This is the Gingerbread KG4 leak + root.
This is completely stock and contains all bloat.
Instructions:
1. Odin Kd1 and KG4 Bootloaders(for Modded Recovery)
2. Boot into CWM recovery
3. Make sure mounts are correct
4. Flash via CWM
Let me know if any bugs are found.
Here is the Download
LINK
which odin file has the KG4 Bootloaders?
Infact,
Download and flash the leaked KG4.
It has the boot loaders.
Then flash Whitehawkx deodexed KD1.
You will now have the KG4 Bootloaders and the KD1 modded recovery.
Boot into recovery, load up CWM and flash. Let me know if you have any problems.
nice job flip ill have to tear it apart and lol do my majik
oh and if ur host gives issues let me know ill put it up on sourceforge for ya
Awesome! Is this the fixed root which does not break audio?
Sent from my SGH-T959V using Tapatalk
Hey,
Thanks guys.
I haven't tested it myself.
I hope its root works
it may not even have a working root.
For best results, I know ChainsDD has a flash able super user.
Use that after flashing.
For the audio, this should have working audio.
It will reinstall all the root stuff without causing kernel issues.
VICosPhi said:
Awesome! Is this the fixed root which does not break audio?
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
+1 on this too
I have working audio with the original root for gb not sure why you'res breaks
sent from my sgs4g 2.3.3, finally
airfluip1 said:
This is the Gingerbread KG4 leak + root.
This is completely stock and contains all bloat.
Instructions:
1. Odin Kd1 and KG4 Bootloaders(for Modded Recovery)
2. Boot into CWM recovery
3. Make sure mounts are correct
4. Flash via CWM
Let me know if any bugs are found.
Here is the Download
LINK
Click to expand...
Click to collapse
Nice! good job!!!
dsexton702 said:
I have working audio with the original root for gb not sure why you'res breaks
sent from my sgs4g 2.3.3, finally
Click to expand...
Click to collapse
+1 no audio problems here with original root method. Flashed both zimages using heimdall.
airfluip1 said:
Infact,
Download and flash the leaked KG4.
It has the boot loaders.
Then flash Whitehawkx deodexed KD1.
You will now have the KG4 Bootloaders and the KD1 modded recovery.
Boot into recovery, load up CWM and flash. Let me know if you have any problems.
Click to expand...
Click to collapse
I followed these steps but after i flashed it it got a boot loop... any idea?
It vibrates during the boot loops
I now pulled the battery and went to recovery but when it doesnt give me the option to reinstall packages and when i go to apply update from sdcard it says installation aborted
I will take a look tomorrow.
Sent from my SGH-T959V using XDA App
brandond15 said:
I followed these steps but after i flashed it it got a boot loop... any idea?
It vibrates during the boot loops
I now pulled the battery and went to recovery but when it doesnt give me the option to reinstall packages and when i go to apply update from sdcard it says installation aborted
Click to expand...
Click to collapse
+1 on this.. I get the exact same thing after flashing.
Ill just odin back to the leaked 2.3.4 until its working...if you need to test an updated one ill test it
kkoshko1 said:
+1 no audio problems here with original root method. Flashed both zimages using heimdall.
Click to expand...
Click to collapse
Audio works fine for me except during startup boot animation and also during wifi calling. Turning volume to 100% only gives you an effect of 15% volume for wifi calling and no audio for startup animation.
I don't think Whitehawkx ODIN KD1 has the modified recovery.. I flashed that rom a few times, and always had to push the modded recovery file into system\bin to get CWM.
I think that's why you guys are boot looping.
well one of his KD1's has it, I always flash it when need to go from GB to a CWM rom. It always works.
The file name is called PDA_KD1.tar
ah, maybe I'm thinking of KC1 then. Whitehawkx KD1 was stated to sometimes cause a bad file system though, which can affect future ROM flashes.
help
after flashing this ROM, my hpoone gt at blurred sbootanimation and it keeps on rebooting. it seems that it ruined my ROM, help me please.
hey airfluip1 thank you very much for making this but i as well get a boot loop do you think you could make a odin flashable version of this please that would help me out alot thanks again for everything.
