Database Info

[Q] Help with infusion kernel v1.1

Hey, i am running on infused v2.1.0 and i have transfuzion theme. Anyway i tried to flash the kernel and i thought i did it right went to recovery mode then falsh zip from sd watever then reboot consol. i go back to my About Phone and still no infusion 1.1 it says : Kernel Version 2.6.35.7-I1997RUXKG-3-CL366622... Any help would be appreciated ! Thank you for your time .

IrInfuseD said:
Hey, i am running on infused v2.1.0 and i have transfuzion theme. Anyway i tried to flash the kernel and i thought i did it right went to recovery mode then falsh zip from sd watever then reboot consol. i go back to my About Phone and still no infusion 1.1 it says : Kernel Version 2.6.35.7-I1997RUXKG-3-CL366622... Any help would be appreciated ! Thank you for your time .
Click to expand...
Click to collapse
I'm pretty sure that is the Infusion kernel. If you read the rest it should say [email protected] # infusion gb

I'd suggest downloading Voltage Control and seeing what options you have in there. You'll know you installed it correctly if you see speeds up to 1600 in there. Plus it's a good tool if you want to Under Voltage a little bit to help on battery life.

Kernel Version number is 2.6.35.7-1997RUXKG3-CL366622 for infusion 1.1. Your good.

TheCajun said:
Kernel Version number is 2.6.35.7-1997RUXKG3-CL366622 for infusion 1.1. Your good.
Click to expand...
Click to collapse
Actually that version string is useless for determining which kernel you're running other than "based on Rogers Gingerbread" - since the proprietary Samsung modules force kernel devs to avoid doing anything that modifies that string. (Modify that string = device will not boot.)
The best way to figure out which kernel you're running are:
1) Featureset. If you have frequencies higher than 1200 MHz you're running Infusion as it's the only overclock kernel there is. If you have netarchy-style voltage control but no overclock, you're likely on my Daily Driver. If you have neither, you're probably on Hellraiser or the stock Infused ROM kernel.
2) Build username/host of the kernel to determine who built it. If you look back through my posts you should find one with a list of a few known user/host combos for various kernel devs.

Thanks for the replies guys! I checked in my voltage control i have the 1600mhz in there but i dont really know how to set them... ive looked around i did something but im not sure if thats the best set up. I sitll do not know if i am running on infusion 1.1 i have infused 2.1 for sure but not sure about the kernel. Anyway thanks for the reply guys the help is much appreciated but IF you can help me figure out this voltage thing it'll be great! Also i have downloaded the tranzfusion theme and i dont really like it is there anyway i can delete it?

Entropy512 said:
Actually that version string is useless for determining which kernel you're running other than "based on Rogers Gingerbread" - since the proprietary Samsung modules force kernel devs to avoid doing anything that modifies that string. (Modify that string = device will not boot.)
The best way to figure out which kernel you're running are:
1) Featureset. If you have frequencies higher than 1200 MHz you're running Infusion as it's the only overclock kernel there is. If you have netarchy-style voltage control but no overclock, you're likely on my Daily Driver. If you have neither, you're probably on Hellraiser or the stock Infused ROM kernel.
2) Build username/host of the kernel to determine who built it. If you look back through my posts you should find one with a list of a few known user/host combos for various kernel devs.
Click to expand...
Click to collapse
Sorry didnt know this, thanks for the correction. I dont like giving people bad info.
---------- Post added at 10:05 PM ---------- Previous post was at 09:58 PM ----------
IrInfuseD said:
Thanks for the replies guys! I checked in my voltage control i have the 1600mhz in there but i dont really know how to set them... ive looked around i did something but im not sure if thats the best set up. I sitll do not know if i am running on infusion 1.1 i have infused 2.1 for sure but not sure about the kernel. Anyway thanks for the reply guys the help is much appreciated but IF you can help me figure out this voltage thing it'll be great! Also i have downloaded the tranzfusion theme and i dont really like it is there anyway i can delete it?
Click to expand...
Click to collapse
If you installed 1.1 and voltage control tells you can OC to 1600 then you have 1.1 installed. People use different setups for the Overclocking. use Cfq as scheduler and Ondemand as governor. make sure you turn on 1600 by hitting the red button next to it if you already havent. dont use more than 5-6 mhz speeds at one time. I use 200 400 800 1200 1600.

