Database Info

[ROM][CWM][Gingerbread 2.3.3] Deodexed T959VUVKF1 [Root + Busybox][EDT][6.182011]

This was requested by dsexton702 and a few others. This is a fully deodexed build of the just released 2.3.3 Gingerbread T959VUVKF1 build.
THIS DOES NOT CONTAIN A BOOT.BIN OR SBL.BIN!!!
What's included
~ Fully Deodexed Build
~ Root
~ Busybox 1.19.0
~ All Bloat
~ Annoying Bootup and Shutdown sounds
~ Love, Warmth and Tenderness
joedeveloper said:
Just to clarify for those still wondering...
Scenario you're on FROYO/KD1/BIONIX/TRIGGER etc:
ODIN The gingerbread leak - http://forum.xda-developers.com/show....php?t=1125747 (this will load the GB bootloaders which were not put into the deodexed KF1 CWM flashable due to the potential for hard bricking your phone)
Then you will need to ODIN back to FROYO KD1 (so that you can use CWM)
Then reboot into CWM and flash the Deodexed KF1. (so it will flash deodexed KF1, now that you have GB bootloaders from ODIN'ing GB/KF1)
Scenario you're on Gingerbread/KF1:
Then you will need to ODIN back to FROYO KD1
Then reboot into CWM and flash the Deodexed KF1.
Click to expand...
Click to collapse
Changelog
Code:
6/18/2011 - Added in CSC files and working camera.apk
6/17/2011 - Initial release
MUST BE FLASHED FROM CWM VIA FROYO!!!
DOWNLOAD <<<<< DEODEXED KF1
MD5: 2437A5AF9691024D7635B57D526F29DE
Additional Add-ons - attached at bottom of page
Files are NOT flashable. They need to be moved manually with root explorer. After moving be sure to set permissions to rw-r--r--
~ framework-res with crt animation enabled (goes in /system/framework)
~ working camera.apk (included in latest release) (goes in /system/app)
CREDITS
~ Samfirmware for the leak!

ok guys now to install this you are going to have to downgrade to froyo so we can use CWM
IF YOU DONT HAVE THE GB ROM YET DONT WORRY ABOUT DOWNGRADING
however that will change soon thanks to krylon (we will have GB cwm)
anyways once you get back to froyo its the same old same old
CHECK YOUR MOUNTS and flash the rom
have fun flashing GB super easy now with root
THANKS WHITEHAWKX
YOU ARE THE MASTER WHICH IS WHY I ASKED YOU!!!!

dsexton702 said:
ok guys now to install this you are going to have to downgrade to froyo so we can use CWM
however that will change soon thanks to krylon (we will have GB cwm)
anyways once you get back to froyo its the same old same old
CHECK YOUR MOUNTS and flash the rom
have fun flashing GB super easy now with root
THANKS WHITEHAWKX
YOU ARE THE MASTER WHICH IS WHY I ASKED YOU!!!!
Click to expand...
Click to collapse
Sweet! This is cranking!

Are there specific flashing instructions through CWM?
Sent from my SGH-T959V using XDA Premium App

He never ceases to amaze does he...?

hate to ask, but screenshots please?

What's the importance of the Boot.bin and SBL.bin files ?

radness. thanks!

Are there any known issues with this release?
Sent from my SGH-T959V using XDA Premium App

orionshock said:
What's the importance of the Boot.bin and SBL.bin files ?
Click to expand...
Click to collapse
Primary and secondary bootloader files
Sent from my SGH-T959V using Tapatalk

original froyo boot and spl files from froyo?

Umm what you mean CWM froyo?..Can I flash this conning from bionix?
Sent from my SGH-T959V using XDA App

I need the original bootloader files from froyo, i was on GB

Guys, if you've already odin'd Gingerbread all you need to do is get back to any froyo rom so you can use cwm to flash this. There are no issues with this rom.
airfluip1 said:
I need the original bootloader files from froyo, i was on GB
Click to expand...
Click to collapse
You do not need froyo bootloaders. If you have the GB bootloaders then you're fine

Whitehawkx comes out of nowhere and rescues everybody once more!!!