Related
These are modded stock kernel from all gingerbread leak. I didn't change anything to these kernel, they are pure stock but did added few mods to it.
Things I added:
- CWM Recovery (Voodoo Red).
- Voodoo lagfix (it will convert /system, /data, and /cache partition to ext4 during first boot)
- Auto root (kernel will automatically root your GB ROM if its not rooted and install superuser.apk)
Installation procedure for RAW LEAK version:
- Install kernel using ODIN version, phone will reboot automatically.
- Go to recovery (adb reboot recovery).
- Disable voodoo
- Reboot
- Install busybox from market
- Go to recovery (adb reboot recovery)
- Enable voodoo
- Reboot
ODIN version:
stock+Voodoo-T959VKG4.tar
stock+Voodoo-T959VKG6.tar
stock+Voodoo-T959VKH2.tar
stock+Voodoo-T959VKI1.tar
stock+Voodoo-T959VKI3.tar
stock+Voodoo-T959VKJ1.tar
CWM Flashable:
stock+Voodoo-T959VKG4-unsigned-update.zip
stock+Voodoo-T959VKG6-unsigned-update.zip
stock+Voodoo-T959VKH2-unsigned-update.zip
stock+Voodoo-T959VKI1-unsigned-update.zip
stock+Voodoo-T959VKI3-unsigned-update.zip
stock+Voodoo-T959VKJ1-unsigned-update.zip
Great work as usual dr. honk!
Sent from my SGH-T959V using XDA Premium App
ty honk as per usual
great work
Brilliant thank you dr honk and team whiskey!
Sent from my SGH-T959V using XDA App
Thanks man for the hard work..
but have a problem do you flash this in phone,pda, or bootloader i tried all 4 option and it doesnt move what so ever
CozzaFrenzyy said:
Brilliant thank you dr honk and team whiskey!
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
This is awesome drhonk is a genius.
sent from my honey 3d themed unity 1.29 using XDA premium app
Oh man...!!!! Now I have to flash kg4 bootloaders
Sent from my SGH-T959V using XDA App
Now im at a totally balnk screen still in download mode took the battery out put it back in and its a black screen still in DM..
Actually where can i find the bootloaders? I flashed hawks deodexed sans the bootloaders. will I have to extract from original leak? Or should I still be on froyo cause I can't get into recovery on this rom
Sent from my SGH-T959V using XDA App
im flashing back to KD1 then ill flash the debloated version then ill odin this kernal see if that works
Damn! Now I have to switch to Gingerbread. Great work drhonk!
Thank You! You are the Man!
So... my kernel flash failed, and I got the "Firmware upgrade encountered an issue." message... Am I screwed? or should I still be able to enter download mode?
EDIT: Scratch that, it took a bit, but my phone appeared in Odin again. No worries
DOUBLE EDIT: This just flashes in the 'PDA' field right? I'm not doing anything wrong?
AThis sounds like good news, if only i understood what most of the stuff meant. Can someone give me accurate, precise directions on flashing this, it would be greatly appreciated. Current info: I'm on balil 3.3UV kernel, ICBINB, and kf2 modem. Thanks for all the help awesome community! Thanks to drhonk for making this kernel too!
mine still hangs wen i try to odin this file
richielasalsa said:
mine still hangs wen i try to odin this file
Click to expand...
Click to collapse
That's what's happening to me. I wonder... if we replace the one in the leak and flash that, should it work?
Truly brilliant work drhonk. Thank you once again for your superior dev work on this phone.
Sent from my SGH-T959V using XDA Premium App
GDofWR420 said:
Truly brilliant work drhonk. Thank you once again for your superior dev work on this phone.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I'm assuming that it worked perfectly for you?
which slot does this get flashed from bootloader, pda, phone, or csc
drhonk said:
This is a modded stock kernel from the latest gingerbread leak, UVKG4. I didn't change anything to the kernel, it's pure stock but did added few mods to it. In theory .. this kernel should work with any GB leak for SGS4G as long as you're still on Froyo bootloader or KG4 bootloader, otherwise you won't be able to get to recovery.
Things I added:
- CWM Recovery (Voodoo Red).
