I've done this twice but tried to flash an updated kernal via odin and the result ends in a brick. I'm running Octane v2 and was flashing the KJ3 version. I can't remember what I was running before, but did the same thing as well. What gives?
Hard to say without more detail. You said you were trying to flash a kernel on top of Octane but, to my knowledge, no one has put a KJ3 kernel out there. You may be flashing a new ROM vs a kernel.
If you are trying to flash a new ROM (KJ3 in this case) to replace Octane, then you need to insure you don't have voodoo enabled when flashing a stock ROM as stock ROMs cannot read the ext4 filesystem.
If you've already flashed a stock KJ3 ROM, download drhonk's KJ1 kernel with root/cwm/voodoo, flash it via ODIN, let the phone boot, reboot into recovery, disable all voodoo, reboot the phone, then you should be in a good place to flash whatever GB ROM you want.
I meant KJ1 kernel. I already had octane flashed but flashing the kernel via Odin, it bricks. I don't want to flash thru cwm for fear of the same
Sent from my SGH-T959V using xda premium
Interesting. When you say it bricks, what exactly happens?
stephen_w said:
Interesting. When you say it bricks, what exactly happens?
Click to expand...
Click to collapse
I get no response from the screen, power button, or touch keys. It wont even respond to my JIG. It'll respond to the pc when I have odin open to let me know it's connected, but other than that, almost like a dead rock. When I odin it, It will flash with just the blue status bar.
If you're using Odin, could it be that you're flashing the kernel in the wrong slot?
It could also be a bad download.
I just flashed Octane v2.X two days ago, and I flashed the KI3 kernel through CWM. Everything worked fine for me.
bkoon1218 said:
If you're using Odin, could it be that you're flashing the kernel in the wrong slot?
It could also be a bad download.
I just flashed Octane v2.X two days ago, and I flashed the KI3 kernel through CWM. Everything worked fine for me.
Click to expand...
Click to collapse
Its supposed to go into the pda slot right?
Sent from my SGH-T959V using xda premium
Yes, it goes into PDA. As suggested it might be a bad download.
Sent from my SGH-T959V using XDA App
Related
I had an error on my phone so I used odin to completely restore my phone. After using odin and trying several rims including audiophile frayo and redux icbinb gb and the audiophile gb rom. The only rom that will install is blackice stable2, I have reformatted my memory card redownloaded every rom and still none will install, please help me out on this. Any other installed rom will vibrate while on the sgs4g screen.
Sent from my SGH-T959V using XDA Premium App
lol. you somehow managed to install the most difficult rom. lol.
flash kc1, with all of the different files. get cwm ORANGE. flash the rfs converter. then boot the phone and let it start up completely. once you do that, shut down completely. odin to kg4. boot up completely. then flash drhonks kernel. make sure voodoo is disabled. boot phone completely. reflash kh2 or w/e. let me know how that goes. voodoo may be your problem. disabling and flashing is not enough. you have to let it convert completely.
jager555 said:
lol. you somehow managed to install the most difficult rom. lol.
flash kc1, with all of the different files. get cwm ORANGE. flash the rfs converter. then boot the phone and let it start up completely. once you do that, shut down completely. odin to kg4. boot up completely. then flash drhonks kernel. make sure voodoo is disabled. boot phone completely. reflash kh2 or w/e. let me know how that goes. voodoo may be your problem. disabling and flashing is not enough. you have to let it convert completely.
Click to expand...
Click to collapse
I will try that I had trouble finding the kc1 today. Hopefully I will be able to find it tomorrow.
Sent from my SGH-T959V using XDA Premium App
alright i've been up all night and i have no idea what i did. i guess we'll start from the top.
one clicked rooted
downloaded rom manager
installed cwm
installed bionix frost rom
decided to mess with voodoo
and where it gets messy...
wanted to try out a gingerbread rom, so flashed after a full wipe
forgot to turn off voodoo
now when i try to get to the recovery screen, its all garbled. sometimes it doesnt even come up.
on top of that, i cant mount the sd card anyway. what should i do?
Do not use rom manager use the cmw from krylons post. To install gb you need gb bootloaders. So. Install kg4 leak by chadster than isnatll kg4 kernel than flash your gb rom thru cmw and walla..
