Hello,
I have a big problem and I hope you can help me.
A few weeks ago I want to update my Treo to WM6.5 and use a Rom (I think from navenedrob) which was timebombed (since there I don't know it).
Now I want to update my Treo to the right version from this thead :
http://forum.xda-developers.com/showthread.php?t=541417
but when I start the update with the cheathunlocker tool, it stops at 7%, the usb connection get lost and my Treo make a restart and the old bimebomed version is there...and the tool says, that the file is curuppted and i should check my update tool... but this message comes every time also with other roms.. When I use the method with the media button there comes the colored screen with "serial" and nothing happens.
(The sd card is okay and the same card which I use to install the timebombed version)
What should I do? I can't do anything... Please help me
1. format the card 32fat.
2. do not use hc card.
3. try to download again the rom.
4. if it does not help - try to install 6.0 rom from palm .
Hello
1. format the card 32fat.
2. do not use hc card.
3. try to download again the rom.
I tried this very often... But nothing helps
Where I can get this Rom? On the plam homepage I can't find a Rom, only instructions and a download for Mobile center.
http://rapidshare.com/files/173145556/Treo750_2.23_ROW_WM6.rar
For England (750V) :
http://www.megaupload.com/?d=PS2QHTE6
Oh really thank you for the Roms!
But I have a problem, my Treo dosn't connect to my Pc. When I click to my workplace there isn't a hhd from the Treo.. and the Mobile Center show me, that there i no connection... I have Windows 7, under Windows Vista it don't work too...
Because of that I can't update my Treo.
Do you know the problem and how to solve it?
Really big thank you, this here is a nice community where I get help!!
1. try to install from WINXP - look for another computer...
2. there is a way to get the rom from the file - maybe with winrar- I'm not sure but I remember something like it...
3. look for a rom 6.1 and try to install it from the card.
Okay I try it under Windows Xp, but I get no connection
I get the Rom from the .exe file by 7zip and copy it to the sd card, but the same problem is there at 7%
Do you have maybe am link from Wm6.1?
I think all this dosn't work.. I don't know what the problem is..
What other possibility can I try? There must be a solution for it...
a link to 6.1
http://www.mediafire.com/?4gxsdxh1tmm
maybe you need to replace your card...
Okay thank you.
I try it with an other card and hope it works..
But I think, that this don't work, because when I press the media button und reset, there comes the bootloader with "serial" on the bottom of the display and when I connect it to my pc "usb".. but I can't start the rom with this method...
I try it tomorrow and tell you if it works or not
the "serial" problem happened to me too. It was because bad rom file or bad card.
Okay today I try it with an other Card and 2 Roms (also the orginal Rom), but in the bootloader modus there is every time the "serial" and below..
Palm Tr
IPL-0.20
PalmTr
SPL-0.24.0000
Serial
And when I try it with the cheetahunlocker, it stops at 7% and my Treo make a restart and the old timebombed version is loading..
But maybe my sd card slot is broken from my Treo or the sd card adapter...
because when I run the cheetahunlocker without an sd card, it also stops at 7%...
any idea to check this? Or an other way?
Hey I might have a solution here:
When you format the Mini SD card, do NOT do a quick format. Uncheck that box and do a full format, FAT32, Default Allocation Size.
This took over 15 minutes for me.
Do a scandisk (Right click the drive/tools/scandisk) and check "Fix Errors". This should ensure your SD card is in good shape.
Now copy a good ROM to the card and reset+PTT. The Palm should flash successfully now. If not your ROM may be corrupted.
Hope this helps! It worked for me!
1. Format sd card to fat32
2. find the .nbh file in the stock ROMS
3. rename it CHEEIMG.nbh
4. copy it to the sd (make sure it is not hcsd or it won't work)
5. insert the card in the card reader
6. reset the phone by using the stylus and the reset button next to the card reader, at the same time hold the PTT button on the left side of the phone, (this will put it bootloader mode)
7. when prompted, press the end talk button on the phone, this should start the update process without using activesync.
HardSpl
1. redownload the app and extract using 7zip
2. make sure you have .NET compact framework 3.5 installed on the PC and the phone
3. in CHEETAH unlocker press ctrl+2 and click the header (this will unlock all three options)
4. follow steps
The radio it flashes will not be a good one, so you need to search around to get the right one. Once those steps are complete, you should be able to reflash WM 6.5 without any problems. If you download Navendrob's ROM, you will need to download the arcsoft mms composer to make mms work, and you should be good to go.
Hi backspacepc,
thank you for your help!!!Now it works.. I didn't rename the file. so this was the problem
Hi,
I have a question about this rom. (Wm6.5 from naevendrob)
My touch is broken, so I can't use the touch. Now I have the problem, that I only end a call with touching "end" and not with the normal hang up button on my keybord.
My second problem is, that I can't lock my Treo, because when I want to unlock it, I have to use the touch display.. On Wm 6.1 I could turn my screen with the hang key on my keyboard off.. this is now on this Rom not possible, or do anybody have a solution for this? Maybe in the registry or something?
Thank you
Has nobody a anser?
Speedkazze said:
Has nobody a anser?
Click to expand...
Click to collapse
Since your issue is with the ROM you loaded & your hardware problem, you should bring it up at the specific thread where you downloaded the ROM from.
I would recommend getting the touch screen fixed or roll back to WM6.0.
No it's a Problem with my Treo. I change the touchscreen one time and it works for a while, but after maybe 2 months the touch dosn't work.
Can anybody maybe write a file that i can use the hang up button to hang up without the touchscreen?Or has anyone an idea to change it maybe in the registy or sth. like that?
Speedkazze said:
Okay thank you.