- Voodoo lagfix (it will convert /system, /data, and /cache partition to ext4 during first boot)
- Auto root (kernel will automatically root your GB ROM if its not rooted and install superuser.apk)
NOTE:
This is ODIN file, use ODIN to flash this kernel .. if you don't know how, google it.
T959VUVKG4_Kernel_CWM_Voodoo.tar
Click to expand...
Click to collapse
Humans, (and some others),
To flash. Put it into PDA on ODIN, or extract it and put the zImage in Heimdall.
Thanks
airfluip1 said:
Humans, (and some others),
To flash. Put it into PDA on ODIN, or extract it and put the zImage in Heimdall.
Click to expand...
Click to collapse
Sent from my SGH-T959V using XDA App
When I try to flash CWM, I get a signature verification fail error. I replaced the recovery binary but it still won't work.
I am using this rom: http://forum.xda-developers.com/showthread.php?t=1139326
Does anyone know a fix for this?
The link is broken... Have tried to Odin one of Dr Honk's kernels?
Sent from my SGH-T959V using xda premium
The link is working again. It looks like that kernel needs adb to access recovery, which I haven't been able to get to work. Do you have any other ideas?
Eraser310 said:
The link is working again. It looks like that kernel needs adb to access recovery, which I haven't been able to get to work. Do you have any other ideas?
Click to expand...
Click to collapse
I'm not sure what you mean by this. Are you just trying to get it into recovery? If so, do you have the Android software developer kit (SDK) installed? The SDK includes the adb binary. Download it, install it, then open a command prompt, cd to the 'platform-tools' directory where the SDK installed, insure your phone is on & plugged in via USB, and issues the command: adb reboot recovery.
If I'm off-base with what you're trying to accomplish, my apologies.
Eraser310 said:
When I try to flash CWM, I get a signature verification fail error. I replaced the recovery binary but it still won't work.
I am using this rom: http://forum.xda-developers.com/showthread.php?t=1139326
Does anyone know a fix for this?
Click to expand...
Click to collapse
Don't use a KFx rom, the KF1 and KF2 versions of Gingerbread were really buggy and will give you more trouble than they're worth. You're better off flashing Octane, Valhalla or ICBINB which get updated frequently.
FBis251 said:
Don't use a KFx rom, the KF1 and KF2 versions of Gingerbread were really buggy and will give you more trouble than they're worth. You're better off flashing Octane, Valhalla or ICBINB which get updated frequently.
Click to expand...
Click to collapse
Which also means that you need to flash a KG4 leak or newer for the proper GB bootloaders. If not, you'll get a rainbow screen.
Similar Problem
Hey Guys,
I had a similar problem. I am using Fire Expert to overwrite the new recovery to the \system\bin folder. However, I realized my mistake was that I did not mount as r/w. After I did that though and I held the volume up, down and power, I stay stuck at the initial splash screen and can't go into the stock recovery screen. I can't boot regularly either; I have to Odin recover. Any help would be greatly appreciated.
Thanks!
apodictic said:
Hey Guys,
I had a similar problem. I am using Fire Expert to overwrite the new recovery to the \system\bin folder. However, I realized my mistake was that I did not mount as r/w. After I did that though and I held the volume up, down and power, I stay stuck at the initial splash screen and can't go into the stock recovery screen. I can't boot regularly either; I have to Odin recover. Any help would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
Overwriting the old recovery and putting the update.zip file on the sdcard for CWM Final was for Froyo ROMs only, not Gingerbread (GB) ones. What ROM are you currently on?
In order to get into recovery since flashing the GB boot loaders I have to:
Power off the phone
Hold down Volume Up, Volume Down, and the Power button
When the Galaxy S screen comes on, wait a second, it'll get a tad bit brighter. When that happens let go of only the Power button
Wait a few seconds and you should be in recovery
Sounds like you might be a bit goofed at this point, though. If you were on GB before I'd suggest using one of the ROMs in bhundven's The KJ6 Heimdall One-Click Collection. The last one in the list will also give you root, CWM, and voodoo lagfix.
Hey. Thanks for the quick reply.
I am currently on Froyo, Kernal version 2.6.32.9.
