Hi everybody, well, I was just flashed my galaxy scl i9003 whith the stoc rom posted in this forum (xxkpq), everything went fine...when the flash was finished, the phone start as normal, I tryed the wireless conections and everything works well... then I was installled the CWM and made the factory reset and wipes, turn on the phone and I tryed to turn on the wifi connection, in this moment apears error (say error under)....I don't know what else to do...It's drive me crazy...HELP PLEASE!!!!
I was actuallized to xxkph to xxkpm (I think here start the problem) and now to xxkpq.
Thanks since now for your help!!!
Just check the box again.
Sent from my GT-i5801 using XDA App
bscraze said:
Just check the box again.
Sent from my GT-i5801 using XDA App
Click to expand...
Click to collapse
And what I should check??? Sorry my ignorance... Thanks
gonzads said:
Hi everybody, well, I was just flashed my galaxy scl i9003 whith the stoc rom posted in this forum (xxkpq), everything went fine...when the flash was finished, the phone start as normal, I tryed the wireless conections and everything works well... then I was installled the CWM and made the factory reset and wipes, turn on the phone and I tryed to turn on the wifi connection, in this moment apears error (say error under)....I don't know what else to do...It's drive me crazy...HELP PLEASE!!!!
I was actuallized to xxkph to xxkpm (I think here start the problem) and now to xxkpq.
Thanks since now for your help!!!
Click to expand...
Click to collapse
kph to kpm then kpq shouldn't affect much, but if you want to be sure it's done right, start from the beginning at kpe, then kph, then kpq. then, which version of cwm and cfroot are you using?
supergaijin said:
kph to kpm then kpq shouldn't affect much, but if you want to be sure it's done right, start from the beginning at kpe, then kph, then kpq. then, which version of cwm and cfroot are you using?
Click to expand...
Click to collapse
Now, I don't have installed any CWM and CF-ROOT because the problem of wifi connectivity, but I used the CF-ROOT with extra posted in the forum, I used the CWM v5, I'm not remember well... At the moment I'm using the stock rom gingerbread 2.3.6...but I can't personalize my phone!!!
Thanx!!!
gonzads said:
And what I should check??? Sorry my ignorance... Thanks
Click to expand...
Click to collapse
Just tick the switch wifi on box under wifi settings
Sent from my GT-I9003 using XDA App
bscraze said:
Just tick the switch wifi on box under wifi settings
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
so you're thinking he didn't know how to operate the wifi, instead of having an error? brilliant
---------- Post added at 12:43 PM ---------- Previous post was at 12:41 PM ----------
gonzads said:
Now, I don't have installed any CWM and CF-ROOT because the problem of wifi connectivity, but I used the CF-ROOT with extra posted in the forum, I used the CWM v5, I'm not remember well... At the moment I'm using the stock rom gingerbread 2.3.6...but I can't personalize my phone!!!
Thanx!!!
Click to expand...
Click to collapse
follow my instructions, and reflash starting with kpe, then kph, then kpq. then you can do whatever other customizations you want, but the three fw I listed will get you a working kpq with (hopefully) no wifi errors. I've never had a wifi error or disconnect.
supergaijin said:
so you're thinking he didn't know how to operate the wifi, instead of having an error? brilliant
Click to expand...
Click to collapse
Hey dont need to be so sarcastic well then sorry if i misinterpreted the question-.-
Sent from my GT-i5801 using XDA App
supergaijin said:
so you're thinking he didn't know how to operate the wifi, instead of having an error? brilliant
---------- Post added at 12:43 PM ---------- Previous post was at 12:41 PM ----------
follow my instructions, and reflash starting with kpe, then kph, then kpq. then you can do whatever other customizations you want, but the three fw I listed will get you a working kpq with (hopefully) no wifi errors. I've never had a wifi error or disconnect.
Click to expand...
Click to collapse
I did that the last time I was flashed, everything went well...but, now, if I try to install any CWM or CF-ROOT appears that error....I'm not ussing nothing...only the stock rom and the wifi works very good, the problem appears when I try to install whith the Odin... I try several times flashing like you recomend, and re-install CWM or CF-ROOT whith the same result.
Tanx!!!
bscraze said:
Hey dont need to be so sarcastic well then sorry if i misinterpreted the question-.-
Sent from my GT-i5801 using XDA App
Click to expand...
Click to collapse
ah, now it's clear, but I think I saved you from his scathing attack for that suggestion
if I had asked him, I'd try to stay away from things like that by asking instead "so you see your wifi is enabled but has an error? did you try toggling it off and on again? what happens when you reset?" so I don't appear to be calling him a total n00b for having that issue
---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------
gonzads said:
I did that the last time I was flashed, everything went well...but, now, if I try to install any CWM or CF-ROOT appears that error....I'm not ussing nothing...only the stock rom and the wifi works very good, the problem appears when I try to install whith the Odin... I try several times flashing like you recomend, and re-install CWM or CF-ROOT whith the same result.
Tanx!!!
Click to expand...
