sexy phone using XDA Premium
Did you check if it would be safe to super glue it in?
Sent from my SCH-I535 using Tapatalk 2
kench33 said:
Did you check if it would be safe to super glue it in?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I thought about that and I don't think the Gore would hold with the constant rocking if the switch. I also don't think it would hurt it. The switch is held in place by two tiny prongs on with side that both look perfectly fine. It looks like the switch might have been pulled out by a stray thread from my pillow (I use my phone as an alarm and just lay it next to my head).
Sent from my sexy phone using XDA Premium
Dat long thumb nail. Lol
Sent from my SCH-I535 using Tapatalk 2
The power button fell off of my wife's phone. VZW replaced under warranty. I immediately got her an Otterbox Commuter case that encloses the power and volume buttons.
Lol its not a big deal. Just buy a new one online, and watch a teardown video and stop at the volume button and do the opposite of what they do
Sent from my SCH-I535 using Tapatalk 2
dberry74 said:
The power button fell off of my wife's phone. VZW replaced under warranty. I immediately got her an Otterbox Commuter case that encloses the power and volume buttons.
Click to expand...
Click to collapse
My power button got snagged on the edge of a case I was taking off last night and came off. I found it on my desk when I got home today and stuffed it back in the hole. All is well so far...
Yeah this happened to my power button too, but i was like watching a youtube vid and flicking the button and felt it pop out, simply pop back in and hasnt fell out since.
My volume button also came off. I'm still not positive how it happened but I think it was when I was removing the case to put in the sd card. This was the third day I had the phone so I went back to Verizon and talked to them. They said they don't have parts but offered to replace the phone. They were out of stock on the one I had but said they would call or email when more came in. That night I found the cat playing with the button on the floor of my office and stuck it back in. I have had no issues with it since even though I chance cases on a regular basis depending on need or whim. Verizon did call several days later and offer to do the trade which I told them I didn't need any more.
Never heard of this. I change my case on occasion as well. I will have to be more careful when doing so. Thanks for the heads up.
Sent from my SCH-I535 using xda app-developers app
Wyvern49 said:
My volume button also came off. I'm still not positive how it happened but I think it was when I was removing the case to put in the sd card. This was the third day I had the phone so I went back to Verizon and talked to them. They said they don't have parts but offered to replace the phone. They were out of stock on the one I had but said they would call or email when more came in. That night I found the cat playing with the button on the floor of my office and stuck it back in. I have had no issues with it since even though I chance cases on a regular basis depending on need or whim. Verizon did call several days later and offer to do the trade which I told them I didn't need any more.
Click to expand...
Click to collapse
Sounds like a made up disillusion
Sent from my SCH-I535 using xda app-developers app
My wife's volume button went missing yesterday. No idea how it happened or where it went
Sent from my SCH-I605 using xda app-developers app
My power button actually popped out last night. I was taking off the case because the phone locked up on me and I had to remove the battery. I removed my case and heard something loose, looked in the case and the power button was sitting there. I am looking for a case now that covers the buttons so i do not lose them at some random point.
Hi Xdaers
I'm sorry if this has been posted already, I tried searching without finding anything that worked.
I was using my TF300T last wednesday and i got a notification telling me of a system update, so i accepted the update.
After the update was applied the device booted up fine and i continued to use it, at the end of the day i put the device to sleep.
The following day i went to wake it up and nothing happened. My first thoughts was the battery died so i charged it until the light went green on both the pad & dock, Still no response. PLEASE HELP ITS OUT OF WARRANTY.
I have tried holding POWER, POWER & VOL-, POWER & VOL+, RESET BUTTON.
I also tried connecting it to my pc, it failed to detect the device.
I dont know what else to try. :crying:
STOCK, NO-ROOT, NOT-UNLOCKED
Ithink it`s not the software i think your tablet is actually broken
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
noahvt said:
Ithink it`s not the software i think your tablet is actually broken
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
What could have broken it, all i did was leave it over night.
If i put my ear on the top left of the back i can hear a very faint noise when pressing the power button, like my nexus 7 does just before the screen comes on.
Your lcd might be not working anymore!
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
noahvt said:
Your lcd might be not working anymore!
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
If its just the screen you can always try hooking up a HDMI to a TV and see if you get anything. Just to make sure did you make sure to hold down the power button long enough? Sometimes you do have to hold it down for quite a bit for something to show up.