Just to the OP...the easiest way to me to flash a kernel is simply by downloading SGS Kernel Flasher, selecting the kernel, and flashing it. It's about as painless as you can get.

Thanks for the replies guys much appreciated !

Acura rom newline v3 problem!!

HELLO! I had acura rom 7.1...i flashed the new rom Acura newline v3 and after i install the baseband v10k but if i boot the phone it reboots continuosly! PLEASE HELP ME!!

wipe your data/factory reset.

i did it 3 times but nothing!

marcoasroma said:
i did it 3 times but nothing!
Click to expand...
Click to collapse
Flash the v10k kdz then root and flash the rom worked for me...

search SetCpu or nfrills cpu and LOWER the OC.
the rom is overclocked at 1300mhz, and i don't think that our 3d can handle that much oc.
costi

bestiuta said:
search SetCpu or nfrills cpu and LOWER the OC.
the rom is overclocked at 1300mhz, and i don't think that our 3d can handle that much oc.
costi
Click to expand...
Click to collapse
How can he do that if his phone restarts constantly lol...

Exactly after install skip the setup and go to setcpu and set lower oc.i think we need to edit the values for max cpu frec at boot,probably init.d or build.prop? I will search and see.
Sent from my LG-P920 using XDA App

i got he same problem too
how can we lower the default CPU freqeuncy at boot but not in setcpu
any suggestion is found!?
thx all

No use of OC

Hi all.I tried many times and test the owerclock ,i am using setcpu.But i see no difrenc,phone is alway the same,playing games is the same on 677mhz as 1200,and between,watching pictures also the same,i see no diference,what is the problem,i need some bust for games,how to get this.Phone working fine but no diference.

What kernel do you use?

Setcpu doesnt work on stock the samsung rom...u need a custom rom........
Sent from my GT-I5800 using xda premium