Click to collapse
1) just to be clear, when you "restart" by flashing kpe, you're starting with the pit file, then all of kpe ONCE, then kph ONCE and kpq ONCE?
2) so you're saying everything's ok until you flash cf root + EXTRA?
3) what happens if you flash without extra? and are you getting some error when flashing extra?
4) are you also flashing any modded kernel but not mentioning it?
5) what happens when you install the cfroot designed specifically for kpq? I see ganesh updated the kpq cfroot today. try the older one from 11/17 first before the newer one. if the first one works, make a backup and start experimenting with the others
Download wifi static from market...it workrdlled for me
Sent from my GT-I9003 using xda premium
jasspreet said:
Download wifi static from market...it workrdlled for me
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
supergaijin said:
ah, now it's clear, but I think I saved you from his scathing attack for that suggestion
if I had asked him, I'd try to stay away from things like that by asking instead "so you see your wifi is enabled but has an error? did you try toggling it off and on again? what happens when you reset?" so I don't appear to be calling him a total n00b for having that issue
---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------
1) just to be clear, when you "restart" by flashing kpe, you're starting with the pit file, then all of kpe ONCE, then kph ONCE and kpq ONCE?
2) so you're saying everything's ok until you flash cf root + EXTRA?
3) what happens if you flash without extra? and are you getting some error when flashing extra?
4) are you also flashing any modded kernel but not mentioning it?
5) what happens when you install the cfroot designed specifically for kpq? I see ganesh updated the kpq cfroot today. try the older one from 11/17 first before the newer one. if the first one works, make a backup and start experimenting with the others
Click to expand...
Click to collapse
1- I did like you sayd, 1st. Latona, then all the kpe, after thath, kph; kpm and last the kpq...
after thath when the phone start I made a proof about the wireless conections and the wifi works very good...then I put the phone in download mode and tryed to install the cwm v5.026 (I'm not really sure) and here start the problem... Anything I was tryed to install after flashing (cwm, cf-root, or kernel overclock) made the problem whith the wifi error.
Please tell me if I made something wrong in the flashing process.
Thanx!!!
gonzads said:
1- I did like you sayd, 1st. Latona, then all the kpe, after thath, kph; kpm and last the kpq...
after thath when the phone start I made a proof about the wireless conections and the wifi works very good...then I put the phone in download mode and tryed to install the cwm v5.026 (I'm not really sure) and here start the problem... Anything I was tryed to install after flashing (cwm, cf-root, or kernel overclock) made the problem whith the wifi error.
Please tell me if I made something wrong in the flashing process.
Thanx!!!
Click to expand...
Click to collapse
1) after installing cwm/cfroot with cwm, you have the option to wipe caches. since you've also done the pit file, your data should be lost as well, so there's no harm in going into recovery mode and doing a factory reset, then wipe cache,then advanced/wipe dalvik cache and see what happens then. it may be that just by installing cwm or whatever there is some data conflict but a full wipe should take care of that. after I flash, I never o without a reset and cache wipe.
2) you've had the same issue with both the universal and the one I linked that's specifically designed for kpq?
supergaijin said:
1) after installing cwm/cfroot with cwm, you have the option to wipe caches. since you've also done the pit file, your data should be lost as well, so there's no harm in going into recovery mode and doing a factory reset, then wipe cache,then advanced/wipe dalvik cache and see what happens then. it may be that just by installing cwm or whatever there is some data conflict but a full wipe should take care of that. after I flash, I never o without a reset and cache wipe.
2) you've had the same issue with both the universal and the one I linked that's specifically designed for kpq?
Click to expand...
Click to collapse
Well... first of all, tanx to supergaijin, I Installed the CF-ROOT for xxkpq and everything work very good, the wifi error it's gone...now I installed the cyanogen mode 7 thanks to the CWM, I'd made a lot of tests and evrytime I was tryed, the wifi connect to the home wireless network without issues!!!!
now I can personalize mi phone!!!
Tanx a lot everybody for your help!!!!
gonzads said:
Well... first of all, tanx to supergaijin, I Installed the CF-ROOT for xxkpq and everything work very good, the wifi error it's gone...now I installed the cyanogen mode 7 thanks to the CWM, I'd made a lot of tests and evrytime I was tryed, the wifi connect to the home wireless network without issues!!!!
now I can personalize mi phone!!!
Tanx a lot everybody for your help!!!!
Click to expand...
Click to collapse
glad to know you're all set now. enjoy playing around
Help :S
Please guys can u check my issue...i am finding no answers....and it is quite similar to this problem..Thanks!:good:
http://forum.xda-developers.com/showthread.php?t=1855063&page=2
Ok. Which kernek did u use for xxkpq ???
Mebin Robin said:
Ok. Which kernek did u use for xxkpq ???
Click to expand...
