Xbox 360 Wireless Controller over Gtab - G Tablet General

Hi guys, first sorry for my english, hope you can understand me.
my question is short.. how can i use an usb gamepad on our gtab?
first, i need to use an xbox360 wireless controller. i've tried a methot advised by jazzruby:
Open/Run Terminal Emulator (by Jack Palevich) and type the following:
$ su - become Superuser
# insmod /system/lib/modules/ff-memless.ko - install module
# insmod /system/lib/modules/xpad.ko - install module
# lsmod - check to see if modules are loaded
should like something like:
xpad 8315 0 - Live 0xbf084000
ff_memless 4200 1 xpad, Live 0xbf075000
Click to expand...
Click to collapse
my xbox360 controller work perfectly, exception for analogue sticks, but is detected "like keyboard", so many games won't work exception for emulators.
so my question is: can xbox360 controller be used like Android 3.2+, natively (analogue stick included)?
there is a way to use it with all games (for example: GTA, Fifa, Modern Combat..)?
thx for the answers!
PS. atm i use Flashback 10.3

Related

[Q] Xbox 360 controller android spinning camera

I have been trying to use my wireless xbox controller with my xoom, mainly for gta3. I have bought a usb wireless xbox adapter and can connect the controller to the xoom easily. The controls work as tested by the usb/bt joystick demo app, but ingame the camera keeps getting stuck looking down and spinning. I have tried this with 2 controllers, which both work fine with the xbox) and ics as well as honeycomb.
I can't seem to fine the cause or find anything on google about a fix. I have added a video below showing what happens as it's quite difficult to dxplain
has anyone else had this issue or can think of a cause? Could the usb adapter be buggy? Could an app correctly calibrate the camera axis?
I have the exact same issue.
I'm no expert nor do I have a controller but is there some sort of calibration so you can center the controller?
Used to have this problem back in the days of midi connectors as game ports.
Sent from my DROID3 using xda premium
jediman said:
I'm no expert nor do I have a controller but is there some sort of calibration so you can center the controller?
Used to have this problem back in the days of midi connectors as game ports.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Glad it's not just me, u using the same setup as me? I am not 100% sure my usb xbox adapter is genuine Microsoft but that shouldn't effect it?
Sorry was saying I don't have a controller setup. Just trying to give some friendly advice.
Sent from my DROID3 using xda premium
jediman said:
Sorry was saying I don't have a controller setup. Just trying to give some friendly advice.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Sorry,quoted wrong post.thanks for your help but there is no configuration for the controllers. There is an app called usb/bt joystick center but am not sure if it will help,as its a paid app
Xbox Wired
Hmm, The XBOX Wired Controller works like a charm. Perhaps there is a driver issue. I know that using a wireless controller with Windows causes problems sometimes
Well I dont think microsoft made black wireless adapters for PC. And on the tegra site it says wireless controllers arent supported. Though wired is.
Same issue here. But with the USB Joystick Center app this issue is gone. I think its an android kernal bug.
How did you setup your profile with the app? Could you upload the profile or detail it?
Sent from my Galaxy Nexus using Tapatalk
OK, after some more research and trial and error I seem to have fixed the issue. The only bad news is that you need to be root. Something I found on a post talking about the onlive controller made me try their solution.
Firstly you need to run dmesg and look for the line:
<6>[ 1489.104652] usb 2-1: New USB device found, idVendor=045e, idProduct=0291
Taken from http://forum.xda-developers.com/showthread.php?t=1418263:
Open up a terminal emulator and run the following (building the new filename from the idVendor and idProduct)
su
cd /system/usr/keylayout/
mount -o remount,rw /system
cp Vendor_045e_Product_028e.kl Vendor_045e_Product_0291.kl
Reboot for the change to take into effect and both gta3 and shadowgun worked brilliantly. I had to assign some controls from within the shadowgun game to my preference and I can't be happier. I am running teamEOS ics ROM but this should work for honeycomb.
codyrichards said:
Hmm, The XBOX Wired Controller works like a charm. Perhaps there is a driver issue. I know that using a wireless controller with Windows causes problems sometimes
Click to expand...
Click to collapse
Stealyourface said:
Well I dont think microsoft made black wireless adapters for PC. And on the tegra site it says wireless controllers arent supported. Though wired is.
Click to expand...
Click to collapse
I can confirm that this is happening on my wired controller. The wireless/wired is not the problem. For me, the problem seems to ONLY happen when I press one of the trigger buttons on the 360 controller. Sounds playable, right? Well apparently some of other buttons don't work, like the drive/brake button. I have no idea what those buttons are so I don't know which ones aren't working.
shmallow said:
I can confirm that this is happening on my wired controller. The wireless/wired is not the problem. For me, the problem seems to ONLY happen when I press one of the trigger buttons on the 360 controller. Sounds playable, right? Well apparently some of other buttons don't work, like the drive/brake button. I have no idea what those buttons are so I don't know which ones aren't working.
Click to expand...
Click to collapse
Are you root? Have you tried my solution above?
I'm not rooted so I didn't try your solution. I think my problem is that I lost the dongle USB connector on from the xbox controller. I replaced it with the dongle from a Rock Band drum set. When I connect the controller to my computer it plays fine and registers as an xbox controller, except when I connect it to the tablet it came up as a Harmonix music controller. Maybe its just the dongle. I'm going to look around to try and find my original.
EDIT: I just found my original dongle, and it still shows up as a music controller. I'm pretty sure I'm only getting this problem because I'm using a cheap gamestop controller instead of a real xbox controller.
wardy277 said:
OK, after some more research and trial and error I seem to have fixed the issue. The only bad news is that you need to be root. Something I found on a post talking about the onlive controller made me try their solution.
Firstly you need to run dmesg and look for the line:
<6>[ 1489.104652] usb 2-1: New USB device found, idVendor=045e, idProduct=0291
Taken from http://forum.xda-developers.com/showthread.php?t=1418263:
Open up a terminal emulator and run the following (building the new filename from the idVendor and idProduct)
su
cd /system/usr/keylayout/
mount -o remount,rw /system
cp Vendor_045e_Product_028e.kl Vendor_045e_Product_0291.kl
Reboot for the change to take into effect and both gta3 and shadowgun worked brilliantly. I had to assign some controls from within the shadowgun game to my preference and I can't be happier. I am running teamEOS ics ROM but this should work for honeycomb.
Click to expand...
Click to collapse
OOOOHHHH YES!! This is the solution!!! Only reading this REPLY I have found the solution for all my problems... i try to Explain:
I have a OnePlus One whit Boeflla Kernel........ this kernel have a native support for Wired Controller XBOX 360 and i have two GameStop Xbox compatible controller!
There is correctly detected and working whitout problems but during some games like driving games my car swerved a little to the left when the analog stick is still on center!
I have tryed to found a solution over google and i found this thread... and now i have found a solution:
- I have installed "Android Terminal Emulator"
- I have connect my OTG cable and my Xbox 360 GameStop GamePad
- Immediately i have open the terminal... run su to get the root previleges and execute dmesg for found the correct idproduct and idvendor of my Gamepad!
At this point i have used ES File Manager... and whit that i have make a copy of stock file "cp Vendor_045e_Product_028e.kl" and after i have renamed to my needs (Vendor_0e6f_Product_0301.kl in my case) !
I have restart my device......... and rerun the same driving games and not YEAH!!! When Analog stick its still on center the car continue to runs perfectly well to forward whitout any problems!!
Very great solution!!!
At this point my question it's:
If i change my OTG Cable... the IdVendor and ProductID it's been changed or not ?
I have two different GamePad (two identical gamestop because it's perfect to play on PC )... and if i want to connect my second gamepad i need again to found the idvendor/product or not ??
wardy277 said:
OK, after some more research and trial and error I seem to have fixed the issue. The only bad news is that you need to be root. Something I found on a post talking about the onlive controller made me try their solution.
Firstly you need to run dmesg and look for the line:
<6>[ 1489.104652] usb 2-1: New USB device found, idVendor=045e, idProduct=0291
Taken from http://forum.xda-developers.com/showthread.php?t=1418263:
Open up a terminal emulator and run the following (building the new filename from the idVendor and idProduct)
su
cd /system/usr/keylayout/
mount -o remount,rw /system
cp Vendor_045e_Product_028e.kl Vendor_045e_Product_0291.kl
Reboot for the change to take into effect and both gta3 and shadowgun worked brilliantly. I had to assign some controls from within the shadowgun game to my preference and I can't be happier. I am running teamEOS ics ROM but this should work for honeycomb.
Click to expand...
Click to collapse
oh man thanks!!! this is great! luckily i found your post thanks for this
btw i had the same problem with spinning camera etc on my tegra note 7. thanks to this i am able to play the games just perfectly. really big thanks dude. *pressed thanks button*
Hey I use a wired Xbox 360 controller and in mine craft it looks up and spins and in menus it scrolls up.
I have a MYGT Bluetooth controller which works fine with the game. However I get the same thing you were describing when I try using a Razer keyboard and GE mouse with a OTG adapter and USB hub. In Google I can type and move the cursor so I know the game is what's messing up. I tried playing Minecraft with external devices and it works fine with the Bluetooth controller, however when using the keyboard only the number keys, functions buttons, and arrow keys work with the game.
My only and easiest solution was to install Magisk and 1controller module, a pity it doesn't exist as APK, good luck in installing Magisk

dolphin emulator on android

Hello,
I have install dolphin alpha 0.13 in my android tablet (my tablet have 2 core and 1go of RAM), wii game run But I have a problem with game controller, I connect my ps3 game controller with usb on usb host of my tablet, I can config key but my controller don't work when I run a game.
Thanks (sorry for my bad english, I'm french)
sandy
not for now
Currently the dolphin emulator does not have the ability to map the wii controls only GameCube controls.
There is an application that allows you to connect your Wiimote to Android. I forget the exact name, but it is something along the lines of "Wii Control" or "Wii Controller". As long as you aren't above version 4.1.2 it should work, but I can't say for certain if it will work with the emulator.
Worth a shot, though.

splashtop + xpadder/controller, possible?

hello guys, I just installed splashtop in my eeepad. it looks wonderful, I was trying to stream pcsx2 (a ps2 emulator). there is a bit lag, but still acceptable. now I'm wondering whether there is any way to connect controller on the dock.
I'm using xpadder to bind my controller with keyboard keys so I don't need to change configuration everytime I installed a game in my pc. I also use x360ce, an emulator to emulate x360 controller for my steam games
it seems my ps2 usb controller is detected by the dock/tablet however I'm not sure what to do next. anyone can give me a hint?

How 2 player NES emulator?

Hi guys I'm trying to play two players on the Nvidia with one Bluetooth controller and one using the Nvidia controller I am using this in Nes.EMU Emulator The farthest I have got is the one player will control the one player person but the Bluetooth controller will control the second player and the first player is there something I'm missing on the set up for this I can understand why the Bluetooth controller is controlling first player to play console games from your couch but is there a way to get it to be it's own second player controller then I can enjoy games like my force thank you for any help or info on this maybe even a set up walk-through or maybe a different emulator I should be using thank you guys in advance for any help
Hi, i'm not to knowledgeable on bluetooth controllers on the Shield or other android devices (such as the nyko line of bluetooth controllers). But the only method (that I have experience with) is with sony's six-axis controller for the ps3. I have two ps3 controllers and rooted multiple of my android devices (Asus tf700 tablet, Nexus S, and Shield) and paired my PS3 controllers by a simple procedure to get both to work on my device (using an app called "Sixaxis Controller"). This is the only method that i have experience with that would let you play with 2 controllers on a 2 player game running on a emulator. Sorry if this isn't the answer you're looking for, but this is the only method i know that works for me.
Requirements:
- rooted device
- two ps3 controllers
- pc
- Sixaxis Controller app

PS4/Xbox/Switch Controller Emulator for Android

Does anyone know of an app that allows you to emulate a controller on Android phone? To clarify, i want to play a game on Android which uses a controller (PS4 / Xbox / Switch). But I don't have any of those controllers. I want to emulate the controller input on my phone using my laptop's keyboard / mouse (maybe map them to dpad and analog stick). Is there any way to do this? I would prefer solutions which does not require root, but I am open to all.
Thanks in advance.

Categories

Resources