I'm really, really sorry if i posted this in the wrong section or what else.
I'm having problems using the Gen.Y dualboot system on my kaiser, I installed the CAB for the HTC Kaiser.
It works... but only when opening the bootmanager when Windows Mobile 6.1 is already booted, there is no way to first load the bootmenu from Gen.Y and then choose to boot Windows Mobile or Android.
The Android is installed correctly and the registry is set well to boot from the Andboot map on my SD card so there's no problem booting android.
It's just that the bootmanager doesn't startup when turning on the phone.
(I'm running Eclair 2.1g Polymod Light-Themed)
I hope someone can be of help and i really appreciate whoever even thinks of answering a possible solution.
Syntax1993
Related
Helloo guys, Was wondering if this was made/adapted to work on the XDA Orbit II ...
Using GenY DualBOOT link: http://forum.xda-developers.com/showthread.php?t=623792
If someone as tested it and was successful can you post some step by step stages on how to do it/ set it up.
Thanks, James
i ran it from inside windows mobile, with a sdcard android rom normally installed and everything was autodetected each time i hard reseted my device
Very easy to use and configuration less, enjoy
may i have step by step to install android then can detect on dual boot? i was trying to install android but when i restart the device..dual boot can't detect and say android missing..i trying to edit registey..but nothing happen..please help me.
Hi all.
I'm using XDAndroid Froyo FRX06 (Latest), on an HTC Touch Pro2(RHOD210).
And I have a couple of questions:
1) Does android has to be started-up manually from Windows? I wish XDAndroid would be the primary OS and start up whenever I start the phone.
2)The end button and the ON/OFF button does the same. I searched but couldn't find how to chane its behaviour in this specifc build.
Thanks In Advance, and please excuse my newbism
I believe that it has to be turned on Manually but there is a software that will give you the option boot into android when you switch on the phone
Could you be more specific please?
Anyone? (sry for the bump)
It's an app called Gen.Y Dualboot. Windows has to start first (before you can open the app) but it's still faster than clicking haret.exe.
Thanks David,
2 questions:
1)Is there a way for the phone to start android exclusivly? I searched around, and found some ROMs that should do it according to some people but couldn't really find one, and I'm not sure they'd be compatiable with me Touch Pro2(RHOD210).
2) Is Gen.Y Dualboot compatiable with Touch Pro2(RHOD210)
Thx in advance.
zoobooboozoo said:
Thanks David,
2 questions:
1)Is there a way for the phone to start android exclusivly? I searched around, and found some ROMs that should do it according to some people but couldn't really find one, and I'm not sure they'd be compatiable with me Touch Pro2(RHOD210).
2) Is Gen.Y Dualboot compatiable with Touch Pro2(RHOD210)
Thx in advance.
Click to expand...
Click to collapse
1) I think not. Not sure exactly because I have Xperia X1 (I think this is only possible for HD2)
2) Yes. As far as I know, it's compatible with every WinMo phone (there are also different resolution versions of the app)
I'm Trying to install Android in my china phone with much tutorials i found in internet, about windows mobile 6.5 phones booting android, but i dont know where to start from
someone can tell me a specific GenY or Android mod (Xdandoid for example) for my phone? if dont know, a version with WQVGA support? needs or have a tutorial?
my phone is a Nexus MF168 (same as MF68)
CPU 360MHZ HI-SILICON K3, Processor MTK 6235
Dcual SIM (i dont need dual sim, its not a problem for me)
Windows mobile 6.5
thanks for help and sorry for confusing post
EDIT: i tried XDAndroid (http://forum.xda-developers.com/showthread.php?t=601751), formated sd to FAT 32, put all files in root(include the .txt file), and after i execute appear:
"HaRET Boot
Shutting Down Hardware
Turning of MMU...
PSR=600000df"
and anyting more, i need to remove battery to restart phone, some help? a specific version for this phone? its low after this or really crashed?
thanks for help
I didnt see an obvious section for xdandroid questions, so i hope its okay to post a couple here; forgive me and redirect me if not, please...
1. I'm running xdandroid frx07 on my htc touch pro off the sdcard. Is it possible to swap sdcards while running the xdandroid system? im guessing no.
2. If I cant hot swap the sd card, then (this may be silly to some but I'm tired) are there any android specific files that can NOT be read by Windows Mobile 6.1?
3. Is it possible to install xdandroid to the device itself so as to free up the sd card for normal data storage and transport between devices? For instance, I would like to install it to "\(lowest possible dir)\xdandroid\" instead of "\sdcard\" ("I know I probably won't be able to completely over-write the WM6x OS, so Windows will have its own folder tree branch and xdandroid will have its own as well. I already have Haret in the WM startup list so I never see WM except for when I boot without the sd card inserted (Haret just errors out because it cant find the files to boot linux).
4. I also would like to know if anyone knows where I can find and turn OFF everything that actually uses or relies on the Sprint/CDMA cellular network (I dont have a carrier, I use it strictly on wi-fi as a miniature internet terminal/remote control for PC & PS3). I would love it if someone could direct me toward a generic/non-carrier branded ROM to flash, that would do the trick!
5. Just kidding; I won't write another question yet, I think these are good enough for now. Thanks in advance for any and all serious responses
Hey there,
The touch pro is in the legacy device forums, here is the rom link fyi : http://forum.xda-developers.com/showthread.php?t=1171070.
You would be better off asking for help in that thread
Hi there,
I recently installed FRX07.1 Android for my HTC Blackstone.
All is working well, but I have a problem using GEN.Y Dualboot to autoboot android.
I am using the following things:
Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card: http://forum.xda-developers.com/showthread.php?t=623792
**Complete FroYo Bundle** FRX07.1 - Maintenance Release - http://forum.xda-developers.com/showthread.php?t=1167324
Gen.Y Dualboot DOES detect android, but I get an error saying: "An error occurred on sub__main_bootandroid. Win32Exception Continue?"
I have my android on an SD card in a subfolder called andboot and I have editted the registry for AndroidBootFolder (string) to andboot so that it searches in the subfolder.
Manual boot of android works fine and dualboot also boots when i turn the phone on.
I've tried several things, but nothing seems to work
I hope someone can help me out with this!
popobag said:
Hi there,
I recently installed FRX07.1 Android for my HTC Blackstone.
All is working well, but I have a problem using GEN.Y Dualboot to autoboot android.
I am using the following things:
Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card: http://forum.xda-developers.com/showthread.php?t=623792
**Complete FroYo Bundle** FRX07.1 - Maintenance Release - http://forum.xda-developers.com/showthread.php?t=1167324
Gen.Y Dualboot DOES detect android, but I get an error saying: "An error occurred on sub__main_bootandroid. Win32Exception Continue?"
I have my android on an SD card in a subfolder called andboot and I have editted the registry for AndroidBootFolder (string) to andboot so that it searches in the subfolder.
Manual boot of android works fine and dualboot also boots when i turn the phone on.
I've tried several things, but nothing seems to work
I hope someone can help me out with this!
Click to expand...
Click to collapse
Hi,
I fixed this problem
You must install .NET Compact Framework 3.5 on your device.
Name of install pack: NETCFv35.wm.armv4i.cab
https://code.google.com/p/pocketwit/downloads/detail?name=NETCFv35.wm.armv4i.cab&can=2&q=