Click to collapse
Ty for attentio really i feel like no one knows a way to solve my problem :S....first of all if u read my post...i have XXLE4....but the problem comes out when i root the phone...i have tried with cf root for XXLE4 and also with the universal method....but alway on wifi i see "error" and cant connect never....:cyclops:
Bonaz93 said:
Ty for attentio really i feel like no one knows a way to solve my problem :S....first of all if u read my post...i have XXLE4....but the problem comes out when i root the phone...i have tried with cf root for XXLE4 and also with the universal method....but alway on wifi i see "error" and cant connect never....:cyclops:
Click to expand...
Click to collapse
just flash again with compatible xx... file with your phone. i had same problem and fixed
Related
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
password : samfirmware.com
enjoy
haree said:
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
enjoy
Click to expand...
Click to collapse
did you try this?
And yeah password : samfirmware.com
rudolf895 said:
did you try this?
And yeah password : samfirmware.com
Click to expand...
Click to collapse
no buddy i did not and yes pass word is as u had mentioned
haree said:
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
password : samfirmware.com
enjoy
Click to expand...
Click to collapse
Hey haree, I am from India. I still haven't flashed Froyo on my phone still using stock 2.1. I was thinking of flashing XXJPM. Should i go ahead with that or should i try the XWJPF??
android_murphy said:
Hey haree, I am from India. I still haven't flashed Froyo on my phone still using stock 2.1. I was thinking of flashing XXJPM. Should i go ahead with that or should i try the XWJPF??
Click to expand...
Click to collapse
hi
i think u have not done ur reading their is already an official update from samsung in india it is DDJP2 u can update via kies or go to the below link and take it from my drop box u can flash this via odin
Link : http://dl.dropbox.com/u/10031257/I5801DDJP2.rar
password : samfirmware.com (flash this via odin as a onepack)
haree said:
hi
i think u have not done ur reading their is already an official update from samsung in india it is DDJP2 u can update via kies or go to the below link and take it from my drop box u can flash this via odin
Link : http://dl.dropbox.com/u/10031257/I5801DDJP2.rar
password : samfirmware.com (flash this via odin as a onepack)
Click to expand...
Click to collapse
Oh i know that is available. But it's just that it has too many issues with it right now: Swype not working, FCs, Crackling sounds in audio, etc. So i wanted to flash a FW that is stable.
So i asked around a bit and found out that JPM is the most stable. But then i saw on samfirmware that they released XWJPF like 12 days back. And i haven't found anyone who has used it so far to get their input. So was just wondering which one to flash.
PS - never flashed a FW before, but been reading enough for the past two days to be comfortable enough to try it.
well i wud suggest u go for i5801 zhjpf......its the only rom which dont have the choppy call bug.
android_murphy said:
Oh i know that is available. But it's just that it has too many issues with it right now: Swype not working, FCs, Crackling sounds in audio, etc. So i wanted to flash a FW that is stable.
So i asked around a bit and found out that JPM is the most stable. But then i saw on samfirmware that they released XWJPF like 12 days back. And i haven't found anyone who has used it so far to get their input. So was just wondering which one to flash.
PS - never flashed a FW before, but been reading enough for the past two days to be comfortable enough to try it.
Click to expand...
Click to collapse
hi
i have used DDJP2 for a long time more than 2 weeks except for the swype not working(i dont use it so im OK) i have faced no problems at all as u have not flashed any rom till date id suggest u try flashing this vie kies and then decide what u want latter on
goodluck happy flashing
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
hi
i dont understand ur internet problem
but if u want to flash via odin read the link given below in detail before attempting anything via odin off ur virus scan while using odin and log in as admin while using odin
Link : http://forum.xda-developers.com/showthread.php?t=873645
yes their is the risk but i have flashed the same a few time in the last week
i had no problem but the risk is urs i dont know how to remove the boot & sbin sorry i cant help u their
and yes u will loose ur phone data so back up ur data before proceeding to flash the rom
goodluck
android_murphy said:
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
Click to expand...
Click to collapse
haree said:
hi
i dont understand ur internet problem
but if u want to flash via odin read the link given below in detail before attempting anything via odin off ur virus scan while using odin and log in as admin while using odin
Link : http://forum.xda-developers.com/showthread.php?t=873645
yes their is the risk but i have flashed the same a few time in the last week
i had no problem but the risk is urs i dont know how to remove the boot & sbin sorry i cant help u their
and yes u will loose ur phone data so back up ur data before proceeding to flash the rom
goodluck
Click to expand...
Click to collapse
did all of that... flashed using odin ... got a PASS ... wasn't booting for 50 mins (stuck at samsung glowing flash logo, so someone suggested rebooting and wipe cache/data ... but when i pressed power + home + volume up ... it showed a screen - "Forced Upload by Key Pressing" with an android logo next to it... nothing was happening so i booted again and now stuck at the GT-I5801 logo... Please help ... Please tell me my phone isn't bricked...
Don't worry but press vol up+ vol down + home + power
Get to recovery and wipe data and cache .