[email protected] said:
If its just the screen you can always try hooking up a HDMI to a TV and see if you get anything. Just to make sure did you make sure to hold down the power button long enough? Sometimes you do have to hold it down for quite a bit for something to show up.
Click to expand...
Click to collapse
Yeah, just hook it up to a tv to see if it works!
noahvt said:
Yeah, just hook it up to a tv to see if it works!
Click to expand...
Click to collapse
I have had it connected to the TV with no picture. I held the power button for at least 5-10 minutes. I've even removed & replaced the battery and tried holding power, no look there. I did find something interesting when I removed the back tho (bare in mind this device was brand new and has never been opened before) I found 4 warranty sticker all broken and finger prints fused onto the copper heatsink.
aronfeerick said:
I have had it connected to the TV with no picture. I held the power button for at least 5-10 minutes. I've even removed & replaced the battery and tried holding power, no look there. I did find something interesting when I removed the back tho (bare in mind this device was brand new and has never been opened before) I found 4 warranty sticker all broken and finger prints fused onto the copper heatsink.
Click to expand...
Click to collapse
It might be a poorly refurbished device :'(
noahvt said:
It might be a poorly refurbished device :'(
Click to expand...
Click to collapse
Tell me about it I'm going to be speaking to training standards as I was sold it as "brand new" followed by speaking to the shop I got it from telling them they broke the sale of goods act 1979 (selling a refurbished unit as pristine). Hopefully I will get a new device.
aronfeerick said:
Tell me about it I'm going to be speaking to training standards as I was sold it as "brand new" followed by speaking to the shop I got it from telling them they broke the sale of goods act 1979 (selling a refurbished unit as pristine). Hopefully I will get a new device.
Click to expand...
Click to collapse
if there is any sign that you took it apart then they probably won't replace it
The same happened to me today, I used it normally and the screen just froze and I reset it only asus logo and stands. turn it off and will not start black screen and that's it. then I opened it and I see finger prints fused on to the chopper. Horrible ...
denmla85 said:
The same happened to me today, I used it normally and the screen just froze and I reset it only asus logo and stands. turn it off and will not start black screen and that's it. then I opened it and I see finger prints fused on to the chopper. Horrible ...
Click to expand...
Click to collapse
So just a quick update I just got back from my holiday and thought I'd try turn it on, and as if by magic it booted as normal.
Now the only issues I have is random reboots.
It seems to restart after a few minutes when I touch the screen. Is it possible to revert to ICS without root. I managed to do it before just by copying the update file from the Asus website on to the SD card. Will that work when going from 4.2 to 4.1???
aronfeerick said:
Is it possible to revert to ICS without root. I managed to do it before just by copying the update file from the Asus website on to the SD card. Will that work when going from 4.2 to 4.1???
Click to expand...
Click to collapse
Anyone know if this is posible??
aronfeerick said:
Anyone know if this is posible??
Click to expand...
Click to collapse
AFAIK you can't go back to ICS once the tab is upgraded to JB. See this thread. However, you can go back and forth between 4.2 and 4.1. Hope that answers your question.
Last night, someone left the room and turned off the light, and I thought I had set my tablet down on a stable, level surface. Well, one thing led to another, and it fell to the concrete floor, and the power button landed just so and busted. So now I can't turn it off.... Or on, ever again. So I'm desperately making sure it stays charged and on until I figure something out. What can I do? Will NVIDIA fix it? Hopefully not for an arm and a leg?
That's a joke, right? ?
Niii4 said:
That's a joke, right? ��
Click to expand...
Click to collapse
No.
So, the power button fell off? Photo?
Contact nvidia. See what price they quote, chances are you won't like it though. If you don't have it insured you could always see if you can buy a broken, spares and repairs device from online. Might be worth seeing if you can order just the part.
Is it just the power button that is damaged or do you think the switch is damaged itself?
Sent from my SHIELD Tablet using Tapatalk
They approved the RMA. Just waiting to hear back from them.
doesnt your shield turn on when plug in a charger?
robgee789 said:
doesnt your shield turn on when plug in a charger?
Click to expand...
Click to collapse
You mean when it's dead? No. Just displays a big battery with green juice in it. If I were to tap the power button, it would briefly show this again. If I held it, it would power up and show the NVIDIA logo.
Ah OK my bad mate
Sent from my SHIELD Tablet K1 using Tapatalk
Get a new power button.
Niii4 said:
Get a new power button.
Click to expand...
Click to collapse
Oh, yeah, that's just SO easy.