Sent from my SGH-T959V using XDA App
I got used Odin to flash that hawk.zip from another post to get it back to stock. I've never really dealt with partitions before, so it'll take some getting used to making sure everything is mounted.
Wouldn't work on my computer and I was up all night trying to figure out how to wipe and flash from adb lol. Feels good to finally get some sleep.
I'll make sure to read guides more throughly before flashing on phones I don't own lol.
Sent from my HTC Doubleshot using xda premium
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
bfitzpatrickd2d said:
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
Click to expand...
Click to collapse
sounds like it's connecting fine.. and you described it right, flash the stock rom in Odin first and boot up to make sure it works or do some minor set-up, then flash the latest 8/17 CWM in Odin and immediately boot into it after, make the backup then flash whatever rom/kernel you want (Gummy 2.0 has one included and will enable voodoo lagfix on first boot)
not that hard once you do it once or twice and kinda learn how it all works and whatnot
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
CWM
http://forum.xda-developers.com/showthread.php?t=1112804
Stock (though not the latest as Gummy is based off the slightly older EP1W)
http://forum.xda-developers.com/showthread.php?t=1260214
Gummy 2.0/2.1
http://rootzwiki.com/topic/5643-romep1wcwmgummycharged-gbe-21-10242011/
GB Voodoo Lagfix Kernel (I'd recommend version 3.0.0+)
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
and no the stock rom does not include a custom voodoo kernel but the Gummy 2.0 package does so it will install the kernel and rom and enable voodoo lagfix on first boot (the Gummy rom package includes version 2.2.5 of that kernel I linked so it's a bit old, you can update it if you want by flashing the new one in CWM afterwards)
bfitzpatrickd2d said:
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
you don't really need to format the sd card as everything android related (not phone #'s or pictures or anything *you* put on there) will be wiped when you do the wipes in CWM
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
and it doesn't matter what baseband I am on currently I just do what is listed above and thought about removing simple just to be safe
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
no no no stock rom in PDA first, boot up after the flash, power down and connect to Odin again and put CWM in PDA (everything goes in PDA) and flash then unplug phone after it passes and immediately boot into CWM no regular boot up.. then wipe data, dalvik (under advanced) and cache then flash Gummy or rom of your choice (custom rom build must match stock build like stock EP1W with EP1W Gummy 2.0), select reboot phone option and let the kernel activate voodoo lagfix when it boots up (may take a while)... once it starts you'll have a rooted voodoo custom rom, then you can hold the power button down until the reboot options menu comes up and select recovery to proceed to flash the updated kernel if you want
also the modems will be the ones installed with the stock rom, but you can flash new ones in Odin in the PDA section if you want
blazing through on my 4G Droid Charge
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
lol no problem and yeah its better to be careful at first.. also that guy's videos are good I should've thought to recommend them
blazing through on my 4G Droid Charge
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
bfitzpatrickd2d said:
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
Click to expand...
Click to collapse
yeah that one will work fine, I use it since I don't do nandroid backups much.. I think there's a download link in the OP of that kernel thread at rootzwiki
blazing through on my 4G Droid Charge
sweet thanks
Sent from my SCH-I510 using xda premium
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
probably because the rom didn't include a custom kernel or for whatever reason it didn't make it work.. flash or reflash a custom kernel and there won't be any more problems
blazing through on my 4G Droid Charge
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
When in cwm, choose to install zip from SD card and go all the way to bottom and select "update.zip" and if it doesn't reboot, select reboot now and it should boot into Red CWM. That might do it i think
Froggys go ribbet
joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
Kevinr678 said:
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.
joho5 said:
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.
Click to expand...
Click to collapse
Well you need to have a kernel with voodoo enabled like Entropy's or you can't get red cwm. The stock leaks HAVE to have a stock kernel for video to work however. Oh, and yes you can. You can do that or through SGS Kernel Flasher on the market. What do you need red for anyway?
Don't forget, if I helped you, hit thanks please
Sent from my SAMSUNG-SGH-I997 using xda premium
I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?
So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.
I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.
Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium
jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium
basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.
hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad
agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.
agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2