Sent from my GT-I5800 using Tapatalk
android_murphy said:
did all of that... flashed using odin ... got a PASS ... wasn't booting for 50 mins (stuck at samsung glowing flash logo, so someone suggested rebooting and wipe cache/data ... but when i pressed power + home + volume up ... it showed a screen - "Forced Upload by Key Pressing" with an android logo next to it... nothing was happening so i booted again and now stuck at the GT-I5801 logo... Please help ... Please tell me my phone isn't bricked...
Click to expand...
Click to collapse
hi
u have to be on DDJ6(ie original asia india 2.1) while flashing this or it wont work
assuming u are talking about DDJP2
I´ve flashed it yesterday and not perceived differences with JPM yet
android_murphy said:
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
Click to expand...
Click to collapse
just flash it man
the probablility of bricking is as low as burning yourself with a smoke
It didn't boot for me until I flashed JG6 eclair ROM first.
Can't see much difference to JPM.. except that It's missing finnish language. Has all of the slavic languages, though.
Pinak.ahuja said:
Don't worry but press vol up+ vol down + home + power
Get to recovery and wipe data and cache .
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "
with some other stuff also
android_murphy said:
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "
with some other stuff also
Click to expand...
Click to collapse
hi
we are really going off topic ill delete all the off topic once ur problem is solved
wipe data will not take more than a few mins the same screen will say wipe factory data finished or try pulling out ur batter putting it back(this worked for me once) in and then go to download mode and flash the original 2.1 again if successful then go back in to download mode and flash the 2.2
hope it helps
android_murphy said:
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "
with some other stuff also
Click to expand...
Click to collapse
That means It's stuck. Should take about ~2 mins at max.
Flash eclair JG6 first, and then this one. Password is samfirmware.com
thanx all for helping ... finally got irritated ... flashed JG6 and then JPM ... working sweet ... JP2 can rot in hell ...
Hello guys!
I got a Samsung GT-I5800 for few months but seems I have a big problem from some days actually.
I was using it when I suddenly lost the network coverage. Reboot, factory recovery, tried other carrier usims however it did not start to work again.
It doesn't work nor with automatic and manual network choice nor with enabled and disabled packed data whereas, if I try to send a message or make a call, an error popup appears saying "Data network not available".
I have never performed a root flash or something else so it is always been original factory.
here some info:
Firmware version 2.2
Baseband versions I5800XXJP4
Kernel version 2.6.32.9 [email protected] #1
Build number FROYO.XWJPI
I'm very glad if someone can help me to solve this awful problem given that the device is unusable
Try to add APN(search in the Internet for it) to your phone(Wireless and Network>Mobile networks>APN)
I already know what it is and it is configured (for my Internet plan)...
the real problem is that it cannot take the network signal anymore...there is a blue symbol like a circle with a line instead of normal signal bars
invano said:
I already know what it is and it is configured (for my Internet plan)...
the real problem is that it cannot take the network signal anymore...there is a blue symbol like a circle with a line instead of normal signal bars
Click to expand...
Click to collapse
did u try flashing any other rom?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus Rom v 2.1
powered by
G3mod by Arakmar 12/04/2012.zip
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As I said I did not...never
I had this problem till yesterday. Hate to say it but you probably have lost your IMEI.
Sent from my GT-I5800 using xda premium
friend863 said:
I had this problem till yesterday. Hate to say it but you probably have lost your IMEI.
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Oh my god. How ones can lost the IMEI?!!
Btw the IMEI on the phone is equal to one on the box.
....and now! If it is this the case, what about the solution?
invano said:
Oh my god. How ones can lost the IMEI?!!
Btw the IMEI on the phone is equal to one on the box.
....and now! If it is this the case, what about the solution?
Click to expand...
Click to collapse
Check your IMEI by *#06#. If it is all zeros then it is corrupted. If it's old one then it is fine
You can try disabling then enabling flight mode. Wiping data or dalvik cache. Good Luck!
PS: Backup your efs folder to PC using Root exlorer. It contains IMEI and must NOT be deleted. Just for safety advice!
friend863 said:
Check your IMEI by *#06#. If it is all zeros then it is corrupted. If it's old one then it is fine
You can try disabling then enabling flight mode. Wiping data or dalvik cache. Good Luck!
Click to expand...
Click to collapse
thank you so much for the support
anyway the imei was one of the first checks, it's the correct and old one.
what do you mean with wipe data and dalvik cache? isn't it the same of a factory restore? (factory restored lots of time but nothing happens)
Did you tried zerofill? You can easily find by searching this forum.
Also have you tried putting the SIM in other mobiles? Do they work?
BTW, I know that feel bro. I know the feel to live without calling/sms for few days
friend863 said:
Did you tried zerofill? You can easily find by searching this forum.
Also have you tried putting the SIM in other mobiles? Do they work?
BTW, I know that feel bro. I know the feel to live without calling/sms for few days
Click to expand...
Click to collapse
of course every SIMs work in other mobiles. It isn't a problem about how I feel and so on. It stopped to work and bye bye no more mobile phone just a paperweight...
I had a search about zerofill. is it useful to delete everything, right? I didn't get how flash it and re-flash the original firmware...by kies?