Hellhound7 said:
Setcpu doesnt work on stock the samsung rom...u need a custom rom........
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
nah...setcpu works just fine on stock rom with stock kernel..only thing is ....u have to be rooted
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus' Rom v 1.0
powered by
Team G3mod-ICS26 kernel by Arakmar
~~~~~~~~~~~~~~~~~~~~~~~~~

rkoby13 said:
nah...setcpu works just fine on stock rom with stock kernel..only thing is ....u have to be rooted
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus' Rom v 1.0
powered by
Team G3mod-ICS26 kernel by Arakmar
~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
It works on stock kernel when rooted only, thats right, but you can't overclock past 667 Mhz is what Hellhound means I think. You can set it to whatever you like if you dont use the autodetection though, but that is only visual, the actual clock doesn't go past 667 Mhz on stock.

I use:kyrillos rom 9.3 with kernel g3mod 2.2.2 OC 2.4.1oc.and doutch rom 5,2 with same kernel g3mod 2.2.2OC and 2.4.1OC.I tried even with NONoc,no difrence,on every custom ROM i see lag,going true menu,is just not smood inaf

I assume that you have moved your dalvik cache to external sd
move it back to internal and have fun
Please check the ./data2sd.log, if I am on the right side or may assumption is wrong.
-> paste the content of that file here and I know more
lagging is not a symptom of slow CPU, moreover of a slow sd card
cheers
qaysed

I did not move anithing to sd,it is just usual flashing ROM.i even remove sd,and it is the same.ex:game is instaled on phone not on sd,but intire menu is laging,phone works,sims to be fine,but... I open new tread "problems problems problems".but is closed and i d not andstend message writen there.i Have problems in cwm,only able to flash with ODin,flashing in cwm give me problems,error messages:E:Cant't mount/dev/block/mmcblkop2(file exists)
E:can't chown/mod/data/app(no such file or directory)
E:Failure at line 57:set_perm 1000 1000 0771 DATA:app Installation aborted

SoLoSaroman said:
I did not move anithing to sd,it is just usual flashing ROM.i even remove sd,and it is the same.ex:game is instaled on phone not on sd,but intire menu is laging,phone works,sims to be fine,but... I open new tread "problems problems problems".but is closed and i d not andstend message writen there.i Have problems in cwm,only able to flash with ODin,flashing in cwm give me problems,error messages:E:Cant't mount/dev/block/mmcblkop2(file exists)
E:can't chown/mod/data/app(no such file or directory)
E:Failure at line 57:set_perm 1000 1000 0771 DATA:app Installation aborted
Click to expand...
Click to collapse
The Mod moved your "problems problem problems" post to the proper thread:
http://forum.xda-developers.com/showthread.php?t=1058071&page=251
its over there now, and someone allready send a reply! Check it out, maybe it solves your problem.

Wiggierip said:
It works on stock kernel when rooted only, thats right, but you can't overclock past 667 Mhz is what Hellhound means I think. You can set it to whatever you like if you dont use the autodetection though, but that is only visual, the actual clock doesn't go past 667 Mhz on stock.
Click to expand...
Click to collapse
Yes...dats what i ment...lol....you can underclock but cant overclock past 667 mhz...
Sent from my GT-I5800 using xda premium

[Q] Remove CPU Speed Limit in Android 2.2

How to Remove the CPU Speed limit of 600Mhz on Android 2.2, When I use Andoird 2.3 on this Device [Commtiva Z51], I am able to Clock the CPU at ~800Mhz, I want to do this on Android 2.2, I have a rooted Device.

Maybe a CPU Tuner
I am sure you can find a free one on Google Play you should take a look.

akshatcool12345 said:
How to Remove the CPU Speed limit of 600Mhz on Android 2.2, When I use Andoird 2.3 on this Device [Commtiva Z51], I am able to Clock the CPU at ~800Mhz, I want to do this on Android 2.2, I have a rooted Device.
Click to expand...
Click to collapse
What you are referring to is known as overclocking (oc)...in order to overclock, you need a custom kernel, since (mostly) the stock kernel doesnt support oc
...
[Fyi, Android 2.3 is better than 2.2 in a lot of ways...]
I.AM.H3RO said:
I am sure you can find a free one on Google Play you should take a look.
Click to expand...
Click to collapse
??? What are you trying to tell??
Typed using a small touchscreen

I already have No-frills CPU control from the play store and it works but not over 600Mhz and yes, it is Overclocking (OC), I am running a custom rom, Android 2.3 Roms are available but i am not using those as they drain the battery really fast (even without overclocking). It seams like it is a limitation with Android 2.2 as I have tried other Roms also and they too have the same problem.

No nothing like that...
Oc is kernel dependent...you can make an oc kernel for froyo also...
And if you oc, you will get faster battery drain, and maybe heat issues...
Typed using a small touchscreen

Overclocking
Currently I am using this Rom (Jellybean <link> slinkme.co.cc/jellybean <link> [Added like this as I cant add links now]) , As far as I know this supports overclocking. And also if this kernel does not support Overclocking, Can you give me a OC kernel for Android 2.2.1 (This Rom).

All devices are different, and so is their kernel/rom/etc....you cannot use stuff for my device on yours...
And jellybean is sypposed to be android 4.x/5...and not 2.2.1
Give me a screenshot of the stuff written in about phone...then maybe I can point you to the right direction...
Typed using a small touchscreen

Jellybean is my Rom name, it is Android 2.2.1, I want a Kernel that Supports OC, Do you have one ? Android Jellybean is 4.1.