Sent from my SGH-T959V using XDA App
apodictic said:
Hey. Thanks for the quick reply.
I am currently on Froyo, Kernal version 2.6.32.9.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Weird. All you should have to do is put the updated recovery in /system/bin & put the update.zip on the root of the sdcard.
What is the current state of the phone? I know in the previous post you said you would have to use ODIN to recover. Did you do that?
Yes I did use Odin to recover. I did it following the link provided in the sgs4g 10 commandments. This is the second time I recovered. After I recovered he first time, I tried the process again and the same thing happened: stuck at the initial splash screen.
Sent from my SGH-T959V using XDA App
apodictic said:
Yes I did use Odin to recover. I did it following the link provided in the sgs4g 10 commandments. This is the second time I recovered. After I recovered he first time, I tried the process again and the same thing happened: stuck at the initial splash screen.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Which step in the 10 Commandments did you follow to recover in ODIN?
What's the current status of the phone?
This is the Odin tutorial I used.
forum.xda-developers.com/showthread.php?t=1001759
Also, I am not too sure what you mean by the current state/status of my phone.
Sent from my SGH-T959V using XDA App
apodictic said:
This is the Odin tutorial I used.
forum.xda-developers.com/showthread.php?t=1001759
Also, I am not too sure what you mean by the current state/status of my phone.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Just wondering if your phone is currently working or not. I wasn't sure given that you reflashed with ODIN.
Yes everything is fine right now. Lucky all of my settings and apps were still there after following that tutorial.
Perhaps file expert doesn't work?
Sent from my SGH-T959V using XDA App
apodictic said:
Yes everything is fine right now. Lucky all of my settings and apps were still there after following that tutorial.
Perhaps file expert doesn't work?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I've not used it but if it allows you to mount /system read/write, then it should work fine as long as you're putting the 'recovery' file in /system/bin & the update.zip on the root of the sdcard.
If you try it again then reboot into recovery, what happens?
FBis251 said:
Don't use a KFx rom, the KF1 and KF2 versions of Gingerbread were really buggy and will give you more trouble than they're worth. You're better off flashing Octane, Valhalla or ICBINB which get updated frequently.
Click to expand...
Click to collapse
can you help me ?
my xperia play literally cant flash at all i go to recovery mode and try to install a rom but it aborts it and says signature error ive tried around 5 roms what shall i do please some one help me
ive tried everything and im a noob i dont know how to flash properly so please be very descriptive pleaseeee
UKemal said:
can you help me ?
my xperia play literally cant flash at all i go to recovery mode and try to install a rom but it aborts it and says signature error ive tried around 5 roms what shall i do please some one help me
ive tried everything and im a noob i dont know how to flash properly so please be very descriptive pleaseeee
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?p=21272961
Well, I attempted to use SGS kernel flasher to install the infuseGB kernel. Now I'm stuck with a bootloop and I need help fixing it.
Anyways, Odin confuses the crap out of me. I put my phone in download mode but all odin does is light up a box with com3 in it. I've reinstalled drivers but I'm not sure what to do next.
All help is appreciated.
I had a similar issue after flashing a kernel that way.
What ended up fixing the boot loop was using Odin to flash the stock Rogers kernel.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
prairied0gg said:
I had a similar issue after flashing a kernel that way.
What ended up fixing the boot loop was using Odin to flash the stock Rogers kernel.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Click to expand...
Click to collapse
I'll try that if I can:
A: figure out how to use odin properly
B: find the stock AT&T kernel
This has turned into one big mess.
Well, I figured that out.
Now what is the proper way to flash a kernel from bone stock?
I'm rooted.
I'm installing 3e recovery.
skatin707 said:
Well, I figured that out.
Now what is the proper way to flash a kernel from bone stock?
I'm rooted.
I'm installing 3e recovery.
Click to expand...
Click to collapse
There's three ways...
1. SGS flasher (obviously not working for you)
2. Flash from recovery if kernel is in a zip file
3. Flash through Odin or Heimdall
Remember to flash a GB kernel you must first be on a GB rom!
Big dog Infuse I997 GB KJ4
bignate78 said:
There's three ways...