You'll need ODIN for that to flash the ROM. [Make sure you read instructions]
It will wipe all phone data so take backup from Titanium backup first.
friend863 said:
You'll need ODIN for that to flash the ROM. [Make sure you read instructions]
It will wipe all phone data so take backup from Titanium backup first.
Click to expand...
Click to collapse
It doesn't matter the phone is empty due to several factory restores in order to try to solve the situation
Ok, thank you guy, I'll try to search some instructions. I'll give a feedback here...hoping it s gonna be positive
p.s. I found a zerofill G3.tar on this forum. Is it good for my galaxy GT-I5800?
Yes, It wipes everything in phone memory. All the previous traces. It might solve your problem.
PS: Or Flash any other firmware. It always works.
friend863 said:
Yes, It wipes everything in phone memory. All the previous traces. It might solve your problem.
PS: Or Flash any other firmware. It always works.
Click to expand...
Click to collapse
last 2 questions
so, zerofill to erase EVERYthing and the I have to download my original ROM to flash it?
the zerofill tar contains 3 files .rfs: cache, datafs and factoryfs. Do i have to flash these by odin? sorry guy but i don't find any tutorial about odin and zerofill
It looks you have never flashed a ROM in ODIN. In that case I would say forget zerofill and just flash a firmware you want. Because you'll need to flash a ROM after flashing zerofill too. I recommend Custom ROM as it is fast and more features, it will void your warranty though. But you can always flash stock ROM to get your warranty back.
If you want to go Stock, then you can find stock ROM at samfirmware.com. Download anyone from there. Post here when you finish downloading. I'll post the instructions.
friend863 said:
It looks you have never flashed a ROM in ODIN. In that case I would say forget zerofill and just flash a firmware you want. Because you'll need to flash a ROM after flashing zerofill too. I recommend Custom ROM as it is fast and more features, it will void your warranty though. But you can always flash stock ROM to get your warranty back.
If you want to go Stock, then you can find stock ROM at samfirmware.com. Download anyone from there. Post here when you finish downloading. I'll post the instructions.
Click to expand...
Click to collapse
yes, you got the point never flashed an android firmware...
ok, odin downloaded and a stock firmware by samfirmware too
Read here http://forum.xda-developers.com/showthread.php?t=778880
You'll also need apollo.ops
friend863 said:
Read here http://forum.xda-developers.com/showthread.php?t=778880
You'll also need apollo.ops
Click to expand...
Click to collapse
yeah found that just before. as soon as i flash and i have some news (hope good ones) i'll post here.
thank you again
done...it's the same...
https://www.dropbox.com/s/1xuzc87ev0zhf6w/Photo 22-04-12 13 55 09.jpg
I don't know what i can try now...
i tried everything [odin (using the cf-roots provided in tht other thread), androot, unlockroot and superonetouch]but i just cant get my phone rooted........
i have a samsung galaxy gt-i9003
firmware version - 2.3.6
baseband version - I9003DDKP4
kernel version - 2.6.35.7-CL882023 [email protected]#1
build number - GINGERBREAD.DDKP3
odin just gets stuck at "setup connection", for abt 2 hours (thts not supposed to happen i guess), so plz help me.
other apps just give the message "cant root your device"
Happened to me too...just change your usb cable...if not change usb port..it happens due improper connection n is hardware related..
Press thanks if that helpd
Sent from my GT-I9003 using XDA
loneagl said:
Happened to me too...just change your usb cable...if not change usb port..it happens due improper connection n is hardware related..
Press thanks if that helpd
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
didnt work. i used 2 other cables, and another laptop. still stuck at "setup connection"
Try xxkpe.with pit file.it worked for me
Sent from my GT-I9003 using XDA
loneagl said:
Try xxkpe.with pit file.it worked for me
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
plz elaborate....... (m a noob)
i know whats the problem your not flashing while in download mode. turn off your phone hold volume down then power then menu until download mode appeara. then connect to odin.
Sent from my GT-I9003 using XDA
---------- Post added at 06:20 PM ---------- Previous post was at 06:08 PM ----------
First install KIES, then odin. After that download bagaria.tar here
http://forum.xda-developers.com/showthread.php?t=1351056
go to download mode as i said above, connect to pc then open ODIN. Make sure the color of the box is YELLOW and there is Word "Added" in the log screen. Click PDA, then browse bagaria.tar. HOLLAAA.. )
marshygeek said:
i know whats the problem your not flashing while in download mode. turn off your phone hold volume down then power then menu until download mode appeara. then connect to odin.
Sent from my GT-I9003 using XDA
---------- Post added at 06:20 PM ---------- Previous post was at 06:08 PM ----------
First install KIES, then odin. After that download bagaria.tar here
http://forum.xda-developers.com/showthread.php?t=1351056
go to download mode as i said above, connect to pc then open ODIN. Make sure the color of the box is YELLOW and there is Word "Added" in the log screen. Click PDA, then browse bagaria.tar. HOLLAAA.. )
Click to expand...