My Device : http:~//~slinkme.co.cc/mydevice (Remove ~ for the link)
My Rom : http:~//~slinkme.co.cc/jellybean (Remove ~ for the link)

Not very original calling it jelly bean
Sent from my GT-S5360 using XDA

Firstly, I just don't blankly visit random websites...
And secondly, I asked for screenshot for about phone...
If you want help, you've got to LET ME HELP!
Or just plain get ignored...
Typed using a small touchscreen

Just flash an overclock kernel, then install setcpu and overclock

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

a.cid said:
Firstly, I just don't blankly visit random websites...
Click to expand...
Click to collapse
That (slinkme.co.cc) is just a URL Shortener Website like goo.gl.....
a.cid said:
And secondly, I asked for screenshot for about phone...
Click to expand...
Click to collapse
I have changed all that but you might need the kernel version so this is it...
Kernel Version: Apps_2.6.23.9

Crash_HF said:
Just flash an overclock kernel, then install setcpu and overclock
Click to expand...
Click to collapse
I know that, Can you give me kernel that supports Overclocking..
I already have setCPU, No-Frills CPU Control, Antutu CPU Master..

Can anybody help me please !!
Sent from my Z71 using xda premium

i think you can use Set CPU. you can find its on google play or appstore.vn/a

the easiest way...ask your rom developer to make a kernel with OC support. you can't compile a kernel for your device and neither me since I don't even know what your device is.

thanhhai8888 said:
i think you can use Set CPU. you can find its on google play or appstore.vn/a
Click to expand...
Click to collapse
I already have setCPU , No frills and antutu CPU master.
I need to flash a OC kernel to the device but I can't find one.
Sent from my Z71 using xda premium

akshatcool12345 said:
I already have setCPU , No frills and antutu CPU master.
I need to flash a OC kernel to the device but I can't find one.
Sent from my Z71 using xda premium
Click to expand...
Click to collapse
You really should listen to these guys & ease up on the attitude. YOU'RE the one needing help and they really are trying.
What kind of PHONE do you have & ROM are you running? THAT determines the kernel.

Be carefull,
It can damage your device...

[Q] Flash new kernel in cyanogenmod 10.1 nightlies on my tf300t

Hello xda forums, I've done a lot of research and I can't find anything conclusive about this issue...
How do I flash a new kernel on my asus tf300t with custom rom cm10.1 nightlies? I want to do this because I can't overclock over 1.3 ghz .
I'm really happy with this rom on performence mode , but in heavier games like gta vice city it still lags a lot, so I'm guessing higher freq > better gamming experience. Please help this poor child :'( . And if I'm reposting or something, u have my sincere apologies.
Thank u so much for the help and I hope this post can help as many as possible.

Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboot and enjoy
Sent from my LT18i

I use Cyanogenmod 10.1, CM's kernel is so good. Problem is in I/O. If you don't want to your apps lagging, you will have to move your apps to MicroSD class 10

zaki0saad said:
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboott from my LT18i
Click to expand...
Click to collapse
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help

absinto10 said:
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
Click to expand...
Click to collapse
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik

ricco333 said:
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
Click to expand...
Click to collapse
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much

absinto10 said:
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
Click to expand...
Click to collapse
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik

ricco333 said:
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
Click to expand...
Click to collapse
Thank u so much man. So just replacing the blob didn't really work so I had to install Surdo's cm10.1 over my installed rom(cm10.1 too)>then wipe dalvik + cache and voila
Now I can overclock to 1.7 ghz
Source of Surdo's cm10.1 oc to 1.7 ghz for tf300t: http://forum.xda-developers.com/showthread.php?t=2112369
Thank u once again and hope this post can help others with the same issue

Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Tunable with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tablet oozes butter, it's that smooth

Ti2 said:
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Table with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tabt oozes butter, it's that smooth
Click to expand...
Click to collapse
Hello man, so i finally figure it out, how to use perf kernel in cm10.1, and OMG it's so freaking amazing I've tunned up my cpu speed between 200 mhz and 1600 mhz in interactive mode, when gamming I use performance mode up 1.7ghz and 706 mhz gpu... Well I hope I'm not pushing to much of little tf300t xD
Thank u so much Ti2.
Ps. I use trickster insted of f.kernel app... Works really good too

You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.

Ti2 said:
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Click to expand...
Click to collapse
Yeah you are probably right. Gpu with 706 oc it's to much and very unstable. When I play heavy games like Vice city and nova 3, the best settings I've found were 1.7ghz performance mode and gpu with standart perf settings(600mhz). So if u want a stable gamming experience on the tf300t, I would recommend this settings.

help?
Hello. I've flashed CM 10.1 and perf kernel and it oc my cpu to 1.7, which is good' but I can't find where to oc my gpu, can you help me?