I try it with an other card and hope it works..
But I think, that this don't work, because when I press the media button und reset, there comes the bootloader with "serial" on the bottom of the display and when I connect it to my pc "usb".. but I can't start the rom with this method...
I try it tomorrow and tell you if it works or not
Click to expand...
Click to collapse
Yes I have the same problem, i try with two micro SD card 2 and 1GB formatted to FAT32,and i didnt use quick format, and the cards aren´t HC. but is not working, I supose isnt the card, something is missing,
Please, Can Somebody Help us????
thanks a lot
______________
gracias de antemano
juancamaney69 said:
Yes I have the same problem, i try with two micro SD card 2 and 1GB formatted to FAT32,and i didnt use quick format, and the cards aren´t HC. but is not working, I supose isnt the card, something is missing,
Please, Can Somebody Help us????
thanks a lot
______________
gracias de antemano
Click to expand...
Click to collapse
HardSPL the phone first, then it should work.
I found a way to get cabs to install via ctiveSync/Windows Mobile Device Center. Previously I have came to a problem that it does not run as administrator. With a combination of CABviaAciveSync and Always Run as Administrator I have solved this problem.
To get the latest of each go here:
CABviaActiveSync
Always Run as Administrator
Use ARAA to make "CABviaActiveSync.exe" ARAA and then you should be able to install via ActiveSync/Windows Mobile Device Center!
As a side note I'd like to mention that if you use this plus AppToDate will make it even easier. After a hard reset (can't figure out how to cook my own rom... yet) all I have to do is install my old version of the app then AppToDate updates them all!
Very nice. I have found it's just as easy to load any cab file onto the micro SD card, and run the cab file from the SD card on the phone...
Scott
poriggity said:
Very nice. I have found it's just as easy to load any cab file onto the micro SD card, and run the cab file from the SD card on the phone...
Scott
Click to expand...
Click to collapse
Thats what I have been doing but after many flashes its gets a tad annoying. I'm also aware of programs that will install a complete folder of cabs but I just prefer using the computer. I do keep all the cabs on my SD too just in case i have to Hard-Reset on the go.
will this work on windows 7 x32?
using htc hd2 phone
I'm really, really sorry if i posted this in the wrong section or what else.
I'm having problems using the Gen.Y dualboot system on my kaiser, I installed the CAB for the HTC Kaiser.
It works... but only when opening the bootmanager when Windows Mobile 6.1 is already booted, there is no way to first load the bootmenu from Gen.Y and then choose to boot Windows Mobile or Android.
The Android is installed correctly and the registry is set well to boot from the Andboot map on my SD card so there's no problem booting android.
It's just that the bootmanager doesn't startup when turning on the phone.
(I'm running Eclair 2.1g Polymod Light-Themed)
I hope someone can be of help and i really appreciate whoever even thinks of answering a possible solution.
Syntax1993
Hello guys,
as many of us, I cant recognise my HDD under windows to be able to sync Lotus with the phone directly.
I tried everything, but it seems nothing working....
using HTC sync (both the last version and the version I had on the phone SD card), it says that the driver installation has failed...
I tried also to edit the android-winusb.inf adding lines, but even this doesn't work...
I can see my phone as USB drive....but not in sync mode...
Any other suggestions????
Is it possible that there is no a single file that can solve it???
Thanks mates!
Marco
Sorry....
up....
Sorry, but I do want to solve this issue!
Solved!!!
Hello guys,
I've solved the issue by myself....just modifying the .inf file that comes with sdk.
Attached the solution which worked for me....on my Desire HD (IT MIGHT WORK ALSO FOR THE DESIRE)!!
Hope can help comebodyelse!!!
Cheers
Marco
PS:....just update the ADB driver from the my computer/right click/ properties/hardware/device manager
Hi there,
I recently installed FRX07.1 Android for my HTC Blackstone.
All is working well, but I have a problem using GEN.Y Dualboot to autoboot android.
I am using the following things:
Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card: http://forum.xda-developers.com/showthread.php?t=623792
**Complete FroYo Bundle** FRX07.1 - Maintenance Release - http://forum.xda-developers.com/showthread.php?t=1167324
Gen.Y Dualboot DOES detect android, but I get an error saying: "An error occurred on sub__main_bootandroid. Win32Exception Continue?"
I have my android on an SD card in a subfolder called andboot and I have editted the registry for AndroidBootFolder (string) to andboot so that it searches in the subfolder.
Manual boot of android works fine and dualboot also boots when i turn the phone on.
I've tried several things, but nothing seems to work
I hope someone can help me out with this!
popobag said:
Hi there,
I recently installed FRX07.1 Android for my HTC Blackstone.
All is working well, but I have a problem using GEN.Y Dualboot to autoboot android.
I am using the following things:
Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card: http://forum.xda-developers.com/showthread.php?t=623792
**Complete FroYo Bundle** FRX07.1 - Maintenance Release - http://forum.xda-developers.com/showthread.php?t=1167324
Gen.Y Dualboot DOES detect android, but I get an error saying: "An error occurred on sub__main_bootandroid. Win32Exception Continue?"
I have my android on an SD card in a subfolder called andboot and I have editted the registry for AndroidBootFolder (string) to andboot so that it searches in the subfolder.
Manual boot of android works fine and dualboot also boots when i turn the phone on.
I've tried several things, but nothing seems to work
I hope someone can help me out with this!
Click to expand...
Click to collapse
Hi,
I fixed this problem
You must install .NET Compact Framework 3.5 on your device.
Name of install pack: NETCFv35.wm.armv4i.cab
https://code.google.com/p/pocketwit/downloads/detail?name=NETCFv35.wm.armv4i.cab&can=2&q=