Click to collapse
i am doing it in download mode. i m doin eveything as described in various other threads, but its still not working.........
Go to settings> application, development then check usb debugging mode then try again.
aritro88 said:
i tried everything [odin (using the cf-roots provided in tht other thread), androot, unlockroot and superonetouch]but i just cant get my phone rooted........
i have a samsung galaxy gt-i9003
firmware version - 2.3.6
baseband version - I9003DDKP4
kernel version - 2.6.35.7-CL882023 [email protected]#1
build number - GINGERBREAD.DDKP3
odin just gets stuck at "setup connection", for abt 2 hours (thts not supposed to happen i guess), so plz help me.
other apps just give the message "cant root your device"
Click to expand...
Click to collapse
I suggest you first flash your phone using Odin to XXKPE firmware. Then flash to XXKPQ/KPU (more stable). Download the root file for the installed firmware. You should be ok
Stock ROMs available here,
http://forum.xda-developers.com/showthread.php?t=1004647
rshankar said:
I suggest you first flash your phone using Odin to XXKPE firmware. Then flash to XXKPQ/KPU (more stable). Download the root file for the installed firmware. You should be ok
Stock ROMs available here,
http://forum.xda-developers.com/showthread.php?t=1004647
Click to expand...
Click to collapse
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
marshygeek said:
Go to settings> application, development then check usb debugging mode then try again.
Click to expand...
Click to collapse
its obvious tht i hav done this. but it still dosent work
aritro88 said:
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
Click to expand...
Click to collapse
Can you elaborate on what these bugs are? I'm using XXKPQ and I'm not facing any problems..
Sent from my i9003 with CM9
aritro88 said:
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
Click to expand...
Click to collapse
No, thats not true. The only ones with bugs are the older roms. XXKPE is old but it's very stable with no bugs. Where did you hear that "XX series" roms are experimental? The "XX" or "DD" letters only indicate the region of the release. In this case "XX" roms are for europe while "DD" roms are for around India and some parts of Asia. However, you can still use roms like XXKPQ and XXKPU world-wide.
For your Rooting problem
Have you tried SuperOneClick? If not, just download the latest version and install. Then make sure debugging mode is ticked on your phone, open superoneclick and connect your phone. Just click Root and wait for phone to restart.
If you've already tried SuperOneClick, Then your best option is to install XXKPE with .pit file. Just follow the steps on this site and upgrade to DDKP3 or XXKPU, then try rooting your phone.
http://www.theinfomania.com/2012/04/28/how-to-upgrade-your-samsung-galaxy-sl-i9003-with-stock-roms-ddkp3-or-xxkpu/
Hope this helps, Cheers
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
aritro88 said:
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
Click to expand...
Click to collapse
Does the COM box turn yellow?
Sent from my GT-I9003 using XDA
remove your sd card while rooting.
Sent from my GT-I9003 using XDA
First thing you must install Samsung kies in you laptop and then install odin
Sent from my GT-I9003 using xda premium
Hi
Not sure if you're issue is fixed so I'll give my 2 cents.
Try cleaning the information of your USB devices using Drive Cleanup [use google ] assuming you have a Windows PC.
Then install latest Kies for latest USB drivers or if your PC is set to get drivers directly from the internet then updated drivers will be installed automatically once you attach your phone.
Hope this helps
aritro88 said:
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
Click to expand...
Click to collapse
your phone still can on?
SOLVED
after soooooooo many days, my phone is finally rooted.
a friend intalled an XX series ROM and then rooted it, it worked fine. BUT the voice quality is dead now, its full of noise
guess ther's a package deal with everything these days
Guys --> M not a developer nor m too much into tech things..
I was reading alot about rooting phone & getting good (ICS) rom on my device (samsung i9003).
I have superoneclick with USB debugging on--> it stuck at step 7 & application freezes.
I have ODIN wid me....(dont knw what TAR..people are talking)...
I will be grateful if some one can help me...(stepwise direction will be a great help)..
Thanks
i used odin to try and root my phone...now all i get is the screen where you touch the andriod to begin and it keeps saying...the application google services framework(process com.google.process.gapps)has stopped unexpectedly.please try again..force close...someone please help..im lost..and i can find nothing on this..
Deleted
johnb380 said:
Deleted
Click to expand...
Click to collapse
Your not a moderator in the first place so you can't just say deleted.
Sent from my SGH-T769 using xda premium
---------- Post added at 06:27 AM ---------- Previous post was at 06:25 AM ----------
Did you try rebooting the phone? If the problem still consists try factory resetting to stock and the root it again.
Sent from my SGH-T769 using xda premium
im_awesome_right? said:
Your not a moderator in the first place so you can't just say deleted.
Sent from my SGH-T769 using xda premium
---------- Post added at 06:27 AM ---------- Previous post was at 06:25 AM ----------
Did you try rebooting the phone? If the problem still consists try factory resetting to stock and the root it again.