1. SGS flasher (obviously not working for you)
2. Flash from recovery if kernel is in a zip file
3. Flash through Odin or Heimdall
Remember to flash a GB kernel you must first be on a GB rom!
Big dog Infuse I997 GB KJ4
Click to expand...
Click to collapse
Ok, I think this is my problem. I'm not on a GB ROM I don't think.
I've got the kernel in zip format. Should I install, say for example, the doctorz ROM and them flash the kernel?
My cwm recovery is dark green,will I still be ok?
Sent from my SAMSUNG-SGH-I997 using xda premium
skatin707 said:
Ok, I think this is my problem. I'm not on a GB ROM I don't think.
I've got the kernel in zip format. Should I install, say for example, the doctorz ROM and them flash the kernel?
My cwm recovery is dark green,will I still be ok?
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
download the attatched kernel zip
Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
Download chosen rom zip and place it on your internal SD card.
Power off your phone.
With the phone powered off, hold both volume keys and the power button for about 10 seconds and then release. This should boot you into RED CWM.
Select "install zip from sdcard" and select chosen rom zip.
Once that finishes, select "wipe data/factory reset".
Select "reboot system now".
once rebooted sgs flash the any GB kernel you want, remember to read and make sure which ever kernel your choosing is GB or Froyo
I flashed it, and thankfully it didn't bootloop. However, my cwm is still green.
Scratch that, we are in the red now! You are a king among men.
Sent from my EPAD using xda premium
Don't know if this helps but my infuse was stuck in a boot loop after adjusting the default launcher. Going into CWM and reflashing the su fix got my phone to boot properly.
wizardofkoz said:
Don't know if this helps but my infuse was stuck in a boot loop after adjusting the default launcher. Going into CWM and reflashing the su fix got my phone to boot properly.
Click to expand...
Click to collapse
Mine was kernel issues.
Sent from my SGH-I997 using xda premium
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
When in cwm, choose to install zip from SD card and go all the way to bottom and select "update.zip" and if it doesn't reboot, select reboot now and it should boot into Red CWM. That might do it i think
Froggys go ribbet
joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
Kevinr678 said:
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.
joho5 said:
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.
Click to expand...
Click to collapse
Well you need to have a kernel with voodoo enabled like Entropy's or you can't get red cwm. The stock leaks HAVE to have a stock kernel for video to work however. Oh, and yes you can. You can do that or through SGS Kernel Flasher on the market. What do you need red for anyway?
Don't forget, if I helped you, hit thanks please
Sent from my SAMSUNG-SGH-I997 using xda premium
Heres the rooted version....
Rooted
Deodexed
Busybox installed
Crt off animation(cause stock is boring.. )
Installation:
1 Download zip
2 Boot into CWM
3 Wipe data, cache and dalvik cache
4 Choose zip from sd card
5 flash zip
6 reboot and let media scanner run and sit for a few and let it settlle and sync accounts.
7 Enjoy
To get video back flash stock kernel with sgs kernel flasher here:http://www.multiupload.com/PP69TXBEA5
UNPACK RAR AND FLASH ZIMAGE ONLY!
OKAY....I HAVE NOT PERSONALLY HAD THIS ISSUE, BUT TO BE SAFE, BEFORE FLASHING STOCK KERNEL , BOOT INTO CWM, SCROLL DOWN TO VOODOO AND DISABLE VOODOO LAGFIX. WHEN IT BOOTS YOU WILL HERE THE SEXY LADY DISABLING VOODOO. WHEN IT FULLY BOOTS BACK UP YOU SHOULD BE ABLE TO FLASH STOCK KERNEL WITHOUT ISSUES.
ONCE AGAIN, I AM NOT RESPONSIBLE IF YOUR PHONE SPONTANEOUSLY COMBUSTS...
Download Rom Here
Thanks going to try it out
Sent from my SGH-I997 using xda premium
Man you're fast. I just got the leak, didn't even have time to uncompress it.
Excellent. So if we flash the stock kernel and get video working again, what are we losing in the process? Sorry if this is a noobish question, I'm just now switching from galnet MIUI.
Shouldnt lose anything...and you will keep root also...
