I flashed this rom recently and everything was working fine, but I got stuck at bootloop after flashing the kernel using sgs flasher. So I flashed the non rooted version of this leak using odin. Now I can't root my phone using SOC. How can I root it? Would flashing the zImage from this rom using odin work? Any help would be appreciated.
There is no way to root the stock kernel...that's why I made a rooted version...to flash the stock kernel you have to disable voodoo lagfix in recovery....I posted that in op
Sent from my SGH-I997 using xda premium
Thanks a lot for the quick reply! Weird thing, I read that part but couldn't find voodoo on my CWM. Anyway I guess I'm gonna stock back to UCKD5 or something and then root/3e/CWM on top of it and later flash your rom.
Thanks a lot for the rom! Love UCKL2 so far!!!
rabinfuse said:
How can I root it? Would flashing the zImage from this rom using odin work? Any help would be appreciated.
Click to expand...
Click to collapse
To be able to root the official (non rooted) leaked GB roms, you just flash a custom kernel like Entropy's daily driver using Heimdall or Odin. Then, you have to install su and Superuser either manually with adb or with a CWM flashable zip. It's really not too hard to do. Once it's rooted, you just flash the stock kernel again for working video, etc. That's how I do it anyway.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Related
These are modded stock kernel from all gingerbread leak. I didn't change anything to these kernel, they are pure stock but did added few mods to it.
Things I added:
- CWM Recovery (Voodoo Red).
- Voodoo lagfix (it will convert /system, /data, and /cache partition to ext4 during first boot)
- Auto root (kernel will automatically root your GB ROM if its not rooted and install superuser.apk)
Installation procedure for RAW LEAK version:
- Install kernel using ODIN version, phone will reboot automatically.
- Go to recovery (adb reboot recovery).
- Disable voodoo
- Reboot
- Install busybox from market
- Go to recovery (adb reboot recovery)
- Enable voodoo
- Reboot
ODIN version:
stock+Voodoo-T959VKG4.tar
stock+Voodoo-T959VKG6.tar
stock+Voodoo-T959VKH2.tar
stock+Voodoo-T959VKI1.tar
stock+Voodoo-T959VKI3.tar
stock+Voodoo-T959VKJ1.tar
CWM Flashable:
stock+Voodoo-T959VKG4-unsigned-update.zip
stock+Voodoo-T959VKG6-unsigned-update.zip
stock+Voodoo-T959VKH2-unsigned-update.zip
stock+Voodoo-T959VKI1-unsigned-update.zip
stock+Voodoo-T959VKI3-unsigned-update.zip
stock+Voodoo-T959VKJ1-unsigned-update.zip
Great work as usual dr. honk!
Sent from my SGH-T959V using XDA Premium App
ty honk as per usual
great work
Brilliant thank you dr honk and team whiskey!
Sent from my SGH-T959V using XDA App
Thanks man for the hard work..
but have a problem do you flash this in phone,pda, or bootloader i tried all 4 option and it doesnt move what so ever
CozzaFrenzyy said:
Brilliant thank you dr honk and team whiskey!
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
This is awesome drhonk is a genius.
sent from my honey 3d themed unity 1.29 using XDA premium app
Oh man...!!!! Now I have to flash kg4 bootloaders
Sent from my SGH-T959V using XDA App
Now im at a totally balnk screen still in download mode took the battery out put it back in and its a black screen still in DM..
Actually where can i find the bootloaders? I flashed hawks deodexed sans the bootloaders. will I have to extract from original leak? Or should I still be on froyo cause I can't get into recovery on this rom
Sent from my SGH-T959V using XDA App
im flashing back to KD1 then ill flash the debloated version then ill odin this kernal see if that works
Damn! Now I have to switch to Gingerbread. Great work drhonk!
Thank You! You are the Man!
So... my kernel flash failed, and I got the "Firmware upgrade encountered an issue." message... Am I screwed? or should I still be able to enter download mode?
EDIT: Scratch that, it took a bit, but my phone appeared in Odin again. No worries
DOUBLE EDIT: This just flashes in the 'PDA' field right? I'm not doing anything wrong?
AThis sounds like good news, if only i understood what most of the stuff meant. Can someone give me accurate, precise directions on flashing this, it would be greatly appreciated. Current info: I'm on balil 3.3UV kernel, ICBINB, and kf2 modem. Thanks for all the help awesome community! Thanks to drhonk for making this kernel too!
mine still hangs wen i try to odin this file
richielasalsa said:
mine still hangs wen i try to odin this file
Click to expand...
Click to collapse
That's what's happening to me. I wonder... if we replace the one in the leak and flash that, should it work?
Truly brilliant work drhonk. Thank you once again for your superior dev work on this phone.
Sent from my SGH-T959V using XDA Premium App
GDofWR420 said:
Truly brilliant work drhonk. Thank you once again for your superior dev work on this phone.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I'm assuming that it worked perfectly for you?
which slot does this get flashed from bootloader, pda, phone, or csc
drhonk said:
This is a modded stock kernel from the latest gingerbread leak, UVKG4. I didn't change anything to the kernel, it's pure stock but did added few mods to it. In theory .. this kernel should work with any GB leak for SGS4G as long as you're still on Froyo bootloader or KG4 bootloader, otherwise you won't be able to get to recovery.
Things I added:
- CWM Recovery (Voodoo Red).
- Voodoo lagfix (it will convert /system, /data, and /cache partition to ext4 during first boot)
- Auto root (kernel will automatically root your GB ROM if its not rooted and install superuser.apk)
NOTE:
This is ODIN file, use ODIN to flash this kernel .. if you don't know how, google it.
T959VUVKG4_Kernel_CWM_Voodoo.tar
Click to expand...
Click to collapse
Humans, (and some others),
To flash. Put it into PDA on ODIN, or extract it and put the zImage in Heimdall.
Thanks
airfluip1 said:
Humans, (and some others),
To flash. Put it into PDA on ODIN, or extract it and put the zImage in Heimdall.
Click to expand...
Click to collapse
Sent from my SGH-T959V using XDA App
I've done this twice but tried to flash an updated kernal via odin and the result ends in a brick. I'm running Octane v2 and was flashing the KJ3 version. I can't remember what I was running before, but did the same thing as well. What gives?
Hard to say without more detail. You said you were trying to flash a kernel on top of Octane but, to my knowledge, no one has put a KJ3 kernel out there. You may be flashing a new ROM vs a kernel.
If you are trying to flash a new ROM (KJ3 in this case) to replace Octane, then you need to insure you don't have voodoo enabled when flashing a stock ROM as stock ROMs cannot read the ext4 filesystem.
If you've already flashed a stock KJ3 ROM, download drhonk's KJ1 kernel with root/cwm/voodoo, flash it via ODIN, let the phone boot, reboot into recovery, disable all voodoo, reboot the phone, then you should be in a good place to flash whatever GB ROM you want.
I meant KJ1 kernel. I already had octane flashed but flashing the kernel via Odin, it bricks. I don't want to flash thru cwm for fear of the same
Sent from my SGH-T959V using xda premium
Interesting. When you say it bricks, what exactly happens?
stephen_w said:
Interesting. When you say it bricks, what exactly happens?
Click to expand...
Click to collapse
I get no response from the screen, power button, or touch keys. It wont even respond to my JIG. It'll respond to the pc when I have odin open to let me know it's connected, but other than that, almost like a dead rock. When I odin it, It will flash with just the blue status bar.
If you're using Odin, could it be that you're flashing the kernel in the wrong slot?
It could also be a bad download.
I just flashed Octane v2.X two days ago, and I flashed the KI3 kernel through CWM. Everything worked fine for me.
bkoon1218 said:
If you're using Odin, could it be that you're flashing the kernel in the wrong slot?
It could also be a bad download.
I just flashed Octane v2.X two days ago, and I flashed the KI3 kernel through CWM. Everything worked fine for me.
Click to expand...
Click to collapse
Its supposed to go into the pda slot right?
Sent from my SGH-T959V using xda premium
Yes, it goes into PDA. As suggested it might be a bad download.
Sent from my SGH-T959V using XDA App
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
When in cwm, choose to install zip from SD card and go all the way to bottom and select "update.zip" and if it doesn't reboot, select reboot now and it should boot into Red CWM. That might do it i think
Froggys go ribbet
joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
Kevinr678 said:
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.
joho5 said:
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.
Click to expand...
Click to collapse
Well you need to have a kernel with voodoo enabled like Entropy's or you can't get red cwm. The stock leaks HAVE to have a stock kernel for video to work however. Oh, and yes you can. You can do that or through SGS Kernel Flasher on the market. What do you need red for anyway?
Don't forget, if I helped you, hit thanks please
Sent from my SAMSUNG-SGH-I997 using xda premium
Just installed ROM Manager (5.5.23) and flashed CWM Recovery (3.2.0.0)
Before I try and flash a new ROM, tried to use ROM Manager to backup current ROM.
Getting error message:
Failed to verify whole-file signature
Signature Verification Failed
Installation Aborted
Samsung Galaxy S 4G (sgh-t959v)
Froyo 2.2.1
Kernel 2.6.32.9
Rooted using Super 1 Click
Frankly, I think I'm way out of my league...the more I read, the more confused I get.
Any help or suggestions would be appreciated.
I also have Titanium Backup installed if that means anything.
First.
http://forum.xda-developers.com/showthread.php?t=1305560
Then
http://forum.xda-developers.com/showthread.php?t=1470716
Thanks, TwitchyEye...
I've read the articles...I'm still learning.
Before I experiment with installing any custom ROM's or
upgrading to GB, I wanted to make sure I had my existing
ROM backed up.
Apparently, I am unable to boot into CWM recovery.
If this helps, the recovery installed on the SD card is:
clockworkmod/download/download2.clockworkmod.com/recoveries/recovery-clockwork-3.2.0.0-galaxys4g.zip
I copied this file to my computer & unzipped it. It unzipped into 28 files, none of which was an
image file.
As I said before, maybe I'm way out of my league.
Thanks for the reply.
All you need to do is flash a rooted kernel with cwm already in it. Read the second post in lumin's guide. I think you are confused about how recovery works on this phone. It's in the kernel.
OK...as I understand it, I have to download a program called Odin and a
kernel and flash the kernel using Odin.
I do know how to get the phone into download mode.
I'm still a little nervous about doing this (although I was able to
root the phone without any problems).
Thanks again...
You have got to be adventurous when it comes to flashing. Luckily this phone is very hard to brick. Even if you get a boot loop with no cwm you can still one-click to stock and try again.
Sent from my SGH-T959V using xda premium
As I understand it, I need CWM recovery in order to back up my stock ROM...and ROM manager
is giving me all these error messages.
So...in order to get CWM recovery, I need to flash a custom kernel that includes it.
According to what I've read, I can either use Odin or SGS Kernel Flasher.
1. Which should I use
2. Which kernel should I select
Thanks...
Any particular reason you want to backup you stock ROM?
Sent from my SGH-T959V using xda premium
Are there any froyo kernel with good links? He's on froyo so any gb+ kernel will soft brick him
Sent from my Galaxy Nexus using xda premium
Beastmode said:
Are there any froyo kernel with good links? He's on froyo so any gb+ kernel will soft brick him
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Couldn't he just one-click to a rooted, GB stock with cwm?
Sent from my SGH-T959V using xda premium
DickyG said:
Just installed ROM Manager (5.5.23) and flashed CWM Recovery (3.2.0.0)
Before I try and flash a new ROM, tried to use ROM Manager to backup current ROM.
Getting error message:
Failed to verify whole-file signature
Signature Verification Failed
Installation Aborted
Samsung Galaxy S 4G (sgh-t959v)
Froyo 2.2.1
Kernel 2.6.32.9
Rooted using Super 1 Click
Frankly, I think I'm way out of my league...the more I read, the more confused I get.
Any help or suggestions would be appreciated.
I also have Titanium Backup installed if that means anything.
Click to expand...
Click to collapse
Don't worry....go for it. One clicked back myself like 6 times. Easy as pie!
Will flashing Bali 3.3 with SGS Kernel Flasher work?
You are over thinking things. Just do a one click to stock and start from there.
Sent from my SGH-T959V using xda premium
DickyG said:
Will flashing Bali 3.3 with SGS Kernel Flasher work?
Click to expand...
Click to collapse
You gotta walk before you can run. One-Click yourself back to GB Stock and worry about it from there. That way, if you get screwed up, folks have a baseline to assist you from, and can "unwind" whatever it is you have managed to do to yourself.
Okay! i soft bricked my phone, reflashed to stock (gingerbread 2.3.6) with heimdall, Rooted. Installed Rom manager and CWM from it.
But everytimes i try to get into recovery, it's Android system recovery <3e> and not CWM.
This is really driving me crazy.
Well rom manager is known as rom mangler for this phone.
If you are on GB use heimdall to return to stock. Then use heimdall to load a custom GB rooted kernel to get CWM on it. From there you can choose to do CM9 or etc
Sent from my SGH-T959V using xda premium
fabricatedhero said:
Well rom manager is known as rom mangler for this phone.
If you are on GB use heimdall to return to stock. Then use heimdall to load a custom GB rooted kernel to get CWM on it. From there you can choose to do CM9 or etc
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
could you suggest a kernel? I'm already on stock.
Check out
http://forum.xda-developers.com/showthread.php?t=1480418
There are 4 kernels listed...I'm using AntonX's Almost Basic...no problems.
DickyG said:
Check out
http://forum.xda-developers.com/showthread.php?t=1480418
There are 4 kernels listed...I'm using AntonX's Almost Basic...no problems.
Click to expand...
Click to collapse
It works! Thanks for the link.