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
Don't got to be a moderator to delete my own post... Lol
I had responded but deleted it it hence the "DELETED" IN MY POST
- - - - - - I'm not a Dev, I just flash ALOT!- - - - - - - - - If I've helped you the THANX button is - - - - - - - - - - - - - - only 2 clicks away! - - - - - - - - - -
nmadrid said:
i used odin to try and root my phone...now all i get is the screen where you touch the andriod to begin and it keeps saying...the application google services framework(process com.google.process.gapps)has stopped unexpectedly.please try again..force close...someone please help..im lost..and i can find nothing on this..
Click to expand...
Click to collapse
What gapps did you use? Sounds like a compatibility issue. Use the one from the Blaze Bible. After you flash the zip, factory reset. That should solve your problem. Still stuck? Boot cwm fix permissions, reboot. Last resort, start over from scratch and read very carefully each step....
If it helped hit thx
Same thing
I am having the same issue. It was after I installed cwm. the next step was to reboot into recovery mode, but I can't find anywhere that tells me to do it manually. I have also tried via ADB w/o success. I have tried various USB drivers in download mode and regular mode.
Any idea how to get into cwm and push .zips via USB from this state? Or, if I could install gapps from Odin, but I can't find a .tar for gapps.
heftykins said:
I am having the same issue. It was after I installed cwm. the next step was to reboot into recovery mode, but I can't find anywhere that tells me to do it manually. I have also tried via ADB w/o success. I have tried various USB drivers in download mode and regular mode.
Any idea how to get into cwm and push .zips via USB from this state? Or, if I could install gapps from Odin, but I can't find a .tar for gapps.
Click to expand...
Click to collapse
Must be rooted for this method.
Download terminal emulator from play store. Open and type su press enter. Then type reboot recovery and press enter.
Sent from my SGH-T769 using xda app-developers app
xWolf13 said:
Your not a moderator in the first place so you can't just say deleted.
Sent from my SGH-T769 using xda premium
---------- Post added at 06:27 AM ---------- Previous post was at 06:25 AM ----------
Did you try rebooting the phone? If the problem still consists try factory resetting to stock and the root it again.
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
Off topic.. I remember when I was all noobish hahaha. This post makes me looks stupid lol..
Wipe data/factory reset. from the stock recovery only works if you're on ics.
have you tried installing/ reinstalling the right gaaps?
Just clear cache and Dalvik.
Worst Case Scenario!
Hm, if none of the above comments help you try this:
Flash back to Official Stock GB using this thread.
(I know this thread has NOTHING to do with your problem, but it has a link to Stock GB AND a guide on how to flash it.)
After you flashed that, root your phone using this thread
Be careful and READ EVERYTHING before following either of those two threads, you could potentially end up destroying your device, if you do you'll have no one to yell at but yourself!
same problem here. haven't successfully fixed my friend's device. HELP!!
FroBreadCreamJellyPie said:
Hm, if none of the above comments help you try this:
Flash back to Official Stock GB using this thread.
(I know this thread has NOTHING to do with your problem, but it has a link to Stock GB AND a guide on how to flash it.)
After you flashed that, root your phone using this thread
Be careful and READ EVERYTHING before following either of those two threads, you could potentially end up destroying your device, if you do you'll have no one to yell at but yourself!
Click to expand...
Click to collapse
google services stopping unexpectedly after flashing - HELP SOS
Quote:
Originally Posted by AndyAZ1000 View Post
after i did this, it keeps saying
screen "Welcome to SGH-T769, TOUCH THE ANDROID TO BEGIN" but whenever i touch the android, it gives me and error "GOOGLE SERVICES FRAMEWORK HAS STOPPED UNEXPECTEDLY"
is this suppose to happen?
HELP!
I am having the same problem here. I was trying to root my friend's phone using the link with the odin and then install the newest CM (which btw is JUST AWESOME). On download mode, I'm seeing like 10 counts and custom binary. I also tried odin with this T769UVLB7_T769TMBLB7_TMB that I found in another post.
I erased everything in the 1.4 gb rom, I've tried it all for hours. I saw this post and somebody else with the same problem but it looks like they couldn't solve it. I don't think it's a driver issue because the roms get flashed but the problems occur on the welcome start page. Then all the processes and services start stopping unexpectedly and I can't go any further. please somebody help!!!
Also installed Samsung Kies to see if it could change the firmware or fix it or anything. That's what I used to erase everything on the ROM (because I thought that could be the issue). But no, kies says my firmware can't be recognized or sth like that.
I have flashed on my own blaze thousands of ROMS form xda, but this is the first time I see something like this.
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
Quote:
Originally Posted by jparnell8839 View Post
wipe data/erase cache. sometimes, things go borky. thing is, if you followed the guide to a T, you should be 100% stock, but you've got things going wrong. if that doesnt work, reflash with odin again
How do I wipe and erase that on odin mode??
I'm having the same issues and no success. Guys, I will definitely appreciate this one. Please HELP!!