Sent from my SAMSUNG-SGH-I997 using xda premium
You gain video and hdmi back. You may have to make a slight change to one of the void files if you lose access to your CD card.
I see. Thank you for the help! I was told about this file before, but when I tried editing it last time I messed it up... don't you edit the last value to a different number or something? Do you know what number that is? Thank you guys for the help, I really do appreciate it, what with all these awesome leaks. :]
Truckerglenn said:
You gain video and hdmi back. You may have to make a slight change to one of the void files if you lose access to your CD card.
Click to expand...
Click to collapse
You will also lose your voodoo filesystem optimizations, init scripting support and the charginghacks/undervolt capabilities (if you like Entropy's kernel).
Well I enjoyed it for 5 minutes before going back to cm7 with thunder script but I still appericate the upload as something different always looking for my next rom fix.
Sent from my SGH-I997 using xda premium
You either change a 3 to a 2 or a 2 to a 1 forget which right now.
Go here for the correct fix for the SD Card: http://forum.xda-developers.com/showpost.php?p=19908483&postcount=24
Truckerglenn said:
You either change a 3 to a 2 or a 2 to a 1 forget which right now.
Click to expand...
Click to collapse
If you have flashed the stock kernel and want external SD: In vold.fstab, in the line that starts with dev_mount sdcard1, change from mmc2 to mmc1
I feel pretty dumb right now. I flashed the leak and then uses sgs kernel flasher to flash the stock kernel and my phone is now stuck at the Samsung splash screen upon reboot. I let it sit there for about 10 minutes. Now, I can't even get back to recovery mode. Could someone provide some advice?
Did u pull the zimage out of the rar fike? or did you flash the rar file?? i posted in op to unpack the zimage from the rar file...i know it works becaise i flashed the stock kernel and am runni.g it now....running great actually
Sent from my SAMSUNG-SGH-I997 using xda premium
devilock138 said:
I feel pretty dumb right now. I flashed the leak and then uses sgs kernel flasher to flash the stock kernel and my phone is now stuck at the Samsung splash screen upon reboot. I let it sit there for about 10 minutes. Now, I can't even get back to recovery mode. Could someone provide some advice?
Click to expand...
Click to collapse
Don't you have to convert you file system back before flashing the stock rom?
Yes, I unpacked the zimage file from the .rar and sgs kernel flasher rebooted the phone automatically after applying it.
---------- Post added at 09:09 PM ---------- Previous post was at 09:09 PM ----------
rxnelson said:
Don't you have to convert you file system back before flashing the stock rom?
Click to expand...
Click to collapse
I didn't realize that this used a different filesystem
No you dont...i didnt..runs great
Sent from my SAMSUNG-SGH-I997 using xda premium
devilock138 said:
I didn't realize that this used a different filesystem
Click to expand...
Click to collapse
Did you disable voodoo lagfix in recovery before flashing the stock kernel? Not doing that can cause issues, if I'm understanding this correctly.
You dont have to disable voodoo....all i did was flash thru sgs and it booted up fine...if you are stuck however then disabling voodoo might fix your problem
Sent from my SAMSUNG-SGH-I997 using xda premium
jscott30 said:
Did you disable voodoo lagfix in recovery before flashing the stock kernel? Not doing that can cause issues, if I'm understanding this correctly.
EDIT: Nevermind - I don't know what I'm talking about in this case. That's not it.
Click to expand...
Click to collapse
No, I don't believe I had any lagfixes.
I was running stock froyo with only root and cwm installed
I downloaded the .zip for the leak
booted into recovery and wiped data/cache/dalvik
flashed the leak
phone booted up fine
installed sgs kernel flasher from the market
extracted zimage file from the .rar in the op
used sgs kernel flasher to flash the kernel
phone rebooted and now stuck at samsung screen
I've pulled the battery and then tried to reenter recovery mode, but no dice
I am going to try unbrick through download mode and heimdal
Ok..well i didnt know you were coming from froyo...i dont know how flashing this from froyo would work since i cant even remember when i ran froyo last. I came from my catyrom....might need to be on gingerbread with gingerbread bootloaders ...
Sent from my SAMSUNG-SGH-I997 using xda premium