Whitehawkx said:
Guys, if you've already odin'd Gingerbread all you need to do is get back to any froyo rom so you can use cwm to flash this. There are no issues with this rom.
You do not need froyo bootloaders. If you have the GB bootloaders then you're fine
Click to expand...
Click to collapse
yea guys how was i not clear about this?

Off the hook Whitehawkx! Thanks for this awesomeness. So... mounts set the same as for bionix etc? Showing -unmount -mount -mount -unmount in cwm?
Sent from my SGH-T959V using XDA Premium App

Sorry double post.

how will get into recovery with the 3 buttons?

Does this mean that we can now convert the File system to ext4 before flashing Gingerbread thru cwm?

[ROM][CWM] KG4+Root 7/25/11 Airfluip1 Odexed

This is the Gingerbread KG4 leak + root.
This is completely stock and contains all bloat.
Instructions:
1. Odin Kd1 and KG4 Bootloaders(for Modded Recovery)
2. Boot into CWM recovery
3. Make sure mounts are correct
4. Flash via CWM
Let me know if any bugs are found.
Here is the Download
LINK

which odin file has the KG4 Bootloaders?

Infact,
Download and flash the leaked KG4.
It has the boot loaders.
Then flash Whitehawkx deodexed KD1.
You will now have the KG4 Bootloaders and the KD1 modded recovery.
Boot into recovery, load up CWM and flash. Let me know if you have any problems.

nice job flip ill have to tear it apart and lol do my majik
oh and if ur host gives issues let me know ill put it up on sourceforge for ya

Awesome! Is this the fixed root which does not break audio?
Sent from my SGH-T959V using Tapatalk

Hey,
Thanks guys.
I haven't tested it myself.
I hope its root works
it may not even have a working root.
For best results, I know ChainsDD has a flash able super user.
Use that after flashing.
For the audio, this should have working audio.
It will reinstall all the root stuff without causing kernel issues.

VICosPhi said:
Awesome! Is this the fixed root which does not break audio?
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
+1 on this too

I have working audio with the original root for gb not sure why you'res breaks
sent from my sgs4g 2.3.3, finally

airfluip1 said:
This is the Gingerbread KG4 leak + root.
This is completely stock and contains all bloat.
Instructions:
1. Odin Kd1 and KG4 Bootloaders(for Modded Recovery)
2. Boot into CWM recovery
3. Make sure mounts are correct
4. Flash via CWM
Let me know if any bugs are found.
Here is the Download
LINK
Click to expand...
Click to collapse
Nice! good job!!!

dsexton702 said:
I have working audio with the original root for gb not sure why you'res breaks
sent from my sgs4g 2.3.3, finally
Click to expand...
Click to collapse
+1 no audio problems here with original root method. Flashed both zimages using heimdall.

airfluip1 said:
Infact,
Download and flash the leaked KG4.
It has the boot loaders.
Then flash Whitehawkx deodexed KD1.
You will now have the KG4 Bootloaders and the KD1 modded recovery.
Boot into recovery, load up CWM and flash. Let me know if you have any problems.
Click to expand...
Click to collapse
I followed these steps but after i flashed it it got a boot loop... any idea?
It vibrates during the boot loops
I now pulled the battery and went to recovery but when it doesnt give me the option to reinstall packages and when i go to apply update from sdcard it says installation aborted

I will take a look tomorrow.
Sent from my SGH-T959V using XDA App

brandond15 said:
I followed these steps but after i flashed it it got a boot loop... any idea?
It vibrates during the boot loops
I now pulled the battery and went to recovery but when it doesnt give me the option to reinstall packages and when i go to apply update from sdcard it says installation aborted
Click to expand...
Click to collapse
+1 on this.. I get the exact same thing after flashing.

Ill just odin back to the leaked 2.3.4 until its working...if you need to test an updated one ill test it

kkoshko1 said:
+1 no audio problems here with original root method. Flashed both zimages using heimdall.
Click to expand...
Click to collapse
Audio works fine for me except during startup boot animation and also during wifi calling. Turning volume to 100% only gives you an effect of 15% volume for wifi calling and no audio for startup animation.

I don't think Whitehawkx ODIN KD1 has the modified recovery.. I flashed that rom a few times, and always had to push the modded recovery file into system\bin to get CWM.
I think that's why you guys are boot looping.

well one of his KD1's has it, I always flash it when need to go from GB to a CWM rom. It always works.
The file name is called PDA_KD1.tar

ah, maybe I'm thinking of KC1 then. Whitehawkx KD1 was stated to sometimes cause a bad file system though, which can affect future ROM flashes.

help
after flashing this ROM, my hpoone gt at blurred sbootanimation and it keeps on rebooting. it seems that it ruined my ROM, help me please.

hey airfluip1 thank you very much for making this but i as well get a boot loop do you think you could make a odin flashable version of this please that would help me out alot thanks again for everything.

[Q] rooting questions, device drivers etc..

so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...

bfitzpatrickd2d said:
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
Click to expand...
Click to collapse
sounds like it's connecting fine.. and you described it right, flash the stock rom in Odin first and boot up to make sure it works or do some minor set-up, then flash the latest 8/17 CWM in Odin and immediately boot into it after, make the backup then flash whatever rom/kernel you want (Gummy 2.0 has one included and will enable voodoo lagfix on first boot)
not that hard once you do it once or twice and kinda learn how it all works and whatnot

do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium

what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
CWM
http://forum.xda-developers.com/showthread.php?t=1112804
Stock (though not the latest as Gummy is based off the slightly older EP1W)
http://forum.xda-developers.com/showthread.php?t=1260214
Gummy 2.0/2.1
http://rootzwiki.com/topic/5643-romep1wcwmgummycharged-gbe-21-10242011/
GB Voodoo Lagfix Kernel (I'd recommend version 3.0.0+)
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
and no the stock rom does not include a custom voodoo kernel but the Gummy 2.0 package does so it will install the kernel and rom and enable voodoo lagfix on first boot (the Gummy rom package includes version 2.2.5 of that kernel I linked so it's a bit old, you can update it if you want by flashing the new one in CWM afterwards)
bfitzpatrickd2d said:
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
you don't really need to format the sd card as everything android related (not phone #'s or pictures or anything *you* put on there) will be wiped when you do the wipes in CWM

thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium

and it doesn't matter what baseband I am on currently I just do what is listed above and thought about removing simple just to be safe
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
no no no stock rom in PDA first, boot up after the flash, power down and connect to Odin again and put CWM in PDA (everything goes in PDA) and flash then unplug phone after it passes and immediately boot into CWM no regular boot up.. then wipe data, dalvik (under advanced) and cache then flash Gummy or rom of your choice (custom rom build must match stock build like stock EP1W with EP1W Gummy 2.0), select reboot phone option and let the kernel activate voodoo lagfix when it boots up (may take a while)... once it starts you'll have a rooted voodoo custom rom, then you can hold the power button down until the reboot options menu comes up and select recovery to proceed to flash the updated kernel if you want
also the modems will be the ones installed with the stock rom, but you can flash new ones in Odin in the PDA section if you want
blazing through on my 4G Droid Charge

thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
lol no problem and yeah its better to be careful at first.. also that guy's videos are good I should've thought to recommend them
blazing through on my 4G Droid Charge

one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.

bfitzpatrickd2d said:
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
Click to expand...
Click to collapse
yeah that one will work fine, I use it since I don't do nandroid backups much.. I think there's a download link in the OP of that kernel thread at rootzwiki
blazing through on my 4G Droid Charge

sweet thanks
Sent from my SCH-I510 using xda premium

last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
probably because the rom didn't include a custom kernel or for whatever reason it didn't make it work.. flash or reflash a custom kernel and there won't be any more problems
blazing through on my 4G Droid Charge

[ROM]SGH_I997 UCKL2(Rooted, Deodexed, and Busybox)(CRT off)

Heres the rooted version....
Rooted
Deodexed
Busybox installed
Crt off animation(cause stock is boring.. )
Installation:
1 Download zip
2 Boot into CWM
3 Wipe data, cache and dalvik cache
4 Choose zip from sd card
5 flash zip
6 reboot and let media scanner run and sit for a few and let it settlle and sync accounts.
7 Enjoy
To get video back flash stock kernel with sgs kernel flasher here:http://www.multiupload.com/PP69TXBEA5
UNPACK RAR AND FLASH ZIMAGE ONLY!
OKAY....I HAVE NOT PERSONALLY HAD THIS ISSUE, BUT TO BE SAFE, BEFORE FLASHING STOCK KERNEL , BOOT INTO CWM, SCROLL DOWN TO VOODOO AND DISABLE VOODOO LAGFIX. WHEN IT BOOTS YOU WILL HERE THE SEXY LADY DISABLING VOODOO. WHEN IT FULLY BOOTS BACK UP YOU SHOULD BE ABLE TO FLASH STOCK KERNEL WITHOUT ISSUES.
ONCE AGAIN, I AM NOT RESPONSIBLE IF YOUR PHONE SPONTANEOUSLY COMBUSTS...
Download Rom Here

Thanks going to try it out
Sent from my SGH-I997 using xda premium

Man you're fast. I just got the leak, didn't even have time to uncompress it.

Excellent. So if we flash the stock kernel and get video working again, what are we losing in the process? Sorry if this is a noobish question, I'm just now switching from galnet MIUI.

Shouldnt lose anything...and you will keep root also...
Sent from my SAMSUNG-SGH-I997 using xda premium

You gain video and hdmi back. You may have to make a slight change to one of the void files if you lose access to your CD card.

I see. Thank you for the help! I was told about this file before, but when I tried editing it last time I messed it up... don't you edit the last value to a different number or something? Do you know what number that is? Thank you guys for the help, I really do appreciate it, what with all these awesome leaks. :]

Truckerglenn said:
You gain video and hdmi back. You may have to make a slight change to one of the void files if you lose access to your CD card.
Click to expand...
Click to collapse
You will also lose your voodoo filesystem optimizations, init scripting support and the charginghacks/undervolt capabilities (if you like Entropy's kernel).

Well I enjoyed it for 5 minutes before going back to cm7 with thunder script but I still appericate the upload as something different always looking for my next rom fix.
Sent from my SGH-I997 using xda premium

You either change a 3 to a 2 or a 2 to a 1 forget which right now.
Go here for the correct fix for the SD Card: http://forum.xda-developers.com/showpost.php?p=19908483&postcount=24

Truckerglenn said:
You either change a 3 to a 2 or a 2 to a 1 forget which right now.
Click to expand...
Click to collapse
If you have flashed the stock kernel and want external SD: In vold.fstab, in the line that starts with dev_mount sdcard1, change from mmc2 to mmc1

I feel pretty dumb right now. I flashed the leak and then uses sgs kernel flasher to flash the stock kernel and my phone is now stuck at the Samsung splash screen upon reboot. I let it sit there for about 10 minutes. Now, I can't even get back to recovery mode. Could someone provide some advice?

Did u pull the zimage out of the rar fike? or did you flash the rar file?? i posted in op to unpack the zimage from the rar file...i know it works becaise i flashed the stock kernel and am runni.g it now....running great actually
Sent from my SAMSUNG-SGH-I997 using xda premium

devilock138 said:
I feel pretty dumb right now. I flashed the leak and then uses sgs kernel flasher to flash the stock kernel and my phone is now stuck at the Samsung splash screen upon reboot. I let it sit there for about 10 minutes. Now, I can't even get back to recovery mode. Could someone provide some advice?
Click to expand...
Click to collapse
Don't you have to convert you file system back before flashing the stock rom?

Yes, I unpacked the zimage file from the .rar and sgs kernel flasher rebooted the phone automatically after applying it.
---------- Post added at 09:09 PM ---------- Previous post was at 09:09 PM ----------
rxnelson said:
Don't you have to convert you file system back before flashing the stock rom?
Click to expand...
Click to collapse
I didn't realize that this used a different filesystem

No you dont...i didnt..runs great
Sent from my SAMSUNG-SGH-I997 using xda premium

devilock138 said:
I didn't realize that this used a different filesystem
Click to expand...
Click to collapse
Did you disable voodoo lagfix in recovery before flashing the stock kernel? Not doing that can cause issues, if I'm understanding this correctly.

You dont have to disable voodoo....all i did was flash thru sgs and it booted up fine...if you are stuck however then disabling voodoo might fix your problem
Sent from my SAMSUNG-SGH-I997 using xda premium

jscott30 said:
Did you disable voodoo lagfix in recovery before flashing the stock kernel? Not doing that can cause issues, if I'm understanding this correctly.
EDIT: Nevermind - I don't know what I'm talking about in this case. That's not it.
Click to expand...
Click to collapse
No, I don't believe I had any lagfixes.
I was running stock froyo with only root and cwm installed
I downloaded the .zip for the leak
booted into recovery and wiped data/cache/dalvik
flashed the leak
phone booted up fine
installed sgs kernel flasher from the market
extracted zimage file from the .rar in the op
used sgs kernel flasher to flash the kernel
phone rebooted and now stuck at samsung screen
I've pulled the battery and then tried to reenter recovery mode, but no dice
I am going to try unbrick through download mode and heimdal

Ok..well i didnt know you were coming from froyo...i dont know how flashing this from froyo would work since i cant even remember when i ran froyo last. I came from my catyrom....might need to be on gingerbread with gingerbread bootloaders ...
Sent from my SAMSUNG-SGH-I997 using xda premium

[Q] Trying to flash CWM

So here is my dilemma. I have the Galaxy S4g the stock firmware version 2.3.6 gingerbread. Since this update, my phone has become less and less stable. I therefore would like to try out some custom roms. I have my device rooted using superoneclick root.
Tried to flash CWM Final, following the instructions, including pasting recovery in the system/bin folder. Further research led me to the understanding that just using this method will not work with a device running 2.3.6.
Problem one, was when I tried to paste the recovery file, there was not in the /bin folder. I did notice that the recovery file is in the root directory of the phone. Can I replace this recovery file with the modified one in the root directory, and then will this allow me to flash CWM ?
If not, is it possible to even flash cwm onto the GS4G? IF so, I am sure that there is a how to out there somewhere.
Some help would be greatly appreciated here.
Deckard67

Flash this:
http://forum.xda-developers.com/showthread.php?t=1380331

Try flashing the KJ1 Dr honk kernel with Odin in the following link
http://forum.xda-developers.com/showthread.php?t=1194032
I feel its the fastest way to get cwm then in cwm you can flash whatever rom you want and then flash bhund kernel as mentioned above.
Sent from my SGH-T959V using XDA App

erikmm said:
Try flashing the KJ1 Dr honk kernel with Odin in the following link
http://forum.xda-developers.com/showthread.php?t=1194032
I feel its the fastest way to get cwm then in cwm you can flash whatever rom you want and then flash bhund kernel as mentioned above.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Liberate youself from the evil path of Odin, and learn Heimdall.
Sent from my SGH-T959V using xda premium

FBis251 said:
Flash this:
http://forum.xda-developers.com/showthread.php?t=1380331
Click to expand...
Click to collapse
I think fb meant: http://forum.xda-developers.com/showthread.php?p=20067583
Sent from my SGH-T959V using xda premium

I had the same issue. recovery goes in sysbin folder.
next make sure the rom you eventually would like to use is in your root.
next you'll have to use heimedall and flash the appropriate kernal (kj6 is what I used, from here: http://forum.xda-developers.com/showthread.php?t=1380331
reboot after that and make your necessary changes to the mount system as required by the dev of your desired rom, and follow their instructions to flash.

bhundven said:
Liberate youself from the evil path of Odin, and learn Heimdall.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Lol +1
Sent from my SGH-T959V using XDA App