Hey there, I recently Updated my C2105 to 15.3.A.1.14 from 15.3.A.0.26 (Using flashtool, No problem occured.).Then I unlocked my bootloader for the first time without any bootloop occuring .After BLU-ing I rooted my phone . Again no problem at all. Then I installed Phantom Kernel 4.5 for the first time (Seems nice ).
But here is the problem i have. The Wi-Fi switch won't stay turned on and of course I have no connection. My bluetooth works fine though. I searched on the forums and i Find out that i need a module??? to make it work...
This is the part that I'm completely lost. I dont get what to Install :/ . Please help me ! c:
Again whats up on my phone At The Moment
Firmware : 15.3.A.1.14
Kernel : Phantom Kernel 4.5
Bootloader : Unlocked
Root status : Rooted
Thanks in advance
XperiaNoobie said:
Hey there, I recently Updated my C2105 to 15.3.A.1.14 from 15.3.A.0.26 (Using flashtool, No problem occured.).Then I unlocked my bootloader for the first time without any bootloop occuring .After BLU-ing I rooted my phone . Again no problem at all. Then I installed Phantom Kernel 4.5 for the first time (Seems nice ).
But here is the problem i have. The Wi-Fi switch won't stay turned on and of course I have no connection. My bluetooth works fine though. I searched on the forums and i Find out that i need a module??? to make it work...
This is the part that I'm completely lost. I dont get what to Install :/ . Please help me ! c:
Click to expand...
Click to collapse
I noticed the same issues, but also with Civic and Thunderzap 3.1. the Phantom modules don't change anything. up until now, i am with stock kernel, maybe the kernel developers will fix that. also, i've tried the Cybershot camera, but it is not installing.
csocaciu said:
I noticed the same issues, but also with Civic and Thunderzap 3.1. the Phantom modules don't change anything. up until now, i am with stock kernel, maybe the kernel developers will fix that. also, i've tried the Cybershot camera, but it is not installing.
Click to expand...
Click to collapse
Hey no worries a friend of mine faizalotai in name helped me out here. Its easy ... Just before install the kernel in cwm wipe the dalvik cache through the advanced menu then go back and install your kernel .Easy peasy..
Here is his profile http://forum.xda-developers.com/member.php?u=5412433 if yuo need anything else you can ask him
XperiaNoobie said:
Hey there, I recently Updated my C2105 to 15.3.A.1.14 from 15.3.A.0.26 (Using flashtool, No problem occured.).Then I unlocked my bootloader for the first time without any bootloop occuring .After BLU-ing I rooted my phone . Again no problem at all. Then I installed Phantom Kernel 4.5 for the first time (Seems nice ).
But here is the problem i have. The Wi-Fi switch won't stay turned on and of course I have no connection. My bluetooth works fine though. I searched on the forums and i Find out that i need a module??? to make it work...
This is the part that I'm completely lost. I dont get what to Install :/ . Please help me ! c:
Again whats up on my phone At The Moment
Firmware : 15.3.A.1.14
Kernel : Phantom Kernel 4.5
Bootloader : Unlocked
Root status : Rooted
Thanks in advance
Click to expand...
Click to collapse
If you first time install Phantom Kernel, you need to extract the boot.img from the zip file provide, flash through FLASHTOOL and after this, enter CWM, flash the same zip file with all the files for flashing the kernel modules.
Reboot and you're done !
try flashing stock kernel or another custom kernel....or u must flash Phantom kernel twice.....first through flashtool then through recovery...
DsvCdsSoftware said:
If you first time install Phantom Kernel, you need to extract the boot.img from the zip file provide, flash through FLASHTOOL and after this, enter CWM, flash the same zip file with all the files for flashing the kernel modules.
Reboot and you're done !
Click to expand...
Click to collapse
nope, wifi still doesn't work. i guess something changed in .14 and the kernels didn't keep up with that yet. no worriesfor me, i'll wait. good thing there's nandroid
---------- Post added at 01:19 PM ---------- Previous post was at 01:08 PM ----------
XperiaNoobie said:
Hey no worries a friend of mine faizalotai in name helped me out here. Its easy ... Just before install the kernel in cwm wipe the dalvik cache through the advanced menu then go back and install your kernel .Easy peasy..
Here is his profile http://forum.xda-developers.com/member.php?u=5412433 if yuo need anything else you can ask him
Click to expand...
Click to collapse
evharisto... awsome tip. this really worked like magic. :good:
csocaciu said:
nope, wifi still doesn't work. i guess something changed in .14 and the kernels didn't keep up with that yet. no worriesfor me, i'll wait. good thing there's nandroid
---------- Post added at 01:19 PM ---------- Previous post was at 01:08 PM ----------
evharisto... awsome tip. this really worked like magic. :good:
Click to expand...
Click to collapse
Hey no worries. Enjoy
csocaciu said:
nope, wifi still doesn't work. i guess something changed in .14 and the kernels didn't keep up with that yet. no worriesfor me, i'll wait. good thing there's nandroid
Click to expand...
Click to collapse
Strange, but if the second tip worked, happy new kernel :laugh: